Used Milling Turning for sale (15,428)

Condition: used, Year of construction: 2017, functionality: fully functional, GENERAL SPECIFICATION PUMA GT 2100M 1.1. CAPACITY : - Swing over bed (interference with front cover) / : 600 mm - Swing over saddle: 390 mm - Recomended turning diameter : 210 mm - Max. turning diameter : 300 mm - Max. work length : 513 mm - Bar working diameter : 65 mm - Max. permissible mass (including chuck) : o Chuck work : 150 kg o Shaft work : 300 kg - Base structure o Bed slant angle:30 deg. o Guideway type: Box guide 1.2. MAIN SPINDLE : Gsdpfex Ecwaex Abrjtu - Drive mechanism : Belt-drive - Chuck size : 210 mm - Motor power (15 min / cont.) : 18,5 / 15 Kw - Spindle speed : 4.500 rpm 1.3. CARRIAGE : - Travel : o X axis : 230 mm o Z axis : 580 mm o C axis : 360 grade (in 0.001) - Rapid traverse rate : o X axis : 24 m/min o Z axis : 30 m/min o C axis : 200 rot/min - Continuous thrust force : o X axis : 6207 N o Z axis : 11305 N - Intermittent thrust force : o X axis : 9931 N o Z axis : 16958 N - Ballscrew (diameter x lead) : o X axis : 32 x 10 mm o Z axis : 32 x 10 mm - Servo motor: o X axis : 1,8 kW o Z axis : 3,0 kW 1.4. ACCURACY : - Positioning : o X axis : 0,01 mm o Z axis : 0,02 mm o C axis : 0,0167 degrees

Condition: like new (used), Year of construction: 2007, operating hours: 1,800 h, functionality: fully functional, * Mori Seiki NL 2500 SY. * Included equipment value: 20,000 - 25,000 euros. * Year: 2008. * Only 1,800 cutting hours. * 5-axis machine. * Subspindle. * 12-station turret, all positions driven. * Y-axis travel: ±60 mm. * C-axis on both spindles. * Main spindle integrated motor: 18 kW. * Subspindle integrated motor: 15 kW. * Direct drive motor for driven tools: 5.5 kW. * Motor starting torque: 640 Nm. * Beltless and gearless motors. * Main spindle nose size: A2-8. * Subspindle nose size: A2-6. * Bar capacity: 80 mm. * Main spindle chuck: Kitagawa B-210, 250 mm, metric system. * Subspindle chuck: Kitagawa B-208, 210 mm, metric system. * Box guideways on all axes. * Main spindle speed: 4,000 rpm. * Driven tool speed: 6,000 rpm. * Oil cooler for both spindles: Daikin. * Conversational automatic programming system: Mapps 4. * Automatic load control and tool consumption monitor. * Rapid traverse speed: 30 m/min on X and Z axes. * Turret index change time: 0.2 seconds. * Two Renishaw arms for automatic tool measurement. * Communication ports: USB, PCMCIA card, and RS-232. * Bar feeder installation interface. * Automatic parts catcher. * Dual foot pedal for independent opening/closing of main and subspindle chucks. * Side-mounted hinge-type chip conveyor. Gtsdpfx Aeyh Azvebrsu * Extensive set of static and driven tool holders. * Electrical transformer. * Documentation included: parts list, electrical schematics, programming and operation manuals. * Weight: 5,800 kg. * Machine currently in operation. * Precision videos must be checked. * Only used for prototyping AOG aeronautical components in aluminum. * Immediate delivery unless sold prior.

Condition: like new (used), Year of construction: 2009, functionality: fully functional, * Okuma LB 3000 MY. * Included equipment value: €20,000-24,000. * 4-axis machine. * Fully independent programmable tailstock with Z-axis movement and M-code clamping. * 12-station turret, all positions powered. * C-axis. * Y-axis. * Integrated main spindle motor, 18.5 / 22 kW. * Driven tool motor, 5.5 kW. * Spindle starting torque: 620 Nm. * Integrated, beltless drive. * Main spindle nose: A2-8. * Tailstock Morse taper: MT5. * Bar capacity: 75 mm. * Kitagawa B-210 spindle chuck. * Box guideways on all axes. * Main spindle speed: 4,200 rpm. * Driven tool speed: 4,000 rpm. * Max swing: 520 mm. * Max machining diameter: 380 mm. * Max machining length: 1,050 mm. * Oil chiller for spindle. * IGF OSP P200-L conversational automatic programming system. * Automatic cutting force control and tool power consumption monitoring. * Parameterized tool collision-avoidance system. * Tool life management and monitoring. * Rapid traverse rates: 20 and 25 m/min on X and Z axes. * Turret indexing time: 0.2 seconds. * Renishaw automatic tool setter arm. * Communication ports: USB, PCMCIA card, and RS-232. * Dual pedal for chuck and tailstock open/close operation. * Side-hinged chip conveyor. * Complete set of external and internal static toolholders. Gtedpfoyh Axbjx Abrou * Complete set of axial and radial driven toolholders. * Electrical transformer. * Documentation: parts list, electrical diagrams, programming, and operator manual. * Weight: 6,200 kg. * Machine currently in operation. * Immediate availability unless previously sold.

Condition: new, Year of construction: 2023, functionality: fully functional, HYUNDAI-WIA SE2200LY WITH FANUC 0i-T PLUS CONTROL CNC LATHE WITH Y AXIS. TURRET UPGRADE - 12 STATION 24 POSITION BMT45, LIVE TOOLS 6K RPM, 2.75 KW MACHINE CONSTRUCTION & FEATURES ▪ 8” STANDARD CHUCK SIZE. ▪ 30° SLANT BED ONE PIECE HEAVY DUTY CAST IRON CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. ▪ HIGH PERFORMANCE ROLLER LM GUIDEWAYS. ▪ 12 STATION HIGH SPEED RIGID SERVO DRIVEN TOOL TURRET - BMT45. [24 POSITION OPTION] ▪ 4,500 RPM HIGH POWER MAIN SPINDLE. ▪ 30 X 36 M/MIN RAPID TRAVERSE RATES – X & Z AXES. ▪ C-AXIS SPINDLE & WEDGE TYPE Y-AXIS. Swing Over the Bed Ø 600 MM Swing Over the Carriage Ø 600 MM Gjdpox Tqkmefx Abrstu Maximum Turning Diameter Ø 300 MM Maximum Turning Length 508 MM Bar Capacity – Main Spindle Ø 65 MM MAIN SPINDLE Chuck Size Ø 8” - 203 MM Spindle Bore Ø 75 MM Spindle Speed 4,500 RPM Motor (Max / Cont.) 15.0 / 11.0 KW Torque (Max / Cont.) 167 [150.3] NM Spindle Type BELT Spindle Nose A2-6 FEEDS Travel X 210 MM Travel Y 110 (± 55) MM Travel Z 560 MM Rapid Speed X 30 M / MIN Rapid Speed Y 10 M / MIN Rapid Speed Z 36 M / MIN Slide Type ROLLER LM GUIDEWAYS TURRET Number of Tools 12 [24 POSITION INDEX] Tool Size - OD 20 MM² Tool Size - ID Ø 32 MM Indexing Time 0.15 SEC / STEP Y-Axis Type WEDGE TYPE Milling Tool Speed 6,000 RPM Motor (Max / Cont.) 2.75 / 1.85 [2.8 / 3.8] KW Torque (Max / Cont.) 26.2 [27.0] NM Collet Size ER 20 - Ø 13 Type BMT45 HYDRAULIC NC TAIL STOCK (STD. LIVE CENTER) Taper MT#4 Quill Diameter Ø 56 MM Travel 580 MM Coolant Tank 200 L POWER SUPPLY Electric Power Supply 18 KVA Thickness of Power Cable OVER 16 MM² Voltage 415V / 50HZ / 3PH Floor Space (L x W) 2,960 X 1,730 MM Height 1,920 MM Weight 4,200 KGS STANDARD FACTORY FITTED MACHINE OPTIONS SPINDLE POSITIONING MAIN - 0.001 DEG INDEX (C1-AXIS) CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 8 INCH 3-JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR FOR FANUC FOR STANDARD CNC SPECIFICATION - SEE MANUFACTURER'S BROCHURE HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) MANUAL VIEWER OPERATION MEMO PART PROGRAM STORAGE - 2MB (1,000 REGISTERABLE PROGRAMS) PREMIUM TOOL OPERATION SCHEDULING SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD COOLANT TANK 200 LITRES FULL SPLASH GUARDING SYSTEM STANDARD HYDRAULIC UNIT 35 BAR (15 LITRES) CALL LIGHT (1 COLOUR) BACK SPIN TORQUE LIMITER FRONT DOOR INTERLOCK TOOLBOX MAIN SPINDLE - 4,500 RPM, 15.0 / 11.0 KW, 167 NM BELT DRIVEN STANDARD TOOLING PACKAGE - SEE MANUFACTURER'S BROCHURE HYDRAULIC TYPE NC TAILSTOCK - MT#4 56 MM QUILL, STD LIVE CENTER 12 STATION BMT45 TURRET, LIVE TOOLS 6K RPM, 2.75 KW, 26 NM INCLUDED FACTORY FITTED MACHINE OPTIONS CHIP - BUCKET STANDARD CONVEYOR SIDE HINGED HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD CALL LAMP (3 COLOUR) - IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE TRANSFORMER - 415V 3PH 50HZ QUICK TOOL SETTER - AUTO QUILL FORWARD / REVERSE CONFIRMATION DEVICE

Condition: excellent (used), Year of construction: 2012, Maximum turning diameter 406mm, Gtjdpfsx T Dhlsx Abreu Maximum turning length 520mm, bar capacity 65mm, Y axis -/+ 51mm, Spindle speed, 4,500 rpm, sub-spindle speed 4,500 rpm, milling speed 5,000rpm, 12 station turret, 18.5 kw main motor, C axis 0.001degrees, Fanuc I series control, parts catcher, tool setter, swarf conveyor, 3 jaw chucks to main and sub spindles, Iemca magazine barfeed

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Offered here is a lathe from the manufacturer Mori Seiki with double turret, a C-axis and driven tools. Gedpeyh I H Dsfx Abrotu The machine is in very good condition and can be inspected and tested in our facility. The scope of delivery includes 4x driven tool holders.

Condition: new, Year of construction: 2022, functionality: fully functional, HYUNDAI-WIA HD2200Y FANUC 0IT PLUS CNC LATHE WITH Y AXIS. MACHINE CONSTRUCTION & FEATURES ▪ ONE PIECE HEAVY DUTY CAST IRON BED CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. ▪ 4,000 RPM MAIN SPINDLE. ▪ 6,000 RPM LIVE TOOLING SPEED. ▪ HEAVY DUTY CUTTING WITH EXCELLENT PERFORMANCE. ▪ WEDGE TYPE Y-AXIS. ▪ 12 STATION HIGH SPEED RIGID SERVO TURRET - BMT55P ▪ HARDENED & GROUND BOX GUIDEWAYS Swing Over the Bed Ø 820 MM Swing Over the Carriage Ø 650 MM Maximum Turning Diameter Ø 300 MM Maximum Turning Length 610 MM Bar Capacity – Main Spindle Ø 65 MM MAIN SPINDLE Chuck Size Ø 8” - 203 MM Spindle Bore Ø 76 MM Spindle Speed (Rpm) 4,000 RPM Motor (Max / Cont.) 18.5 / 15.0 [22.5 / 15.0] KW Torque (Max / Cont.) 206.2 / 125.4 [215.0 / 143.3] NM Spindle Type BELT Spindle Nose A2-6 Travel X 215 MM Travel Y 110 (± 55) MM Travel Z 680 MM Rapid Speed X 24 M / MIN Rapid Speed Y 10 M / MIN Rapid Speed Z 30 M / MIN HARDENED & GROUND BOX GUIDEWAYS Number of Tools 12 [24] Tool Size - OD 25 MM² Tool Size - ID Ø 20 MM Indexing Time 0.2 SEC / STEP Y-Axis Type WEDGE TYPE LIVE TOOL Motor (Max / Cont.) 5.5 / 3.7] KW Milling Tool Speed 6,000 RPM Torque (Max / Cont.) 52.5 / 26.5 NM Collet Size Ø 16 – ER25 Type BMT-55P TAILSTOCK Taper MT 4 Quill Diameter Ø 80 MM Quill Travel 120 MM Travel 680 MM TANK CAPACITY Coolant Tank 200 L Gjdpfx Ajx Th Nyjbrstu Lubricating Tank 2.0 L Electric Power Supply 27 KVA Thickness of Power Cable OVER 25 MM² Voltage 415 V / 50 HZ / 3PH Floor Space (L x W) 3,380 x 1,800 MM Height 1,950 MM Weight 4,700 KGS INCLUDED FACTORY FITTED MACHINE OPTIONS CHIP - BUCKET STANDARD CHIP - CONVEYOR SIDE HINGED HIGH PRESSURE COOLANT SYSTEM 6.0 BAR IN LIEU OF STD CALL LAMP (3 COLOUR) - IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE 30 KVA TRANSFORMER AND CABLE QUICK TOOL SETTER - AUTO PROGRAMMABLE TAILSTOCK IN LIEU OF STD TURRET UPGRADE - 12 STATION 24 POSITION BMT55P, LIVE TOOLS 6K RPM, 5.5 KW STANDARD FACTORY FITTED MACHINE OPTIONS SPINDLE POSITIONING MAIN - 0.001 DEG INDEX (C1-AXIS) CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 8 INCH 3 JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR FOR FANUC HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) COOLANT TANK (SIDE TYPE) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD HYDRAULIC UNIT 35 BAR (30 LITRES) CALL LIGHT (1 COLOUR) FRONT DOOR INTERLOCK TOOLBOX STANDARD TOOLING PACKAGE QUILL TYPE TAILSTOCK WITH STD LIVE CENTER

Condition: new, Year of construction: 2023, functionality: fully functional, HYUNDAI-WIA HD3100YA FANUC 0IT PLUS CNC LATHE WITH Y AXIS MACHINE CONSTRUCTION & FEATURES ▪ ONE PIECE HEAVY DUTY CAST IRON BED CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. ▪ 3,500 RPM MAIN SPINDLE. ▪ 5,000 RPM LIVE TOOLING SPEED. ▪ HEAVY DUTY CUTTING WITH EXCELLENT PERFORMANCE. ▪ WEDGE TYPE Y-AXIS. ▪ 12 STATION HIGH SPEED RIGID SERVO TURRET – BMT55P ▪ HARDENED & GROUND BOX GUIDE WAYS MACHINE CAPACITIES Gedpox Thu Nofx Abrjtu Swing Over the Bed Ø 800 MM Swing Over the Carriage Ø 670 MM Maximum Turning Diameter Ø 420 MM Maximum Turning Length 760 MM Bar Capacity – Main Spindle Ø 81 MM MAIN SPINDLE Chuck Size Ø 10” - 254 MM Spindle Bore Ø 91 MM Spindle Speed (Rpm) 3,500 RPM Motor (Max / Cont.) 26.0 / 18.5 KW Torque (Max / Cont.) 734 / 522 NM Spindle Type BELT Spindle NoseA2-8 FEED Travel X265 MM Travel Y120 (± 60) MM Travel Z830 MM Rapid Speed X24 M / MIN Rapid Speed Y10 M / MIN Rapid Speed Z30 M / MIN Slide Type HARDENED & GROUND BOX GUIDEWAYS TURRET Number of Tools12 Tool Size - OD25 MM² Tool Size - IDØ 20 MM Indexing Time0.2 SEC / STEP Y-Axis Type WEDGE TYPE LIVE TOOL Motor (Max / Cont.) 5.5 / 3.7 KW Milling Tool Speed 5,000 RPM Torque (Max / Cont.) 70/0 / 35.4 NM Collet Size Ø 16 – ER25 Type BMT-65P TAIL STOCK Taper MT 5 Quill Diameter Ø 100 MM Quill Travelb120 MM Travel b830 MM Voltage 415 V / 50 HZ / 3PH Floor Space (L x W) 3,630 X 1,910 MM Height 1,960 MM Weight 6,200 KGS INCLUDED FACTORY FITTED MACHINE OPTIONS CONVEYOR & CHIP BOX HELICAL INTERPOLATION FUNCTION HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD CALL LAMP (3 COLOUR) - IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE TRANSFORMER - 415V 3PH 50HZ QUICK TOOL SETTER - AUTO MAIN SPINDLE - 3,500 RPM, 26.0 / 18.5 KW, 734 NM BELT DRIVEN PROGRAMMABLE TAILSTOCK IN LIEU OF STD QUILL FORWARD / REVERSE CONFIRMATION DEVICE QUILL TYPE TAILSTOCK - MANUAL TYPE MT#5 100 MM DIA QUILL, 120 MM QUILL TRAV STANDARD FEATURES SPINDLE POSITIONING MAIN - 0.001 DEG INDEX (C1-AXIS) CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 10 INCH 3 JAW HYDRAULIC CHUCK CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE HYDRAULIC CHUCK PRESSURE INTERLOCK - MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) PART PROGRAM STORAGE - 2MB SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD COOLANT TANK 180 LITRES FULL SPLASH GUARDING SYSTEM CALL LIGHT TOOLBOX TOOLING PACKAGE QUILL TYPE TAILSTOCK 12 STATION BMT65P SERVO TURRET, LIVE TOOLS 5,000 RPM, 5.5 KW, 47.0 NM

Condition: good (used), Year of construction: 1999, Gildemeister MF Twin 65, year of manufacture 1999, Siemens 840 D control, travel X/Z 190/555 mm, 1 x Y axis +/- 40 mm, 2 turrets with 12 stations each, driven tools, VDI 30 toolholder, C axis, spindle speed up to 6,000 rpm, max. bar passage up to 65 mm, bar feeder is included but is no longer installed on the machine. Godpoyiab Aofx Abretu

Condition: good (used), Year of construction: 2000, Turning diameter 200 mm Turning length 400 mm Control: SIEMENS SINUMERIC Gtjdsydm Tdjpfx Abrsu Number of spindles: 2 Tool changer: 2x 14 Total power requirement: 39 kW Machine weight approx. 4,800 kg Without bar feeder, machine is integrated in automatic operation Machine is still powered. Videos of the machine's functionality are available and can be provided upon request.

Condition: excellent (used), Year of construction: 2018, Sub-spindle, Y-axis, C-axis FANUC 31i B-NT-SmartX control Turning diameter max 225 mm Turning length -656 mm Chuck Diameter -210 mm Main-spindle speeds 4'500 rpm Sub-spindle speeds 6'000 rpm Turret head 1+2: 24 positions with 12 driven positions each Robot for workpiece loading Tool presetting device Misc. accessories Gedpfxevwkire Abrstu MARCELS MASCHINEN CH

Year of construction: 2006, condition: ready for operation (used), A vertical CNC turning and milling center Index is available. Spindle bore: 65mm, spindle bore in the front bearing: 110mm, spindle speed: 5000rpm, spindle power: 20kW/27kW, travel X/Z: 850mm/260mm, tool stations: 12, control: Index C200-4, operating hours: approx. 17000h. Including pallet conveyor system. Godpfx Absyifk Norotu

Condition: new, Year of construction: 2024, • CNC Lathe Hwacheon SMC 180 with Sub-Spindle Brand New!!!! • Control: Fanuc 0i-TF with Manual Guide I • Rapid traverse X / Z / B: • 36 / 36 / 36 m/min • Max. turning diameter: Ø 300 mm • Max. turning length: 528 mm • Chuck size: • 6” / Ø 150 mm, 5” / Ø 120 mm Gtodpfxsyinklo Abrsu • Max. spindle speed: • Main spindle 6,000 rpm • Sub-spindle 6,000 rpm • Bar capacity: Ø 51 / 32 mm • Main/sub-spindle motor power: • 11 / 15 kW, 3.7 / 5.5 kW • Tool turret with 12 stations, all stations driven • 5,000 rpm 3.7 / 5.5 kW • Heavy-duty one-piece slant bed made of stabilized Meehanite cast iron, with precision linear guides on all axes • High-performance spindles with A2-5 / sub A2-4 spindle nose • Automatic tool measurement arm • Parts catcher • Full enclosure • Hydraulic system • Coolant unit with retractable tank, 6 bar pump included • Ergonomic swiveling control panel • Electronic handwheel • Waterproof LED work area lighting • Hinged belt chip conveyor with 1,200 mm discharge • Foundation bolts and machine base plates

Condition: used, Year of construction: 1998, functionality: fully functional, Manufacturer/Model: GILDEMEISTER CTX 400 E Year of manufacture: 1998 Condition: Very good Location: Spain Delivery/loading possible. 12-station tool changer (driven), driven C-axis, VDI30, programmable tailstock, tool measurement arm T18, oil mist extraction unit, swarf conveyor, high-pressure pump, Turn Plus (graphical programming), Control: HEIDENHAIN Maximum turning diameter: 570 mm Gtsdpfx Ajyh E Dtobrsu Turning diameter over cross slide: 420 mm

Condition: good (used), Year of construction: 2000, Parts shown by hand not come. Tool cabinet and cutting tools not come. Only tool holders will come. Gsdpex Atyaefx Abrstu

Condition: used, Year of construction: 2006, functionality: fully functional, Large Emco and Index machine package for sale! For sale is a lot of 4 lathes, including ALL tool holders and clamping devices! - 1 x Emco 665 MC Plus with sub-spindle and 2 turrets, year 2006, including 4-meter FMB Turbo 8-80 bar feeder, year 2006 - 1 x Emco 332 Big Bore with sub-spindle and 2 turrets, year 2001, including 3-meter FMB 5-55 Turbo bar feeder, year 2016 - 1 x Emco 365 with sub-spindle and one turret, year 1997, including FMB short bar loader SL80 / 1200 / B, year 2006 (This loader was rarely used because the machine mainly served as a manual loading machine! The loader is currently stored on a shelf and has seen little use!) - 1 x Index GU 1400 (large bore) year 1988, with tailstock and steady rest (A lot of upgrades last year, e.g., new ballscrew... we currently machine precision fit parts on it daily.) All machines are in daily operation and can be inspected under power. All machines have been operated in single-shift operation. Since we are selling all lathes as part of a system changeover, this package includes a huge quantity of tool holders, clamping equipment (for all machines), and bar feed technology for all feeders — too extensive to list here! Gtodpfx Aboyifnhjrsu The entire machine package is offered including dismantling and loaded free onto customer's truck. This means there are no additional costs for dismantling and loading!

Condition: used, Macchia Milling Machine for Turned Parts - 2 working fields - Two milling spindles - Copying operation Gtedjxrpw Hopfx Abreu - Pneumatic component clamping

Condition: like new (used), Year of construction: 2024, • Control: Fanuc 0i-TF Plus LCD with Manual Guide I • Rapid traverse X / Z / B: 36 / 36 / 36 m/min • Y-axis travel: + / - 55mm • Max. turning diameter: Ø 300mm • Max. turning length: 478.5mm • Chuck size: 6” / Ø 150mm, 5” / Ø 120mm • Max. spindle speed: Main spindle 6,000 rpm / Sub spindle 6,000 rpm • Bar capacity: Ø 51 / 32mm • Main/Sub spindle motor power: 11 / 15 kW, 3.7 / 5.5 kW • Tool turret with 12 stations, all driven • 5,000 rpm 3.7 / 5.5 kW • Robust machine one-piece slant bed in stabilized Meehanite cast-iron with precision linear guides on all axes • High-performance spindles with spindle nose A2-5 / Sub A2-4 Godoyik Ruepfx Abrstu • Automatic tool measuring arm • Parts catcher • Fully enclosed guarding • Hydraulic unit • Coolant system with extendable tank, 6 bar pump • Ergonomic, swiveling control panel • Electronic handwheel • Waterproof LED work area lighting • Transformer

Condition: good (used), Year of construction: 2019, Niles N 40 MC - 6000 Turning/Milling Center, year of manufacture 2019, Siemens SI 840 D SL control, X/Z 850/6820 mm, Y axis -200 / +400 mm, B axis 0.001°, B axis swivel range -105° / +95°, tool changer with 192 positions, C axis main spindle 0.001°, spindle speed up to 1750 rpm, 2 gear stages, max. workpiece weight between chuck and tailstock 6,000 kg, drive power 87 kW, HSK 100 interface, steady rest 70 - 425 mm, tailstock. Gjdjyh Hlropfx Abrstu

Condition: good (used), Year of construction: 2022, Niles N 30 MC - 4500 turning-milling center, year of manufacture 2022, Siemens SI 840 D SL control system, travel X/Z 4756/725 mm, Y-axis +/- 250 mm, B-axis swivel range -105° / +95°, B-axis spindle speed up to 5,000 rpm, C-axis main spindle 0.001°, spindle speed up to 3,000 rpm, tailstock, steady rest, 144-position tool magazine, workpiece measurement, gear hobbing software. Gedpfx Abjyh Hk Iorstu

Year of construction: 2010, condition: ready for operation (used), A twin-spindle turning and milling center Mazak is available. Travel X/Y/Z: 580mm/160mm/1545mm, B-axis: 225°, C-axis: 360°, center distance: 1500mm, max. turning diameter: 660mm, swing diameter over bed: 660mm, speed main spindle/counter spindle: 5000rpm, tool stations: 40+9, coolant pressure: 70bar. Machine dimensions X/Y/Z: approx. 5200mm/2550mm/2600mm, weight: approx. 14000kg, spindle hours: 24679h. Including high-pressure coolant, SMW steady rest, SMW chuck, steady rest integration, Renishaw probe, measuring probe, CAD/CAM software Topsolid 7.18, oil skimmer, postprocessor and Inspection-Plus package. The machine was mainly used for finishing. Documentation available. An on-site inspection is possible. Gedpfx Ajx Ih Dgobrjtu

Year of construction: 2020, condition: ready for operation (used), X1-/ X3-axis: 180mm, X2-axis: 180mm, Y1-/ Y3-axis: ±45mm, Z1-/ Z3-axis: 704mm, Z2-axis: 620mm, E2-axis: 720mm, rapid traverse X, Y, Z-axis: 30m/min, spindle 1: max. speed: 5000/min, spindle bore: 65mm, chuck diameter: 210mm, spindle 2: max. speed: 7000/min, spindle bore: 42mm, max. chuck diameter: 140mm, spindle nose diameter: 110mm, max. chuck jaw weight: 1.25kg, number of stations: 2x12, number of driven tool stations: 2x12, max. speed: 8000/min, power S3 25%: 4.3kW, torque S3 25%: 13.6Nm. Length: 2880mm, width: 2130mm, height: 1990mm, weight: 7.5t, operating hours: 16,597.7h. Including bar feeder Top Automazioni X-FILES S, year of manufacture 2020, 4x tool holders, straight, left-right square mount, external coolant, 4x machine interface: BT45A, 1x milling head 90°/BMT 45 Spinner, angled milling head/ BMT45/ ESX-25 right and left twin-spindle, Spinner flat coupling, ER25 max. speed: 6000/min, i=1:1, raised design with center distance 85mm, 1x cut-off holder, rotation direction universal, external coolant. Regularly maintained, maintenance records available, an on-site inspection is possible. Gsdpfxsw Sxx Uj Abrstu

Year of construction: 2009, condition: ready for operation (used), A CNC universal turning and milling machine DMG Mori is available. Travel X/Z: 160mm/450mm, turning diameter over bed/face slide: 330mm/260mm, distance between centers: 450mm, chuck diameter: 210mm, speed: 5000rpm, spindle power: 16.5kW/11kW, tool positions: 12, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 3200mm/2000mm/1800mm, weight: approx. 3500kg, operating hours: 18127h. Dokumentation vorhanden. On-site inspection is possible. Gjdoygmcqepfx Abrstu

Condition: ready for operation (used), Year of construction: 2008, operating hours: 56,089 h, Swing diameter over bed/cross slide: 820mm/550mm, distance between centers: 2666mm, max. turning diameter: 610mm, max. workpiece length: 2500mm, travel X/Z: 410mm/2560mm, travel Y: -80mm/100mm, max. workpiece weight without/with tailstock: 500kg/1500kg, tool positions: 12, rapid traverse X/Z/Y: 24m/30m/12m/min, feed force X/Z/Y: 17kN/20kN/17kN. Machine dimensions X/Y/Z: approx. 5500mm/2250mm/2550mm, weight: approx. 15000kg, operating hours: approx. 56089. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026. Gjdpfx Ajw Dfhuebrotu

Year of construction: 2012, condition: ready for operation (used), Travel X/Y/Z: 2000mm/750mm/800mm, NC rotary table diameter: 950mm, milling head: SK50, milling head tilt: +/-90°, tool positions: 48, max. workpiece weight: 2500kg. Dimensions X/Y/Z: approx. 4000mm/3100mm/3200mm, weight: approx. 16000kg, control: Heidenhain 640. Including measuring probe M & H, 40bar IKZ, work area extraction Reven, paper belt filter Resy, brine conveyor, chip cleaning gun, wedge chuck Schink, diameter: 630mm, with various clamping jaws and other various turning and milling tools. Documentation available. On-site inspection is possible. Gtsdot Ambwspfx Abrou