Used Mitre Saw for sale (8,531)

Condition: used, Year of construction: 1991, saw blade diameter 275 mm cutting diameter 90 mm cutting speed 80 m/min EISELE Miter Circular Saw VMS 120 Blodpfxex Avtvo Amrjk Saw blade diameter: 275 mm Cutting capacity at 90° (round): 90 mm Cutting capacity at 90° (rectangular): 75 × 75 mm Cutting capacity at 45° miter (rectangular): 75 × 75 mm Saw blade speed: 40 / 80 rpm Drive motor: 380 V, 1 / 1.2 kW Required floor space: 700 × 600 × 1580 mm Weight: approx. 180 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4150x1200x1650 mm Bjdpfx Amovz Ezwsrolk Weight 450 kg Total power requirement 1,5 kw

Condition: used, Mitre circular saw BERG & SCHMID type MKS 350 Year of construction approx. 1980 Sawing range at 90° round Ø 110 mm Sawing range for 90° rectangle 160 x 90 mm Sawing range for 90° square 95 x 95 mm Sawing area at 45° round Ø 95 mm Sawing area for 45° rectangle 120 x 90 mm Sawing area at 45° square 80 x 80 mm Saw blade diameter max. 350 mm Saw blade speed 28 and 56 rpm Motor power approx. 1.8 / 2.5 kW pole-changing Mains connection 380 Volt, 50 Hz - Motor with 2 electrically switchable speeds - Infinitely variable mitre quick adjustment up to 45° - Material vice with quick-release eccentric lever Bjdpfx Aequzd Rjmrslk - Coolant device with electric coolant pump - material stop 350 mm - Saw blade with Ø 335 mm installed Space requirement L x W x H 1250 x 600 x 1200 mm Weight 240 kg good condition

Condition: used, Miter chop saw for aluminum (special machine construction with 4 servomotors) Circular saw, miter saw, crosscut saw Year of construction: 2002 Bjdpfx Amsdzp T Derelk Saw blade diameter: 500 mm Cutting range at 90°: Round Ø 180 Rectangle 350 x 140 mm (through crosscut) Cutting range at 45°: Round Ø 180 Rectangle 350 x 100 mm (through crosscut) Base carriage guide length: 1100 mm Travel on the base carriage (forward/backward): 650 mm Travel on the stand (up/down): 120 mm Saw blade speed: approx. 3000 rpm Motor power: 2.2 kW Power connection: 400 volts, 50 Hz - Controlled crosscut movement - Controlled saw blade height adjustment - Controlled miter cut through pivoting saw head - Controlled miter cut through tilting saw head - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gearbox (Motor MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN) - Axis movement perpendicular via INDRAMAT servomotors and ball screw spindles (Motor MKDO41B-144-KP1-KN) - A total of 4 Indramat servomotors are installed - Very good German machine engineering Space requirement: L x W x H 1150 x 1100 x 1400 mm Weight: approx. 360 kg Good condition This unit comes from a special machine for specific products. All other components and electrical parts for the construction of a new special machine are also available.

Condition: used, CNC multi-blade saw for non-ferrous metals, MIKSITZ Year of manufacture: 1991 Circular saw, aluminum circular saw, table saw, miter saw For cutting and notching aluminum profiles Blade stroke: 500 mm Maximum cutting height: 100 mm Blade speed: approx. 5000 rpm Installed blade diameter: 300 mm Maximum blade diameter: 400 mm Motor power: 5.5 kW Power supply: 400 volts, 50 Hz Table size: 1100 x 1100 mm Table cutout: 300 x 1100 mm Working height: approx. 1100 mm Tool holder: SK40 - Multiple saw blades can be mounted on a working shaft with bearings on both sides - A long milling arbor SK40 serves as the working shaft - Belt drive between the drive motor and the saw shaft - Table height adjustable via crank (for cutting depth) Bodpsdzp Snsfx Amrelk - Fixtures and stops can be mounted on the table - Blade stroke via ball screw with servomotor - Single-axis CNC control for the cutting movement, LENORD + BAUER, type GEL 7541.0000 - Adjacent control cabinet Space requirement: L x W x H 1800 x 1600 x 1700 mm Weight: approx. 1100 kg

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 014105, saw blade diameter: 250 mm, overall weight: 250 kg, rotational speed (max.): 5,000 rpm, inner diameter: 30 mm, No minimum price – guaranteed sale to the highest bidder! Loading can take place on 08/09/2025 or 09/09/2025! Blsdpfxsw Hrzmj Amrek TECHNICAL DETAILS Rated speed: 5,000 rpm Saw blade diameter: 250 mm Fence: up to 6,300 mm Max. cutting depth: 90 mm Inner diameter: 30 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,400 x 900 x 1,600 mm Weight: 250 kg EQUIPMENT With roller conveyor assembly kit Note: The saw does not have a continuous roller conveyor; the last roller supports the profile at the end of the fence.

Condition: used, Year of construction: 2003, used, good condition Machine cleaned, lubricated, partially overhauled. Various wear parts replaced. Test run with settings. Manufacturer: Rapid Model: DGS 200 Year of manufacture: 2003 Machine no.: 404 CE type-tested Motors: 2 x 2.2 kW Cutting width: 4000 mm Cutting depth: 130 x 140 - 100 x 230 - 60 x 270 mm Bledpfx Amoyclxperek Cutting height max.: 280 x 50 mm Max. blade diameter: 420 mm Manual tilt: 45° Linear feed: pneumatic Digital displays for cutting length 4x pneumatic workpiece clamping - 2x horizontal, 2x vertical Cylinders: 2 horizontal, 2 vertical Space requirement approx. 5100 mm x 1180 mm x 1280 mm Weight approx. 800 kg Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee.

Condition: used, functionality: fully functional, Crosscut Saw, Mitre Saw OMS FC 350 R 2.2 kW – after technical inspection Specification: • Technical condition: used, after inspection • Manufacturer: OMS • Model: FC 350 R • Blade diameter: 350 mm • Saw motor: 2.2 kW • Maximum dimensions of workpiece cut at right angle: 110 x 150 mm (height x width) • Blade guard for operator safety • Extraction port diameter: 60 mm • Cutting angle adjustment: +/- 45 degrees (machine does not maintain perfect extreme angles) • Overall dimensions without tables: 82 x 80 x 76 cm (length x width x height) Additional information: • The machine is in decent technical condition, ready for immediate use • The presented photos show the actual condition of the item for sale • Possibility to power up and test the device on site • The price listed in the auction does not include VAT or transport costs Bledpfxoy Rh D Ej Amrsk Financing and Transport: • We organise transport with the MDD fleet, courier companies, or external carriers • Financial support available in the form of leasing or lease loan

Condition: used, functionality: fully functional, OMGA TR2A Double Mitre Saw for Wood and Aluminium – after technical inspection, ready for operation Specification: • Technical condition: used, after comprehensive maintenance • Manufacturer: OMGA • Model: TR2A • Main motors: 2 x 1.65 kW (3,000 rpm) Bedpey Rh Drofx Amrelk • Pneumatic head control • Max. cutting length: 312 cm • Min. cutting length: 10 cm • Max. cross-section at 90°: 80x145 mm • Max. blade diameter: 300 mm • Mitre cutting range: -45° to +45° (right, left) • 3 working modes • Vertical workpiece clamps • Extraction ports: 80 mm diameter • Weight: approx. 500 kg • Overall dimensions: 436 x 115 x 125 cm (L x W x H) Additional information: • The machine is in good technical condition, ready for immediate use • The photos provided show the actual condition of the item for sale • Inspection and functional testing possible on-site • The listed price excludes VAT and transport costs Financing and transport: • Transport can be arranged via our own MDD fleet, couriers, or external carriers • Financing support available in the form of leasing or lease loans

Condition: used, Year of construction: 1999, power: 3 kW (4.08 HP), input voltage: 400 V, cutting height (max.): 200 mm, saw blade diameter: 520 mm, overall weight: 350 kg, cutting length (max.): 420 mm, mount diameter: 50 mm, saw drive: 3,000 W, No. 04511 Crosscut and mitre saw Graule ZS 200 N Used, year of construction 1999 Saw can be swiveled and tilted 3 kW three-phase brake motor 400 V Saw blade diameter 520 mm Saw blade holder 50 mm Cutting height 200 mm Saw blade tilted to 45°: Cutting height 140 mm Cutting length 420 mm Table dimensions 900 x 700 mm LW Aluminium fence back With machine stand and hand crank at the rear for tilt adjustment Hydraulic feed brake Pneumatic material clamping on both sides from above Saw blade spray device for coolant or lubricant Carbide circular saw blade for aluminium and plastics, diameter 520 mm Roller conveyor type RLK 4000 mm, with fold-away material fence and scale Roller conveyor 4000 mm long after the saw Roller conveyor width 350 mm Transport dimensions machine approx. 1650 x 1200 x 1850 mm LWH, roller conveyors approx. 4500 x 400 x 1950 mm LWH Weight approx. 350 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Blsdpfsyh Nfuox Amrek Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: new, 0 3.700mm, 5.100mm, 6.100mm mm Bedexmk Aaopfx Amrolk Working height 160 mm 0 ja

Condition: new, 0 3.700mm, 5.100mm, 6.100mm mm Working height 160 mm Bjdpfx Aoxmk Agjmrolk 0 ja Control ja

Year of construction: 2008, condition: excellent (used), functionality: fully functional, Electronic X-axis control X-axis positioning speed (m/min) 25 Bledpfxoyv Ag Sj Amrok Pneumatic head tilting External tilting 45° / 22° Mechanical adjustment of intermediate angles Hydropneumatic blade feed Usable cutting length (mm) 5,000 Minimum standard cut with 2 heads at 90° (mm) 310 Blade diameter (mm) 450 Contact probe

Year of construction: 2007, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1340020469, Mitre Saw Machine AKS 134/00 1 x Saw Blade Ø550mm Blodox A D Ihspfx Amrjk 1 x Saw Blade Ø500mm Equipped with digital angle setting readout

Year of construction: 2005, condition: good (used), I sell the double mitre saw OMGA TRF 527, year 2005. Cutting length 390 - 2800mm Cutting width max. 170mm Cutting height max. 90mm Bsdpfx Asg Tumcsmrolk Tilting heads 0 + - 45° 2 Horizontal + 2 Vertical pneumatic Material pressures 2 Motors x 1,62kW (2,2 HP) Good condition. Available immediately.

Condition: good (used), Year of construction: 1997, I sell the double mitre saw OMGA TI2500 Super. Cutting length 230 - 2500mm Cutting width max. 1500mm Bljdpfoxtxh Djx Amrjk Cutting height max. 115mm Saw cutting aggregate main blade + scoring blade each side. Fully tilting - 45 up to + 45 ° 2 Motors x 4,0kW (5,5 HP) Good condition. Available immediately.

Condition: new, saw-blade dia. 210 mm Cutting height 70 x 305 mm Cutting height at 45° 35 x 305 mm saw blade turning speeds 4500 U/min Motor output 1,5 kW machine weight ab. 9 kg Dimensions (L/W/H) 340 x 500 x 740 mm Cross-cut saw The machine is equipped with many adjustment options and tools to support and Bodpeu Imniofx Amrelk secure the workpiece to be cut. A line laser indicates where the cut should be made. The protective cover folds away automatically. Delivery including: saw blade (installed) 6mm allen key anthers 2x side supports

Condition: new, saw-blade dia. 305 mm Cutting height 105 x 340 mm Cutting height at 45° 60 x 340 mm saw blade turning speeds 5000 U/min Motor output 2,0 kW Bledpsu Immrefx Amrek machine weight ab. 25 kg Dimensions (L/W/H) 700 x 570 x 980 mm Cross-cut saw The machine is equipped with many adjustment options and tools to support and secure the workpiece to be cut. A line laser indicates where the cut should be made. The protective cover folds away automatically. Delivery including: saw blade (installed) 6mm allen key anthers 2x side supports

Condition: good (used), Year of construction: 1997, Double miter saw RAPID DGS 200 Year of manufacture 1997 Drive: 2 x 2.2 kW, 400 V Swiveling range, manual: 45° to 90° Saw blade: 420 mm Ø Saw feed: pneumatic Cutting length: 4000 mm Profile clamping: 2 horizontal clamping cylinders 2 vertical clamping cylinders Length adjustment: manual Length display: digital Air pressure: 7 bar Profile support: fixed on the outside, movable in the center Dimensions (L/W/H): 5200/1200/1500 mm Bljdpehctt Ejfx Amrek Weight: 800 kg

Condition: good (used), Double mitre saw Manufacturer: Haffner Model: DGS 180 Year of manufacture: N.A., approx. 1990 Bjdjx Hgu Ijpfx Amrolk Cutting length: 3,400 mm Saw blade diameter: 330 mm Power: 2 x 1.1 kW Speed: 2,800 rpm Tilting: 45°, 90° Swivelling: -45°, 90°, +45°

Condition: new, Miter saw with a saw blade diameter ranging from 400mm to 800mm - Manual miter angle adjustment - Pneumatic table clamping Bodpfx Amjd Rhzierjlk - Pneumatic workpiece clamping (height and inclination angle of the clamping cylinders can be adjusted continuously) - Two-hand safety control Available as optional extras: - Automatic miter angle adjustment - Hydraulic saw feed - Hydraulic clamping device - Roller conveyor with length stop or positioning system - Design as a saw automation system - Pre-loading magazine - Horizontal clamping device - Dust extraction system - Other accessories available on request We would be pleased to provide you with a customized offer based on your requirements. The machine can be inspected and tested at our location in 56812.

Condition: good (used), Year of construction: 1998, Cutting length 6000 mm Saw blade diameter 500 mm Bodpfx Ameyz Il Rorjlk Mitre cuts swivelled from 22.5° outward to 45° inward Two-hand operation with intermittent spray device

Condition: excellent (used), functionality: fully functional, Electronic control of X-axis X-axis positioning speed (m/min) 25 Pneumatic tilting heads External tilt 45° Mechanical adjustment of intermediate angles Hydro-pneumatic blade feed Usable cutting length (mm) 4,000 Minimum standard cut with 2 heads at 90° (mm) 310 Bedpjyn Adysfx Amrolk Blade diameter (mm) 500 Feelers / copy sensor

Condition: new, • Profile width max. (mm): 90 • Profile height max. (mm): 80 • Saw blade diameter (mm): 350 • Saw blade bore (mm): 30 • Motors: 2 x 1.5 kW • Dust extraction connections: 2 x Ø 80 mm • Pressure (bar): 6 – 7 • Weight (kg): 300 • Cutting of profiles: for wood, plastic, and aluminum frames • Saw blades: 2 fixed at 45° Blsdpfx Ajfiqhbjmrek • Pneumatic unit stroke: with two-hand operation • Adjustable stroke speed • Pneumatic slat clamping devices: within the machine cycle • Automatic slat adjustment: to profile shape • Diagram plates (mm): 700 mm long, right and left • Pneumatic length stop • Motor protection switch • Motor brakes • Tool set • Maintenance unit • Pressure monitor Machine features: • Easy to operate • Fast cycle time • Low maintenance and cleaning requirements

Year of construction: 2024, condition: used, cutting width 180 mm Cutting height Ø140 mm Motor output 2,2 kW Cutting height at 45° Ø120 mm Dimensions (L/W/H) 700x950x1750 mm Blodpfx Asvnwfusmrok machine weight ab. 180 kg