Mitre saw

WINTER ASKS-6060

Condition: excellent (used), Swing over bed 1000 mm Distance between centers 2000 mm Center height 500 mm Dodpewhkdcofx Ah Ujwd Swing over slide 700 mm Spindle bore 128 mm Spindle speeds 6.4-1'600 rpm SIEMENS 810 D control Misc. accessories MARCELS MASCHINEN CH

Year of construction: 2013, condition: ready for operation (used), Turning length: 6000mm, orbital diameter over bed/support: 820mm/515mm, spindle bore: 128mm, speed: 1600rpm, spindle power: 46kW, center height: 400mm, bed width: 560mm, quill diameter: 125mm, quill stroke: 280mm, connected load: 62kW. Machine dimensions X/Y/Z: approx. 6500mm/2500mm/2300mm, control: Heidenhain, operating hours: approx. 9000h. Including accessories such as a steady rest. Documentation available. On-site inspection is possible. Dwsdpfx Ahjvwcwuj Ued

Condition: excellent (used), Year of construction: 2010, Control: Siemens Sinumerik 840D Work Area Swing diameter over bed: 820 mm Swing diameter over cross slide: 520 mm Cross slide travel: 600 mm Tool Holder: Front: Capto size C6 – Multifix D1 Rear: Boring block with clamping claw Centre Distance: 3,000 mm Main Spindle Drive Power digital AC motor – 60% duty cycle: 46 kW Number of gear stages: 2 (ZF planetary gearbox, electrically shifted, mounted outside the headstock) Headstock Spindle nose DIN 55027 / Bore (standard): 11 / Ø 132 mm Spindle diameter in front bearing: 190 mm Speed range (constant V): 1 – 1800 rpm Standard chuck sizes: Ø 315, Ø 400, Ø 500 mm Spindle nose DIN 55026 / Bore (option): A 11 / Ø 164 mm Spindle diameter in front bearing: 210 mm Speed range (constant V): 1–1600 rpm Cross Slide Transverse feed range: 0.001 – 1000 mm/min Longitudinal feed range: 0.001 – 2000 mm/min Thread pitches: 0.01–999.999 mm Rapid traverse transverse/longitudinal: 5/10 m/min At centre distance: 4,000 mm Transverse feed force: 16,000 N Longitudinal feed force: 22,000 N Turning tool section: 40 x 40 mm² Tailstock Quill diameter: 125 mm Quill travel: 280 mm Taper: 6 Mk Electrical Equipment Three-phase: 400 V, 50 Hz Design in accordance with VDE and EMC guidelines EN50081-2 / EN 50082-2 Interference suppression level A according to EN 50081-2 Dwjdpfx Ahsxgdfbe Uod For TN-S or TN-C networks / industrial networks without RCD protection Dimensions Machine (L × W × H) = 2.88 m + centre distance × 2.55 m × 2.32 m Machine Weight (Centre distance / weight approx. kg) 3000 mm: 10,900 kg

Condition: refurbished (used), Year of construction: 2024, Overhauled: 2024 Control: SPS Siemens S7 Saw blade max: 500 mm motor power 4,0 KW Saw blade feed: 0-40 mm/ s continuously adjustable Saw height control electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 190 x 130 mm Working range round 90° max.: 170 mm The machine has been completely overhauled in our company and is in mint condition. Among other things, the following points were renewed: Conversion to Siemens S7 PLC control Conversion to Siemens HMI user interface Conversion to pusher with servo control New electrical components New pneumatic lines New pneumatic components Conversion to valve terminal Optimization of the suction capacity New minimum lubrication system Replacement of general wear parts Overhaul of the cab The machine also has Minimum quantity lubrication Splitting extension (for a high-quality cutting surface without return marks) Pre-loading magazine for gentle handling of painted/anodized surfaces Offcut ejector in the pusher Djdouiy Ngjpfx Ah Uowd Foldable offcut tray Optional: Magazine width 3000mm Pusher length 6000mm Pusher length 8000mm Reinforced motor 5.5 kW Mass clamping device for parallel sawing of several workpieces Online support connection Delivery and installation on your premises Training of your employees

Condition: used, Year of construction: 2002, turning diameter 820 mm turning length 2.000 mm control SIN 810 D center height over square guideway 400 mm turning diameter over slide rest 500 mm x-travel 540 mm z-travel 2.100 mm feed x/z-axis 0,01 - 50 mm/min rapid traverse X-axis 5,00 m/min rapid traverse Z-axis 10,00 m/min feeding force facing 12.500 N power feed longitudinal 20.000 N spindle turning speed range 6,4 - 1.600 U/min spindle turning speed - gearbox stage 1 6,40 - 376 1/min. spindle turning speed - gearbox stage 2 27,40 - 1.600 1/min. Dwodew Dvipepfx Ah Uod power capacity at 60% / 100 % load 46,00 / 37,00 KW max. torque at 60% / 100% load 5.073 / 4.069 Nm constant cutting rate 1 - 9.999 m/min. spindle head DIN 55027 - Size 11 spindle diameter in front bearing 170 mm spindle bore 128 mm tailstock quill taper MT 6 diameter of quill 125 mm quill stroke 280 mm thread pitch 0,1 - 400 mm total power requirement 35,00 kW weight of the machine ca. 11,00 t dimensions of the machine ca. 6,00 x 3,00 x H2,60 m SIEMENS Sinumerik 810D mcontrol, chip-conveyor, tail stock, dust exhauster, 2 pc. steady rest. Machine can be inspected under power.

Condition: like new (used), Year of construction: 2024, Overhauled: 2024 Year of manufacture: 1994-2000 Saw blade 560 mm Motor power 6,5 / 8,0 KW Speed 1500/3000 min-1 Cutting speed 2100 - 4200 m/min Saw height control: electronic Working range square max.: 170x170 mm Working range flat max.: 300x150 mm Working range round max.: 200 mm Saw feed 0 - 40 mm/s infinitely adjustable Cutting length 5-950 mm (9999 mm multiple stroke) Feed speed max. 500 mm/s Weight approx. 1900 kg Dimensions LxWxH 2200mm x2700mm x1950mm The machine is in mint condition, both technically and visually, following a completed retrofit. Due to its equipment and design, the machine can be used very efficiently for a wide range of applications. The programmed HMI control system ensures simple and very profitable operation of the machine. The soundproof cabin reduces noise emissions to a minimum. The machine is generally overhauled in our company at the customer's request. Among other things the following points will be renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI user interface - Replacement of the ball screw - Replacement of servo motor and servo inverter - New electrical components - New pneumatic lines - New pneumatic components - Overhaul or replacement of all pneumatic cylinders - Renewal of the valve terminal - Optimization of extraction performance - Overhaul of minimum lubrication system Dwodpfsuiy Hrex Ah Uod - Replacement of general wear parts - Overhaul of the cab The machine also has: - Soundproof cabin - Splitting extension (for a high-quality cutting surface without return marks) - Height control fully electronic Warranty: Unless otherwise agreed, we provide a 6-month guarantee on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the guarantee. Optional: - Mass clamping device for parallel sawing of several workpieces - Flat magazine for automatic feeding of up to 6 m long primary materials - Roller conveyors for primary material - Reinforced motor 18.0 KW (frequency-controlled) - Delivery and installation on your premises - Training of your employees

Condition: like new (used), Year of construction: 2021, operating hours: 1,200 h, functionality: fully functional, turning diameter: 1,100 mm, power: 46 kW (62.54 HP), distance between centers: 2,000 mm, load hours: 1,200 h, A DMT CD1100 lathe with Heidenhain control and only 1200 operating hours is available. The working area includes a swing diameter of approx. 1100 mm over bed and approx. 800 mm over cross-slide. The tool holder is a Multifix D1. The distance between centers is 2000 mm. The main spindle drive is a motor with 46 kW power at 60% duty cycle and features a two-speed gearbox. Tailstock: - Quill diameter: 125 mm - Taper: 6 Mk Dwjdpsxlza Hofx Ah Ued Electrical equipment: - Three-phase current: 400 V, 50 Hz - VDE and EMC directives EN50081-2 / EN50082-2 Delivery: Collection by the buyer Payment: 100% prepayment by bank transfer immediately upon invoicing All details are subject to change and prior sale is reserved. The machine is sold without any warranty claims and remains our property until full payment has been received.

Condition: refurbished (used), Year of construction: 2024, Overhaul year: 2024 Saw blade VHM / HSS: 315 - 360 mm Drive power saw motor: 15 KW Infinitely variable speed: 15 - 130 min-1 Saw blade cutting speed (350 mm): 16.4 - 142.8 m/min Saw height control infinitely variable: electronic Working range square 90° max.: 100 x 100 mm Working range round 90° max.: 110 mm Feed length 5-970 mm (9999 mm multiple stroke) Feed speed AC servo max.: 300 mm/s Compressed air connection on site: 6 bar Saw weight approx.: 1800 kg Dimensions LxWxH: 1900mm x 1250mm x 2100mm Footprint LxW: 1900mm x 1250mm Thanks to its equipment and design, the machine can be used very efficiently for a wide range of applications. The HMI interface for controlling the machine ensures simple and problem-free operation of the system. Following a completed retrofit, the machine is in mint condition, both technically and visually. A viewing of this sawing system is possible at any time. The machine will be completely overhauled in our company at the customer's request. Among other things, the following points will be renewed: - Conversion to PLC control Siemens S7 - Renewal of the ball screw drive with servo control - New electrical components - Renewal of the pneumatic lines - New pneumatic components - Overhaul or renewal of the hydraulic lines - Overhaul or renewal of the hydraulic components - Overhaul of the cab - Overhaul of the motors - Replacement of all bearings - Replacement of general wear parts The machine also has - Reinforced motor 15 KW - Soundproof cabin - Splitting extension (for a high-quality cut surface without return marks) - Frequency control motor - Minimum quantity lubrication - Automatic central lubrication system - Pneumatic chip space cleaning on the saw blade Dodpfx Ajuizinoh Uowd Warranty: Unless otherwise agreed, we provide a 6-month guarantee on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Mass clamping device for parallel sawing of several workpieces - Roller conveyor 4m/ 6m - Special roller conveyor 4m/ 6m for bundle clamping - Flat magazine for automatic feeding of up to 6m long primary materials - Online support connection - Delivery and installation on your premises - Training of your employees

Condition: used, Year of construction: 1999, functionality: fully functional, Equipment: documentation/manual, For sale is a robust and precise cycle lathe WEILER E90 x 4500, year of manufacture 1999, featuring a large swing diameter and cycle control – ideal for heavy workpieces up to 6000 kg. The machine is in technically good condition and was most recently used in industrial production. It is perfectly suited for single-part and small-batch manufacturing of large components. The machine is equipped with cycle control, a steady rest, and a tailstock with large quill travel. Dwsdpjw Idx Sjfx Ah Ued

Year of construction: 1995, condition: ready for operation (used), A Boehringer cycle-controlled CNC lathe is available. Turning diameter over bed/face slide: 820mm/520mm, turning length: 1000mm, spindle bore: 128mm, quill diameter: 125mm, quill stroke: 280mm, max. workpiece weight: 5000kg. Machine dimensions X/Y/Z: approx. 3700mm/2400mm/2500mm, weight: approx. 6500kg, operating hours: 39814h. On-site inspection is possible. Dodpowu E Ddsfx Ah Uewd