Used Monitoring for sale (4,997)

Condition: excellent (used), Here we offer a Weiss climate test chamber. Kodpfezd Ultex Anyolu Designation: SB2/500/80, water-cooled Cold-heat operation: -75°C ... +180°C Climate operation: +10...+95°C Humidity range: 10...98 % RH Temperature stability, over time: ± 0.2K Humidity stability: ±1 % RH Temperature change rate: Cooling: approx. 1.4 K/min Heating: approx. 2.5 K/min External dimensions: Height 1980 mm, Width 1265 mm, Depth 1365 mm Connections: left side: ∅ 100 mm right side: ∅ 50 mm The connection voltage is: 400V/3Ph+N+PE/50 Hz Power: 10.4 kVA Weight: approx. 720 kg Refrigerant: R404a / R23 For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Type: SB2/500/80 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: new, IPETRONIK Interior Simulation Box Here we offer an IPETRONIK interior simulation box. Technical data and description of the system: IPETRONIK Interior Simulation Box (new and unused) The interior simulation box is designed to simulate the passenger compartment for tests in recirculation mode. It has a variable interior volume of 1.8 to 4 m³. The exhaust air volume flow from the front evaporator or the air conditioning unit is regulated and directed into the interior. Only rear evaporators installed in the passenger compartment are tested with the interior simulation box. The insulated housing is mounted on an aluminum profile frame with rollers. A light is installed in the chamber. The box is protected against overheating via a safety thermostat (ESTI). If the permissible temperature is exceeded, a glass cartridge in the ESTI is destroyed. The system is stopped. (TRIGGER TEMPERATURE: 80°C) Technical data of the insulated chamber: Dimensions: External: Width 1,860 mm, Depth 2,360 mm, Height 1,360 mm Internal: Width 1,700 mm, Depth 2,200 mm, Height 1,200 mm Insulation: 80 mm rigid polyurethane foam, CFC-free, U-value 0.27 W/m2K, building material class B1 according to DIN 4102 Technical data and description of the system: Connection: Tongue-and-groove system with foam-injected eccentric locking latches. Surfaces: Both sides: 0.8 mm stainless steel sheet 1.4301, polished, grit 320 Floor design: 2.0 mm stainless steel sheet 1.4301, SM rhombus pattern, non-slip, Ksdpfx Ajzd Ukpenyjlu Floor with a 90° upturned edge around the perimeter (approx. 15 mm), floor sheet flush with wall sheet, Pressure distribution plate made of laminated wood, can withstand a load of 1,500 N / rubber wheel (contact area > 4 cm2), 30,000 N/m2 surface load, floor joints completely welded, welded stainless steel pipe as a floor drain, led downwards through the floor Chamber door: Hatch door, 1-leaf, 800 x 1200 mm i.L., DIN left, heated door frame (230 V), Heating tapes are silicone-free, 4-sided sealing profile made of EPDM, Latch closure, lockable, emergency release, Heated viewing window, 500 x 500 mm, triple-glazed, Surface heating (230 V), frame heating (230 V), heating controlled by the customer, Silicone-free edge trim Sliding wall: 1680 x 1180 mm, 80 mm rigid polyurethane foam, 0.8 mm stainless steel sheet 1.4301 on both sides, polished, grit 320, with protective film, closed on the other side with sheet metal (The rear wall is manually adjustable in stepless increments to change the volume) Recirculation system: A heat exchanger (Systemair) for indirect temperature control is installed in the recirculation circuit for temperature control. The air is circulated by a radial duct fan (Cosmo), and heating is provided by an electric heater (Türk and Hillinger) integrated into the brine circuit. The heaters are continuously monitored by means of temperature monitors and limiters (Türk and Hillinger, Johnsson Controls). Cooling is carried out via a secondary brine circuit with pumps (KSB) and a 3-way valve (Belimo). Installed electrical heating power 1 * 6kW. The mixing ratio is 50% water / 50% ethylene glycol. Power supply from station: =TME2++AS-QF21 Operating voltage: 400V Power: 17kW Rated current: 33A Fuse: 35A Control voltage: 24V DC / 24V AC / 230V AC PLC system: S7 300 Type: IPETRONIK Interior Simulation Box Condition: used Scope of supply: (See picture) (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions

Condition: excellent (used), Type: Jeol JSM-6490 Jeol JSM-6490 Scanning Electron Microscope (PC-SEM) Modern, high-resolution, digital scanning electron microscope featuring newly developed electron optics and an intuitive, graphical user interface (GUI) running on Microsoft Windows XP Professional. Instrument configuration includes the following features: • Magnification range: 5x – 300,000x • Acceleration voltage: 0.3 – 30 kV • Tungsten filament cathode (LaB6 cathode optional) • Large fully motorized sample stage with eccentric tilt capability, including: – Graphic navigation on the sample holder – Easy sample navigation via click-center-zoom – Field-of-view controlled navigation via two navigators – Relative coordinate navigation – Save and recall of sample positions – Adjustable stage field-of-view selection • Field-of-view correction during rotation via computer-driven eccentric rotation • Field-of-view correction during tilting via computer-driven eccentric tilting • Calculation of the possible tilt angle based on sample geometry • Automatic focus tracking when moving the sample in the Z-axis • Intelligent limit switches for all motorized axes • Stage travel: X = 125 mm Y = 100 mm Z = 5 to 80 mm (stepless) T = -10°C to +90°C R = 360° (continuous) • Secondary electron detector for high vacuum operation • Newly designed, super-conical objective lens for optimal resolution at high tilt angles • Guaranteed SE image resolution: 3 nm at 30 kV and 15 nm at 1 kV • Simultaneous live imaging with multiple detectors • Powerful image measurement functions • Movie function for recording dynamic processes • Versatile specimen chamber with numerous expansion options: free ports for EDX, WDX, EBSD, cathodoluminescence, etc. • Low-maintenance, quiet pump system consisting of a fore vacuum pump, vibration-free high-performance diffusion pump, and electromagnetic valve control • Comprehensive safety procedures against misuse and external media failure • Ergonomic, height-adjustable system table • SEM starter kit including 2 sample holders, tool kit, and 6 replacement filaments Additional equipment for SEM: • Turbomolecular pump (instead of standard diffusion pump) – Use of a turbomolecular pump eliminates the need for cooling water during SEM operation. Further SEM equipment: • PC for SEM control including TFT monitor • ΟΧ200 Bruker Quantax 200 Extended EDX System – Bruker EDX software will be transferred to new owner upon purchase • Nitrogen-free, energy-dispersive X-ray analysis system including: – SDD detector with 127 eV energy resolution or better – Detection for all elements from boron upwards – Vibration-free, maintenance-free. Peltier cooled (no nitrogen required) – Pulse processor – TFT monitor – Spectrum measurement and element identification – Fully automatic, quantitative, standardless elemental analysis – Image acquisition – Ultra-fast qualitative line scan – Ultra-fast qualitative element mapping – Data management and archiving system – Report generation and results output – Data communication – Installation and user training – HyperMap – Multipoint analysis Kljdpjzd Ufaofx Anyou – Bruker xFlash detector (SDD) with signal processing unit SVE III Scope of delivery: (see photos) Condition: used (Subject to changes and errors in the technical data and specifications!)

Year of construction: 2020, condition: like new (used), Here we offer a safety workbench. The Herasafe 2030i series of biological safety cabinets utilizes many years of experience Kljdpfezd Udvjx Anyju in the field of global leadership in BSC design, incorporating groundbreaking innovations to optimize the prevention of contamination, user-friendliness, and information management, and delivers the most technologically advanced Class II cabinets on the market. Equipped with "intelligent" safety features for self-monitoring, an intuitive graphical touchscreen user interface, and integrated connectivity for maintaining important performance data, the Herasafe 2030i impresses with its performance and unparalleled precision for demanding cell culture applications and other sensitive tasks that require a high level of safety for product, personnel, and the environment. Suitable for working with BSL 1, 2, and 3 pathogens, EN1822 standards, dual DC motors, DAVe Plus, SmartFlow Plus, and SmartClean Plus. Features an intuitive touchscreen interface, a working height of 20 cm, an electrically operated window, a segmented work surface in sections of 30 cm, and a 316L stainless steel interior. Certified by TÜV Nord according to EN12469. Includes an optional, manually adjustable base, 1.5 m including a Thermo cross-beam UV lamp. External dimensions (L x W x H): 800 x 1600 x 1536 mm Internal dimensions (L x W x H): 627 x 1500 x 780 mm 230 V 9 A 2010 W Type: Herasafe 2030i 1.5 Condition: used / like new (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Year of construction: 2020, condition: like new (used), Here we offer a safety workbench. The Herasafe 2030i series with biological safety cabinets utilizes many years of experience in the area of global leadership in BSC design, incorporating groundbreaking innovations to optimize the prevention of contamination, user-friendliness and information management, and provides the technologically most advanced Class II cabinets on the market. Kedpfx Aezd Udpsnyslu Equipped with "intelligent" safety functions for self-monitoring, an intuitive graphical touchscreen user interface and integrated connectivity to maintain important performance data, the Herasafe 2030i impresses with its performance and unparalleled precision for demanding cell culture applications and other sensitive work that requires a high level of safety for product, personnel and the environment. Suitable for working with BSL 1, 2 and 3 pathogens, EN1822 standards, dual DC motors, DAVe Plus, SmartFlow Plus and SmartClean Plus. Features an intuitive touchscreen interface, a working height of 20 cm, an electrically operated window, a segmented work surface in sections of 30 cm and a 316L stainless steel interior. Certified by TÜV Nord according to EN12469. Includes the option of a manually adjustable Thermo base, 1.5 m. External dimensions (L x W x H): 800 x 1600 x 1536 mm Internal dimensions (L x W x H): 627 x 1500 x 780 mm 230 V 9 A 2010 W Type: Herasafe 2030i 1.5 Condition: used / like new (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2012, machine/vehicle number: 0102-260014, The Behringer HBM 440 A high-performance band saw is a fully automatic straight-cut band saw designed for the economical, safe, and precise cutting of solid metal and comparable plastics. It is particularly well-suited for machining materials that are difficult to cut. The machine can be operated with both bimetal and carbide-tipped saw bands. As an optional feature, the HBM 440 A is equipped with a 11 kW saw motor. The machine offers a cutting range of up to 440 mm for round material and up to 440 x 440 mm for flat material. The saw band dimensions are 6,700 x 54 x 1.3 mm. The frequency-controlled saw blade drive, with a power output of 11 kW, enables a continuously variable cutting speed ranging from 15 to 150 m/min. Optional equipment for this system includes, among other things: Dynamic saw-in and saw-out functions Chip conveyor Kljdpfx Aozfx Stjnyju Central lubrication system Line laser Electrical monitoring of minimum speed LED panel light Spray gun for chip removal Heating for hydraulic oil, PC, and control cabinet Roller conveyor system on the infeed side Link belt conveyor on the outfeed side

Condition: excellent (used), 3D systems Type: DT60 Print volume: 600 x 450 x 450 mm External dimensions: 1265 x 780 x 1725 mm Precision in Z-axis: 1.25 microns Precision in X and Y-axis: 7.5 microns Max. extruder temperature: 500 °C Max. build chamber temperature: 120 °C Nozzle diameter: 0.6 mm Other available nozzle diameters: 0.2 / 0.4 / 0.8 / 1 / 1.2 mm Thermal barrier made of titanium Two independent extruders Heated filament feed 4 print modes: SINGLE, DUAL, TWIN, REFLEX 220 - 240 V, 50-60 Hz Maximum power consumption: 3 kW/h 7" LCD touchscreen Remote monitoring Industry 4.0 compatible: WiFi, Ethernet, HotSpot, USB MMS system - Modular Maintenance System Dual filament loading Automatic filament change Heated feeder Jam detection Sensor for detecting filament end Print recovery system Liquid cooling Klodozd Tugspfx Anyou Double-tempered glass Base fixed by vacuum High printing speed Positioning controlled via encoder Condition: used Scope of delivery: (See pictures) (Sale from location!) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Heraeus Vötsch Temperature Test Chamber Kedpfxjzd Sf De Anyelu Here we offer a Heraeus Vötsch temperature test chamber. Vötsch Temperature Test Chamber VTS 7033, Water-Cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.5 K Spatial temperature deviation: ± 1.5 K Heating rate: 7.5 K/min Cooling rate: 6.5 K/min Test chamber dimensions: Width 825 mm x Depth 800 mm x Height 870 mm Housing dimensions: 1080 mm x 1710 mm x 1950 mm Side openings: 12 cm and 13 cm Voltage: 400V +6/-10%, 3/N, 50Hz Rated power: 9.5 kW, Rated current: 22 A Refrigerant: R404A / R23 Approx. 570 liters, Weight: 580 kg For your safety as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Type: VTS 7033 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Here, we offer a shock test chamber. Water-cooled temperature shock test chamber Two-chamber design Warm chamber: Temperature control in the warm chamber ranges from +50°C to +220°C Temporal temperature deviation in the center of the usable space: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate: Heating: 11 K/min Cold chamber: Temperature control in the cold chamber ranges from -65°C to +70°C Temporal temperature deviation in the center of the usable space: ± 1 K Kljdpfx Aezd R Uwsnyou Spatial temperature deviation: ± 2 K Temperature change rate: Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range, warm chamber: +50°C to +220°C Temperature range, cold chamber: -65°C to +70°C Test chamber dimensions: Width 470mm, Depth 650mm, Height 410mm External dimensions: Width 930mm, Depth 2115mm, Height 1970+mm Rated power: 10 kW Rated current: 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant: R404A / R23 Operating hours: 27,903 hours Weight: 1000 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated instruments. Type: HT 7012 S2 Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We are happy to answer any further questions you may have by phone.

Condition: excellent (used), We offer a climate test chamber for sale. Air-cooled Test chamber nominal volume: 280 liters Dimensions: External dimensions of the test chamber: 1500 x 2040 x 1075 mm With fan motor and door removed: 1500 x 1940 x 925 mm Test chamber: 720 x 690 x 560 mm Door, clear opening: 720 x 690 mm Viewing window, heated: 500 x 600 mm Temperature range: +5 to +100 °C Heating rate: 4.0 K/min Cooling rate: 0.6 K/min Climate range: +10 to +95 °C Humidity range: 10 to 95 % RH Humidity change rate: ≤ ± 3.0 Water connection for humidifier: Tap water or distilled water, 20-liter reservoir Power connection: 400 V 3/N/PE, AC, 50 Hz Maximum power consumption: 6.3 kW Weight: 500 kg Type: 3416/16 Refrigerant: R134a For your peace of mind as a buyer, please note the following: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant Kledozd R T Tjpfx Anysu 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated instruments. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Here we offer you a Thermotron temperature chamber. Water-cooled Thermotron Temperature Chamber SE-1000-6-6 Internal dimensions (W x D x H): 1000 x 1000 x 980 mm Working chamber volume: approx. 980 liters Temperature range: -70ºC to 180ºC Overall heating rate: approx. 4.1 K Overall cooling rate: approx. 1.2 K Heating capacity (°C/min) -65º to 71ºC: 6.8°C Heating capacity (°C/min) -65º to 180ºC: 5.6°C Heating capacity (°C/min) -40ºC to 85ºC: 6.5°C Cooling capacity (°C/min) 85ºC to -40ºC: 4.7°C Cooling capacity (°C/min) 71ºC to -65ºC: 3.7°C Cooling capacity (°C/min) 180ºC to -65ºC: 4.3°C External dimensions (W x D x H): 1250 x 1900 x 2200 mm Electrical requirements: 400V / 5P / N / PE, 35 A Refrigerants: R508B and R404A Approximate weight: 900 kg Type: Thermotron SE-1000-6-6 Important information for you as a buyer: The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run monitored with calibrated devices. Condition: used Scope of delivery: (See picture) (Subject to change and errors in the technical data and information!) If you have any further questions, we will be happy to assist you by phone. Ksdozd R T Hjpfx Anyelu

Condition: excellent (used), Heraeus Vötsch Temperature Test Chamber Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch Temperature Test Chamber, Water-Cooled Klsdjzd R Tgspfx Anyeu Temperature range: -70°C to +180°C Temperature deviation (temporal): ±0.1 to ±0.5 K Temperature deviation (spatial): ±0.5 to ±2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10 kW, Rated current: 21 A Sound level at 1m distance (free-field measurement) < 69dB (A) Side feedthrough: 5.5 cm / 12.5 cm Chamber is water-cooled Refrigerant: R 452A and R 23 Weight: approx. 570 kg Type: VTS 7034-5 For your security as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: excellent (used), Thermotron Temperature Chamber Here we offer a Thermotron temperature chamber. Klsdjzd R S Nepfx Anyju Water-cooled Thermotron temperature chamber SE-1000-5-5 Dimensions of the working area - WxDxH: 102 x 100 x 97 centimeters Working area volume: 986 liters Temperature uniformity: ± 0.5°C Temperature range: -70ºC to 180ºC Temperature control tolerance: 0.3°C Installation dimensions - WxDxH: 122 x 188 x 218 centimeters Electrical requirements 400/3/50 32.4 A Refrigerant: R-404A / R23 Approximate weight: 862 kg Type: Thermotron SE-1000-5-5 For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: excellent (used), Weiss Temperature Test Chamber Here we offer you a Weiss temperature test chamber. Weiss Temperature Test Chamber, Water-Cooled Technical Data: Test chamber designation: WT1-600/70 External dimensions without hinges and door closure Height 1980 mm, Width 1085 mm, Depth 1655 mm Internal dimensions Height 950mm, Width 800mm, Depth 800mm Test chamber volume: approx. 600 liters Cold/heat operation: -70 to 180°C Temperature change per unit of time Cooling: approx. 2.5 K/min Heating: approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 9.1 kW Rated current: 19 A Permissible weight of test specimens Total load of the shelf supports: 80 kg Refrigerant: R 404A + R23 Weight: 600 kg Type: WT1-600/70 For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Kledpfjzd R Svox Anysu Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: excellent (used), Weiss Temperature Test Chamber Here we offer a temperature test chamber. Weiss Temperature Test Chamber, Water-Cooled Technical Data: Test chamber designation: WT-600/70 External dimensions with hinges and door lock: Kedszd R Dropfx Anyjlu Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock: Height 1995 mm, Width 1000 mm, Depth 1660 mm Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Test chamber volume: approx. 600 liters Cold / heat operation: -70°C to 180°C Temperature change per unit of time: Cooling down: approx. 2.5 K/min Heating up: approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 9.1 kW Rated current: 19 A Fuse (customer-supplied): 32 A slow-blow Permissible weight of test specimen: Total load of the shelf supports: 80 kg Test chamber floor: 80 kg, insert shelf: 40 kg Refrigerant: R 404A/R23 Weight: 675 kg Type: WT-600/70 For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We are happy to answer any further questions you may have by phone.

Condition: excellent (used), Heraeus Shock Test Chamber We offer a shock test chamber here. Temperature shock test cabinet, water-cooled Two-chamber design Warm chamber: The temperature control of the warm chamber ranges from +50°C to +220°C Temporal temperature deviation in the center of the usable space ± 1 K Spatial temperature deviation ± 2 K Temperature change rate Heating 11 K/min Cold chamber: The temperature control of the cold chamber ranges from -65°C to +70°C Temporal temperature deviation in the center of the usable space ± 1 K Spatial temperature deviation ± 2 K Temperature change rate Heating 2 K/min Cooling 3 K/min Test chamber volume 125 liters Klsdpfx Anozd R Azoysu Temperature range, warm chamber +50°C to +220°C Temperature range, cold chamber -80°C to +70°C Test chamber dimensions: width 470mm, depth 650mm, height 410mm External dimensions: width 930mm, depth 2115mm, height 1970+mm Rated power 10 kW Rated current 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant R404A / R23 Weight: 1000 kg For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Type: HT 7012 S2 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are reserved!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), RS Simulators We offer a climate testing chamber here. Water-cooled 300 liters Temperature range from -75 °C to +180 °C Time deviation: +- 0.2 K to +- 0.8 K Average heating rate: approx. 2.1 K/min Kjdpfszd R Aujx Anyolu Average cooling rate: approx. 1.2 K/min Humidity range from 10 % to 98 % relative humidity Operating climate range Temperature: 10 °C to 95 °C Humidity: 25 % to 75 % relative humidity Dimensions: Width 1000 mm, Height 1800 mm, Depth 1400 mm Voltage: 3x400V/N/PE, Current: 40A Refrigerant: R404a / R23 Type: KS 300 / 75 Weight: 630 kg For your safety as a buyer, please note the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Year of construction: 2011, condition: excellent (used), CTS Type: T-30/950 Ex/I CTS Temperature Test Chamber, Explosion-Proof Control – 32-bit controller LCD control panel Digital display for set and actual values Numerical input of set values Error messages in plain text RS 232 interface Free switching channels for product-side test specimen activation Temperature Testing: Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Temperature change rate: Heating: 2 K/min Cooling: 1.5 K/min down to -10°C Thermal radiation: approx. 1000 W at +20°C approx. 200 W at -25°C Nitrogen inerting with residual oxygen monitoring With nitrogen inerting, the test chamber is first purged with a large flow rate of N2 until the o2 content drops below 3%. Then, it switches to a base flow amount (approx. 10% of the large flow rate). The nitrogen flow for the base amount is measured and displayed using a flowmeter and monitored via a limit switch. O2 monitoring continuously extracts gas from the test chamber via a flame arrestor and passes it over an O2 sensor which checks the residual oxygen content of the extracted air. Afterwards, the gas is returned to the test chamber via a second flame arrestor. The extraction pump is monitored by a volumetric flow meter. Additional details can be found in the Dräger user manual in the appendix. The gas system is currently deactivated! All technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without irradiation, and without additional equipment. Dimensions: Test chamber volume: 950 liters Test chamber dimensions: Height approx. 700 mm / Width approx. 900 mm / Depth approx. 1500 mm External dimensions: Height approx. 2400 mm / Width approx. 1270 mm / Depth approx. 3125 mm Operating data: Electrical connection: 400V +6/-10 %, 3/N, 50 Hz Nominal power: 21.6 kW Rated current: 36.5 A Protection class: IP 54 Condensate drain: non-pressurized, R 1/2" inner thread Kedpfxezd Rzwj Anyslu Sound pressure level:

Condition: excellent (used), Here, we offer a Vötsch shock test chamber. Temperature shock test cabinet, water-cooled Two-chamber design Warm chamber: The temperature control of the warm chamber ranges from +50°C to +220°C Temporal temperature deviation in the center of the usable space ± 1 K Spatial temperature deviation ± 2 K Temperature change rate Heating 11 K/min Cold chamber: The temperature range of the cold chamber is from -80°C to +70°C Temporal temperature deviation in the center of the usable space ± 1 K Spatial temperature deviation ± 2 K Temperature change rate Heating 2 K/min Cooling 3 K/min Test chamber volume 125 liters Temperature range, warm chamber +50°C to +220°C Temperature range, cold chamber -80°C to +70°C Test chamber dimensions: width 470mm, depth 650mm, height 410mm External dimensions: width 930mm, depth 2115mm, height 1970+mm Feedthrough ∅ 67mm Rated power 10 kW Rated current 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant R404A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate Kedpfjzd Rzksx Anyslu 4. After successful inspection, the chambers will be subjected to a test run, which will be monitored with calibrated devices. Type: VT 7012 S2 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Weiss Temperature Chamber Here we offer a Weiss temperature chamber. Converted to R452a Weiss Temperature Chamber, Air-Cooled Temperature range: from -30°C to 180°C Kodpjzd Rw Sjfx Anyjlu Temperature change rate, cooling: 1.6 K/min Temperature change rate, heating: 2.1 K/min Test chamber dimensions: width 550 mm x depth 750 mm x height 800 mm Housing dimensions: width 800 mm x depth 1500 mm x height 1800 mm Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 4.9 kW, rated current: 9 A Refrigerant: R452a Weight: 515 kg Type: WT1-340/30 For your safety as a buyer, please note the following information: The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: as good as new (ex-display), Year of construction: 2020, Here we offer you a resistance welding system. The system is designed for the automated resistance welding of the following joints: Housing + QLT Housing + Heater Service Unit P450 Kodozd Rmgjpfx Anyelu Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any use of the system other than that described above is not intended and therefore not permitted! System layout: Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (lxb) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator: 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components: - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Control: ST-T13V2.0 Power unit: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Type: BDE11154003 Condition: unused, machine has never been used in production Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Here, we offer a TOX pressing machine, specifically the TOX-C bracket press. TOX Pressotechnik pressing machine, TOX-C bracket press. Pneumohydraulic manual workstation with process monitoring for pressing in functional elements. Technical data: Press type: EMB 030.068.Α.001 Drive: KWE3O.0O.17O.10H Pneumatic connection: G3/4'' Compressed air treatment: Filtered and dried compressed air, max. particle size 40 µm Air pressure during working process: Pmin. = 3.0 bar, Pmax. = 6.0 bar Pressing force: 170 kN Total stroke / return stroke: 170 mm / 10 mm Control: STE 326-366-3/4"-90-230V/AC special, complete Electrical connection: 90-230V/AC Ambient temperature during operation: Tmin. = 10°C, Tmax. = 60°C TOX pressing monitoring: EPW 500FP, force/travel measurement Holding device: ZHE for TOX press Dimensions: Width 1917.5 mm, Height 2506 mm, Depth 1917.5 mm Protective grid system: Leuze B20/B21 light curtain Pressing tool: See (pictures 15 to 18) Ksdpfozd Rhkex Anyslu Pressing sleeve (picture 17): 24.5 ∅ mm Application area, use: Pressing Weight: 2200 kg Type: EMB 030.068.A.001 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Year of construction: 2014, machine/vehicle number: 0102-260015, The Behringer HBE 261 A Dynamic automatic band saw is a fully hydraulic, cost-effective, high-performance band saw designed for automated 90° cuts in industrial manufacturing. Kljdpfxszfw Dhs Anyou This Behringer band saw is ideal for the safe, precise cutting of structural steel sections as well as difficult-to-machine solid metal materials and comparable solid plastics, in both manual and automatic modes. The HBE 261 A Dynamic automatic band saw has a cutting range of 10 mm to 260 mm for round material and 10 x 8 mm to 300 x 260 mm for flat material, with a saw blade size of 4.440 x 34 x 1.1 mm. The frequency-controlled band saw drive has a drive power of 2.6 kW and a continuously variable cutting speed of 15–110 m/min. The cutting speed can be set and read on the control panel. The total drive power is approximately 3.7 kW. The machine features optional equipment such as a chip conveyor, central lubrication, a line laser, electronic monitoring of the minimum speed, an LED worklight, a spray gun for chip removal, a cutting display with error diagnosis, and a roller conveyor system on the infeed and outfeed sides.

Condition: used, mileage: 290,000 km, power: 213 kW (289.60 HP), first registration: 03/2019, fuel type: diesel, number of seats: 42, gearing type: automatic, next inspection (TÜV): 03/2027, emission class: euro6, color: white, brakes: retarder, Year of construction: 2019, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Chat now via WhatsApp: Get in touch quickly and easily with our sales consultant. Attention!!! Sales are primarily to business customers. Internal ID number: [3366] Please schedule an appointment! Vehicle location: Auf dem Sand 24 in 40721 Hilden ----Optional extras: * Nationwide delivery * Financing/leasing also possible without a down payment ----Vehicle highlights: * First owner * German vehicle * Regularly serviced * Immediately ready for use * Euro 6 standard MAN Lion’s City LE / A78 Vehicle data Manufacturer: MAN * Model: Lion’s City LE A78 * First registration: March 22, 2019 * Mileage: approx. 290,000 km * Engine: 6-cylinder diesel * Power: approx. 290 hp / 213 kW * Emission class: Euro 6 * Transmission: Automatic * Length: approx. 11.90 m * Width: approx. 2.55 m * Permissible total weight: approx. 18,000 kg Klsdpfsy Srg Tsx Anyeu * Tires: 275/70 R22.5 Seats / Passenger compartment * 42 seats * Approx. 40 standing places * Wheelchair/stroller space * Passenger seats with seat belts * Low-floor/low-entry design * Wheelchair ramp at door 2 * Folding ramp / entry aid * Grab rails * Interior with red grab rail trim * Well-maintained passenger compartment * Passenger information / monitor * Interior display / stop display * Public address system Comfort / Climate / Heating * Large passenger air conditioning system * Roof air conditioning / auxiliary air conditioning * Driver's seat with air conditioning * Auxiliary heating / parking heater * Passenger compartment heating * Ventilation system * Electric roof vents * Heating / air conditioning controls in the passenger compartment Technology / Safety * Automatic transmission * Retarder * ABS * ASR * Electronic braking system * Stop brake * Parking brake * Rear view camera with monitor * Digital control units / tachograph * Driver's workstation with extensive control panel * Electrically adjustable and heated exterior mirrors * Several electric doors * Door control at the front and rear * Kneeling function / lowering * Ramp for wheelchair / stroller area * Emergency equipment available Additional equipment * LED interior lighting * Passenger monitor / DB Bahn display * Radio / USB * 24V system * Fire extinguisher / emergency equipment * Large exterior mirrors * Side windows partially with folding / sliding windows Would you like to lease or finance? We offer attractive offers – even without a down payment! Please contact us. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln - Germany Opening hours: Mon-Fri: 9:00 a.m. - 6:00 p.m. Sat: 9:00 a.m. - 2:00 p.m. Note: All information on the internet is non-binding and serves only as a general description of the vehicle. Errors, typos and prior sale are reserved. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances. We prefer to sell vehicles with a mileage of over 50,000 km or older than 3 years to our business customers.

Condition: used, mileage: 290,000 km, power: 213 kW (289.60 HP), first registration: 03/2019, fuel type: diesel, number of seats: 42, gearing type: automatic, next inspection (TÜV): 03/2027, emission class: euro6, color: white, brakes: retarder, Year of construction: 2019, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Chat with us now via WhatsApp: Get in touch quickly and easily with our sales consultant. Attention!!! Sale preferably to commercial businesses. Internal ID number: [3366] Please schedule an appointment! Vehicle location: Auf dem Sand 24, 40721 Hilden ----Optional extras: * Nationwide delivery * Financing / Leasing possible, even without a down payment ----Vehicle highlights: * 1st owner * German vehicle * Regularly serviced * Immediately ready for use * Euro 6 standard MAN Lion’s City LE / A78 Vehicle data Manufacturer: MAN * Model: Lion’s City LE A78 * First registration: 22.03.2019 * Mileage: approx. 290,000 km * Engine: 6-cylinder diesel * Power: approx. 290 hp / 213 kW * Emission class: Euro 6 * Transmission: Automatic * Length: approx. 11.90 m * Width: approx. 2.55 m * Permissible total weight: approx. 18,000 kg * Tires: 275/70 R22.5 Seats / Passenger compartment * 42 seats * approx. 40 standing places * Wheelchair / stroller space * Passenger seats with seat belts * Low-floor / Low-entry design * Wheelchair ramp at door 2 * Folding ramp / entry aid * Grab rails * Interior with red grab rail fittings * Well-maintained passenger compartment * Passenger display / monitor * Interior display / stop display * Intercom system / public address system Comfort / Climate / Heating * Large passenger air conditioning system * Roof air conditioning / additional climate control * Driver's seat with air conditioning * Auxiliary heater / parking heater * Passenger compartment heating * Ventilation system * Electric roof vents * Heating / climate control unit in the passenger compartment Technology / Safety * Automatic transmission * Retarder * ABS * ASR * Electronic braking system * Stop brake * Parking brake * Rear-view camera with monitor * Digital control devices / tachograph * Driver's workstation with extensive control panel * Electrically adjustable and heated exterior mirrors * Several electric doors * Door control at the front and rear * Kneeling function / lowering * Ramp for wheelchair / stroller area * Emergency equipment available Other equipment * LED interior lighting * Passenger monitor / DB Bahn display * Radio / USB * 24V system * Fire extinguisher / emergency equipment * Large exterior mirrors Ksdsy Srgyepfx Anyolu * Side windows partially with hinged / sliding windows Do you want to lease or finance? We offer attractive deals - even without a down payment! Feel free to contact us. Contact: Telephone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln - Germany Opening hours: Mon-Fri: 9:00 a.m. - 6:00 p.m. Sat: 9:00 a.m. - 2:00 p.m. Note: All information on the internet is non-binding and serves only as a general vehicle description. Errors, typing errors and prior sale are reserved. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances. Vehicles with a mileage of over 50,000 km or older than 3 years are preferably sold to our business customers.