Used Monitoring for sale (5,059)

Condition: excellent (used), Year of construction: 2004, operating hours: 1,000 h, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 350 mm, turning diameter: 200 mm, travel distance X-axis: 240 mm, rapid traverse X-axis: 12 m/min, Hembrug Mill-Turn Machine Model: Slantbed Mikroturn 100 CNC Siemens 840D Control Approximate Actual Run Time Hours: 1,000 Hydeostatic Spindle Hydrostatic Ways Scale Feedback Suspended Granite Bed Garnite Spindle Housing Coolant Pump Coolant Circulation Pump Pneumatic Bearing Purge Hydraulic Temperature Control Coolant Temperature Control Return Oil Pump and Reservoir for Remote Location of Hydraulic / Cooling Unit. Options & Additional Purchased Features: Tailstock Vacuum Pump for Vacuum Chucking Programable Controlled Spray Mist C-Axis Milling / Drilling Renishaw Tool Touch Probe Non-Contact Tool Incoming Air Dryer / Filter Thousands of Dollars of Brand New Tooling: Live Center Tailstock Taper Adapter 8” Micro-Centric Pneumatic Chuck 3 Sauter Straight Live tooling heads 2 Sauter 90 degree Live tooling heads 1 Special VDI offset Tooling holder 16 VDI Tool Holders for Turning, boring, and on center drilling. Pgjdswcfgbjpfx Af Ieg Tool Pick-up Video System Additional Backup Hard Drive with Software Fully Loaded and Tested. Extra Siemens Control Pannel Complete Set of Manuals Machine Upgrades I added at additional cost. New Digital Hard Drive New Backup Hard Drive with software already loaded, plug and play ready, no downtime. New Z-Axis Heidenhain Scale Rewound Hydraulic Pump Motor, factory motor was running too hot for my liking. Replaced Operator Panel, back light on monitor went out, have the original, back light needs replacing. 50 Foot Extended Wiring Harness For Remote Location of Hydraulic / Cooling Unit.

Condition: used, Year of construction: 2018, DMG Mori Sprint 32/8 CNC Swiss Lathe Mfd. 2018 Control: Fanuc 32-B Plus 8-Axis Power: 75 HP RPM 8,500 Diameter: 32mm With 12-ft Patriot 338 Bar Feed Equipped as pictured Machine concept Number of linear axes + C-axes 6 + 2 Number of spindles 2 Number of channels 2 Main spindle Maximum bar capacity mm | in 32 | 1.26 Speed rpm 8,500 Power (S2 30 min/S1) kW | hp 7.5/5.5 | 10.1/7.4 S2 15 min/S1 Torque (S2 30 min/S1) Nm | ft lbs 51.9/40.4 | 38.3/29.8 S2 15 min/S1 Counter spindle Maximum bar capacity mm | in 32 | 1.26 C-axis (0.001°) Speed rpm 8,500 Power (S2 30 min/S1) kW | hp 3.7/2.2 | 5.0/3.0 Torque (S2 30 min/S1) Nm | ft lbs 23.6/14 | 17.4/10.3 Working area/ travels Z1 travel (spindle travel) mm | in 100 | 3.94 Rapid traverse speed on linear axes X1, Z1, X2, Z2/Y1, Y2 m / min | in/ min 40/30 | 131/98 Acceleration in linear axes m /s² | ft 5 | 0.02 Tool holder on slide 1 Fixed turning tools 6 Tools for front machining/back-working 4/4 Driven tools 2 + 2 Maximum speed rpm 6,000 Power (S3 40 % /S1) kW | hp 1.9/1 | 2.5/1.3 Maximum torque (S3 40 % /S1) Nm | ft lbs 3. The 2018 DMG Mori Sprint 32/8 is a high-performance CNC screw machine built for precision, speed, and versatility in complex small-part production. Featuring an 8-axis configuration with 6 linear axes and 2 C-axes, the machine is powered by the FANUC 32i-B Plus control system with a 10.4” color display. The Sprint 32/8 is designed with dual spindles capable of 8,500 RPM, with the main spindle delivering 7.4 hp and 29.8 ft-lbs of torque, and the counter spindle generating 3 hp and 10.3 ft-lbs. Both spindles handle bar stock up to 32mm (1.26"), making it ideal for precise machining in medical, aerospace, and automotive industries. Pedpjxxm A Tsfx Af Iegg The machine supports simultaneous machining with up to 2 tools and offers advanced back-working capabilities. The working area includes Z1, X1/Y1, and X2/Z2/Y2 travels, allowing for intricate multi-sided operations. Tooling includes 8 driven tool stations and multiple configurations for both front and back machining, with speeds up to 6,000 RPM and torque of 2.2 ft-lbs. The Tool Monitoring System offers graphical tool load display, aiding in predictive maintenance and minimizing downtime. Additional features include high-pressure coolant and an integrated air handler, contributing to stable thermal conditions and chip evacuation. Its compact footprint of 30.1 ft² and total weight of 7,826 lbs make the Sprint 32/8 a space-efficient and powerful addition to any high-volume CNC shop. This machine is engineered to streamline part production while ensuring repeatable accuracy, robust power, and operational efficiency.

Condition: excellent (used), Year of construction: 2019, Doosan Puma TT2100SYY Pgjdew Dvnxepfx Af Ieg Mfd. 2019 Tooled as pictured Specifications SWING OVER BED 9.05" MAX CUTTING DIAMETER 9.05" DISTANCE BETWEEN CENTERS 38.5" X-AXIS TRAVEL 6.5" Y-AXIS Yes Y-AXIS TRAVEL 3.93" Z-AXIS TRAVEL 27.5" C-AXIS INDEXING FULL CONTOURING C-AXIS CHUCK SIZE 8" BAR CAPACITY 2.625" SPINDLE NOSE A2-6 SPINDLE MOTOR 35 hp SPINDLE SPEED 5,000 RPM RAPID TRAVERSE RATE - X-AXIS 1,181 in/min. RAPID TRAVERSE RATE - Z-AXIS 1,575 in/min. SUB SPINDLE Yes SUB SPINDLE - CHUCK SIZE 8" SUB SPINDLE - BAR CAPACITY 2.56" SUB SPINDLE - SPINDLE NOSE A2-6 SUB SPINDLE - SPINDLE MOTOR 25 hp SUB SPINDLE - SPINDLE SPEED 5,000 RPM SUB SPINDLE / W-AXIS TRAVEL 28.7" TURRET CAPACITY 12 TURRET TYPE BMT55 LIVE MILLING Yes LIVE MILLING SPEED 5,000 RPM LIVE MILLING MOTOR 10 hp TURRET 2 CAPACITY 12 TURRET 2 - X-AXIS TRAVEL 6.5" TURRET 2 - Z-AXIS TRAVEL 27.56" Dimensions 93" X 153" (W/CONVEYOR - 186") X 88.6"H Weight 20,940 LBS Equipped With FANUC OiTF CNC CONTROL DOOSAN EZ GUIDE i PROGRAMMING TWIN 12 POSITION TURRETS UPPER AND LOWER, W/24 POSITION INDEXING ON EACH TURRET WITH BASE MOUNT TOOLING SYSTEM Y-AXIS ON BOTH TURRETS (2) INTEGRAL SPINDLES FULL CONTOURING C-AXES ON BOTH SPINDLE MILL/DRILL ON UPPER AND LOWER TURRETS PARTS CATCHER LEFT AND RIGHT PROGRAMMABLE PARTS UNLOADER PARTS CONVEYOR BAR FEED INTERFACE 8" 3-JAW KITAGAWA CHUCK FOR LEFT AND RIGHT SPINDLES (COLLET SYSTEMS IN ON MACHINE NOT INCLUDED IN SALE) (2) X-AXIS LIVE HOLDERS (2) Z-AXIS LIVE HOLDERS STANDARD FACTORY STATIC TOOLING DOOSAN TOOL LOAD MONITORING SYSTEM AIR BLAST SYSTEM FOR CHUCK CLEANING 2 machines available

Condition: good (used), Year of construction: 2013, TOYODA (JTEKT) GL32M-63 CNC UNIVERSAL CYLINDRICAL GRINDER Equipped with: CBN Grinding Wheel Flagging Steady Rest Workhead Mounted Rotary Dresser Marposs P3SE System Monitoring Toyoda In Process Gaging Pjdportrzpjfx Af Ijgg Marposs E20N Acoustic Controller Air Gap Eliminator Workpiece Collision Control Coolant Pumps W/Magnetic Separator Pendant Control RH Workhead with Center LH Workhead with Center Work Rests Worklight Light Curtains Stacklight Extra Wheels Specifications: -Grind Center to Floor: 1,000 mm -Swing Over Table: 320 mm -Distance Between Centers: 630 mm -Grinding Diameter Range: 10 - 150 mm -Floor Space (Base machine w/auxiliary equipment): 3,400 x 5,000 mm -Net Machine Mass (approx.): 10,500 kg Grinding Wheel: -Type: CBN Wheel -Wheel Size (OD): 350 mm -Maximum Wheel Width: 60 mm -Surface Speed: 120 m/s Wheelhead: -Spindle Bearing: TOYODA STAT Bearing -Slide: V and Flat -Feed System: Ballscrew -Rapid Feed (on diameter): 30 m/min -Minimum Incsrement (on diameter): 0.0001 mm Workhead: -Type: Dead Spindle -Work Speed (Max): 500 rpm -Center Taper: MT #4 Footstock: -Type: Hydraulic -Taper Compensation: Manual -Maximum Center Retraction: 60 mm -Center Taper: MT #4 Motors: -Wheel Drive Motor: 15 kW, Belt-Drive -Wheelhead Feed Servomotor: 1.3 kW Tank Capacities: -Wheel Spindle Lubrication Oil: 80 L -Hydraulic/Lubrication Oil: 20 L

Condition: good (used), mileage: 1,084,840 km, power: 375 kW (509.86 HP), first registration: 01/2016, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 6x2, wheelbase: 4,150 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,550 mm, total width: 2,550 mm, total height: 3,700 mm, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, traction control, = Additional Options and Accessories = - Digital tachograph - Tachograph (monitoring device) - Hydraulic system - PTO (power take-off) - Pump - Slider - Space Cab = Notes = Number of axles: 3, Configuration: 6x2, Unladen weight: 10,050 kg, Gross weight: 27,000 kg, Total fuel tank capacity: 650 liters, Fifth wheel height: 119 cm, Fifth wheel type: slider, Number of differential locks: 1, Suspension type: air suspension, Cabin type: Space Cab, Cruise control, Tachograph (monitoring device), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Colour: multicolour, Heated mirrors, Lighting type: LED lamp, Lane departure warning system, Heated seats, Bluetooth, Flashing lights, Engine power: 375 kW (503 hp), Fuel: diesel, Emission standard: Euro 6, Transmission type: AS-Tronic, Make: ZF, Gears: 12, Power steering, ABS, ASR, Hydraulic system, PTO, PTO type: 1, Starter battery, Pump, Central locking, Seating configuration: 1+1, Seat upholstery: leather, Seat adjustment: manual = Further Information = Transmission Gearbox: ZF, 12 gears, automatic Axle configuration Brakes: disc brakes Axle 1: Tire size: 385/65R22.5; Steering; Tread left: 10 mm; Tread right: 7 mm; Suspension: leaf suspension Axle 2: Tire size: 385/55R22.5; Lift axle; Steering; Tread left: 15 mm; Tread right: 14 mm; Suspension: air suspension Axle 3: Tire size: 315/70R22.5; Twin tires; Tread left inside: 6 mm; Tread left outside: 6 mm; Tread right inside: 5 mm; Tread right outside: 6 mm; Suspension: air suspension Weights Unladen weight: 10,050 kg Payload: 16,950 kg Gross vehicle weight: 27,000 kg Functional Pump: Yes Condition Technical condition: good Visual condition: good Damages: none Number of keys: 1 Identification Registration: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offer includes all European brands, model years, and price ranges. Pgjdpfx Aoyfmbkjf Iog Why buy from Kleyn Trucks? Simple! • Large, fast-moving inventory • Recognizable quality • Competitive prices • Professional business conduct • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates are arranged quickly • Expert technical services • The safety of 'recognizable quality' • And much more... Please visit our website for special offers and our complete stock. Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an enquiry on our website. Ask directly about our European warranty package.

Condition: good (used), mileage: 959,661 km, power: 340 kW (462.27 HP), first registration: 02/2016, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,200 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking air conditioner, parking heater, power mirror, traction control, = Additional Options and Equipment = - Digital tachograph - Tachograph (monitoring device) - Hydraulic system - PTO (Power Take-Off) - Pump - Slider - Space Cab = Remarks = Number of axles: 2, Configuration: 4x2, Payload: 12,318 kg, Curb weight: 8,182 kg, Gross weight: 20,500 kg, Total tank capacity: 845 liters, Fifth wheel height: 116 cm, Fifth wheel type: Slider, Number of differentials: 1, Suspension type: Air suspension, Cabin type: Space Cab, Cruise control, Tachograph (monitoring device), Digital tachograph, Air conditioning, Standalone air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Color: Blue, Heated mirrors, Lighting type: Halogen lamp, Speed limiter, Lane departure warning system, Climate control, Heated seats, Blind spot monitoring, Flashing lights, Engine power: 340 kW (456 HP), Fuel: Diesel, Emissions standard: Euro 6, Transmission type: AS-Tronic, Transmission manufacturer: ZF, Speed limiter, Gears: 12, Power steering, ABS, ASR, Hydraulic system, PTO (Power Take-Off), PTO type: 1, Starter battery, Pump, Central locking, Seats: 2, Seat configuration: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual Pgsdpfowlz A Rex Af Ieg = Additional Information = Transmission Transmission: ZF, 12 gears, automatic Axle Configuration Brakes: Disc brakes Axle 1: Tire size: 385/65R22.5; Steering axle; Tire tread left: 4 mm; Tire tread right: 3 mm; Suspension: leaf spring Axle 2: Tire size: 315/70R22.5; Twin tires; Tire tread inside left: 6 mm; Tire tread outside left: 8 mm; Tire tread inside right: 5 mm; Tire tread outside right: 6 mm; Suspension: air suspension Weights Empty weight: 8,182 kg Payload: 12,318 kg Gross Vehicle Weight (GVW): 20,500 kg Functional Pump: Yes Interior Number of seats: 2 Condition Technical condition: good Optical condition: good Damages: none Number of keys: 1 Identification Registration number: 31-BGX-2 = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands across different model years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-rotating inventory • Recognizable quality • Competitive prices • Professional business conduct • We speak multiple languages • We understand our customers • Assistance with import and transport • (Export) number plates arranged quickly • Expert technical services • The security of “recognizable quality” • And more.... Please visit our website for special offers and our complete inventory: Leasing through Kleyn Trucks is available in most European countries! Quickly calculate your lease rate and send a request via our website. Ask about our European warranty package directly.

Condition: used, functionality: fully functional, Year of construction: 2017, control type: CNC control, working width: 1,030 mm, stroke length: 200 mm, overall weight: 4,000 kg, Hydraulic Press Brake Make: BYSTRONIC Model: Xpert 40 Year of Manufacture: 2017 Technical Specifications Manufacturer: BYSTRONIC Operating hours: approx. 9,500 h Model: Xpert 40 Year: 2017 Press capacity: 40 t Bending length: 1,030 mm Stroke: 200 mm Distance between frames: 1,060 mm Motor power: 7.5 kW Weight: 4 t Dimensions: L 1.52 x W 1.60 x H 2.45 m Equipment • 6-axis backgauge • Hydraulic clamping top & bottom • RF-A tool holder, top • Height-adjustable ByVision Bending display with 22-inch Full HD touchscreen • Support table • Ergo LED work area lighting Podpfx Asyficdsf Ijgg • Low-noise Dynamic Drive System (DDS) with integrated EnergySaver • OPC Interface Bending • Bend curve generator • Automatic tooling overload protection • Oil cooler • Ergo foot switch • Rear sliding door with electrical monitoring All details without obligation. A powered demonstration is possible at any time in our showroom.

Year of construction: 2023, condition: used, Case maker Pgjdpfxoydc A Ie Af Iog Kolbus DA 370 Year: 2023 New generation of casemaker for faster production and shorter make-ready times. Automatic production of book cases, files, display cards, calendar backs or game boards, at rates of up to 65 cycles/min. Maximum production and process reliability in the manufacture of book cases. The DA 370 casemaker is a versatile machine for a wide range of applications. The machine with its non-stop case feeder is engineered to be ergonomic and extremely operator-friendly so that it can be easily operated by one person. Configuration: - Copilot system with touchscreen - sectional touch panel for direct operation - large display for showing the speed and malfunction messages - board prestacking conveyor to automatically reload the magazines (stream cover and stack feeder) - counter-stacker delivery with roller conveyor delivery incl. table - cloth feeder for non-stop operation with stack magazine - missing product check during separation of cloth and cardboard - cloth cylinder with grippers and interchangeable plates for rubber pads (5 plates 500 mm wide and 5 plates 720 mm wide, incl. 10 rubber pads) - cardboard centre strip magazine - device used to prepare centre strip roll - centre strip waste chopper - centre strip rub-down unit (head and foot) - rub-down unit used to bond the covering material to cardboards and spine strip without creases - extendable gluing station for processing hot glue with glue preparation in the premelter, heated glue roller and scraper roller - viscosity control unit for an automatic supply of water via a water container with a pump - device for padded cases - function used to request individual cases for monitoring purposes on the operating side - servo-controlled drive technology based on Siemens technology Special equipment: - device for producing quarter-bound cases in two operating steps - device for small format - device for large format - Remote Service Gateway Technical specifications: - Mechanical speed: up to 65 cycles/min - Open cover size max.: 205 x 670 mm - Joint width: 4 - 15 mm - Spine width: 14 - 120 mm - Turn in width open: up to 19 mm - Cloth width: 223 - 708 mm - Cloth height: 158 - 428 mm - Board thickness: 1 - 4 mm - Board width: 95 - 328 mm - Board height: 140 - 390 mm - Board centre strip thickness: 1 - 4 mm - Board centre strip width: 6 - 90 mm - Centre strip roll thickness: 0,3 - 0,6 mm - Centre strip roll width: 6 - 90 mm - Lining width: 195 - 670 mm - Lining height: 130 - 390 mm

Condition: used, Year of construction: 2006, table length 3000 mm table width 1500 mm laser capacity in Watt 4000 Equipment: - Closed machine frame with integrated laser unit - Laser unit: CO2 laser TFL 3200 high-frequency unit, maintenance-free turbo radial blower radial turbo blower, mirror telescope - Automatic pallet changer - Longitudinal conveyor belt for small parts / waste Podpjydfngofx Af Iogg - Drives: Maintenance-free three-phase servomotors - Additional highly dynamic Xp-axis - Cutting head quick-change device - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure setting - APC capacitive height adjustment and process control - Automatic focus position adjustment AutoLas Plus - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLAS - ContourLAS for the production of smaller holes - PMS plasma sensor technology - Automatic sheet outer edge detection - Programmable power cycles - Compressed air cutting - PCS Process Control System - Microweld - Spraying device for safe thick sheet metal processing - Automatic switch-off - Work area lighting - Sinumerik 840D control system: Open control system on PC basis, simple operation, online help, integrated e-shop, diagnostic function, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: Multi-rigid light barriers, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction system and compact dust extractor, safety cabin

Year of construction: 2021, condition: used, General information Field of application: Freight transport Technical information Power: 220 kW (299 HP) Engine capacity: 7.698 cc Type of fuel: Diesel Transmission: Automatic Carrying capacity: 500 kg Condition General condition: good Technical condition: good Visual appearance: good Other information Pgjdeydi Spspfx Af Iog Vehicle's outer dimensions: 10x2,5x3,25 Production country: DE Additional information Please contact Christian Theißen for more information Manufacturer: Rosenbauer Model: L 32 A XS (DLK 23-12) Year of build: 2021 Condition: Used Data: First registration: 11/2021 Fuel type: Diesel Gear type: Automatic Drive type: Switchable 4WD (Allison Transmission) Engine power/displacement: 220 kW / 7.698 Max. working height: 32,00 m Max. platform height: 30,10 m Total permissible weight: 16.000 kg Empty weight: 910735: 14.275 kg / 910736: 14.305 kg Dimensions LxWxH: 10 x 2,5 x 3,25 m Colour: Red (RAL 3000), ladder set: anthracite Supports: individually controllable, continuous horizontal and vertical support, with ground pressure monitoring and axle locking Support width: min. 2,50 m / max. 4,80 m Number of axles: 2 Seats: 3 (1 driver seat and 2 passenger seats) Lighting: area lighting compliant with EN 1846T2 (LED type), top surface lighting (LED-bands), locker compartment lighting (LED-strips), 2x LED-headlights mounted to the basket and main operator station, 2 high performance LEDs located at the base and the sides of the rescue basket (forward shining) Ladder set: 5-section ladder, articulating arm, fully automatic, aluminum pipe permanently installed in the top ladder section, lifting lug at the basket fork, lifting eye enables usage of the ladder as a lifting device (lifting capacity: up to 4 tons at the lower section, up to 400 kg at the tip of the ladder) Payload: max. 500 kg (with basket), 600 kg (without basket) Max. basket load: 500 kg / 5 people Max. Wind force: 22 m/s Equipment: Rear view camera, cameras at the front and bottom of the rescue basket as well as the jib (enables surveillance of the presonnel inside the rescue basket when out of viewing range), color display inside the driver's cab and at the stabilizer control station, analogue load indicator located at the ladder set, automatic retraction of the ladder set, ARF (Automatic-Return-Function), active vibration dampening, TMS (Target-Memory-System), VRS (Vertical-Rescue-System) Special features: Warning lights and sirens, main operator station with display, foldable roof and heated seat, aluminum safety podium with 6 locker compartments with shutters for various equipment, rescue basket with detachable multi functional pillars and two anchor points for PFPE (Personal Fall Protection Equipment), 360°/infinitely rotatable stretcher mount can be attached at the bottom of the rescue basket, additional hose C-coupling at the rescue basket/monitor, CAN bus control, generator RS14, 400V motor for emergency operation of the turntable ladder, connectors for Motorola as well as Sepura, heated windschield wipers, radio Location: 41468 Neuss immediately available

Condition: good (used), Year of construction: 2017, functionality: fully functional, Technical details core drilling diameter max. 3 - 28 mm bore depth 1000 mm control Heidenhain TNC 640 x-axis 1000 mm y-axis 800 mm z-axis 800 mm spindle head - swivable (W) +15°/-30° deg B-axis (table) 360.000° deg table surface area 1000 x 1000 mm table load 5,0 t tool taper SK 40 spindle turning speed range 60 - 6000 U/min spindle motor 12 kW total power requirement 58 kW weight of the machine ca. 14 t dimensions of the machine ca. 6,35 x 4,75 x 3,80 m Additional information 5 axes Deep Drilling-Milling-Machine A current geometry measurement report is available. Equipped with: HEIDENHAIN TNC 640 control 5 CNC AXES X – Y – Z – W – B NC rotary table 360.000 deg. Milling performance 150 cm3/min. Direct linear position measuring system Digital AC drives Table design with Hirschmann zero-point clamping system NC-controlled tilting of the deep hole drilling/milling unit (W) +15/-30 deg. Automatic tool changer for 24 tools Internal coolant supply High-pressure coolant system 1200 liters for deep hole drilling oil up to 140 bar Pgedeydmmqepfx Af Iog Paper belt filter system SIEMENS extinguishing system Fire protection system Spindle cooling Oil temperature control 3D HEXAGON probe RENISHAW tool measurement Electronic handwheel OPT kinematics Chip conveyor Coolant pressure and flow control Collision and vibration monitoring Feed control Coolant gun MONTRONIX machine airbag Oil mist extraction 2 clamping plates Walk-in full enclosure with roof and opening for crane loading Included in delivery: Operating manual Documentation Machine parameters on USB stick

Condition: excellent (used), Memmert Model: Memmert UF750plus Description: For sale is a Memmert UF750plus universal cabinet/drying oven in a high-quality industrial design. This unit is ideally suited for drying, heating, tempering, aging, burn-in, curing, and testing of materials in laboratories, industry, research, and quality assurance. Equipped with the Memmert ControlCOCKPIT TwinDISPLAY control system, the chamber offers precise temperature regulation up to 300 °C, uniform air circulation, and comprehensive safety and alarm functions. The entire interior is made of stainless steel, easy to clean, and engineered for heavy-duty use. The unit is mobile, robust, and designed for continuous professional operation. Technical data (UF750plus) General Manufacturer: Memmert Model: UF750plus Type: Universal drying oven Internal volume: approx. 749 liters Max. temperature: +300 °C Temperature range: +20 °C to +300 °C (at least 10 °C above ambient temperature) Controls & Technology ControlCOCKPIT TwinDISPLAY (2 TFT color displays) PID microprocessor control 2× Pt100 temperature sensors (DIN class A) Timer: 1 minute to 99 days Pedpjyc Swxjfx Af Iegg Electronically controlled forced-air circulation Electronically adjustable exhaust flap Ethernet & USB interface (AtmoCONTROL) Multi-level safety monitoring (TWW / TWB / AutoSAFETY) Electrical data Connection: 400 V three-phase (3×230 V + N + PE) Frequency: 50/60 Hz Power consumption: approx. 7 kW Rated current: approx. 10.1 A Dimensions External dimensions (W × H × D): 1224 × 1720 × 784 mm Internal dimensions (W × H × D): 1040 × 1200 × 600 mm Shelves: up to 14, 4 wire shelves included Load capacity: per shelf: 30 kg total: 300 kg Weight Net weight: approx. 217 kg Gross weight (with packaging): approx. 288 kg Other features Stainless steel internal chamber Mobile on castors (lockable) Made in Germany Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors! Data subject to change.) For further questions, please call us.

Condition: excellent (used), Zwick/Roell ProLine 10 kN Universal Testing Machine – testXpert II V3.61 Description: For sale is an electromechanical universal testing machine Zwick/Roell ProLine with a nominal force of 10 kN, equipped with a Zwick/Roell Xforce-P load cell and the materials testing software testXpert II, version 3.61. The system is suitable for standardized and customer-specific materials testing in quality assurance, research, development, and production. Its modular design allows the use of different testing methods and fixtures. Software – Zwick/Roell testXpert II V3.61 The machine is controlled via the professional testXpert II V3.61 testing software. This software is an industry standard in materials testing and enables: - Creation, management, and execution of test specifications - Real-time measurement of force, displacement, and time - Automatic test sequence control - Graphical display of measurement curves - Standard-compliant evaluation and test reports - Export of measurement results (e.g., PDF, CSV – depending on configuration) Several test routines (e.g., tensile, compression, and calibration procedures) are provided on the system (see software screenshots). Possible test methods: With the available equipment, the following tests can be performed, among others: - Tensile tests (e.g., plastics, metals, composites) - Compression tests - Bending tests - Determination of Fmax / breaking force - Force and displacement monitoring - Calibration and adjustment procedures for load cells (The available test methods depend on clamping jaws and fixtures used.) Technical data: Manufacturer: Zwick/Roell Model: ProLine Nominal force: 10 kN Load cell: Zwick/Roell Xforce P Sensitivity: 2 mV/V Electrical data: Power supply: 230 V Frequency: 50 / 60 Hz Current consumption: 3.5 A Connection: 1L / PE / N Dimensions & weight (approx.): Pedpoyc R R Dofx Af Iogg Height: approx. 1,900 mm Width: approx. 800 mm Depth: approx. 700 mm Weight: approx. 200 kg Important note: "The table shown in the photos is not included in the scope of delivery." Condition: used Scope of delivery: - Zwick/Roell ProLine 10 kN testing machine - Xforce-P load cell (10 kN) - Control unit - PC with testXpert II V3.61 - Fixtures/tools as shown in the pictures (Subject to changes and errors in technical specifications! All details provided as is.) For further questions, we would be happy to assist you by phone.

Condition: used, Year of construction: 2018, operating hours: 6,031 h, functionality: fully functional, Basic Package SM620 Plus: Central axle trailer chassis with 2 axles, 80 km/h EU road approval Braking system including ABS and lighting according to EU directive 50 mm EU towing eye, incl. mounting shoe Hydraulically adjustable support legs at the front on both sides and rear right Splash protection (inner and side mudguards) Tyres 435/50 R19.5 Permissible total weight 19,000 kg Deutz diesel engine TCD 3.6 L4, 85 kW at 1,800 rpm, compliant with emission standard EUROMOT TIER IV Final Hydraulically reversible fan at water and oil cooler Complete engine unit can be swung out Fuel tank 300 litres Feed hopper 5.0 m³ capacity Stone grid preparation Hydraulically folding side conveyor: belt length 5,500 mm, belt width 1,000 mm Hydraulically folding rear conveyor: belt length 5,500 mm, belt width 1,000 mm Hydraulic support cylinder between side and rear conveyor Emergency stop switches at side and rear conveyors Load-dependent material feed from conveyor floor to screening drum Continuously variable screening drum speed from 0 - 20 rpm Continuously variable hopper belt speed from 0 - 0.17 m/s Control box at the rear of the machine with the following functions: emergency stop switch, folding/retracting the rear conveyor, folding/retracting the side conveyor, side conveyor inclination and load control +/-, automatic mode on/off From the operator panel: fold/unfold side conveyor Hydraulically folding cleaning brush with individual brush segments and spring tines Centrally arranged wear strips 24 V electric control Underrun protection rear Side collision guard front (reinforced version) and rear both sides Hydraulic quick coupling between rear conveyor and machine Acoustic start-up warning, door monitoring Doppstadt telematics system Paintwork: RAL2011 deep orange Pgjdpfexx R Rhex Af Iog Basic version without screening drum Optional equipment: Flow divider on rear conveyor Delivery date by arrangement

Condition: used, Year of construction: 2013, Overview Complete filling line from the food sector made by the German manufacturer Breitner (2013). It was previously used for filling liquid cheese products and sealed with press on and screw closure. Further more spray pumps with rising pipes can be handled. Due to various additional features, such as a laminar flow system and special attention to hygienic design, a cleanroom classification is achieved. Machines: Pos. 1 Bottle unscrambler Breitner BFC 8002 (2013) Pos. 2 Filling machine Breitner MDL 2086 (2013) Pos. 3 Rotary capping machine Breitner SRT 5044 (2013) Conveyor systems: several conveyors included. All conveyors: Chain width: 82,5 mm Belt housing: stainless steel AISI 304 Belt guide: plastic c-profile, 2-fold and stainless steel rods Chain material: Delrin steel The unclosed bottles are protected of falling dirt by a roof made of plexiglas over the conveyor.  Bottle formats: Our service: send us your requirements and we will check the possibility of processing your bottle format. Cap formats: Screw caps, press-on caps, spray pumps with riser pipes   Our service: send us your requirements and we will check the possibility of processing your cap format. Capacity: Unscrambler: max. 6.000/h Filling machine: max. 5.000/h Rotary capping: max. 5.000/h The output depends on the container and cap geometries and the filling product.    1. Bottle Unscrambler BREITNER BFC 8002 Operation: continuous from supply bin Bin volume / drum Ø: 1.4 m³ / 1500 mm Working height: 900 mm, left → right Material / Housing: AISI 304 stainless steel + plexiglass Safety: door switches, overload protection Power / Air: 3 × 400 V, 4 kW / 400 Nl/min at 6 bar Container size: round Ø ≤100 mm × 250 mm, larger on request Feature: blow-cleaning station with ionized air and dust extraction 2. Filling Machine BREITNER MDL 2086 Filling: mass flow, 8 stations (expandable to 12) Filling range: 100 – 2000 ml/g, up to 5,000 bottles/h Working height / direction: 900 mm, left → right Product-contact parts: AISI 316, food-grade hoses, VITON seals Tank / Pressure: 100 L, 5 bar Power / Air: 3 × 400 V, 4 kW / 150 Nl/min at 6 bar Container size: H 50–350 mm, Ø/width 50–80 mm, various shapes CIP cleaning: 8 cleaning cups, automatic spray & drain, multi-step program Extras: laminar flow, remote maintenance, additional filling valves, swiveling tray, heating system 3. Rotary Capping Machine BREITNER SRT 5044 Operation: continuous rotary, 4 capping stations Output: up to 5,000 containers/h Container size: Ø ≤100 mm, H ≤300 mm Working height / direction: 900 mm, left → right Drive / Tools: servo motor, 0,3-3,5 Nm; BREITNER capping tools Power / Air: 3 × 400 V, 4 kW / 100 Nl/min at 6 bar Control: B&R controller, touchscreen, 200 format memories, password-protected Safety & inspection: door switches, overload, “No bottle – no closure,” optical cap check, reject system Extras: servo vertical movement, torque monitoring, fan-based cap feed, vibratory sorter VIB 8001, cap supply SFB 8001 Podpjxqzmwofx Af Isgg

Condition: used, Year of construction: 2012, Overview The Heuft InLine IXs reflexx is an empty bottle inspector for quality control in filling lines. The machine was commissioned in May 2012, is in very good condition and is ready for use at short notice. Technical details  Output: Up to 46,000 bottles/hour Control system: Heuft Synchron TX Network: Heuft Hlan, incl. gateway Licensing: 5 type licenses Equipment: Software wizard for troubleshooting and container changeover Availability: Ready for use at short notice Missing components Thread blow-off (must be added if required) Controls  Monitoring of the incoming bottle flow (optional) Output of a stop signal in the event of incorrect bottle dimensions Inspection of the bottle base, mouth sealing surface and thread Inspection of the inner and outer side wall Detection of conductive liquids (e.g. lye) and residual liquids (oils, paints) using IR technology Rejection of faulty containers or output of a rejection signal Scope of delivery  Spectrum TX conveyor control unit Measuring bridges for inlet control and rejection with height adjustment 2 x Delta K rejection units Air conditioning unit Various spare parts (pulleys, belts) Documentation and training documents (German) Transponder for test bottles Pgjdpfx Afsu Scr So Isg

Condition: used, Year of construction: 2013, Overview  This isobarometric filler was built in 2013 by the Slovenian manufacturer VIPOLL. This filler is available because it has been replaced by a larger machine. It has only a few operating hours and can be viewed in person at any time.   Technical Details  Capacity: 3,000 bottles / hour (according to manufacturer)  Formats: Currently set up for 330 ml longneck bottle  Counter-pressure filler with double pre-evacuation  Total operating hours: less than 1,000 hours  Running direction: right - left  Filling valves mechanical electropneumatic  Mechanical height adjustment  With color touch screen monitor  Dismantling and transfer took place in December 2023/January 2024  Optional (not included in the price): Bottle conveyor belts incl. loading and unloading table  Pedpfotm Hv Tox Af Iogg

Condition: used, Year of construction: 2011, Overview  This Heuft Glas InLine reflexx IR is an inspection machine for empty bottles, designed for quality control in filling lines. The machine has a maximum output of 46,000 bottles per hour and was originally delivered in December 2011. It is in very good condition and ready for use at short notice. The flow direction is from left to right and it is equipped with a Secomak blower instead of a compressed air blow-off system. Technical details  Output: Maximum 46,000 bottles/hour Flow direction: Left to right Equipment: Two triggers Secomak blower Transponder recognition for RFID test bottles Rejection monitoring Heuft HLAN network (can be retrofitted as an option) Two-way rejection Delta K to the right Four type licenses Delta K tripods for belt height of 1130 mm Two fluids for lye detection Missing components Infeed control (must be added if required) Thread blow-off (must be added if required) Documentation (not available, can be replaced) Controls  Monitoring of the incoming bottle flow (optional) Output of a stop signal if bottles are too high, too wide or lying down Inspection of the bottle base Inspection of the mouth sealing surface Inspection of the thread Inspection of the inner and outer side wall Detection of conductive liquids (e.g. lye) Detection of residual liquids (e.g. oils, paints) using IR technology Rejection of faulty containers or output of a rejection signal Monitoring of the rejection process Podju N Snkepfx Af Iegg

Condition: used, Year of construction: 2012, Overview  This 20 hL brewhouse was manufactured in 2012 by Schwarzenbeker. It is a 2-vessel system (Mash/Boil + Lauter/Whirlpool) with a net capacity of 18–19 hL and a maximum mash load of 600 kg. The brewhouse is steam-powered with a double steam jacket and PLC-based automation, offering recipe management and precise process control. It is in generally good condition, though a minor review is recommended. The package also includes a biomass steam generator (Teivy, 2012), a malt mill (Robix, 2012), and a plate filter (Cespedes, 2013). Technical data  Capacity: 20 hL gross / 18–19 hL net Configuration: 2-vessel system – Mash/Boil + Lauter/Whirlpool Max. mash load: 600 kg Average efficiency: 83% Average lautering time: 2 hours Heating system: Double steam jacket (lateral + bottom, independent) Max. pressure: 3 bar Automation: Touch-screen PLC, VFD for pump/agitator/cutter, temperature control, programmable mash recipes Monitoring: PT100 temperature probes in Mash/Boil and heat exchanger outlet CIP: Spray balls in Mash and Lauter vessels Safety: Pressure relief valve in Whirlpool Other features: Auger feed connection, operation manuals included Scope of Delivery  Brewhouse | Schwarzenbeker | 20 hL Brewhouse | 2012 | 2-vessel system, steam-heated, PLC automation Steam Generator | Teivy | Biomass Steam Generator | 2012 | Pellet-fired, fully functional Malt Mill | Robix | Roppi-1100 | 2012 | Incl. metal detector magnet Plate Filter | Cespedes | – | 2013 | 50–98 plates, adaptors included, no pump   Pgedpfx Ajyb S Egsf Iog

Condition: ready for operation (used), Year of construction: 2019, spindle motor power: 13,000 W, spindle speed (max.): 6,300 rpm, number of axes: 2, This EMCO E45 turn-mill centre was manufactured in 2019. It features a KK5 spindle with a bar capacity of 45 mm and a speed range up to 6300 rpm. The 12-position VDI30 tool turret supports 6 driven tools, enhancing versatility. Equipped with SINUMERIK 828D OPERATE control for precise operations and a robust design with a chip conveyor and high-pressure coolant system. Reach out for more information about this machine. • Connection: KK5 (DIN 55026) • Bar capacity: 45 mm • Drive power: 13 kW • Speed range: 0–6300 rpm • C-axis on main spindleTool turret • 12-position VDI30 axial • Directional logic for up to 6 driven tools • Driven tools: max. 4 kW / max. 16 Nm • Driven tools speed: 0–5000 rpmTailstock • Programmable, hydraulically actuated • Max. clamping force: 6000 N • Morse taper: MK4 • Hollow clamping cylinder incl. draw tubeControl & software • SINUMERIK 828D OPERATE • SHOPTURN dialog programming • USB interface • Network / Ethernet • 10.4" TFT color monitor • 3D simulationMedia & machine features • Machine light • Coolant system incl. pump (3.5 bar) • Hydraulic unit • Chip conveyor interface • CE certificate • DocumentationTool measurement (E45) • Measuring arm fixed in the work area • Tool measurement on the turret • Short setup times / precise measurement / cost-efficientWorkpiece clamping • 3-jaw chuck KK5 • Max. speed: 6300 rpm Pgodpfx Asyffgrsf Ijg • Diameter: 20 mm • Soft + hard jawsOther (machine-related) • Water gun • Air to spindle • Oil/coolant separator • Automatic coolant monitoring • Electronic handwheel • Tool change guard • Hydraulic connections • Pneumatic connections • Machine packaging: pallet + roll-up cover Additional equipment Bar feeder / magazine (SL1200 – as referenced) • Bar length: 850–1200 mm • Bar diameter: Ø 8–95 mm • Max. feed rate: 60 m/min • Bar change: approx. 3 s • Magazine change: approx. 15 s • Material support area: 550 × 1210 mm • Material capacity: 10 × Ø 55 mm • Operating side: right • Power supply: 240 V DC/DC • Air supply: 6 bar • Dimensions: 1700 × 1250 × 1090–1380 mm • Weight: approx. 500 kg • Safety device: CE • High-speed function • DocumentationSpindle extension (for bar feeder use) • E45 / MT45 / HT45 → DM45 • For 45 mm spindle • Short bars up to 1100 mm • With reducing sleeves (3 pieces) • Required for use with SL1200Chip conveyor • Hinged belt conveyor • Discharge height: 1200 mmHigh-pressure coolant unit • 14 bar / 50 Hz • Additional high-pressure pump • For tools with internal coolant • Interface & softwareRobot interface • PROFI-NET interface • 24 V signals • Safety release • Automatic/manual operation switchingAdditional components • PC keyboard USB (QWERTY) • Machine status LED: Green (Automatic), Red (Alarm), White (Material handling)Installation & mounting hardware • 4× vibration absorbers • 4× mounting brackets • 4× heavy-duty anchorsParts collection device • Pneumatically operated • Max. part length: 120 mm • Max. diameter: 45 mm (51 mm) • Max. weight: 2 kg • Collection box / conveyor belt

Condition: used, Year of construction: 2005, operating hours: 60,683 h, functionality: fully functional, turning length: 1,524 mm, turning diameter: 820 mm, spindle speed (min.): 3,300 rpm, spindle bore: 104 mm, travel distance X-axis: 870 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 1,598 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, Equipment: rotational speed infinitely variable, MAZAK CNC Turning Machine MODEL: INTEGREX e-500 HS /U1500 with Mazatrol 640M PRO Control for sale. The machine is in good condition and can be inspected under power on site. The machine maintenance can be documented. In 2025, the X and Y axes were replaced. The milling spindle and gearbox were replaced in 2024. Technical Data - Max. swing diameter: 820 mm - Max. turning diameter: 820 mm - Max. turning length: 1524 mm Main spindle: - Speed range: 0-3300 rpm - Drive power: 30 kW / 22 kW - Max. torque: 588 Nm - Spindle nose: A2-11" - Spindle bore: 104 mm - Indexing: 0.0001 Sub spindle: - Speed: 0-3300 rpm - Drive power: 30 kW / 22 kW - Max. torque: 588 Nm - Spindle nose: A2-11" - Indexing: 0.0001 Milling spindle: - Drive power: 37 kW - Max. torque: 260 Nm - Speed range: 0-10,000 rpm - Tool holder: SK50 Tool magazine: - Number of tool pockets: 120 Travel: - X: 870 mm - Z: 1598 mm - Z2: 2458 mm - Y: 500 mm - B axis: -30 to 210°, 0.0001° Feed rate: - X/Y/Z: 40 mm/min Machine data: - Connected load: 104 kVA Pjdpfex Syldsx Af Iegg - Operating voltage: 400V / 50 Hz - Required footprint (L x W): 7 x 3.5 m Special accessories: - 120-position tool magazine - High-pressure coolant 70 bar - Renishaw - Laser measurement system for rotating tools - Interface set - Air/water through-spindle cooling - Overload monitoring system - Mayfran Consep 2000 chip conveyor - SMW quick-change chuck

Condition: ready for operation (used), Year of construction: 2018, operating hours: 12,971 h, spindle speed (max.): 18,000 rpm, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, number of axes: 5, This 5-axis POSmill H 800 U was manufactured in 2018. It features a 670x830x600 mm travel range, a swivel range of -120 to 120 degrees, and a continuous 360-degree rotary table. Equipped with an 18,000 rpm milling spindle, 96-position tool changer, and Heidenhain iTNC530 control, this universal machining centre is ideal for complex machining tasks. Consider the opportunity to buy this POSmill H 800 U universal machining centre. Contact us for more information about this machine. • Swivel range (B): -120° to +120° • Rotary table (C): 360° continuous • Tool changer: 96 positions, HSK-A63, rear-mounted with display • Measuring systems: Heidenhain linear scales (X/Y/Z) with purge air; Heidenhain rotary measuring system • POS kinematic module incl. reference ball • POS contour protection • Control cabinet cooling: active air-to-air • Spindle cooler: controlled • Oil cooling for 4th/5th axes: controlled • Network and USB connections • Automatically controlled crane loading hatch • Coolant pump at the head via M-functions • Tool change safety door • Table media interfaces: 3 hydraulic connections and 1 air connection in the table center • Mobile electronic handwheel • Operating hours: 22,996 total; 12,971 program runtime Additional equipment • External chip agitator / swarf (chip) conveyor • Chip removal device with dedicated pump • Water gun (washdown) • Air at the spindle • Electromechanical oil/coolant separator • Automatic coolant level monitoring • Operating status indicator light (stack light) • Hydraulic power unit, incl. control via M-function Pjdpfx Afoydpp Us Iogg Technical Specification Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 900 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 600 mm, overall weight: 2,947 kg, number of axes: 3, This 3-axis Mitutoyo Crysta-Apex S9166 was manufactured in 2018. It features a comprehensive measuring range with X-axis at 900 mm, Y-axis at 1600 mm, and Z-axis at 600 mm. Equipped with CNC control and MCOSMOS-3 CNC V4 software, it includes a Renishaw PH10MQP R2 indexing probe head and SP25M scanning probe system. Additional equipment includes eco-fix CMM fixturing systems and a high-capacity CEE power cable. Consider the opportunity to buy this Mitutoyo Crysta-Apex S9166 CMM machine. Contact us for more information. • Control & software: CNC control; MCOSMOS-3 CNC V4 • Probe system: Renishaw PH10MQP R2 indexing probe head; SP25M scanning probe system; multiple stylus holders (SH25-2); starter probe kit (M3); ceramic calibration sphere Ø20 mm (with factory certificate) • Option: Gear measurement option purchased in 2021 • Condition/usage: Machine was in the quality control room for final inspection • Mounting plates: All aluminum mounting plates installed on the measuring machine Additional equipment • Workstation (PC, keyboard, mouse) • 2× HP 23" monitors (1920 × 1080) • USB dongle / Wibu-Box license • eco-fix CMM fixturing system (kits S and L) • Quick-rail base kit • J/S Box-M Type A • High-capacity CEE power cable Pgedpeydm Hkofx Af Iog • 30 additional individual aluminum mounting plates

Year of construction: 2010, condition: ready for operation (used), This MH 4ZHP was manufactured in 2010. It features a continuous furnace, cooling system, and a conveyor system with an accumulation section. Key specifications include a passage width of 650 mm, passage height of 1100 mm, and a total system length of 11.53 m. Ideal for operations requiring extensive heating and cooling processes. Contact us for more information about this machine. • Passage width: 650 mm • Passage height: 1100 mm • Coil length: 4500 mm • Overall length: 5850 mm • Heating capacity: 96 kW • Heating zones: 4Cooling zone • Length: 1500 mm • Max. pipe length: 1500 mm • Overall length: 1500 mmDimensions and weights • Frost length: 6.05 m • Frost width: 1.70 m • Frost height: 2.60 m • Frost weight: 2.4 t • System length: 11.53 m • System width: 3.81 m • System height: 2.55 m • System weight: 3.2 tUtilities and emissions • Pneumatic supply: operating pressure 6 bar, dry, oil-free • Water supply: 3 bar • Power supply: 230/400 volts, 50 Hz, 120 kW • Noise emission: < 70 dB(A) Additional equipment • Cooling system (cooling unit) • Conveyor system (accumulation section) Pedpox D H H Nefx Af Iogg • Cooling water collection tank with level monitoring • Tool carrier

Condition: used, mileage: 32 km, power: 100 kW (135.96 HP), first registration: 08/2025, fuel type: diesel, overall weight: 2,825 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total width: 2,275 mm, total height: 1,983 mm, loading space length: 2,602 mm, loading space width: 1,392 mm, loading space height: 1,433 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal number: 56414---- Subject to errors and prior sale! SPECIAL EQUIPMENT * Airbag (passenger side) * Trailer hitch, preparation set - cable harness, 13-pin socket and trailer module for retrofitting a trailer hitch * Electrically adjustable, heated and foldable exterior mirrors - with integrated indicators * All-season tires (suitable for winter use) * Heated rear window, fixed - interior mirror - partition wall with window * Rear window wiper including windshield washer nozzle and automatic activation when reverse gear is engaged * Automatic air conditioning at the front - with recirculation heating - with R-1234yf coolant * Cargo area protection package: High side wall paneling - "Easy Clean" vinyl floor paneling for the cargo area - Extra bright cargo area lighting (LED) * Seat package 11A: Driver's seat manually adjustable in 4 ways - Passenger double seat with through-loading flap, fixed - Lumbar support for driver - Plus Style fabric cover, seat center panel in Black Onyx, rest in Ebony * Socket: 12-volt connection in the cargo area (D-pillar) ADDITIONAL EQUIPMENT * 2-stage unlocking for passenger compartment and cargo area (rear door flaps or rear swing door) * Driver's side airbag * Anti-lock braking system with electronic brake force distribution * Plastic exterior mirror housing, black-gray * Battery: H7 AGM single battery * On-board computer with consumption and mileage information (e.g. B. remaining range) and outside temperature display * Roof console Podpjyfktqsfx Af Iogg * Double-wing rear door with 180° opening angle (without window) * ESP - hill start assist - safety brake assist - traction control * Electric front windows * Electronic parking brake * Ford Power start function (keyless starting) * FordPass Connect - including live traffic information and WiFi hotspot (up to 5G/LTE, for up to 10 mobile devices) * Heated windshield * Floor mats: rubber floor mats at the front * Grab handle, driver and passenger side * Glove compartment with lid * Interior lighting at the front with delay circuit * 55 l fuel tank * Plastic steering wheel * Small center console * Emergency call assistant eCall * Package: Technology package 1 (basic) - Ford audio system with Ford SYNC 4 - Pre-Collision Assist, camera-based - Fatigue warning system - Traffic sign recognition system - Wrong-way driver warning function - Lane assistant including lane keeping assistant - Rear parking pilot system - Cruise control system - Intelligent speed limiter with speed limit display * Particle filter: Diesel particulate filter * Radio: Ford audio system with 13-inch multifunction display and Ford SYNC 4 - DAB/DAB+ - FordPass Connect including live traffic information and WiFi hotspot 5G modem - 13-inch TFT multifunction display - Integrated control panel and audio remote control on the steering wheel - Ford SYNC 4 with AppLink and touchscreen - AppLink - Amazon Alexa Built-in voice assistant * Radio accessories: 4 speakers * Wheel hub covers * Tire repair kit * Tire pressure monitoring system * Wheels: Steel wheels 6.5 J x 16 * Windshield wipers with rain sensor * Headlights with LED low beam - including high beam assistant * Sliding door on the right * Mud flaps at the rear * Mud flaps at the front * Power steering * Seat belts - Seat belt tensioners and belt force limiters at the front - Warning system for unfastened driver's seat belt * Start-stop system * Front and rear bumpers in black * Partition (metal) without window * Plastic door handles, black-grey * Door h