Used Monoblock for sale (246)

Condition: used, Year of construction: 1992, Overview This O+H / KHS Hansacan can filler, blocked with a Ferrum can seamer, is a rotary can filling and seaming monoblock for beverage cans. Filler and seamer are joined as a single unit, so cans run from filling straight through to seaming in one continuous flow. The block is set up for standard 330 ml cans (can type 211 / 202) and reaches a rated output of approximately 20,000 cans per hour, depending on product and filling temperature. The block was previously in production in a commercial brewery filling 330 ml cans and is currently at the workshop undergoing a complete reconditioning before delivery. Filling parameters and production data are managed via a Siemens SIMATIC touch HMI, with machine control on a Siemens S7 PLC. Technical data - Manufacturer: O+H / KHS - Model: Hansacan can filler - Seamer: Ferrum can seamer, F 505 G - Year of manufacture: filler 1992, seamer 2010 - Machine type: rotary can filler and seamer monoblock - Filling valves: approx. 30 (type Hansacan) - Seaming heads: 5 - Capacity: approx. 20,000 cph at 0.33 L (product- and temperature-dependent) - Can format: 330 ml standard cans, can type 211 / 202 - Products: beer, carbonated beverages - Control: Siemens S7 PLC with Siemens SIMATIC touch HMI Equipment - Filler and seamer supplied as one blocked unit - New electrical panel with Siemens S7 PLC and SIMATIC touch HMI (reconditioning scope) - New pneumatic panel with renewed pneumatic valves (reconditioning scope) - Beer regulating valve ahead of the beer inlet, CIP tulips and CO₂ injection before seaming - Set up for can type 211 / 202, 330 ml - Manuals, spare-part list and electrical documentation for filler and seamer (provided with the machine) - CE declaration to be issued on completion of reconditioning Condition Csdpfxjzlqu Hj Aktori Used - currently undergoing a complete reconditioning at the workshop and to be delivered fully overhauled, supplied as a blocked filler and seamer unit. The reconditioning scope and the CE declaration are committed as part of the sale and are not yet complete. The block was previously in production in a commercial brewery filling 330 ml cans. Availability On request, after completion of the reconditioning. Location and firm delivery date on request.

Condition: used, Year of construction: 1999, Used filling monoblock SICMEA Cometa 12/5 4500 bph The used filling monoblock SICMEA Cometa 12/5 4500 bph provides a technical solution for filling oil into PET containers. Since Sicmea manufactured this model in 1999 , it ensures a production capacity of 4500 bottles per hour while designing it for packaging formats of 2 L and 5 L. Consequently, it remains a reliable option for industrial bottling lines. Technical features of the Used filling monoblock SICMEA The SICMEA Cometa 12/5 4500 bph uses a volumetric filling system, which ensures precise dosing regardless of the product’s viscosity. Additionally, the monoblock integrates 12 filling valves, and each valve features a fixed nozzle, which guarantees a uniform flow throughout the entire filling cycle. As a result, the machine provides good consistency. Moreover, the capping system handles plastic screw caps efficiently. The 12 capping heads operate in sync with the filling process, ensuring high production efficiency and a hermetic seal for the container. Furthermore, this setup minimizes product wastage while maintaining precision. The machine follows a clockwise operating cycle, thereby optimizing the arrangement of mechanical components to maintain continuous and uninterrupted operation. Similarly, its structural design enhances workflow efficiency. Power supply and electrical data The SICMEA Cometa 12/5 4500 bph filling monoblock operates with a power supply of 380V, 5 kW, and 50 Hz. These parameters make it compatible with major industrial production lines. Consequently, it ensures operational stability and optimizes energy consumption. Additionally, its electrical system supports high-efficiency performance. Safety and compliance The system includes safety devices that protect the operator and ensure compliance with current regulations. In particular, mechanical guards and emergency stop sensors minimize the risk of accidents and maintain a safe working environment. Moreover, its safety mechanisms improve workplace efficiency while reducing downtime. Applications and compatibility The SICMEA Cometa 12/5 4500 bph efficiently fills oil into PET containers, ensuring a precise and reliable bottling process. In addition, its compatibility with 2 L and 5 L formats allows manufacturers to manage production flexibly and adapt to various market needs. As a result, businesses benefit from increased versatility. With a capacity of 4500 bottles per hour, this monoblock supports high-volume production. Furthermore, it allows easy integration into existing bottling lines. Since its design enhances automation, it streamlines production processes effectively. Conclusion of the Used filling monoblock SICMEA The used filling monoblock SICMEA Cometa 12/5 4500 bph delivers a technical solution for volumetric oil filling in PET containers. Thanks to its optimized design, robust structure, and fully automated configuration, it ensures high production performance. Additionally, the integrated safety systems and efficient operation make this monoblock a reliable option for companies that require a high-performance system that meets industrial standards. Ultimately, this machine represents an effective solution for large-scale oil bottling operations. Cjdpfx Akjv Nyzbetori  

Condition: used, Year of construction: 2013, operating hours: 1,700 h, machine/vehicle number: M292, Used Filling Monoblock Alfatek for olive oil 1500 bph General Features of the Used Filling Monoblock Alfatek for Olive Oil 1500 BPH The ALFATEK MBV 9/1 VOLUMETRICA SABRY filling monoblock, built in 2013, offers an efficient and reliable solution for bottling edible oil. It operates at a speed of 1500 bottles per hour, with clockwise rotation and a fully automated workflow. In fact, the machine currently runs in active production, having completed approximately 1700 operating hours. Moreover, it includes all safety protections, user manuals. Container Compatibility and Supported Formats The Used Filling Monoblock Alfatek for Olive Oil 1500 BPH handles a wide variety of containers. Specifically, it works with both PET bottles and metal cans, supporting the following formats: PET 138x138xh253 mm Cjdpfx Aswiu Rvskteri PET 148x148xh320 mm PET 81x81xh236 mm PET 63x63xh184 mm Cans 150x92xh192 mm Cans 150x92xh261 mm Cans 149x120xh315 mm Consequently, the machine adapts easily to diverse packaging needs. Whether the production involves small household bottles or larger industrial formats, this monoblock provides the required flexibility. Additionally, this versatility reduces the need for multiple machines, optimizing both space and investment. Filling Section: Volumetric Technology The filling section of the Used Filling Monoblock Alfatek for Olive Oil 1500 BPH uses 9 volumetric valves. These valves deliver accurate and repeatable dosing, which is especially important for high-viscosity products like olive oil. Notably, the system uses fixed valves and operates in a non-isobaric configuration. Therefore, it suits still liquids and avoids the complexities associated with pressurized systems. Furthermore, the volumetric method helps maintain product integrity while minimizing waste and overfill. Press-On Capping: Compatibility and Sizes The machine applies plastic press-on caps using one capping head, which supports multiple cap dimensions: Ø51.5 x 23 mm Ø37.5 x 22 mm

Condition: ready for operation (used), Year of construction: 2011, operating hours: 12,946 h, functionality: fully functional, travel distance X-axis: 935 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, controller model: Heidenhain iTNC 530 HSCI, spindle speed (max.): 15,000 rpm, No minimum price – guaranteed sale to the highest bidder! Cjdpfxszwn Eto Aktjri TECHNICAL DETAILS Travel range X-axis: 935 mm Travel range Y-axis: 850 mm Travel range Z-axis: 650 mm Number of axes: 3 Table length: 1,200 mm Table width: 850 mm Max. table load: 2,000 kg Spindle connection: HSK-A63 Spindle speed: 15,000 rpm Tool changer: 30-position Rapid traverse: 40 m/min Feed rate: 40,000 mm/min MACHINE DETAILS Control system: Heidenhain iTNC 530 HSCI Internal cooling: 40 bar / 23 liters/min Operating hours: 36,420 h Spindle hours: 12,946 h EQUIPMENT Chip conveyor

Condition: used, Year of construction: 2023, machine/vehicle number: CA73, Used capsuling machine Robino & Galandrino Minibloc year 2023 – 3000 bphThe used capsuling machine Robino & Galandrino Minibloc year 2003 – 3000 bph offers a compact and versatile solution for automatically applying capsules to bottles of still and sparkling wine. As a result, this machine suits diverse production environments. Robino & Galandrino designed this monoblock machine to meet different production needs while ensuring high operational efficiency and consistent product quality.Structure and mechanical configurationRobino & Galandrino configured this machine as a Minibloc automatic capsuling monoblock. Specifically, the design includes two operational heads, each performing specific stages of the capsuling process. The infeed screw aligns and guides the bottles precisely into the processing area. In this way, the machine ensures accurate bottle positioning throughout the cycle.Performance based on capsule typeThe used capsuling machine Robino & Galandrino Minibloc year 2003 – 3000 bph delivers specific output levels based on the capsule type. For instance, it distributes and spins polylaminate capsules on still wine bottles at speeds of up to 1200 bottles per hour. It heat-shrinks PVC capsules onto still wine bottles at up to 3000 bottles per hour. It forms four folds and smooths sparkling wine caps (capsuloni) at speeds of up to 2000 bottles per hour. Moreover, each process maintains excellent consistency and minimal deviation. Crodpfs Ady Evex Aktei Therefore, it can satisfy various technical bottling standards across the wine sector.Capsule feeding systemThe machine uses a horizontal capsule magazine with a motorized belt that feeds capsules into the distributor. Notably, it holds around 1200 capsuloni or 1800 standard wine capsules, allowing operators to run longer production cycles without frequent reloads. Consequently, this reduces machine downtime and improves overall line efficiency. Additionally, the feeding system ensures steady capsule flow under different operating speeds. Thus, it contributes to the machine’s stability and reliability.Distributor and synchronization mechanismsThe single-bell distributor performs a 90-degree angular movement to release the capsules. At the same time, a mechanical needle system separates the capsules before distribution to prevent jams and ensure a continuous process. Furthermore, the encoder actively manages the synchronization of all functions and adjusts them in real time. Thanks to this, the system can react dynamically to changes in bottle flow and capsule format. In contrast to older systems, this configuration minimizes manual calibration.Format compatibility and flexibilityThe machine processes bottles in three formats: 0.375 liters, 0.75 liters, and 1.5 liters. Accordingly, operators can use it across different bottling lines and product ranges. In fact, the used capsuling machine Robino & Galandrino Minibloc year 2003 – 3000 bph adapts well to the needs of small and medium-sized wineries that require flexible equipment.Operational conclusionsTechnicians appreciate the used capsuling machine Robino & Galandrino Minibloc year 2003 – 3000 bph for its solid mechanics and well-optimized capsuling system. In particular, the dual-head structure and encoder-based adjustments enable precise operation and quick format changes. Moreover, i...

Condition: used, Year of construction: 2012, GENERAL FEATURES: CNC machining center with a fixed machine table and a moving tool carrier in a portal design for drilling and milling operations on panels made of various materials (chipboard, MDF, solid wood, plastic, etc.). MACHINE STRUCTURE: The base structure is a monolithic design made of thick-walled material, reinforced by welded-in parts across the entire machine bed, making it extremely stable. The table design, with a large base, ensures long-lasting precision and stability. The machine layout allows the user an optimal workflow despite a minimum of space. The mobile portal carrier is made from a solid monoblock. It is positioned in the X-direction on prismatic, ground guides using ball screw slides. On this mobile tool carrier, the working unit is in turn attached to prismatic, ground guides and the ball screw slide. Axis movement is achieved using "brushless" motors in the X/Y/Z axes. The drive system operates in the X-axis via a pre-tensioned precision rack and pinion drive, and in the Y/Z axes via ground ball screws of the highest precision class. AXIS MOVEMENT: The movement of all axes takes place on prism linear guides with a large cross-section and ball screw shoes with a large contact surface, which ensure optimal sliding even at the highest speeds and accelerations. The precise and rapid positioning of the moving portal (X-axis) is achieved by a pinion and rack with helical teeth. Ball screws with a large cross-section ensure the accurate positioning of the working unit along the moving portal (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. STANDARD MACHINE DESIGN: Milling spindle with 5-axis positioning, 11kW (15HP), HSK63, 1200-20000 RPM. The machining unit consists of a powerful 11 kW (15 HP) motor, which is liquid-cooled and capable of 5-axis positioning. This feature enables machining operations to be performed with a tool that can be oriented in any direction; therefore, fewer angular movements are required. The base structure of the milling unit is based on a design with two non-orthogonal axes that intersect next to the tool. This feature guarantees a robust carrier for heavy-duty milling applications. Thanks to the non-orthogonal axes, it is possible to perform numerous repositionings without using too much space. This allows the machining of complex geometries without the risk of collision with the workpiece and achieves an angle of -10° in relation to the machine table. All machining operations are facilitated by the small dimensions of the group in relation to the rotation axis of the spindle: when the group is in a horizontal position, the dimension is only 35mm. WORK TABLE TV: The work table is designed to guarantee the operator maximum "freedom of movement." The vacuum quick-change clamping system provides maximum flexibility with precise positioning and optimal work piece holding. The table consists of moving consoles that are adjusted in the X-axis on ground guides with ball screw shoes and a special profile to ensure Credpozrvvvefx Aktei

Condition: used, Year of construction: 1997, machine/vehicle number: M304, Krones PET Block 54/8 Monobloc Filler–Capper – OverviewThe Krones PET Block 54/8 is a second‑hand monobloc composed of a rotary isobaric filler and rotary screw capper for PET bottles. Engineered for beverage production and industrial packaging, this unit is ideal for integrating into a used bottling line requiring counter‑pressure filling and PCO 1881 closure application. With 54 fixed filling valves and an 8‑head capper, it delivers reliable performance on large PET formats with precise neck handling.Technical Specifications & Performance DataConfiguration: Monobloc Filler–Capper (filler + capper; no rinser module)Filling technology: Isobaric, fixed-valve counter‑pressureNumber of filling valves: 54Valve pitch (center distance): 126 mmCapper: 8-head rotary screw capper for plastic closuresNeck finish: PCO 1881 (short finish) – plastic screw capsBottle materials: PETNominal capacities: 1.5 L = 9,000–10,000 bph; 3.0 L = 7,000–8,000 bphMachine rotation: ClockwiseOverall dimensions: L 3.8 m, W 3.2 m, H 2.65 mApprox. weight: 7,500 kgReference: M304Module DetailsFiller carousel: 54 valves, designed for carbonated beverages and counter‑pressure operation; suitable for still beverages with inerting depending on product setup.Capper turret: 8 capping heads optimized for PCO 1881 plastic screw caps; consistent application torque and bottle neck handling for PET containers.Advanced Automation & Control SystemsPLC platform: Siemens S7 for process control, diagnostics and integration.Signal and I/O: Provision for standard digital signals to synchronize with upstream/downstream equipment on a used bottling line.Process control: Counter‑pressure phases managed via PLC for stable fill levels and CO₂ retention.Production Line Integration CapabilitiesLine compatibility: Ideal for beverage production environments seeking to upgrade or expand a second hand industrial packaging line.Upstream equipment: Can interface with external bottle rinsers or blow molding machines (not included).Downstream equipment: Compatible with conveyors, labellers, packers and palletizers.Handling system: PET neck handling for stable transfer between filler and capper.Machine Condition & Maintenance HistoryStatus: In storage; filler dismantled and stored.Operating readiness: Operating after scheduled service/maintenance.Power: Not connected.Operating hours: Not set.Typical availability: Unit can be prepared for dispatch after service with a standard lead time.Operational Performance & VersatilityProcess benefits: Isobaric fixed-valve design supports low-foam filling, minimized oxygen pickup and consistent fill volumes on large PET formats.Format range: Optimized for 1.5 L and 3.0 L bottles; additional formats possible subject to parts and changeover kits.Closure system: Reliable application of PCO 1881 screw caps for CSD, sparkling water and other carbonated beverages.Installati... Cjdpfx Akoyhcgbotsri

Condition: good (used), Code: 0507 Brand: SCM MINIMAX - ITALY Model: CU 350 K - CE Standard Universal 5 works combined machine for joinery workshops, craftspeople, furniture makers, bespoke furnishings, doors, wooden joinery, DIY, panels and various applications – CE Standard Technical data: Crsdpfxj Afwxls Aktoi Base consisting of a single, fully welded steel monoblock Cast iron worktable Wide worktable surface area Three-phase motors V 380/50 Hp 3 each Surface planer: Working width 350 mm Total length of tables 1800 mm N° 3 blades Anodised aluminium guide adjustable from 90° to 45° Thickness planer: Table dimensions 600 x 350 mm Max/min working height 230/3 mm Max removal depth 5 mm Spindle moulder: Spindle length 136 mm Max rotational speed 8000 rpm Max tool diameter extending below the table 180 mm Circular saw: Carriage made of anodised extruded aluminium with a sliding system on steel guides Carriage stroke 1500 mm Max blade diameter 300 mm Blade tilting 90°–45° Cutting width at parallel guide 900 mm Squaring frame complete with guide, stops and a guide adjustable in both directions from 90° to 45° for angled cuts on panels Workpiece clamping presser N° 3 suction inlets diameter 120 mm Overall dimensions of assembled machine mm 2000 x 2400 x 1100 h Transport dimensions mm 2000 x 1400 x 1200 h Weight kg 600

Condition: used, Year of construction: 2016, machine/vehicle number: LC528, Technical Specifications & Performance DataComplete 2016 glass beer line built around a GAI monoblock and Enos labeler, in ready for operation condition. Throughput up to 900 bottles/hour across 0.33 L, 0.50 L, 0.70 L formats with isobaric counter-pressure filling for carbonated beer. This unit is delivered as second-hand used beer bottling equipment with documented components and safety features.Manufacturer: GAI (filling monoblock), Enos (labeling)Production speed: up to 900 bottles/hourFilling technology: Isobaric counter-pressure, with double pre-evacuation system.Container types: Glass bottlesBottle formats: 0.33 L, 0.50 L, 0.70 LProduct types: Beer (configured for carbonated products)Line components: GAI rinsing–filling–capping monoblock with crown capper; Enos labeling systemCondition: READY FOR OPERATIONDocumentation: Manuals availableSafety: Guarding and interlocks consistent with modern linesManufacturerModelYearMachine typeNotesGAIMLE441-BIER-0032016Filling MonoblockConfigured for crown capEnosSIRIAM2016Labeling MachineAdvanced Automation & Control SystemsThe line employs centralized controls to streamline operation and changeovers. The GAI monoblock regulates isobaric parameters to limit oxygen pickup and foam, maintaining consistent fill levels on all listed formats. An operator-friendly HMI bottling station provides status, alarms, and access to format recipes where configured.Control interface: HMI with status indications and alarmsAutomation: PLC-based logic; recipe-led parameters when enabledProcess control: Counter-pressure setpoints tailored to beer carbonationSafety features: Interlocked guards, emergency stops, standard protectionsElectrical: Standard industrial power supply (to be confirmed during site survey)Production Line Integration CapabilitiesDesigned to interface with common upstream and downstream modules, this beer bottling machinery connects to depalletizers, conveyors, date coders, inspection, and case packing. The Enos SIRI... Crsdpfxe Adywls Aktei

Condition: used, Year of construction: 2013, operating hours: 11,082 h, Boom type: Monoblock boom Fueling pump: Yes Ground plate width in mm: 500 Service weight: 72400 Emission class: Emission class 3A EPA certification: Yes Complete cab protection: Yes Air conditioning: Yes Stick length: 2600 Machine width in mm: 4200 Engine: Liebherr D 9508 Bulletproof glass: Yes Rear view monitoring with camera: Yes Codozx Ntuspfx Akteri Additional extras: Cab height increase of 800 mm, lifting cylinder with piston rod Central lubrication system: Yes Condition of left track in %: 90 Condition of right track in %: 90 Condition of track roller in %: 80 Condition of undercarriage in %: 90 Condition of idler in %: 80 Visual condition: clearly used - 4 Condition of support wheel in %: 50 Technical condition: Requires repair - 4 Condition of turret in %: 90 ---- Air conditioning Machine width: 4200 mm Cab height increase: 800 mm Transport height 3700 mm with removed cab and stick

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: 399, functionality: fully functional, Equipment: documentation/manual, Thibaut multifunction machine for processing natural stone Monoblock design (no foundation required) Spindle speed: 250 - 10,000 rpm Automatic vertical oscillation Vertical motorised fine adjustment of the spindle Tool holder: SK 40 Pneumatic contact pressure 300 mm spindle height adjustment Crsdpfx Akey Iu Ixstji 100 mm pneumatic height adjustment X-axis travel: 3,400 mm Worktable with tilting adjustment Worktable size: 3,000 mm x 970 mm Articulated arm locking system Marble grinding plate (receptacle 3 x Frankfurt type) Includes tools and arbors

Condition: used, Year of construction: 2001, machine/vehicle number: M346, Used MBF Synchrofil LV filling monoblock 7000 BPHTechnical Specifications & Performance DataThis MBF filling monoblock delivers reliable performance for beverage production within a used bottling line or as a standalone station in industrial packaging environments. Built for hot and cold filling processes, it provides steady output and quality control for second hand bottling operations seeking dependable equipment.Manufacturer: MBFModel code: LV 1200-35 / 240-4VYear of manufacture: 2001Production speed: 7000 bphFiller configuration: 35 valvesFilling technology: Gravity with light vacuum (low vacuum)Capping: alluminio MCA 28x15 mmRotation direction: ClockwiseWorked formats: Compatible with 0.5L and 1.0L bottle formatsDesigned for bottle handling: Cylindrical containersElectrical supply: 380 V, 50 HzCompressed air consumption: 200 Nl/min at 0.6 MPaMachine weight: 4000 kgSafety features: Integrated protections and guardsDocumentation: Manuals and maintenance documentation availableDimension: Width x Height x Depth: 3.40 m x 2.60 m x 2.30 mAdvanced Automation & Control SystemsThe monoblock is engineered for consistent operation and straightforward control within beverage production. Safety circuits, interlocked guards, and emergency stops support safe operation. Format changeovers between 0.5L and 1.0L are supported with dedicated change parts and adjustments suited to gravity/light vacuum filling. The electrical configuration at 380 V and 50 Hz aligns with common industrial standards for packaging machinery, facilitating integration into existing control architectures and line PLC/HMI systems.Production Line Integration CapabilitiesThis filling monoblock integrates seamlessly into a complete used bottling line, upstream of capping and downstream of rinsing or bottle preparation equipment. It can operate as part of a larger bottling equipment layout with conveyors, labelers, and secondary packaging machines, supporting industrial packaging requirements for a wide range of beverage production scenarios.Inline or standalone operationCompatible with standard conveyor systemsFormat flexibility for 0.5L and 1.0L bottlesSuitable for hot and cold filling applicationsMachine Condition & Maintenance HistoryThe machine is currently in production, indicating proven operational status. Manuals and maintenance documentation are available to support installation, operation, and service. Spare parts availability is confirmed, supporting uptime and long-term reliability in second hand bottling operations.Operational Performance & VersatilityThe gravity with light vacuum system provides gentle product handling and stable fill levels, ideal for still beverages and applications benefiting from low vacuum as... Crsdpfxezrgq Dj Aktsi

Condition: used, Year of construction: 2016, machine/vehicle number: LC686, Used automatic beer filling line 1400 BPH on 330ml - Year 2016Technical Specifications & Performance DataThis used bottling line is an automatic beer bottling solution manufactured in 2016 for the processing of 0.33L bottles. The line is designed for a production capacity of 1200–1400 bph and combines rinsing, isobaric filling, crown capping, labeling, coding and bottle conveying in a compact industrial packaging configuration.Production capacity: 1200–1400 bphBottle format: 0.33LBottle Height: Min. H 180mm, Max. H 350mm. Product application: BeerYear of manufacture: 2016Filling monoblock: ISO 9-9-1CStated installed power: 5.5 kW across the labeling machine, filling monoblock and tables/conveyorsAdvanced Automation & Control SystemsThe automatic ISO 9-9-1C triblock integrates a rinsing turret, an isobaric filling turret and a capping turret in one synchronized bottling machine. The rinsing section uses 9 grippers with a single water treatment, while the filling section is equipped with 9 valves and double pre-evacuation for controlled beer filling. The capping section is fitted with an Arol EAGLE/C turret for 26mm twist crown caps.Filling monoblock installed power: 4 kWFilling monoblock compressed-air consumption: 120 NL/min at 6 BARLabeling machine installed power: 0.75 kWLabeling machine compressed-air consumption: 25 NL/min at 3 BARTables and conveyors installed power: 0.75 kWProduction Line Integration CapabilitiesThe line is arranged for inline beer bottling, linking bottle handling, rinsing, filling, closure application, labeling, date or lot coding and conveyor transfer. Its compact configuration is suitable for breweries seeking second hand bottling equipment for 0.33L glass bottle production. The linear adhesive labeling machine applies a front label, back-label and neck label, supporting a complete decorated-bottle presentation before downstream handling.Machine typeManufacturer/modelYearFilling MonoblockISO 9-9-1C / Arol EAGLE/C2016Labeling MachineSIMPLE/3PrinterThermal-transfer printerVarious EquipmentTables and ConveyorsMachine Condition & Maintenance HistoryThe automatic beer bottling line remains installed in its original position and has only been disconnected from production. This status supports efficient inspection, evalu... Cedpfxs Adtxpo Aktsri

Condition: used, Year of construction: 2013, machine/vehicle number: LC685, Used DC GF 3-in-1 filling line, sparking water 6000 BPH, Year 2013Technical Specifications & Performance DataThis used bottling line is configured for PET bottle production and beverage filling, combining a linear blow molding machine, high-pressure compressed-air equipment, an integrated rinsing, filling and capping monoblock, labeling, coding, saturation and shrink-wrapping equipment. The line is designed for industrial packaging of carbonated, oxygenated and non-carbonated beverages.Blow molding capacity: 1,000–2,000 bphFilling monoblock capacity: 4,000–6,000 bph at 0.33LSupported bottle formats: 0.33L, 0.5L and 1.5LContainer material: PET bottles with PCO neck finishComplete line footprint: approximately 11 m × 6 mBlow molder configuration: linear, 2 cavities, 20–50 g preformsFilling monoblock: 18 rinsing stations, 18 filling valves and 6 capping headsAdvanced Automation & Control SystemsThe line includes Mitsubishi PLC control for the filling and handling process. The filling monoblock uses an electronic filling system and operates with clockwise bottle movement. Safety functions are fitted on the blow molding machine, compressor and filling monoblock, while safety covers are included for the complete line.Electrical supply for the blow molder and compressor: 400 V, 15 kW, 50 HzElectrical supply for the filling monoblock: 400 V, 3.5 kW, 50 HzElectronic non-isobaric filling systemPCO 32 and PCO 28 cap compatibilityIntegrated HS-Datu dating unit for production codingProduction Line Integration CapabilitiesThis complete PET bottling line follows a practical process flow from bottle forming through filling, labeling and secondary packaging. The linear blower is supplied with a preform feeder, preform tipper, 30 bar three-stage compressor, cooling dryer and air filter. Downstream equipment includes a self-adhesive labeling machine, vacuum saturator, conveyor system and automatic shrink film wrapper.Machine typeManufacturer / modelYearBlow Molding MachineECENG MACHINERY Co. Ltd.2010CompressorChina2010Filling MonoblockDC GF 3-in-12013SaturatorVacuum saturatorLabeling MachineSelf-adhesive labelerShrink Wrap... Cedo Adyt Tspfx Aktori

Year of construction: 2026, condition: new, Automatic monoblock machine for filling and capping juices, wine, oil and other liquid products in glass or PET bottles. Filling and capping are combined in one compact unit with a production capacity of up to 800 bottles per hour, depending on bottle size and product characteristics. Bottles are fed by a starwheel, filled by five precision filling heads and transferred directly to the capping station. The capping system supports multiple cap types and provides adjustable torque. A No Bottle, No Fill function helps prevent product loss. Features and technical details • Capacity: up to 800 bottles per hour • Five-head filling system • Typical bottle volume range: 250 ml to 2 L • Suitable for different glass and PET bottle shapes and sizes • PLC control with touchscreen interface • Frequency-controlled drive with inverter for smooth speed adjustment • Adjustable cap torque • Suitable for hot or cold filling of fruit juices • Also suitable for wines, spirits, oils and other liquids Crodjz Nd Hiepfx Aktji The machine is manufactured from stainless steel and food-grade materials. Its enclosed stainless-steel frame helps protect the product from external contamination while supporting hygienic and safe operation.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,339 h, travel distance X-axis: 730 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: TNC530, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis DMG DECKEL MAHO DMU 60 monoBlock was manufactured in 2005. It features a chip conveyor and a coolant system, ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 60 monoBlock machine we have for sale. Contact us for more information. Codpfx Aex D Nwkoktsri • Heidenhain TNC530 • 24 tool positions • SK-40 chuck • Spindle speed: 18,000 • measuring probe Technical Specification Through-spindle Coolant Yes Taper Size SK 40

Condition: used, Year of construction: 2004, operating hours: 33,411 h, machine/vehicle number: M308, Aseptic Carton Filling Monoblock CFA406-32 This used SIG Combibloc aseptic carton filling monoblock is engineered for reliable, high-quality filling of fruit juices and still drinks into SIG COMBIBLOC cartons. Built in 2004 and maintained in professional industrial packaging environments, it offers stable performance at 2.0L format with consistent output suitable for beverage production. With a complete set of auxiliary equipment, it integrates smoothly into a used bottling line or second hand industrial packaging setup seeking aseptic carton filling capability. Manufactured by SIG Combibloc, the CFA 406 series is known for precise dosing, hygienic design, and dependable operation in high-demand beverage production. This unit is accompanied by a sterile air system and downstream handling including evacuation and buffer tables, conveyors, and a Combiswift cap applicator, making it a compact solution for carton packaging lines. Technical Specifications & Performance Data Manufacturer: SIG Combibloc Model: CFA406-32 Year: 2004 Packaging/carton: SIG COMBIBLOC Container volume: 2.0L Capacity: 5000 pieces/hour Operating hours: 33411 h Products: fruit juices and still drinks Equipment composition: CFA 406 filler (2004); Sterile air system (2004); Evacuation table (2004); Buffer table (2004); Cap applicator/Combiswift (2002); Tray packer (2004); Conveyors (2004) Last service: 12/2019 Shutdown: 06/2020 Advanced Automation & Control Systems Designed for aseptic operation, the line features a sterile air system to maintain controlled, hygienic conditions in the filling zone. The equipment supports stable, repeatable filling performance suitable for 2.0L carton formats with precise handling through integrated tables and conveyors. Quick format handling within the CFA series allows efficient setup aligned with industrial packaging standards. Production Line Integration Capabilities This aseptic carton filler integrates seamlessly with upstream and downstream packaging machinery. The included evacuation table, buffer table, conveyors, and tray packer streamline product flow and accumulation, supporting smooth line balancing. The Combiswift cap applicator enhances closure application on cartons, enabling comprehensive line functionality for beverage production focused on cartons. Machine Condition & Maintenance History The machine underwent its last service in December 2019 and was shut down in June 2020. It is currently dismantled and stored. During removal, certain components were taken off and are now missing: 9 switches, 3 photocells, and 10 sensor cables. Overall, the unit presents as a well-maintained, second hand aseptic filling solution with documented service and clear storage status. Operational Performance & Versatility Optimized for fruit juices and still drinks, this carton filling monoblock supports consistent 2.0L SIG COMBIBLOC packaging. The integrated cap applicator allows closure application suited to carton systems, while the sterile air module supports aseptic standards for sensitive beverage categories. Its throughput of 5000 piec... Cjde Adt Rfopfx Aktsri

Condition: used, Year of construction: 2011, machine/vehicle number: M327, Used GANGLOFF filling triblock 23000 BPHTechnical Specifications & Performance DataThis rotary Filling Monoblock CX 6/12 is engineered for high-efficiency beverage production and industrial packaging. Manufactured by Gangloff, it integrates precise filling with reliable capping to support demanding used bottling line and second hand equipment projects without compromising quality. Optimized for PET bottles and still water, the machine combines robust construction with a compact rotary footprint and neck-handling transfer for stable container control at high speeds.Manufacturer: GangloffModel: CX 6/12Year of manufacture: 2011Production speed: up to 23000 bottles/hourFiller configuration: 54 valvesCapper configuration: 13 heads (Zalkin)Current bottle format: 1.5LCompatible container material: PETNeck finish: 29/25Transfer type: Neck-handlingMachine type: RotaryWork direction: CounterclockwiseMaximum bottle height: 340 mmOperating pressure: 6 barControl platform: Schneider PLC and HMIAdvanced Automation & Control SystemsThe monoblock is equipped with Schneider PLC and HMI for stable, intuitive operation and simplified diagnostics. Automated sequences manage filling and capping synchronization, while recipe-based adjustments support quick format transitions. The neck-handling architecture reduces mechanical adjustments when switching bottle heights, enhancing uptime and repeatability. Operator interfaces provide clear status visualization and alarms to maintain consistent beverage production quality.Production Line Integration CapabilitiesDesigned for seamless integration in a complete bottling line, the machine can operate inline with upstream rinsing machines and downstream labeling, inspection, and packaging machinery. The neck-handling conveyor interface ensures gentle container transfer, minimizing scuffs and misalignment. Format flexibility centers on PET bottles with 29/25 necks, with the current setup optimized for 1.5L water. The rotary monoblock layout conserves floor space while delivering continuous, stable throughput for industrial packaging applications.Machine Condition & Maintenance HistoryThe unit is ready for operation and has been overhauled. It is supplied with compatible spare parts and includes a 6-month guarantee. Its current configuration supports immediate deployment in beverage production environments, particularly for still water in PET bottles. The maintained condition and recent service provide a reliable starting point for second hand line upgrades or capacity expansions.Operational Performance & VersatilityThis monoblock is ideal for Water production in PET containers. The 54-valve filler delivers uniform fills at high speeds, while the 13-head Zalkin capper ensures precise torque application and consistent sealing for 29/25 neck finishes. Neck-handling transfer enhances stability across tall form... Crsdpfo Adt Nbex Aktoi

Condition: used, Year of construction: 2024, machine/vehicle number: LC648, Used ALFATEK line for soap - 2000 BPHTechnical Specifications & Performance DataThis complete used bottling line integrates a dynamic weight filling monoblock and a linear self-adhesive labeling machine by ALFATEK with a fully electric single-cavity stretch blow molding machine by Meccanoplastica Iberica. Engineered for PET detergent and soap bottles, it delivers reliable performance for industrial packaging and bottle production.Filler Output: 1,500–2,000 bph (reference: 500 ml soap)Labeller Output: up to 2,500 bphBlow Molder Output: 1,000–1,200 bphContainer Formats: 0.1L to 2.5L (examples: 0.1L, 0.5L, 2.5L)Container Type: PET bottlesFiller Bottle Range: height 230–360 mm; diameter 58–110 mm; neck diameter 16–30 mm; neck height 40–75 mm; allowable fill level variation ±30 mmLabeller Type: automatic stainless-steel linear self-adhesive applicationBlow Molder Model: MIPET-1P, 1 cavityBlow Molder Max Container Size: diameter 120 mm; height 350 mmPreform/Neck: inner diameter 18–42 mm; suggested neck 28/410Conveyor Chain: metallic straight chain, 82.5 mmBlow Molder Dimensions (approx.): 2900 × 1600 × 2064 mm; weight 2000 kgAdvanced Automation & Control SystemsThe line combines precise weight-based or mass-flow-controlled filling with robust motion and temperature control for consistent container quality. Operators benefit from clear interfaces and quick adjustments.Filler Control: on-board PLC managing flow meters and all filling operations; dedicated software/hardware for product feed pump controlOperator Interface: English pushbuttons (filler); integrated digital HMI on blow molder for settings and diagnosticsAutomation Platform: Siemens PLC and servomotors on blow molder; Siemens and GEFRAN electricsRemote Support: online modem for remote technical assistanceElectrical Supply (Filler): 380V, 50HzElectrical Supply (Blow Molder): 400 VAC, 50 Hz; installed power 35 kW; average power consumption ~12 kWWorking Plane Height (Filler): 1000 mm ±50 mmConveyor Drive: suspended driving head 0.37 kW with electrical panelProduction Line Integration CapabilitiesDesigned for seamless integration from in-house bottle production to filling and labeling, this second hand line offers efficient handling for detergent applications.Inline Configuration: single-cavity PET blow molding feeding the ALFATEK filler and linear labellerConveyors: tailored conveyor kit with driving/return heads and controls for stable transferFormat Changeover: fast on the filler due to tankless design and no gripper-style handlingLabel Application: self-adhesive label compatibility on cylindrical or shaped PET... Cedo Adtymopfx Aktjri

Condition: used, Year of construction: 2011, machine/vehicle number: M318, Used Mesal Filling triblock 12000 BPH - year 2011Technical Specifications & Performance DataThis is an automatic isobaric filling monoblock engineered for PET bottle handling and optimized for carbonated beverage production. Manufactured by MESAL in 2011, model E30-30-10IA1, it combines rinsing, isobaric filling, and capping in a compact rotary platform suitable for medium-speed beverage production. As a versatile second hand asset for a used bottling line, it provides reliable industrial packaging performance with efficient changeover and robust construction.Manufacturer: MESALModel: E30-30-10IA1Year: 2011Production speed: up to 12,000 bottles/hour (format dependent)Container type: PETBottle format: 0.24L (240 ml)Neck finish: 28 mmFilling technology: Isobaric (for carbonated products)Operating mode: AutomaticElectrical data: 400 V, 60 HzPLC/HMI: Omron controlAdvanced Automation & Control SystemsThe monoblock integrates advanced automation to ensure repeatable filling accuracy and stable carbonation control. The Omron PLC coordinates the rinsing carousel, isobaric filling carousel, and capping turret with synchronized drives. Operator-friendly controls help streamline format changes and reduce setup time.Omron PLC automation for reliable machine coordinationCentralized control of rinse, fill, and cap turretsAutomatic operation with format-dependent parametersIsobaric process control for carbonated beverage handlingInterlocked guards and access doors for safe operationProduction Line Integration CapabilitiesDesigned for seamless integration in a beverage production environment, this monoblock is suitable for embedding into a complete used bottling line or operating as a core station within an industrial packaging system. It can be coupled upstream with depalletizing and air conveyors and downstream with labeling, inspection, packing, and palletizing equipment.Inline integration with conveyors and accumulation systemsCompatible with standard PET handling componentsFlexible for carbonated beverage applicationsOptimized for 0.24L PET; adaptable across similar small-format PETMachine Condition & Maintenance HistoryThis second hand monoblock is presented in ready-for-operation condition, suitable for beverage producers seeking dependable performance. The robust engineering typical of MESAL equipment supports consistent uptime when correctly maintained and commissioned.Ready for operation with standard commissioningIndustrial-grade construction for durabilitySuitable for inclusion in a used bottling line upgradeOperational Performance & VersatilityEngineered for carbonated beverage filling, the isobaric system maintains product CO2 content and fill-level stability. The PET handling components support 28 mm neck finishes, common in CSD applicatio... Credj Adt Nzopfx Aktei

Condition: used, Year of construction: 2008, operating hours: 2,467 h, machine/vehicle number: LC690, Used AMER filling line for still water PET, 5000 BPH, 2 blowersTechnical Specifications & Performance DataThis used bottling line is configured for still water in PET bottles and combines bottle production, conveying, rinsing, filling, capping, labeling and secondary packaging. The line includes two SMF COMBI 400 automatic PET bottle blow molding machines, an AMER rinsing-filling-capping monoblock, a SACMI LABELLING OPERA 200 RF labeling machine and an AMER shrink wrapper.Filling capacity: 4,000–5,000 bph for bottles with 30/25 mm necks.Blowing capacity: up to 4,000 bph on 1.5L bottles through two SMF COMBI 400 blowers.Labeling capacity: 12,000 bph.Shrink-wrapping capacity: 300 packs/h.Bottle range: 0.25L to 2.5L for the blow molding section.Available mold formats: 0.33L, 0.6L, 1.5L and 5.0L, depending on the machine section.Filling monoblock configuration: 16/18/6.Required installed power: 120 kW.Required hall surface: approximately 500 m².Advanced Automation & Control SystemsThe PET bottle blow molding section uses infrared preform heating with 8 segments, 14 lamps and 550 mm heating elements. The SMF COMBI 400 machines operate with a 400 V, 3-phase, 50 Hz supply and have an installed power of 56 kW per machine. The labeling machine operates at 400 V, 50 Hz and is rated at 28 kW and 47 A.The AMER filling monoblock integrates rinsing, filling and capping in a compact process block. It is equipped with a HEPA filter and an integrated CIP aggregate with disinfection, supporting hygienic beverage production and efficient internal cleaning procedures.Production Line Integration CapabilitiesThis complete bottling line is designed as an integrated PET packaging solution for still water production. Preforms are handled by the SMF hopper and supplied to the blow molding machines, while air conveying transfers formed PET bottles toward the filling section. After rinsing, filling and capping, bottles are labeled with OPP foil and transferred to the shrink wrapper for pack formation.Machine typeManufacturer / modelYearBlow Molding MachineSMF Maschinenfabrik GmbH / COMBI 4002009ChillerSMF Maschinenfabrik GmbH / HT-6A2008Filling MonoblockAMER / BLOCK2008Labeling MachineSACMI LABELLING / OPERA 200 RF2008Shrink Wrapper Crsdpfo Adtttsx Aktji

Condition: used, Year of construction: 2014, Overview Complete 10 hl craft brewery around an Eco Brew Tech 10-20 HL steam-heated two-vessel brewhouse from 2014. One package from milling to bottling: malt mill, brewhouse with wort cooling and oxygenation, hot and cold water tanks, steam generator, three 20 hl unitanks, filtration, an atmospheric filler-capper monoblock, a self-adhesive labeller and a microchiller. 10 hl of cast wort per brew at 12.5 °P, up to 4 brews in 24 hours. Technical data - Brew length: 10 hl cast wort at 12.5 °P; 20 hl in 12 hours, up to 4 x 10 hl per 24 hours - Brewhouse: 2 vessels, AISI 304, steam-heated, PLC with touchscreen and recipe memory - Fermentation: 3 x 20 hl unitanks, AISI 304, 0.49 bar - Bottling: 800-1,000 bottles/h, crown cap - Year: 2014 (microchiller 2018) Credsz Sk Aqopfx Aktsi Scope of Delivery - Malt mill | Robix | ROPPI-1100 | two fluted rollers, adjustable and lockable gap, protective magnets, 1,100 kg/h, 4.8 kW, 400 V / 50 Hz - Brewhouse | Eco Brew Tech | 10-20 HL | mash/lauter tun 1,557 L gross with false bottom, grant, sparging and 1.1 kW bidirectional rake with variable speed; kettle/whirlpool 1,890 L gross with tangential inlet and bottom steam jacket; rock wool insulation, platform and stairs | 2014 - Wort pumps | 2 sanitary pumps for hot and cold wort, 2 kW and 3 kW - Water mixing station | hot and mains water, flow meter and in-line thermometer - Plate heat exchanger | AISI 316 plates, NBR gaskets, wort cooling with hot-water recovery - Wort oxygenation | in-line, porous stone, flow control valve, outlet thermometer - Hot water tank | Eco Brew Tech | HWT | 20 hl working (2,869 L gross), steam jacket, PT100 thermostat, 0.75 kW pump 80 L/min, 24 L expansion vessel | 2014 - Cold water tank | Eco Brew Tech | CWT | 20 hl working (2,869 L gross), glycol jacket, PT100 thermostat, 0.75 kW pump 80 L/min | 2014 - Steam generator | Thermindus | GV INSIEME | 150 kg steam/h, diesel burner, feed-water unit and boiler control panel | 2014 - Unitanks, 3 units | Eco Brew Tech | 20 hl working (2,731 L gross) each, AISI 304, 0.49 bar, 2 independent cooling jackets (side and cone), PT100, pressure gauge, safety valve, CIP spray ball | 2014 - Mixing tank | Eco Brew Tech | 2,200 L, AISI 304 | 2014 - Mobile pump on trolley | 1.5 kW, 200 L/min at approx. 15 m, AISI 316 pump, AISI 304 trolley, for CIP and beer transfer - Cartridge filter | AISI 304 housing, up to 2,000 L/h, cartridges not included - Process pump | EP MINI | 0.37 kW, 3/4" connection - Filler-capper monoblock | Idrotecnica | I8C | atmospheric filling, crown capping, 800-1,000 bottles/h | 2014 - Self-adhesive labeller | STS | S2/Z | automatic, 1,000 bottles/h, batch coder | 2014 - Microchiller | Keyter | KWF2009 | process cooling | 2018 Condition Used, still installed. Inspection on site is possible. Availability Immediately. Location: Spain.

Condition: used, NEOS PA Range Ventilated negative temperature refrigeration Temperature range: -20 to -10 °C Power supply: 230 V single-phase 50 Hz Power consumption: 580 / 840 W Refrigerating capacity: 600 W Volume: 486 L Capacity: 20 trays 600 × 400 mm 1 full door with automatic closure Interior: AISI 304 stainless steel Cabinet / door insulation: 75 / 65 mm Adjustable stainless steel legs: 120 to 150 mm Cedpe Agu D Njfx Aktjri Refrigerant: R290 Hot gas defrosting: 4 cycles / 24 h External dimensions (W × D × H): 790 × 820 × 2025 mm Internal dimensions (W × D × H): 640 × 682.5 × 1440 mm Weight: 140 kg The ILSA NEOS PA AN64S2510 negative temperature pastry cabinet is designed to store pastries at temperatures between -20 and -10 °C. Suitable for 600 × 400 mm trays, it combines ventilated refrigeration, a full door, and a gross capacity of 630 L, or 486 L net. What sets this model apart This version features an exterior coating of PPS on steel and an interior of AISI 304 stainless steel. The 20 pairs of stainless steel slides included as standard organize the storage of the trays. The tropicalized monoblock refrigeration unit ensures rear-ducted airflow within the compartment. Key benefits Tiered storage for 600 × 400 mm trays Ventilated refrigeration with rear-ducted airflow Automatic defrosting with hot gas Automatic condensate evaporation Rounded interior corners for easy cleaning Full door with automatic closure and standard lock Adjustable stainless steel legs for leveling

Condition: ready for operation (used), Year of construction: 2022, operating hours: 389 h, spindle speed (max.): 2,800 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 830 mm, spindle motor power: 30,000 W, total height: 1,915 mm, total width: 2,035 mm, overall weight: 5,650 kg, product length (max.): 3,821 mm, number of axes: 3, This 3-axis DOOSAN Puma GT 3100 M was manufactured in 2022. It features a maximum turning diameter of 376 mm and a turning length of 725 mm. The machine is equipped with a 12-station tool turret and a three-jaw power chuck diameter of 305 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma GT 3100 M horizontal turning machine we have for sale. Contact us for further details. • Siemens S828D control touchscreen with ShopTurn 15-inch display • 3-axis CNC horizontal turning machine with driven tools and tailstock • C-axis main spindle: 360° resolution 0.001° • C-axis speed: 200 rpm • C-axis torque: approx. 1162 Nm • Swing diameter over bed: 720 mm • Swing diameter over cross slide: 590 mm • Max turning diameter: 376 mm • Max turning length: 725 mm • Main spindle bore: 115 mm • Bar capacity: 103 mm • Spindle nose: ASA A2-11 • Max torque: approx. 1112 Nm • Rapid traverse X-axis: 24 m/min • Rapid traverse Z-axis: 30 m/min • Feed force X-axis: 9465 N • Feed force Z-axis: 17379 N • Three-jaw power chuck diameter: 305 mm with soft jaws • 12-station tool turret with BMT65P tool holders • Max driven tool speed: 5000 rpm • Driven tool power: approx. 7.7 kW • Driven tool torque: approx. 75 Nm • Tailstock with quill diameter: 100 mm • Quill stroke: 100 mm • Hydraulic clamping system with hollow cylinder • Monoblock cast iron machine bed, Meehanite construction • 30° slant bed design • Hardened and ground guideways with low-friction coating • Automatic central lubrication • Coolant system: 7 bar pressure • Coolant tank capacity: approx. 235 liters • Hydraulic tank: approx. 20 liters • Full enclosure with working area lighting • Bar feeder interface • Oil skimmer • Electronic safety clutch for X and Z axes Cjdpey E I Hisfx Aktsri • Electrical connection: 400 V, 3-phase, 50 Hz • Total power: approx. 47 kVA • Unused (like new) • OPTIONAL: HALTER LoadAssistant Universal Big 70 (Robot) • Gripper for Doosan Universal Big 70 • Rotation Station • Workpiece Support • Base Plate 23 mm / 175 mm Big 70 • Machine Interface Box • () Technical Specification Counter Spindle No Driven Tools Yes

Condition: good (used), Year of construction: 2006, Parts shown by hand not come. Machine is in good working condition. Crjdpfx Aezk U Unsktji