Used Monoblock for sale (246)

Condition: used, Year of construction: 1999, machine/vehicle number: LC693, Used KRONES Sensometic VP-G filling line 12000 BPH for fruit syrup - Year 1999Technical Specifications & Performance DataThis KRONES complete bottling line is configured for filling raspberry syrup, various fruit syrups and special citrus vinegar at a filling temperature of 25 °C. Built in 1999, the line handles glass bottles and PET bottles in three documented formats, combining rinsing, filling, dual capping and cold-glue labeling within an integrated industrial packaging process.Maximum production speed: 12,000 bph with 0.7L glass bottlesProduction speed: 10,000 bph with 1.0L glass bottlesProduction speed: 6,000 bph with 1.5L PET bottlesCompatible formats: 0.7L glass, 1.0L glass and 1.5L PET bottlesElectrical supply: 240/400 V, 50 HzLine direction: left to rightAdvanced Automation & Control SystemsThe bottling equipment is controlled by a Siemens S5 115 U PLC. Electronic valve control is fitted to the three-channel KRONES Variojet rinser, while motorized height adjustment is provided on the filler upper section and on both capping stations. The labeling machine incorporates a horizontal, single-line laser dater for in-line coding.The Prontomatic labeling machine has a full protective enclosure and a lift-up monoblock design, supporting protected operation and access during routine line activities.Production Line Integration CapabilitiesDesigned as a complete used bottling line, this KRONES configuration integrates bottle rinsing, filling, screw capping, snap-on capping and multi-position labeling. Standard feeding, right-angle labeler infeed and transfer-screw container handling support continuous bottle movement through the labeling section. The line is suitable for industrial packaging applications involving syrup and vinegar products in glass and PET containers.Machine typeManufacturer / modelYearRinsing MachineKRONES Variojet 2.520-070-1131999Filling MachineKRONES Sensometic VP-G 050-113/SV 10/SOV 10-S1999Capping MachineAlcoa PP 10 / 360Capping MachineAlcoa K 10 / 360Labeling MachineKRONES Prontomatic 720-12-6-4-1801999PrinterLaser daterMachine Condition & Maintenance HistoryThe line is availa... Crjdpfx Ae Adtqxjk Aei

Condition: used, Year of construction: 2007, Overview Complete wine bottling line with KHS and Krones machines for 0.75 l glass bottles, rated at 12,000 bottles per hour. The line runs from depalletizing, bottle washing and empty bottle inspection through the KHS Innofill NRF filler-closer monoblock (natural cork or aluminium screw caps) to capsuling, labelling, case packing and robotic palletizing. A KHS process area with cartridge filtration and a wine warmer-cooler prepares the wine ahead of the filler. The line is still installed and can be inspected on site. Technical data - Product: still wine - Containers: glass bottles, design bottle 0.75 l - Line output: 12,000 bottles/h - Closures: natural cork, aluminium roll-on screw caps, shrink capsules - Years of manufacture: 2006 - 2023 Scope of Delivery Type | Manufacturer | Model | Description | Year | Listing Bottling line - Glass depalletizer | Krones | PRESSANT UNIVERSAL 1N | sweep-off depalletizer, layer-pad and empty-pallet handling, 14,000 containers/h | 2023 | - Bottle washer | KHS | INNOCLEAN | single-end washer for returnable glass, up to 14,500 bottles/h, drive and panel modernised in 2022 | 2007 | Cjdpez I Rcasfx Ak Ajri - Empty bottle inspector | Krones | LINATRONIC M | base, finish, thread, sidewall and residual liquid inspection | 2018 | - Filler-closer monoblock | KHS | INNOFILL NRF | 50 filling valves, cork closer and Zalkin roll-on capper with 10 heads each, CIP, 12,000 bottles/h | 2007 | - Capsuling machine | Kematec | MBK 12 AS | shrink capsules, 12 heating stations, up to 12,000 bottles/h | 2006 | - Bottle dryer | Kematec | T20-3 KMT | air-knife tunnel | 2006 | - Labeller | Krones | ERGOMODUL | 2 cold-glue and 2 self-adhesive stations | 2020 | - Case packer | KHS | INNOPACK SP | pick-and-place packer, KUKA controller | 2006 | - Palletizer and stretch wrapper | ABB, Strapex | FLEXPALLETIZER, SWR 30 | 2 robot cells, pallet destacker, ring wrapper | 2007 | - Pallet labeller | Logopak | LOGOMATIC 920 II PF | print-and-apply | 2007 | - Conveyors | all connecting bottle, case and pallet conveyors of the line Process area - Filtration system | KHS | CORVUS | cartridge microfiltration, 4 housings | 2007 | - Wine warmer-cooler | KHS | INNOPRO | plate heat exchanger, up to 9,900 l/h | 2006 | Condition Used, still installed. Each machine is also listed on its own page with full technical data and photos - follow the link at the end of each row in the scope of delivery. Availability Available immediately. Location: Belgium. Delivery terms: Ex Works Belgium.

Condition: used, Year of construction: 2017, Overview  Csdpfeythvlox Ak Ajri This atmospheric filling monoblock with crown capper was manufactured in 2017 by Spain Cespedes. The machine is designed for bottling beer or other non‑carbonated beverages in 330 ml glass bottles. The equipment combines a gravity filling system with an integrated crown capping unit. The machine is in good condition and is currently not in use. It is being sold due to an upgrade to a higher‑capacity model from the same manufacturer. Technical data  - Capacity: approx. 900 – 1,200 bottles/hour - Formats: 330 ml glass bottles - Application: Bottling of beer or other non‑carbonated beverages - Configuration: 8 gravity filling valves, 1 crown capping head - Neck finish: Crown cap Ø26 mm - Utilities: 400 V / 50 Hz - Dimensions: approx. 2,260 x 850 x 2,250 mm - Weight: approx. 900 kg

Condition: like new (used), Year of construction: 2025, functionality: fully functional, pressing force: 300 t, stroke length: 400 mm, table width: 600 mm, table length: 600 mm, Equipment: documentation/manual, OZKOC 300 tons hydraulic press monoblock frame New in 2025, almost new Table 600x600 mm Stroke 400 mm Cjdsy Szm Nspfx Ak Aeri

Condition: used, Year of construction: 2025, Overview New complete filling and packaging line for beer and carbonated soft drinks in aluminium cans, with an output of 6,000 cans/h at 500 ml and 8,000 cans/h at 330 ml. The line runs from the depalletizer through can rinsing, filling and seaming, tunnel pasteurization, inspection and drying to sleeve labelling, tray shrink wrapping, ABB robot palletizing and pallet stretch wrapping. Two-floor layout: depalletizing on the upper floor, a clamping conveyor lowers the cans to the ground floor for all following machines. All machines are built by Ningbo Cixi except the ABB robot. Technical data - Year of manufacture: 2025 - Capacity: 6,000 cans/h at 500 ml Standard, 8,000 cans/h at 330 ml Standard - Can formats: 330 ml Standard (Ø 66 x 115.2 mm), 500 ml Standard (Ø 66 x 168 mm) - Lid size: 202 for all formats (plug Ø 52.40 mm) - Electrical supply: 380 V / 220 V, 50 Hz - Filler: compressed air and CO2 at 0.4 MPa Cjdpfx Akoz Dv Uye Aori - Pasteurizer heating: steam at 0.4 MPa, steam boiler not included Scope of Delivery - Depalletizer | XD400 | automatic tier sheet removal and empty pallet stacking, Siemens PLC and touch screen, 10,000 cans/h, 7.8 kW, approx. 8 x 4 x 3.3 m - Can lowering conveyor | JSJ-A | S-type clamping conveyor from the upper to the ground floor, fits both can formats - Can rinser | CX-1 | inline spray rinser, 2 sets of can cages, approx. 4,000 mm total length - Filler-seamer monoblock | AXW20-4Q | 20 filling valves, 4 seaming heads, automatic lubrication, change parts for Ø 66 mm cans, 7.5 kW, approx. 5,000 kg, 3,050 x 2,000 x 2,000 mm - Tunnel pasteurizer | BG-PLG | 8 temperature zones, 4 plate heat exchangers, 25 kW, 16,000 x 2,400 x 1,800 mm including heat exchangers and piping - Fill level inspection | YMXS-180G | inline - Leak inspection | inline internal pressure check - Can inverters | FGJ | 2 units - Air knife dryer | CG-1 | 24,000 cans/h, 7.5 kW fan - Can conveyors | magnetic chain conveyors, approx. 97 m up to the labeller with 13 drives and control cabinet, plus 22 m of belt conveyor from the labeller to the shrink wrapper - Sleeve labeller | SLM-150 | up to 9,000 cans/h, PM-1800 steam shrink tunnel with steam generator, mandrels for both can formats - Tray shrink wrapper | BT25 (TPM-250A) | film-only packs and tray with film, up to 25 packs/min, max. pack size 420 x 280 x 350 mm, approx. 3,000 kg - Robot palletizer | ABB | IRB 460 | 4-axis robot, 110 kg wrist load, 2.4 m reach, vacuum gripper for 6, 12 and 24 packs in both can formats - Pallet magazine | automatic, holds 8 to 10 empty pallets - Pallet conveyors | heavy-duty roller conveyors - Pallet stretch wrapper | automatic inline turntable wrapper, 2,000 mm turntable, loads up to 1,200 x 1,200 x 1,800 mm, 20 to 30 pallets/h, Siemens PLC and touch screen Condition New and unused, packed in export wooden cases. The photos show reference machines of the same models from the manufacturer's documentation. Availability Immediately. Location: Serbia.

Condition: excellent (used), Year of construction: 2025, operating hours: 6 h, machine/vehicle number: ZS-AFC37, total width: 1,300 mm, total length: 1,650 mm, total height: 1,500 mm, filling weight (max.): 40 g, filling weight (min.): 10 g, We offer this very good ZONESUN ZS-AFC37 tube filling machine, year of construction 2025. RRP is 13,799 USD The machine has only been used to fill 9000 tubes, so is almost brand new. Unfortunately our client decided to stop this product so we no longer have a use for it. Priced very low for a quick sale to avoid storage costs. It can be used to fill any liquid, including viscous liquids. We used it for olive oil, and the tubes are food safe. Also suitable for cosmetic gels and creams. It can do 1,800 tubes or bottles in an hour. The machine does everything automatically, it is incredible, and very easily adjusted using the touch screen controls. The user only needs to add tubes to the input tray, and take the tubes off the out-tray. Compressor and long lead included if you wish. More details on ZONESUN's website. The ZONESUN ZS-AFC37 is a fully automated monoblock rotary filling and capping machine designed for precise liquid vial packaging. Featuring dual peristaltic pumps and servo-driven control, it delivers ±1% filling accuracy and a throughput of 30–35 bottles per minute. Ideal for chemical, cosmetic, and pharmaceutical applications, it supports customizable filling volumes and uses #17 hoses for hygienic, contamination-free dispensing. Compact and efficient, this system integrates filling and capping into one streamlined unit, reducing labor and maximizing output in cleanroom or production environments. Manufacturer: ZONESUN Model: ZS-AFC37 Crsdpfx Aksz R Rkxj Aei Filling volume: 10ml - 40ml Filling accuracy: ±1 % Working capacity: 30-35 BPM Machine voltage: 110/220 V Frequency: 50-60 Hz Filling pump type: Peristaltic pump Filling hose: #17 Machine dimensions (L×W×H): 1650×1300×1500 mm Package dimensions (L×W×H): 1470×1650×1700 mm Package weight: 644 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2012, Overview This microbrewery had to cease operations recently. The original plan was to continue operations, but as this did not happen for various reasons, the remaining equipment is now being sold as a whole. Equipment - 800-liter brewhouse with steam jacket consisting of boiler, filter tank, lung, liquor tank, tubular cooler, accumulated osmotized water tank, and 3 necessary pumps for its operation. - Industrial osmosis and descaling equipment. - 3 atmospheric cylindrical-conical fermenters with refrigeration jacket and a capacity of 1000 liters. - 3 atmospheric cylindrical-conical fermenters with refrigeration jacket and a capacity of 1300 liters. - 1 cooling system for fermenters with temperature control panel by PLC. - 1 atmospheric monoblock bottling and capping machine for 33 cl bottles with filling capacity of 1,200 containers/hour. Crjdsuzpipepfx Ak Aei - 1 manual 6-spout filler for emergencies and special bottles. - Semi-automatic adhesive labeler. - Ribbon printer for adding variables to the labels, with rewinder.

Condition: used, Year of construction: 2018, Overview  Cjdpfoxn A R Eox Ak Ajri This glass bottle filler and capper was manufactured in 2018 by the Italian company GAI. The MLE 661 Bier model is a compact and precise filling monoblock designed for small to medium-sized breweries and beverage producers. It features Pick & Place technology for pilfer-proof aluminum screw caps (30x20 mm) and an electronic fill height adjustment system for easy format changes. With a capacity of up to 900 bottles per hour, the unit is suitable for bottles ranging from 0.25 L to 1.0 L. The machine is in very good condition and ready for operation. Technical data - Filling system: Isobaric (for beer and other carbonated beverages) - Capacity: 900 bottles/hour - Bottle formats: 0.25 L – 1.0 L - Closure type: Pilfer-proof aluminum screw caps (30x20 mm), Pick & Place system - Electronic fill height adjustment - Stainless steel construction

Condition: used, Year of construction: 2000, machine/vehicle number: LC348, Used Filling Line For Edible Oil In PET 1L Bottles Capacity: 6.000 bph x 1,0 L Blow Molding Machine KOSME KSB 3000 – 2001. – 2 pcs x 3.900 bph Box for preforms with transport to the blower Compressor for cooling moulds MTA S.R.L. – 2000 KOSME bottle air conveyor – 1999 AISI 304 stainless steel Electrical control cabinet with PLC Built-in air filters It transports bottles from blower to filler Filling Monoblock Filler and capper – ICS-Slovenia – 1995 – 6.000 L/h Labelling Machine Labeller ICS – 1995 – paper labels, cold glue Conveyor belts ICS – 1995 Packer in transport boxes 3×5 bottles – ICS – 1995 Shrink Wrapper Shrink wrapper SMIPACK-packer in foil 2×5 bottles – 2013 Pallet Wrapper Pallet wrapper ZLATOROG-Slovenia – 1999 Compressor KAESER low and high pressure compressors – 2000 Refrigeration dryer There are spare parts worth It has complete technical documentation Required space for equipment: 600 m2 Crodpfx Ajyhbzdok Aji Required installed power (equipment, compressors, refrigerators): 495 kW The Used Filling Line For Edible Oil In PET can be seen in full production function until December 15, 2022

Condition: reconditioned (used), Year of construction: 2014, operating hours: 1 h, functionality: fully functional, overall weight: 175 kg, total length: 850 mm, total width: 360 mm, total height: 470 mm, volume flow: 400 m³/h, final pressure: -970 bar, input voltage: 400 V, input frequency: 50 Hz, input current: 24 A, type of input current: three-phase, type of cooling: water, rotational speed (max.): 1,450 rpm, warranty duration: 6 months, protection type (IP code): IP54, Liquid ring vacuum pump, monoblock, refurbished, tested. New cover plate, acid-resistant impeller, SIC/VITON mechanical seal and new bearings. Applications include the chemical industry, pharmaceutical production, and wastewater drainage. Spare parts, service, and maintenance are available. Warranty: 6 months after proper commissioning. For performance data, please refer to the attached data sheet. Request a quote for a video of the test! We can assist with delivery and installation. Codpoyzbfqjfx Ak Aeri

Condition: used, Year of construction: 2014, Overview  This complete glass bottling line was manufactured between 2010 and 2014 by several reputable European manufacturers, including CIMEC (Italy). The main monobloc — a CIMEC 16-16-1 rinsing, filling and crowning unit — was built in 2014 and operated at a natural mineral water facility until July 2025. The line also includes auxiliary equipment such as self-adhesive and wrap-around labellers, a DE filter, and a heat-shrink capsule tunnel, making it a fully functional and compact filling line for glass bottles with crown caps. All equipment remains installed, is in good condition, and can be inspected on site. Technical data  - Year of Manufacture: 2010–2014 - Application: Water and other beverages - Capacity: - Approx. 2,000 bph (330 ml) - Approx. 1,670 bph (500 ml) - Bottle Formats: 250 ml – 1,000 ml (included: 330 ml & 500 ml) - Closure Type: 26 mm crown caps - Configuration (Monobloc): - 16 rinsing heads - 16 filling heads - 1 crowning head Scope of Delivery  - Rinser / Filler / Crowner Monoblock | CIMEC | Monobloc 16-16-1 | 2014 | 16/16/1 configuration, 26 mm crown caps, 2,000 bph Crodpfx Akoyb Tkdj Aoi - Self-adhesive labeler | Canellitech | V500 | 2012 | Linear, up to 3. 500 bph - Single-head labeler (wrap-around) | Identapply | Servo 125 RH | 2010 | With conveyor belts - DE filter | Spadoni | - | 2011 | 80 hl/h - Shrink tunnel | TOSA | TN1 | 2011 | For PVC capsules  

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground, high-precision recirculating ball screws. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. This characteristic is important for ensuring balanced movement even in more complex tasks. The various axes are driven by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters, which can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different Csdsvvi Rfspfx Ak Asri

Condition: used, Year of construction: 2019, Overview  This vacuum filling and capping monoblock was manufactured in 2019 by the German company ALWID Maschinenbau GmbH. The model ALWID-SUPERIOR-48HV-10PP is designed for level filling of glass bottles using a high-vacuum system, making it ideal for low- to medium-viscosity liquids such as spirits or similar products. The system features 48 filling valves and a 10-head ROPP capping unit, ensuring efficient, high-precision operation. With a performance of up to 12,500 bottles per hour (0.7 L), it offers a professional solution for high-speed bottling lines. The machine is CIP-capable, equipped with spray balls, and includes a Siemens S7 control system. It has approximately 14,000 operating hours and is already dismantled. Missing peripheral components such as the cap sorter, bunker conveyor, and chutes can be procured upon request and a factory overhaul is also available upon demand. Technical data  - Filling system: High-vacuum with liquid ring pump - Capping system: 10-head ROPP (PP) closer - Capacity: Up to 12,500 bph (0.7 L bottles) - Filling valves: 48 - Bottle size: Max. 105 mm (W) × 65 mm (D) for shaped bottles (every second valve used) - Control system: Siemens S7 - Cleaning system: CIP with spray balls - Operating hours: Approx. 14,000 h - Working direction: Right to left Crsdpfoxqhvlex Ak Aji - Dimensions (machine): 4.20 m × 2.80 m × 2.90 m (W×D×H) - Dimensions (filling tower): 1.40 m × 1.30 m × 3.40 m (W×D×H) Scope of delivery  - Filling and capping block | ALWID Maschinenbau GmbH | ALWID-SUPERIOR-48HV-10PP | 2019 | High-vacuum filler with 48 filling stations and 10 ROPP capping heads, Siemens S7 control system, CIP-capable, approx. 14. 000 operating hours - Filling tower | ALWID Maschinenbau GmbH | - | 2019 | 3.40 × 1.30 × 1.40 m, part of the system - Format parts | ALWID Maschinenbau GmbH | - | 2019 | 10x PP28x22 mm deep capping heads, 1x format set for 76 mm straight-neck bottle - Accessories | 2 EURO pallets with format and head components  

Condition: new, functionality: fully functional, Year of construction: 2026, controller model: Estun NC E21, stroke length: 100 mm, throat depth: 180 mm, operating speed: 9 mm/s, reverse speed: 80 mm/s, table height: 290 mm, overall weight: 1,500 kg, total length: 1,500 mm, total width: 1,300 mm, total height: 1,800 mm, input voltage: 400 V, input current: 380 A, pressing force: 40 t, clearance between the columns: 900 mm, ram plate length: 500 mm, retraction force: 40 t, table length: 1,320 mm, type of input current: three-phase, motor manufacturer: Siemens, Equipment: CE marking, documentation/manual, hydraulics, safety light barrier, The Digima WCY-40T/1320 hydraulic press brake is a compact and robust machine designed for the precise bending of sheet metal and smaller metal components. Its space-saving dimensions make it an excellent choice for metalworking workshops, manufacturing plants and companies producing enclosures, guards, panels, profiles and various technical components. The machine provides a nominal pressing force of 400 kN, equivalent to 40 tonnes, and a working-table length of 1,320 mm. The distance between the columns is 900 mm, the throat depth is 180 mm, the ram stroke is 100 mm, and the maximum open height is 290 mm. The back gauge offers an adjustment range of up to 500 mm, enabling the sheet to be positioned accurately before bending. The Digima WCY-40T/1320 is equipped with an Estun E21 NC control system, which controls the position of the back gauge on the X axis and the working position of the Y axis. The controller includes an operation counter, intelligent positioning, screw-backlash compensation and a function that retains the programmed position after the power supply has been switched off. A positioning resolution of 0.1 mm or 0.01 mm supports accurate and repeatable production. The press brake is powered by a 3 kW Siemens main motor. Its hydraulic system uses Bosch-Rexroth components and a Sunny hydraulic pump, while the electrical system includes Schneider Electric components. PARKER seals and guide rings increase the durability of the working mechanisms and support reliable operation during intensive daily use. The ram approach and return speeds are 80 mm/s, while the working pressing speed is 9 mm/s. These parameters enable efficient machine positioning and smooth bending operations. The rigid monoblock steel frame is welded and heat-treated to provide high structural stability and resistance to deformation under load. The machine is equipped with side guards, a front safety curtain, protection against excessive hydraulic pressure and high oil temperature, motor overload protection, electrical leakage protection and a safety relay. The electrical cabinet has an IP65 protection rating, and the press brake is CE-certified. The standard equipment includes bending tools, two front material-support arms, a foot-control pedal, foundation bolts, spare sealing rings and mechanical and electrical documentation. The upper punch features an 86° working angle and an R0.5 tip radius, while the multi-V lower die allows the operator to select a suitable bending position according to the type and thickness of the material. The Digima WCY-40T/1320 is a practical, user-friendly and economical press brake for companies requiring a reliable machine for the everyday processing of small and medium-sized components. Its combination of a 40-tonne pressing force, a 1,320 mm working length, NC control and high-quality branded components makes it suitable for both one-off projects and small batches of repeatable parts. Credpfozlqkuex Ak Aei

Condition: used, Year of construction: 2007, Working area: 2780 x 1140 mm (vertical milling) 2500 x 950 mm (horizontal drilling) X-Y travel: 2980 x 1271 mm Z-axis travel: 200 mm Passage height: 180 mm The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. On this mobile unit carrier, the working unit is mounted on prismatic, ground guides and the recirculating ball slide. Description of the units and accessories (basic) Drilling unit: Drilling head with 10 + 4 spindles · 6 individually accessible vertical spindles in X · 4 individually accessible vertical spindles in Y · 2 horizontal spindles in X (1 + 1) · 2 horizontal spindles in Y (1 + 1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M 10 with 11 mm fitting · Extraction nozzle: D = 160 mm Vertical milling unit (position 2) · Tool chuck HSK 63F · Speed 1,500 - 24,000 rpm continuously adjustable via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Right-hand / left-hand rotation · Ceramic bearings · Scope of delivery: 4 tool chucks (right) without collet chuck · Tool changer · Side-mounted tool magazine 7-way (TR7) with full encapsulation to prevent chipping · 7 tool positions for HSK 63F tool holder arranged in a row · maximum tool diameter D=120 mm · maximum weight per holder 4.5 kg · maximum tool weight of all tools 20 kg (TR7) · angular gears can be accommodated Horizontal milling unit (position 1) Horizontal unit with two opposite outputs for milling and grooving. · Speed 9,000 - 18,000 rpm continuously variable via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) · Motor power 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Bore saw blade (ER 32): 50 mm · Mandrel diameter saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum freedom of movement. The vacuum quick clamping system ensures maximum flexibility with precise positioning and optimal grip of the workpieces. · 4 supports 900 mm continuously adjustable in X · 8 vacuum suction cups round D = 110 mm continuously adjustable in Y (2 per support) · 2 stops in X (1 x left / 1 x right) · 1 stop in Y per support (total 6) · The retractable reference stops are controlled via CNC. · Scope of delivery: 4 plug-on adapters for suction cups · Pendulum machining standard (2 working areas) Axis movement The drive system in X, Y and Z is carried out via ground ball screws of the highest precision class. The ball drive screw of the X-axis is located exactly in the center Crodjx Twdyopfx Ak Aji

Condition: used, Year of construction: 2007, Overview This complete can filling line was manufactured mainly in 2007 and is designed for the filling of beer, carbonated soft drinks and other carbonated beverages in aluminium cans. The line has a capacity of approx. 6,000 cans per hour and is suitable for several can formats, including 250 ml slim, 330 ml sleek, 330 ml standard and 500 ml standard cans. The line includes depalletizing, carbonation, filling and seaming, tunnel pasteurization, tray packing / shrink wrapping, conveyors and control system. The equipment is still installed, currently out of production and available for inspection in Northern Europe. The layout shows a compact line arrangement with depalletizer, filler / seamer, tunnel pasteurizer and downstream packaging area. Technical Data - Line type: Complete can filling line - Capacity: approx. 6,000 cans/hour - Main year of manufacture: 2007 - Application: Beer, CSD and carbonated beverages - Can formats: 250 ml slim, 330 ml sleek, 330 ml standard, 500 ml standard - Packaging: 3x4 or 4x6 trays with shrink foil - Filling / seaming: Monoblock 16/4 - Control system: Siemens SIMATIC S7-300 - Condition: excellent condition - Status: still installed, currently out of production - Location: Northern Europe Inspection: possible anytime Scope of Delivery Cedpfozh Ifujx Ak Aori - Can Depalletizer | TMG Impianti | – | Included with conveyors | 2007 - Carbonator | Comac | Carbonator 1 Column | - | 2007 - Filling & Seaming Monoblock | MCD Bottling Solution / Comac | Can Filler 16-4 P.164.85 | 16 filling valves / 4 seaming heads | 2007 - Tunnel Pasteurizer | Comac | Tunnel Pasteurizer | 2007 - Tray Packer / Shrink Wrapper | Dimac | Star One | For 3x4 and 4x6 trays with shrink foil | 2007 - Can Conveyors | Various | – | Complete conveyor system included | 2007

Condition: used, Year of construction: 2014, Overview  This filling and labeling monoblock was manufactured in 2014 by the Italian company Framax. The machine was last operated in July 2025 and is still installed in the brewery but not in operation. It is immediately available for sale. Full original instruction manuals for both the filler/capper and labeler are included. Credpfx Akexalibo Aei Technical data - Capacity: Approx. 2,000 bph (330 ml bottles, manufacturer estimate); approx. 1,670 bph (500 ml bottles, actual use) - Formats possible: 250 ml – 1,000 ml - Formats included: 330 ml and 500 ml long neck bottles - Bottle cap type: 26 mm crown caps - Execution: - Filler/capper: Modulblock 10/1-C - Labeler: LLAC-R-SQ (VAR STEP) - Additional features: - Hot foil stamper (added later) - CIP dummy bottles - Change parts for 330 ml format

Condition: used, Year of construction: 2010, machine/vehicle number: SO146, Used SIDEL PET Blow molding machine - Year 2010Technical Specifications & Performance DataThis Sidel PET blow molding machine, model SBO10, is designed for the rotary stretch-blow molding of PET bottles from preforms. Manufactured in 2010, the machine is configured with 10 cavities and has a stated production capacity of 14,000 bph. The Ø28 1881 neck finish is specified for the installed mold and preform configuration.Manufacturer: SidelModel: SBO10Year: 2010Production capacity: 14,000 bphNumber of cavities: 10Preform neck finish: Ø28 1881Blower footprint: 8,900 mm length x 3,200 mm widthInstalled power: 306 kWMain electrical supply: 3 x 400 V, 50/60 HzMaximum current: 452 AAdvanced Automation & Control SystemsThe machine operates from a 3 x 400 V electrical supply and is specified for 50/60 Hz operation. A 24 V remote-control circuit is indicated. Its electrical installation includes a short-circuit rating of 25 kA RMS symmetrical, supporting integration into an appropriately designed industrial electrical system.The rotary PET blow molding process is suited to automated preform handling, bottle formation and discharge to downstream bottling equipment. The supplied preform handling equipment includes an elevator column, mini-hopper assembly and main hopper/feeder.Production Line Integration CapabilitiesThis PET bottle blower can serve as the bottle-forming stage of a used bottling line for beverage production and industrial packaging. It can be integrated with preform supply equipment upstream and with air conveyors, filling monoblocks, labeling machines, shrink wrappers and palletizing systems downstream.The supplied equipment list includes a Sidel EBH 2050 PET preform press manufactured in 2010 and a Sidel-Alsim air conveyor manufactured in 1999. The air conveyor supports transfer of newly formed PET bottles toward subsequent packaging machinery.Preform elevator column: 5,200 mm length x 1,300 mm width x 1,200 mm height; 250 kgMini-hopper assembly: 2,900 mm length x 1,630 mm width x 1,160 mm height; 367 kgMain hopper/feeder: 2,590 mm length x 1,850 mm widthMachine Condition & Maintenance HistoryThe machine is presented as a second hand Sidel PET blow molding machine with identified year, model, output and electrical data. Buyers can use the stated configuration and associated handling equipment details when planning inspection, recommissioning and integration into a PET bottling or industrial packaging production line.Operational Performance & VersatilityThe SBO10 is designed to convert PET preforms into finished PET bottles through a rotary stretch-blow molding process. Its 10-cavity arrangement supports continuous bottle production at the stated output. The specified Ø28 1881 neck finish identifies the available preform and bottle-neck configuration.As part of beverage production equipment, a PET blow molding machine typically supplies e... Credpfoz E Dfiox Ak Aji

Condition: used, Year of construction: 2009, machine/vehicle number: CA82, Used ROBINO & GALANDRINO capsuling machine - Year 2009Technical Specifications & Performance DataThis automatic capsuling monoblock is engineered for precision capsule application on bottles within a professional bottling environment. Manufactured by Robino & Galandrino, the SUPERBLOC series is renowned for robust construction, reliable operation, and high-quality finishes on glass bottles used in beverage production. The model identified is SUPERBLOC M 4 T, built in 2009 and CE marked for compliance with European safety and machinery directives. This second hand machine is suitable for integration in a used bottling line, supporting industrial packaging requirements for beverage producers.Manufacturer: Robino & GalandrinoModel designation: SUPERBLOC M 4 TYear of manufacture: 2009Machine type: Automatic capsuling monoblock (rotary platform)Container compatibility: Glass bottles (cylindrical and common wine-style profiles)Marking: CEApplication: Industrial beverage packaging and bottlingAdvanced Automation & Control SystemsDesigned for consistent capsule application with minimal operator intervention, this monoblock typically features synchronized drives and an integrated control panel for recipe management and format changes. Safety interlocks and guarding protect operators, while emergency stop circuits meet CE standards. The automation concept supports precise capsule positioning and repeatable performance across production runs.Integrated control panel with machine diagnosticsAutomatic magazine feed and capsule distribution (depending on configuration)Quick adjustment for bottle height and capsule lengthCE-compliant safety circuits and guardsProduction Line Integration CapabilitiesThe SUPERBLOC M 4 T is designed to operate inline with upstream and downstream bottling equipment. It couples efficiently with fillers, corkers, wirehooders, and labelers via standard conveyors. Format changeovers accommodate common glass bottle sizes used in beverage production, enabling flexible operation within mixed-format lines.Inline or standalone operation with synchronized conveyorsCompatible with upstream corking/capping and downstream labelingFormat change components for multiple bottle diameters and heightsMachine Condition & Maintenance HistoryManufactured in 2009 and CE marked, this second hand capsuling monoblock reflects the durable engineering of Robino & Galandrino equipment. The SUPERBLOC platform is known for accessible maintenance points, rugged mechanical assemblies, and availability of wear parts, supporting long-term reliability in beverage production environments.Operational Performance & VersatilityThis capsuling monoblock is suitable for a variety of capsule materials commonly used in beverage packaging. Depending on the installed heads and accessories, it can process PVC shrink capsules, polylaminate aluminum capsules, and specialized capsules for sparkling programs. The rotary layout ensures consistent application and alignment, del... Credoz E Di Iepfx Ak Aei

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller model: MILLPLUS iT HEIDENHAIN, table load: 800 kg, 5-axis simultaneous machining center! TECHNICAL DETAILS X travel: 1,250 mm Y travel: 710 mm Z travel: 710 mm Table size: 1,500 x 800 mm Table load capacity: 800 kg Spindle speed: 12,000 rpm Spindle motor: 15 / 10 kW Spindle taper: SK 40 Tool changer: 60 positions MACHINE DETAILS CNC control: MILLPLUS iT HEIDENHAIN Total power consumption: 44 kVA Dimensions & Weight Footprint: approx. 3.5 x 2.65 x 2.65 m Machine weight: approx. 10.5 t EQUIPMENT B-axis (-120 / +30) NC rotary table integrated into fixed table Direct measuring system Cjdpfjxwlgzex Ak Aori 3D probe infrared HEIDENHAIN TS 640 Coolant system 40 bar, 600 l Rinsing gun Chip conveyor 3D Quickset software Note: The machine is fully functional. The rotary table and X-axis produce noise.

Condition: used, Year of construction: 1998, machine/vehicle number: M325, Used SIMONAZZI EUROSTAR RAA 282 filling triblockTechnical Specifications & Performance DataThis Rotary Filling Monoblock is engineered for PET bottle handling and optimized for water and carbonated soft drink applications. Manufactured by Simonazzi, model Eurostar RAA282, it combines robust rotary filling technology with integrated capping to deliver consistent performance in beverage production and industrial packaging environments. As part of a used bottling line or a second hand upgrade, it offers reliable throughput and quality results.Manufacturer: SimonazziModel: Eurostar RAA282Year of manufacture: 1998Configuration: Rotary filling monoblock with integrated capper (Arol)Maximum speed: 18,000 bottles/hourCurrent bottle format: 1.5LCompatible containers: PET bottlesMaximum bottle height: 320 mmMachine pitch: 110 mmWorking direction: ClockwiseTransfer type: Neck handlingCO2 capability: Yes (isobaric operation for carbonated products)Advanced Automation & Control SystemsThe monoblock leverages proven rotary mechanics to ensure smooth container handling and stable filling at high speeds. Neck-handling transfer minimizes scuffing and maintains accurate alignment through the filling and capping phases. Standard operator controls facilitate format adjustments, while machine guarding supports safe operation on modern beverage production lines.Rotary motion for continuous, high-efficiency fillingNeck-handling for stable PET bottle controlIntegrated capping turret by Arol for synchronized operationOperator-friendly controls and adjustable settings for format changesSafety guards and interlocks supporting compliant operationProduction Line Integration CapabilitiesThis monoblock integrates seamlessly into upstream and downstream bottling equipment within a used bottling line or a complete beverage production system. Its neck-handling design simplifies alignment with infeed/outfeed conveyors and downstream inspection, labeling, and packaging machinery.Inline operation with standard conveyor interfacesSuitable for PET lines dedicated to water and soft drinksCurrent setup for 1.5L; format change parts can be configured as requiredCompatible with typical line components such as inspectors, labelers, and packersMachine Condition & Maintenance HistoryThe unit is refurbished, guaranteed, and ready for operation. It is supplied with compatible spare parts to support startup and routine maintenance. This condition profile makes it a compelling choice for second hand bottling equipment buyers seeking minimized commissioning risk and predictable performance.Refurbished and guaranteedReady for immediate useDelivered with compatible spare partsInspection available by appointmentWarranty: 6 monthsOperationa... Crodpfx Aks Adyyyj Asi

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: BB 60, Tube Bender BB 60 - model BB 60 - capacity up to 60 x 3,6 mm (mild steel) round tube mild steel - digital readout - bending angle programable - with foot pedal - bending speed ca. 3 rpm - motor 3 KW 400 volt 50 hz 3 ph. - all shafts and necessary parts are heat treated and grinded - monoblock body CK 45 - weight 400 kg - 400 volt 50 Hz 3 ph. Crsdpfx Asd Eywyek Asi

Condition: used, Year of construction: 2021, operating hours: 1,480 h, ---- Edition C 1.0 Dozer blade Rubber tracks Monoblock Radio Air conditioning AUX I 3rd control circuit / AUX II Control circuit for grabber / AUX V Diesel refueling pump Codpfxezr Tt So Ak Asri Advanced overload warning system Includes Powertilt HS03 (without safety hook!) Location: Würzburg

Condition: used, Year of construction: 2006, * Work area: 2,650 x 1,240 mm * X-Y travel: 2,995 x 1,385 mm * Z-axis travel: 200 mm * Clearance height: 180 mm C-axis deactivated - 3-axis machine Cedpfx Akjx Twcco Aeri The structure of the base body is a monolithic construction made of thick-walled steel. It is reinforced throughout the machine bed by welded triangular plates, making it extremely stable. The triangular shape used for the supporting parts, with a large base, is the key to long-lasting precision and stability. The machine's layout allows the user an optimal workflow despite minimal space requirements. The base body, constructed in this way, provides the machining unit with a balanced and secure base with particularly good load distribution. The mobile unit carrier is made from a solid monoblock. It is positioned in the X-direction on prismatically ground guides via ball screw slides. The machining unit is, in turn, attached to the mobile unit carrier on prismatic, ground guides and the ball screw slide. Description of units and accessories (base) Drilling unit: Drilling head with 12 + 6 spindles * 7 individually selectable vertical spindles in X * 5 individually selectable vertical spindles in Y * 4 horizontal spindles in X (2+2) * 2 horizontal spindles in Y (1+1) * Speed: 4,000 1/min * Power: 2.2 kW * Grid: 32 mm * Drill chuck: M 10 with Morse taper No. 11 Nut saw unit in "X": * Integrated in the drilling head * Nut saw blade with a diameter of up to max. 120 mm Main milling unit (Position 2): * Tool holder HSK 63F * Speed 1,500 - 24,000 1/min, stepless via inverter * Motor power 4.4 kW (6 hp) from 12,000 1/min (S1) * Motor power 6.6 kW (9 hp) from 12,000 1/min (S6) * Right/left rotation * Ceramic bearings * Scope of supply: 4 pcs. tool holder (right) without collet Tool changer R8L Automatic tool changing device for 8 tools. Mounted on the rear unit carrier for quick access to the tools. * Number of tool positions: 8 * Max. tool diameter: 120 mm * Max. weight per tool: 4.5 kg * Max. total weight of all tools: 22 kg * Holder for 1 angular gear * Mounted and moving in X Horizontal milling unit (Position 1) Horizontal unit with two opposite outlets for milling and grooving. * Speed 9,000 - 18,000 1/min, stepless via inverter * 1 outlet for collet 3-20 mm (ER 32) * 1 outlet for saw/collet 3-12 mm (ER20) (For saw D=120 mm / bore 50 mm) * Motor power 3 kW (4 hp) * Max. tool diameter, front milling: 20 mm * Max. tool length, front milling: 110 mm * Max. tool diameter, rear milling: 12 mm * Max. tool length, rear milling: 80 mm * Max. saw blade diameter: 100 mm * Bore in saw blade (ER 32): 50 mm * Arbor diameter, saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum "freedom of movement". The vacuum quick-clamping system offers maximum flexibility with precise positioning and optimal workpiece clamping. * 6 supports 1000 mm, stepless pneumatically adjustable in X * 12 vacuum suction cups, round D = 110 mm, steplessly adjustable in Y (2 pcs. per support) * 2 stops in X (1 x left / 1 x right) * 1 stop in Y per support (total 6 pcs.) * The retractable reference stops are CNC-controlled * Pendulum machining standard (2 working areas) --- other clamping systems are available as optional extras --- Axis movement The drive system in X, Y and Z is via ground ball screws.

Condition: used, Year of construction: 2022, operating hours: 639 h, Monoblock boom Crodpjz Nvf Rjfx Ak Aei Rubber tracks Dozer blade Incl. MS01 quick-coupler Location: Aachen