Used Mould Press for sale (13,992)

Condition: used, Year of construction: 1993, pressure 315 t Hjdpfx Ajvuudzob Uek distance between columns 2060 mm stroke 700 mm Distance table/ram, stroke up 1100 mm Table surface area 2000 x 1000 mm Die cushion pressure in table 125 t Die cushion stroke in table 200 mm die cushion area 1200 x 600 mm Table height above floor 750 mm table height over floor (if standing without pit) 1100 mm Side window 720 mm Ram surface 2000 x 1000 mm Oil volume 1800 l Power capacity 90,0 kW Weight 35,0 t Dimensions (WxDxH) 3,6 x 2,75 x 5,65 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, cutting impact cushioning (with motoric depth adjustment) No foundation pit necessary can be offered without putting into operation (without operator’s console / screen) or alternatively with new control Siemens S 7-1500 F, with new operator’s console / screen and new user interface

Condition: used, Year of construction: 1988, pressure 300 t distance between columns 1800 mm stroke 1000 mm Distance table/ram, max. stroke up, adjustment up 1300 mm Table surface area 1600 x 1200 mm Hedjvut Hnopfx Ab Ujk Table height above floor 1080 mm Ram surface 1600 x 1200 mm Weight 24,0 t Dimensions (WxDxH) 2,8 x 2,1 x 6,0 m permitted for manual loading according to the German Safety Regulations (UVV §20) with oil-hydraulic drive, controllable dependant on pressure/time and way, two-hand operation can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F Video at seller's site before dismantling available

Condition: used, Year of construction: 1973, pressure 500 t distance between columns 1620 mm Hedpfsvuk Euox Ab Uek stroke 40 - 160 mm no. of strokes 32 / 48 Hub/min dayligth (stroke and adjustment up) 660 mm column travel -side 400 x 430 mm table surface area 1600 x 1300 mm table height over floor 750 mm ram surface 1400 x 1200 mm power requirement 44,0 / 66,0 kW weight of the machine ca. 56,00 t required space 3,55 x 2,55 x 5,1 m with motor, pneumatic clutch/brake combination (Desch), mechanical overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment as is where is, WITHOUT putting into operation / WITHOUT additional work, free loaded to truck Video of 'sister maschine' available

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, total width: 6,265 mm, total length: 7,420 mm, total height: 3,900 mm, Baling Press Henschel PS 3-30 / 30 B Year of manufacture: 1999 (refurbished and modernized by ATM in 2016) Immediately operational (all necessary repairs and servicing have been carried out by us) Main dimensions of the entire machine: Length: 7420 mm Width: 6265 mm Height: 3900 mm Total weight: approx. 38 t Feed opening: 1210/2150 x 1900/2340 mm Hsdpfxsyx Axgo Ab Uok Technical data: Motor: 1 x 90 kW Pressing force: - 1st compression: 1000 kN - 2nd compression: 1570 kN - 3rd compression: 2000 kN - Bale door closing force: 200 kN Bale size: 300 x 300 mm

Condition: used, Year of construction: 2005, Biesse Comil Cosmo NK Corpus press Year of manufacture: 2005 Press dimensions: 2500 x 1300 mm Press cycle: Automatic Press type: Motorized Motor power: 3.7 kW Press pressure: 12,000 N Hjdpfx Aoywxzzjb Uok (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: new, Technical data: Hedeuxpwnepfx Ab Usk Pressing pressure max.: 5000 kg Projection: 315 mm Installation height: 800 mm Stroke: 530 mm Height: 1650 mm Punch thickness: 56 mm Table surface: 250 x 360 mm Recess in the table: 85 x 125 mm Turntable with 4 slots: ø 237 mm Weight, approx.: 145 kg

Condition: used, Digitale Etikettendruckmaschine SurePress mit Tintenstrahltechnologie / Digital Label Press with Inkjet Technology Hjdpfx Ajyx Ar Hob Uok Digitale Etikettendruckmaschine / Digital Label Press Epson Sure Press L-4033AW Baujahr / Year 2016 - Serial-No. RXH0000088 Maximale Druckauflösung / Maximum Print Resolution: Papier / Paper 720 x 720dpi Film 1440 x 720dpi Rollbedruckstoff Durchmesser max. 100mm Druckgeschwindigkeit / Print Speed: Bis zu 5 m (16') pro Minute bei 720 x 720 dpi (auf Papier) / Up to 16' (5m) per minute at 720 x 720 dpi (on paper) Die Epson SurePress L-4033AW ist eine industrielle Inkjet-Digitaletikettendruckmaschine, die speziell für den Etikettendruck in hoher Qualität konzipiert wurde.  Besonderheit, das weiße Tintenset (AW = Auto White) ermöglicht den Druck auf transparenten Filmen und metallischen Substraten. The Epson digital label press capitalizes on Epson's acclaimed MicroPiezo® ink jet technology to create output with smooth gradations and incredible color quality. The L-4033A has six-color (Cyan, Magenta, Yellow, Black, Orange and Green), industrial-quality, water-based ink set produces a remarkable range of colors for impressive, professional and consistent results.  Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2010, total length: 3,200 mm, total width: 1,800 mm, total height: 2,000 mm, Weight: 4.500 kg Hodpfeywuzdsx Ab Usk - Year: 2010 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 7121/13220 - Drive system: Conventional - Power [kW]: 4.0 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 63 - Max. working width [mm]: 2550 - Max. stroke [mm]: 102 - Crowning system: None - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Options: Additional finger stop - Transport dimensions: 3200mm x 1800mm x 2000mm (l x w x h) - Transport weight [kg]: 4500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1985, Strip feeding line for automatic supply of sheet metal strip in press lines. Hjdpfxeyyclco Ab Ujk Manufacturer: Müller Weingarten AG Type: UWR 60.4 Year of manufacture: 1985 Strip width: 0–600 mm Sheet thickness: 0.5–4 mm Feed length: steplessly adjustable 30–500 mm

Condition: used, Year of construction: 1987, Mechanical high-performance stamping press for industrial serial production of stamped and formed parts. Manufacturer: Müller Weingarten AG Type: HU2-315.25 Year of manufacture: 1987 Press force: 3150 kN Stroke: 300 mm Slide adjustment: 250 mm Strokes per minute: 15–90 min⁻¹ Machine weight: 100,000 kg Total weight: 107.8 t Individual weight G1: 91 t Individual weight G2: 5.4 t Individual weight G3: 2.4 t Individual weight G4 without coil: 7.5 t Individual weight G5 without coil: 1.5 t Hedpoyyccbefx Ab Ujk Machine motor power: approx. 92 kW Static foundation load: approx. 98.8 t Dynamic load on slide: 240 kN Dynamic load at cutting impact: 160 kN

Condition: used, pressing force: 250 t, Mechanical high-performance stamping press for series production of stamped and formed parts. Manufacturer: Müller Weingarten AG Pressing force: 2500 kN Drive type: mechanical Stroke: 160 mm Strokes per minute: 20–80 min⁻¹ Hjdpfoyyb U Aex Ab Uek Table size: 1000 x 1600 mm Strip width: 30–500 mm Max. coil diameter: 1800 mm Parts produced per day: 43,000 Number of parts: 50 Number of progressive dies: 50 Tool change time: 30 min Shift occupancy: 4 Total weight: 64 t Single weight G1: 48.5 t Single weight G2: 5.2 t Single weight G3: 2.3 t Single weight G4 without coil: 6.5 t Single weight G5 without coil: 1.5 t Machine motor power: approx. 77 kW Total connected load of system: approx. 183 kW Static foundation load: approx. 62 t Dynamic ram load: 85 kN Dynamic cutting impact: 125 kN

Condition: used, Year of construction: 1989, pressing force: 620 t, Krupp Multistage Press PST-0-II 120-500/1+6/450/500 NC Multistage transfer press for automated sheet metal forming and series production of stamped and drawn parts. Manufacturer: Krupp Maschinentechnik GmbH Machine type: PST-0-II 120-500/1+6/450/500 NC Year of manufacture: 1989 Total press force: 6200 kN Max. drawing stage press force: 5000 kN Max. cutting stage press force: 1200 kN Number of stations: 6+1 Station pitch: 450 mm Max. press force per station: 2500 kN Cutting ram stroke: 160 mm Drawing ram stroke: 500 mm Ram adjustment: 50 mm Hedpjyyb I Asfx Ab Uok Continuous stroke rate: 8–32 strokes/min Setup stroke rate: 2–8 strokes/min Ram energy capacity: 100 kJ Energy capacity in setup mode: 20 kJ at 4 strokes/min Energy capacity in setup mode: 5 kJ at 2 strokes/min Main motor drive power: 97 kW Clearance between uprights: 3300 mm Clearance between oil trays: 3100 mm Drawing depth: 100 mm Ram stroke drawing: 500 mm Ram stroke cutting: 160 mm Coil entry height: 1480 mm Die installation height: 1050 mm Table size: 1000 x 2600 mm Strip width: 100–600 mm Max. coil diameter: 1800 mm Press weight: approx. 180 t Air consumption: 13.5 Nm³/h Total connected load: approx. 200 kW Location: Munich

Condition: used, Repair-needing Single-Column Eccentric Press CHINA Type JB23-16 Machine no. 1711BL16D11-17 Year of manufacture: 2017 Press force: 16 tons Hjdeyxrhwspfx Ab Usk Throat depth: 160 mm Table size: 480 x 320 mm, with 18 mm T-slots Ram surface: 175 x 130 mm Table through-hole: Ø 125 mm Ram stroke: 60 mm Ram adjustment travel: 40 mm Max. installation height: 330 mm Clamping pin bore: Ø 35 mm Ram strokes: 130 strokes/min Motor power: 2.2 kW Drive power: 380 Volt, 50 Hz - Mechanical rotary wedge clutch - No stroke adjustment Required space (L x W x H): 1300 x 900 x 1850 mm Weight: 790 kg Mechanically in need of repair, clutch makes loud knocking noise. Release mechanism requires reworking. We are clearing space Priced to sell – ideal for export.

Condition: good (used), Year of construction: 1984, Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Manufacturer: HELMERDING hiw, Single-column eccentric press type ERVL65B -Pressure capacity: 65 tons -Coupling: pneumatic -Drive: 5.0/6.0 kW 1440/2890 rpm -Stroke: adjustable 14 - 90 mm Hedpfxoywzh Ro Ab Ujk -Table size: 590 x 740 mm -Table cutout: 140 x 240 mm -Protrusion: 310 mm -Punch holder: Ø 40 mm -Insertion height 340 mm -Dimensions: 2070/1050/H2140 mm -Weight: 4430 kg

Condition: used, Year of construction: 2019, Overview This belt press was manufactured in 2019 by SRAML. The machine is designed for the continuous extraction of juice from crushed apples using a continuous belt pressing system. It was operational when taken out of regular production and has been maintained as backup equipment. The machine was replaced by a higher‑capacity press. Technical data  Capacity: 1,500 kg/h (apples) Application: Juice extraction from crushed apples Configuration: Continuous belt pressing system with mechanized self‑cleaning filtration system Filtration system: Mechanized self‑cleaning filter for removal of seeds and stems Hsdeyw Aa Ijpfx Ab Uok

Year of construction: 1999, condition: used, Membrane press Orma PM/AIR Year of construction 1999 Serial number 52850199 Dimensions 2300*900mm Max panel size 2200x800mm Max panel thickness 40mm 8 cylinders diameter 100mm Stroke 150mm Pressure 160T Hjdpewnhicofx Ab Ujk Pressure pressure 6 kg/cm² Heating 13kW Total power 17.3kW 380V, 35Amp Dimensions: 3900x1800xH2100mm, weight 5900kg - Year: 1999 - Documentation available: No - CE certificate present: No - Serial number: 52850199 - Main motor power [kW]: 17.3 - Max. workpiece length [mm]: 2200 - Max. workpiece width [mm]: 800 - Max. workpiece height [mm]: 40 - Number of cylinders [pcs.]: 8 - Cylinder diameter [mm]: 100 - Total working pressure [Ton]: 160 - Working pressure [kg/cm²]: 6 - Heating boiler present: Yes Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, functionality: fully functional, For gluing stair treads - Hydraulic adjustment of the angled beam - Hydraulic cylinder with lateral ball bearing, adjustable, stroke 120 mm - Total and individual cylinder control Included in delivery: Press complete with all accessories: 4 hydraulic cylinders with 120 mm stroke, 1.8 t per cylinder, 3 cylinders can be switched off individually, 1 cylinder for adjusting the pressure beam, control panel for two operations, pressure gauge and pressure regulator, hydraulic unit, oil tank and hoses, - 220/380 Volt, - Pressing width 1800 mm - Pressing height 750 mm Hsdpfsygwp Usx Ab Uek - Pressure beam support 80 mm - Weight approx. 500 kg Transport available at extra cost!

Condition: used, functionality: fully functional, This listing is for a second-hand ‘Lotus LTS 14’ heat transfer press Hsdpfx Aeywtz Ajb Usk Item for sale: 1x Lotus LTS 14: Condition: This is a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested and is in working order Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Sea-worthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.

Condition: excellent (used), Hydraulic straightening press Brand: S.A.R.L. Constructeur Capacity: 90 t Maximum installation height: 1000 mm Stroke: 450 mm Hedpfx Abjywh Dfe Uek Table diameter: 600 mm Internal width: 1000 mm 380 Volt Year of manufacture: 2007 Transport dimensions: Length: 1600 mm Width: 650 mm Height: 2430 mm Weight: 900 kg

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, REF: MM5728 1 x Zumex Food Engineering commercial cold press juicer.  The Mastery represents Zumex’s cold press commercial system for all types of fruit and vegetable juices, leading the way with its crushing efficiency and power, thanks to its shredder discs and its Brushless motor. It also has a 11-ton press, which is more compact than any other press of its category to obtain quality juice. Technical specification ⚙️ ✅ Manufacturer - Zumex Food Engineering ✅ Model - MASTERY.  ✅ Serial number - 475186. ✅ Date of manufacture - 2021. ✅ Production capacity - from 30 L/h up to 110 L/H. ✅ Motor - Brushless. ✅ Deposit capacity - 3 litres. ✅ Dimensions - 940mm L x 735mm W x 1700mm H. ✅ Touch Control Display - 4.3" Colour. ✅ Material - INOX. ✅ Pression Power - 11,000 kg.  Hsdot Uim Hopfx Ab Uok ✅ Electrical requirements - 220-240 V / 50 hz / 1 phase. Notes 🗒️ Suitable for soft fruit, hard fruit, vegetable greens or a mix of those three products.  Videos available on request. 

Condition: used, Year of construction: 2003, operating hours: 67,092 h, functionality: fully functional, clamping force: 10,000 kN, screw diameter: 120 mm, displacement volume: 5,655 cm³, injection pressure: 1,632 bar, total length: 11,600 mm, total width: 2,900 mm, total height: 2,500 mm, overall weight: 76,500 kg, clamping force: 10000 kN distance between tie-bars h x v: 1120 x 1400 mm size of mould plates h x v: 1960 x 1690 mm min. mould height: 550 mm max. mould height: 1020 mm max. open daylight: 2120 mm opening stroke: 1100 mm screw diameter: 120 mm swept volume: 5655 ccm injection pressure: 1632 bar equipment included screen text german complact flash drive core pulling hydraulically 4x Anti vibration mounts electric interface for handling units according to Euromap 12 interface for temperature control units Hsdjywg N Topfx Ab Uok increased oil cooler mould heating 16x measures of machine l x w x h: 11.6m x 2.9m x 2.5m total weight: 76500KG

Condition: used, Year of construction: 1977, Pressure total: 800 ton Ram stroke: 700 mm Slide adjustment: 600 mm Shut height (stroke down, adjustment up): 1500 mm Free frontal opening L-R: 3800 mm Free lateral opening F-B: 1450 x 1100 mm Table surface area : 3500 x 1900 mm Slide area: 3500 x 1900 mm Die cushion capacity in table: 150 ton Die cushion stroke: 250 mm Hsdpfx Asyxmulob Usk Die cushion pad area: 2780 x 1570 mm Number of strokes: 7 - 18 s.p.m. Required power: 120 kW Height over floor approx.: 9510 mm Weight of machine approx.: 260 ton

Condition: used, #200103 Trumpf EVO22W10 (without identification groove) 86.00° R1.00 / H=100.00 / 500 kN/m Segment lengths: 2x 25 mm 2x 30 mm 1x 35 mm 2x 40 mm 1x 45 mm 2x 50 mm 7x 100 mm 2x 200 mm 2x 300 mm 7x 500 mm ----- #200104 Trumpf EVO22W10 (identification groove at the bottom) 86.00° R1.00 / H=100.00 / 500 kN/m Segment lengths: 2x 40 mm 2x 45 mm 2x 50 mm 2x 200 mm 1x 300 mm 3x 500 mm ----- #200105 Trumpf EVO22W10 (identification groove in the center) 86.00° R1.00 / H=100.00 / 500 kN/m Segment lengths: 3x 25 mm 2x 30 mm 2x 35 mm 2x 40 mm 2x 45 mm 1x 50 mm 4x 100 mm 2x 200 mm 2x 300 mm 8x 500 mm ----- #200107 Trumpf EVO26W24 86.00° R2.50 / H=100.00 / 700 kN/m Segment lengths: 1x 30 mm 1x 35 mm 1x 40 mm 1x 45 mm 1x 50 mm 3x 100 mm 1x 200 mm 1x 300 mm 4x 500 mm ----- #200108 Trumpf / Schmid EVO24W16 86.00° R1.60 / H=100.00 / 700 kN/m Segment lengths: 1x 25 mm 1x 30 mm 1x 40 mm 2x 45 mm 2x 50 mm 3x 100 mm 1x 200 mm 1x 300 mm 5x 500 mm ----- #200109 Trumpf EVO20W6 86.00° R0.60 / H=100.00 / 400 kN/m Segment lengths: 3x 100 mm 2x 200 mm (1x damaged) 6x 500 mm Hodpfx Abjyx Hxwe Uok ----- #200110 Trumpf EVO22/S-W10 86.00° R1.00 / H=100.00 / 380 kN/m Segment lengths: 1x 40 mm 2x 100 mm 1x 200 mm 1x 300 mm 4x 500 mm

Condition: good (used), Year of construction: 1990, pressure ca.10 t throat anpassbar mm stroke 250 mm table surface area 220 x 220 mm mm Hjdpsul Eawofx Ab Uok material diameter max. ca. Ø 267 mm total power requirement 1,5 kW weight of the machine ca. 430 kg dimensions of the machine ca. 899 x 772 x 1520 m

Condition: excellent (used), Year of construction: 1985, I sell hydraulic press MÜLLER HEP 10.20.35, year of production 1985. the press worked until the very end in bdb condition. Review of the press in 2023. Hsdpfxoudph Ie Ab Uok