Used Moulding Machine for sale (64,990)

Year of construction: 2014, condition: ready for operation (used), Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20. Dwodpsh Nypfsfx Ai Ejd

Year of construction: 2008, condition: ready for operation (used), A vertical injection moulding machine from ARBURG is offered. Clamping force: 50t, table size X/Y: 500mm/420mm, max. shot volume: 65cm³, min. opening width: 272mm (172mm), max. opening width: 522mm (422mm), hydraulic/pneumatic cascades: 2/4, hydraulic/pneumatic core pulls: 0/0, hydraulic operating hours: 6979h, automatic operating hours: 4696h, total cycles: 142609. Including shuttle table. Documentation available. Inspection possible by arrangement. Dwjdpfozta D Hjx Ai Esd

Condition: ready for operation (used), The injection momlding machine corresponds to the hydromechanical two-platen series, clamping force: 550t, operating hours: approx. 80h, with Handling Krauss Maffei KM 250/ LRX-S 250. An on-site inspection is possible, the machine is located in Mexico. Dodpfszrn Hmjx Ai Eswd

Year of construction: 1994, condition: ready for operation (used), A hydraulic Battenfeld plastic injection molding machine is offered. Clamping force: 1000kN, screw diameter: 40mm, shot weight: approx. 183g, mold mounting platens X/Y: 700mm/700mm, shot volume: 201cm³, max. injection pressure: 1968bar, max. screw speed: 290rpm, nozzle contact force: 79.2kN, machine cycles: approx. 1985087, operating hours: approx. 53578h, control system: Battenfeld UNILOG 4000. Dimensions: approx. 5440mm/1550mm/2300mm, weight: approx. 5060kg. Motor, pump and inverter renewed in December 2009. An on-site inspection is possible. Dwodjzl Enhopfx Ai Esd

Year of construction: 2005, condition: ready for operation (used), There are two BOY 55M available, both year of construction 2005. Clamping force: 550kN, screw diameter: 38mm, stroke volume: 196cm³, injection pressure: 2000bar, platen dimensions: 565mm/540mm, tie bar distance: 360mm/335mm. Workpiece height min./max.: 250mm/650mm, opening stroke: 400mm, max. platen distance: 1050mm, ejector stroke: 80mm, max. mold weight: 600kg. Dimensions X/Y/Z: approx. 3300mm/1200mm/2100mm, weight: approx. 2300kg, operating hours: 29664h, control: Procan MD. Robot interface Euromap 12 included. Djdstyaypopfx Ai Eewd

Year of construction: 2004, condition: ready for operation (used), Injection force: 113kN, closing force: 500kN, opening path: 50mm, weight: 4.4t, with documentation and software. Dwedsp S Srhspfx Ai Eed

Condition: repair required (used), Injection moulding machine, Engel ES 330/85, Used machine Dedpfx Aieukn S Hs Eowd As shown in the pictures, its working condition is uncertain. Overall dimensions :3100 x 1950 x 2600 mm Weight: 5500 kg Manufacturer: Engel Type: ES 330/85 Year of manufacture: 1997 Electrical data: 380V, 60 A, Contoller cards: Keba PS 244; Keba DO 321; Keba DO 321; Keba DO 321; Keba DI 325; Keba DI 325; Keba DI 325; Keba TT 081; Keba AR 181; Keba PD 242; Keba CU 211

Condition: ready for operation (used), Year of construction: 2001, General Data Measurements height 405 mm Dimensions Machine Length 405 mm Clamping Unit Clamping force 800 kN Dodpfxox D Ea Io Ai Ejwd This Krauss Maffei 80-220 C1 was manufactured in 2001. It features a clamping force of 800kN and a mold opening force of 55kN. The machine includes a robot, although it has a vacuum malfunction. Ideal for those looking to enhance their production capabilities in injection moulding. Contact us for more information about this machine. Application Types Injection Moulding

Condition: reconditioned (used), Year of construction: 2004, Krauss-Maffei KM 650-3500 C 1 650 tons Krauss-Maffei injection moulding machine from 2004 with 45.000 working hours in automatic-cycle. Machine will be delivered full checked tested and reconditioned by our team. Equipment: 6 neum. cscade, 24 hot runner zones, 1 core in fix platen, 1 core in moving platen, electrical screw-drive. Ask us for the start up service with warranty of working condition. Technical details CLAMPING FORCE 6.500 kN PLATEN SIZE 1.540 x 1.440 mm DISTANCE BETWEEN TIE BARS (h x v) 1.110 x 960 mm TRAVEL OPENING 1.150 mm DAYLIGHT MAX 1.750 mm SCREW DIAMETER 90 mm MIN. MOULD HIGHT 600 mm YEAR OF BUILDING 2004 INJECTION VOLUMEN 1.953 cm3 SHOTWEIGHT 1.777 grms INJECTION PRESSURE 1.742 bar This machine will be delivered complete checked, repaired and tested at our workshop and can be shown under power ! Dwedpfx Aohy Nnbsi Esd

Year of construction: 2005, condition: used, Max. locking force: 3500kN, clear tie-bar spacing: 710x710mm, min. mold height: 380mm, max. opening stroke: 1300mm minus mold height, max. ejector stroke: 250mm, max. ejector force: 95kN, ejector retraction force: 48kN, rotary table diameter: 890mm, screw diameter K1: 60mm, K2: 35mm, nozzle radius: 15mm, max. injection pressure K1: 2000bar, K2: 2429bar, max. shot weight (PS) K1: 618g, K2: 142g, hot runner: external, core pull connection: DNP Flatface BG3 (large flat-face sealing), centering mandrel: AS + DS, weight: 16.37t, total operating hours: 74,276h, production hours: 66,341h, the second injection unit and the rotary table have not been used for five years, with documentation and linear handling system, regularly maintained in-house. An on-site inspection is possible, the machine is not connected to power. Dwjdpfx Aszzqmnoi Eed

Year of construction: 2009, condition: used, Mains voltage: 400V, 3L+N, 230V, 3L, rated current: 7.5A at 400V, 11A at 230V, frequency: 50/60Hz, short-circuit breaking capacity: 3.5kA, weight: 370kg, an on-site inspection is possible. Dwsdpoz Da Rrjfx Ai Eod

Year of construction: 2005, condition: ready for operation (used), A total of four Engel injection molding machines are available. 1) Engel ES 80/25 HL-V, year of manufacture: 1999, the machine is a defective spare parts carrier. 2) Engel ES 80/25 HL-V, year of manufacture: 2001. 3) Engel VC 200/45 Tech, year of manufacture: 2004. 4) Engel e-Motion 200/55, year of manufacture: 2005. Documentation available. On-site inspection is possible. Individual sale possible. Dsdpfx Aiov Extzs Eowd

Condition: excellent (used), Year of construction: 1993, Battenfeld Dwsdpfxer Nf Rte Ai Ejd BK-T 2500/1250 Closing 250 TO Year 1993 Scrow 60 mm distance between tie bars 63x56

Year of construction: 2008, condition: used, Clamping force: 650kN, length: 4000mm, width: 1600mm, height: 2200mm, weight: 3.9t, an on-site inspection is possible. Dodpfx Aiszybvko Eowd

Year of construction: 2007, condition: ready for operation (used), A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen spacing: 750mm, tie bar spacing X/Y: 420mm/420mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1700mm/2100mm, weight: approx. 3500kg. Documentation available. On site inspection is possible. Dwjdpfx Ajyddzloi Ejd

Condition: used, 1.0 piece. Nozzle for injection into the parting line. Manufacturer: ARBURG For machine models 270. Dwodpfx Ajzxtcyji Ejd

Condition: used, Wittmann Battenfeld 3 Vertical V 800/315 injection molding machines for thermoplastics Type: Vertical V 800/315 Design: Vertical Control system: Battenfeld UNILOG B4 Clamping force: 800 kN Injection unit: 315 Screw diameter: 40 mm Calculated displacement volume: 201 cm³ Maximum shot weight: approx. 183 g Specific injection pressure: 1,575 bar Clear tie bar distance: 370 x 420 mm Minimum mold height: 200 mm Maximum opening stroke: 300 mm Machine weight: 3 x approx. 5,500 kg Machine dimensions: approx. 2,917 x 1,423 x 3,643 mm Documentation and technical documents available Condition: used Disassembly and collection must be carried out by the buyer. Dwodpezpwrgsfx Ai Esd Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Year of construction: 1999, condition: ready for operation (used), Installation height min./max.: 250mm/750mm, opening stroke: 500mm, clamping force: 1500kN, screw diameter: 40mm, distance between tie bars: 420mm, injection volume: 182cm³, operating hours: 98234h. Documentation available. On-site inspection is possible. Dodpfx Aijt E Trho Ejwd

Year of construction: 2002, condition: ready for operation (used), Max. Press force: 1000kN, max. retraction force: 110kN, max. stroke: 360mm, max. working pressure: 251bar, installation height: 560mm, control panel: Siemens SIMATIC OP27, weight: 7.5t, on-site inspection is possible. Djdpfx Aijum U S Eo Ejwd

Condition: good (used), Year of construction: 2008, For sale is an injection molding machine from Krauss Maffei, type KM 110-380. The machine is in good to very good condition; all maintenance and inspections have been carried out. Technical data: Year of manufacture: 2008 Extended tie bars Dwedpfx Aijibyatj Eed Pneumatic nozzle shut-off 2x hydraulic core pull 31,000 operating hours Cylinder diameter: 35 mm Clamping force: 1100 kN Mold opening force: 70 kN Euromap63 interface for version > 1-04-09 Nitrogen accumulator available Included components: Wedge shoes with screws and nuts Double-end wrench Declaration of conformity for the complete control cabinet Certificate USB memory stick Ejector coupling – mechanical, included in the control cabinet All prices are plus VAT. Machine buying and selling BUYING / SELLING PRODUCTION & METALWORKING MACHINES, AMONG OTHERS. Do you need a high-quality, but affordable, metalworking machine for your production? Or would you like to sell yours? For more information or to contact us, please visit our website.

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1700x860x850 mm Weight 190 kg Dwedpfx Ajvz Hzlei Esd Total power requirement 1,5 kw

Condition: used, Clamping force: 800kN, an on-site inspection is possible. Dwedpfjzyq S Isx Ai Esd

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1700x660x850 mm Weight 180 kg Dwedpfxevz Hzfo Ai Esd Total power requirement 3 kw

Year of construction: 1999, condition: ready for operation (used), Ejector stroke: 180mm, ejector force: 44kN, nozzle contact pressure: 38kN, hopper capacity: 75dm³, mold clamping force: 1962kN, mold opening stroke: 560mm, length: 6275mm, width: 1520mm, height: 1965mm, weight: 8.3t. An inspection on site is possible. Dsdpfxoy Sncqo Ai Eswd

Condition: ready for operation (used), Year of construction: 2011, operating hours: 32,000 h, functionality: fully functional, clamping force: 2,100 kN, screw diameter: 50 mm, clearance between the columns: 580,580 mm, injection weight: 402 g, opening stroke: 690 mm, installation height: 340 mm, Incl. Geiger robot Midiliner F 10.0 year 2011, Conveyor and safety cage Djde Aarbbjpfx Ai Eewd