Used Mounting Press for sale (33,199)

Condition: good (used), Year of construction: 2000, operating hours: 28,155 h, functionality: fully functional, Baler Paal Konti 200 D, year of manufacture 2000, optionally available with matching Paal KEM-1400 conveyor belt Psdjx Iritepfx Agzerf Technical specifications: Manufacturer: Paal Model: Paal Konti 200 D Year of manufacture: 2000 Operating hours: 28,155 Pressing force: 60 t Drive power: 45 kW Total connected load: 60 kW Feed opening: 1020 x 1400 mm Bale size: 750 x 1100 mm, variable length Tying: fully automatic with 4-fold wire Throughput: at 35 kg/m³: approx. 9.5 t/h at 60 kg/m³: approx. 16.5 t/h at 100 kg/m³: approx. 26 t/h Bale weight: 450 to 650 kg Transport dimensions: approx. 10,123 x 2,152 x 2,720 mm (LxWxH) Machine weight: approx. 15,000 kg Materials: Paper, cardboard, film The baler was dismantled from running operation. Complete documentation available. Please note: All technical data is based on manufacturer information. We assume no liability for the stated data or for potential errors. The offer is subject to change, prior sale and revocation at any time. Inspections are possible by appointment. Sale takes place ex works, prepayment, without warranty or guarantee.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Briquetting press for wood or wood-like materials Throughput: up to a maximum of 100 kg/h Briquette: 60 mm cylindrical Motor: 7.5 kW Dimensions: approx. 2150 x 1700 x 1400 mm Container size: 1400 x 1400 x 920 mm Optional: Extraction system available as a hopper attachment. Requirements: Input material should ideally be shorter than 25 mm chip length Moisture content: 6-12% (oven-dry basis) Machine suitable for intermittent operation. For example, up to 2.5 hours briquetting; 1 hour pause, etc. If the machine is to operate continuously for longer than 2.5 hours at a time, an optional cooling system must be connected. Predpfxjw Hpizs Agzsf

Condition: excellent (used), Catalogue number 7811 TECHNICAL DATA - Compression force: hydraulic - Briquette shape: round - Briquette diameter: 60 mm - Hopper diameter: 990 mm - Throughput: approx. 70 kg/h - Automatic machine operation - Inspection window - Motor: 5.59 kW - Max. operating pressure: 150 bar - Dimensions (L/W/H): 1700x1350x1550 mm Prodpexxlb Uefx Agzof - Weight: approx. 1100 kg ADVANTAGES – Italian manufacture – Used briquetting press – Inspection window – Very good condition Net price: 35,900 PLN Net price: 8,550 EUR based on an exchange rate of 4.2 EUR (Prices may change due to exchange rate fluctuations)

Condition: used, L 5990 mm, W 2500 mm, H 2700 mm. Weight 4451 kg Pjdpfsvkn Irsx Agzjrf

Condition: used, Total height 6500 mm Floor space 2000 x 2000 mm Outdoor installation Compact filter series Model PKFP – 1 element – 1.92 x 1.92 Shaking filter Overpressure operation Filter hose length 2500 m long – 180 mm diameter - then 105 m2 filter area 2 raw air fans – 2 pipes (diameter 300 mm) 1 x fan KT 300, 15 kW power 6361 m³/h built in 1999 1 x fan S 25 / 300, 7.5 kW power 7400 m³/h, built in 1993 1 x transport fan 6.1 kW, power 57 m³/min, built in 1996 Total approx. 14,000 m3/h volume flow Briquette press Höcker Polytechnik type BrikStar C 3 - 12. 1225 Motor 3.0 kW, briquette diameter 65 mm, output approx. 40-45 kg/h depending on the specific weight of the material. Storage location: Nattheim Pedpfjvviytox Agzorf

Condition: used, Veneer Press OTT JU 90 -used- ----- Technical Specifications ----- Pjdswmmrajpfx Agzorf Pressing area: 2,550 x 1,350 mm, Power per heating plate: 9100 W, Number of cylinders: 4

Condition: good (used), Year of construction: 2018, operating hours: 40,350 h, functionality: fully functional, Baling Press Presona LP 85 VH2 with Cross Tying, Year of Manufacture 2018 Technical Specifications: Manufacturer: Presona Sweden Model: LP 85 VH2 Year: 2018 Predpfxox Irigj Agzjf Drive Power: 2 x 45 kW Operating Hours: 40,350 Effective Operating Hours: Approx. 22,000 Pre-press Force: 28 t Main Press Force: 85 t Feed Opening: 1500 x 1100 mm Bale Dimensions: 750 x 1100 mm Bale Weight: 450–650 kg Theoretical Throughput Volume: 1,200 m³/h Throughput Capacity at 30–100 kg/m³: 13–30 t/h Tying: 5-fold vertical, 3-fold horizontal Oil Tank Capacity: 2,000 L Press Transport Dimensions: 10,400 x 2,400 x 2,800 mm (LxWxH) Weight: Approx. 27,000 kg The press was removed from ongoing operation. A spare parts package is included in the scope of delivery. Technical documentation is available. Please note: All technical data refer to the manufacturer’s information. We do not assume liability for the specifications provided or for any errors. The offer is non-binding, subject to prior sale, and may be revoked at any time. Viewings are possible by appointment. Sale only by advance payment, ex works, without warranty or guarantee.

Condition: new, Year of construction: 2025, operating hours: 9 h, Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Options for an extra charge: * Surcharge for the level indicator that enables automatic operation + € 995 net * Surcharge for large pre-compression chamber + 980 € (recommended for light material like straw) Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max .: 40 mm Briquette lift opt ​​.: 40 mm Throughput (depending on material): 30-60 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Podpfxegl Nlme Agzjrf . Motor power: 5.5 kW 400 volts / 50 Hz / 3 phases Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo content: approx. 0.7 square meters Pump: 27 liters Hydraulic pre-compressor Option cooling pressing tongs: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The customer must insure himself against loss of hydraulic oil - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: used, Year of construction: 2002, pressing force: 880 t, lifting height: 305 mm, SLIDE Psdpfx Ajx Nd Udogzerf .. total force (nominal): 880 to .. stroke: 305 mm .. cutting velocity min.: 5 mm/s .. cutting velocity max.: 70 mm/s .. closing velocity: 200 mm/s .. returning velocity: 200 mm/s V-RING .. nominal force: 400 to .. stroke: 40 mm COUNTER RAM .. nominal force: 200 to .. stroke: 40 mm TOOL DIMENSIONS .. lower table (left-right): 1010 mm .. lower table (front-back): 1600 mm .. upper table (left-right): 1000 mm .. upper table (front-back): 1000 mm .. shut height max.: 460 mm STRIP-FEEDER .. feeder type: roll feeder .. sheet width max.: 450 mm .. sheet thickness max.: 16 mm .. feeding step min.: 1 mm .. feeding step max.: 999.9 mm .. sheet length min: 3950 mm .. speed max.: 48 m/min .. Vertical adjustment: 140 mm .. nominal force: 60 kN ELECTRICAL SPECIFICATIONS .. total power consumption: 188 kW .. main drive power: 160 kW ATTACHMENTS -FINEBLANKING PRESS- .. autom. tool clamping device: yes .. closed cabin: yes .. decoiler: no .. leveller unit: no .. waste cutter: yes

Condition: used, Dimensions: L 6990 mm, W 2500 mm, H 2720 mm. Weight 4191 kg. Tipping device for 140-660 l containers Predpfxjvkn Nvj Agzef

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Storage location: Nattheim Prjdpfevvkmbox Agzjf

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Predpju R Sxxjfx Agzof Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -

Condition: reconditioned (used), Year of construction: 2009, operating hours: 15,350 h, functionality: fully functional, Europress EP 6500 V5 H4, Cross Tying, Year of Manufacture 2009 Technical Specifications: Manufacturer: Europress Model: 6500 V5 H4 Year of Manufacture: 2009 Operating Hours: approx. 15,334 hours Number of Bales: 138,097 bales Main Press Force: 120 t Specific Press Force: 142 kg/cm² Feed Hopper Dimensions: 1,650 x 1,100 mm Filling Volume: 3 m³ Filling Volume per Press Cycle: 1.58 m³ Bale Dimensions: 730 x 1,100 mm Drive Power: 75 kW (1 x 30 kW + 1 x 45 kW, individually switchable) Total Connected Load: 83 kW Current Consumption: 150 A Tying: 5-fold vertical, 4-fold horizontal, fully automatic Bale Weight: 450–900 kg Hydraulic Tank Capacity: 1,200 L PLC Control: Siemens S7-200 Control Panel: Siemens Touchscreen Press Dimensions (assembled with hopper): 13,465 x 5,200 x 5,074 mm Transport Dimensions Press: 9,965 x 2,500 x 2,900 mm (L x W x H) Press Weight: approx. 28 t Work Carried Out on the EP 6500 V5: - Completely derusted and repainted - Inner steel floor of the press completely renewed - Ram (steel structure) overhauled - Complete overhaul of the horizontal and vertical lance boxes - Complete renewal of internal Hardox wear plating - All hydraulic hoses new - Both hydraulic cylinder lifters renewed - Knives and counter knives replaced - All hydraulic cylinders resealed and tested - All slide and guide plastics replaced - Wire deflection pulleys renewed - Replacement of various cables and sensors - Replacement of various electrical components (control cabinet) - Complete inspection of electrics/control system - Complete hydraulic pressure inspection Remarks: The machine has been overhauled, inspected, and tested by us. You can find the video on our website or YouTube channel. Inspections, including powered tests, are possible at any time by prior arrangement. If you have any questions regarding the machine, we are happy to assist you by phone Monday to Thursday from 08:00 to 14:00, and Friday from 08:00 to 13:00. Please note: All technical data is based on information provided by the manufacturer. We do not accept liability for the accuracy of the information or for possible errors. Offers are subject to change, prior sale, and withdrawal at any time. Prodpfxex Irh No Agzjf Inspections are possible by prior arrangement. The sale is ex location, without any warranty or guarantee.

Condition: good (used), Clamping plate, plate field, welding table, welding table, plate boring mill, straightening plate, tool holder -with: drill holes -Width: 395 mm Podpsd R Ak Eefx Agzorf -Length: 495 mm -Height: 30 mm -Weight: 53.5 kg

Condition: used, Year of construction: 1994, pressing force: 200 t, table length: 1,780 mm, PRESS DESIGN .. drive system: eccentric / crank .. frame design: H-frame, tie rod .. openings in uprights: yes .. table cushion: yes .. feedstock transport direction: left to right PRESS FORCES .. total force (nominal): 200 to PRESS TABLE .. table surface (left-right): 1780 mm .. table surface (front-back): 1300 mm .. opening in bed (left-right): 1445 mm .. opening in bed (front-back): 260 mm SLIDE .. slide force: 200 to .. table surface (left-right): 1500 mm .. table surface (front-back): 1100 mm .. stroke: 178 mm .. stroke rate (max.): 120 /min SLIDE (MECHAN. PRESS) .. slide adjustment: 150 mm .. stroke rate (min.): 20 /min .. stroke rate (max.): 120 /min DIE CUSHION (TABLE CUSHION) .. number of cushions: 11 .. cushion force: 3 to TOOL ASSEMBLY DIMENSIONS Prodjx Nd T Tspfx Agzef .. shut height (stroke down, adjustment up), BDC: 542 mm .. passline opening (free passage in side columns): 900 mm DECOILER .. design: twin reel .. sheet width max.: 260 mm .. coil weight max.: 2 to .. max. diameter of coil: 1500 mm .. mandrel expansion range from: 460 mm .. mandrel expansion range up to: 530 mm LEVELLER UNIT .. sheet width max.: 250 mm .. sheet thickness max.: 2 mm .. sheet thickness min.: 0.3 mm .. number of leveller rolls: 19 .. diameter of leveller rolls: 18 mm .. feed velocity min.: 5 m/min .. feed velocity max.: 60 m/min .. loop controls: yes STRIP-FEEDER .. feeder type: roll feeder .. sheet width max.: 250 mm TRANSFER SYSTEM .. distance between tools, stroke X max.: 260 mm .. distance between tools, stroke X min.: 60 mm .. stroke Y fix: 55 mm .. Inner width clamping rails closed max.: 455 mm .. Inner width clamping rails closed min.: 205 mm ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz ATTACHMENTS (PRESSES) .. decoiler: yes .. leveller unit: yes .. strip feeder: yes .. gripper transfer system: yes + Coil feed line KOHLER with straightener KRE2 18.260/19 + Feeder KAISER KWV 250 + 2-axis gripper bars transfer SANDER with adjustable pitch + table cushion rail with various cushions and fillers (separate data sheet available)

Condition: excellent (used), Year of construction: 1952, Robust workshop machine with character – manufactured in the renowned German factory A. Nothelfer & Söhne Ravensburg. Year of manufacture: 1952, but still fully operational, complete, and ready to work! - Siemens-Schuckert Motor • Power: 0.8 kW • Speed: 1,400 rpm • Power supply: 3-phase 220/380V • Current: 3.5/2 A • Frequency: 50 Hz • Cos φ: 0.8 - Technical condition • Fully mechanically operational • Belt drive with three-phase motor • New supporting frame with mounting holes • Foot pedal control • Electrical inspection recommended (older visible power system) - Additional information Pedpfxsw E I Sfe Agzjrf • Original nameplates • Type designation illegible, but identified by factory serial number 134058 • Work table with slots for fixture mounting • Solid, heavy construction – built for decades of use • Weight: 480 kg - Applications: stamping, punching, cutting, bending metal parts – ideal for the workshop, forge, tool production, or for an industrial machinery collection.

Condition: used, Year of construction: 1992, Dimensions: 5700 x 1300 x 2400 mm Pedpfxovvkl Ds Agzerf Storage location: Nattheim

Condition: used, Year of construction: 1988, stroke 16-140 mm pressure 75 t Predpfx Agsx H Txyozjf weight 4,6 t

Condition: good (used), Lechner IV B Hydraulic Bookbinding Press The machine is ready to operate. The press has a built-in hydraulic unit. Psdsx N D Spopfx Agzerf Four stations. Irreplaceable in bookbinding for the production of books, pads, etc.

Condition: good (used), Clamping plate, welding table, welding table, marking plate Prsdpsb A Nqgefx Agzsf -Width: 450 mm -Length: 400 mm -Height: 50 -with fitting bore and threaded holes: M12 (threaded insert M16 x 1.5) -Weight: 60 kg

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, pallet changer -comes from a CNC machining center MAHO type MC 600 -Width: 500 mm -Length: 500 mm -Height: 180 mm Predpfsb A Hy Usx Agzsf -with supporting ribs -Groove width: 14 mm -Number: 1 table available Price: per piece -Weight: 200 kg/piece

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, plate boring mill -Width: 1100 mm -Length: 2250 mm -Height: 200/100 mm Pjdjb A Nv Iepfx Agzerf -Working height: 820 mm -with supporting ribs -Groove width: 24 mm -Weight: approx. 2000 kg

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, pallet changer Prjdjb A Ilwjpfx Agzjf -comes from a CNC machining center MAHO type MCV 600 -Width: 500 mm -Length: 500 mm -with supporting ribs -with Span Index -Weight: 115 kg

Condition: good (used), Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Dimensions: 1000/600/H400 mm Prsdjb A Rpkjpfx Agzjf -Groove: 45 mm -Weight: 700 kg

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, plate boring mill -Width: 190 mm -Length: 300 mm Prjdpjb A Nn Ijfx Agzsf -Height: 240 mm -Table: 140 x 300 mm -Groove width: 14 mm -Weight: 24 kg