Used Newton 25 for sale (14,994)

Condition: ready for operation (used), * Brand: Metso Ijdpfx Aszd Uz Isbvjth * Type: FS 403 , for dry screening * Surface: 6000 x 2500 mm - 3 decks. * Incl.: 55 kW E-motor and outlet trough. * On stock: 1 piece.

Condition: used, Year of construction: 1996, faceplate diameter 600 mm Iedszfax Uopfx Abvjth carrying capacity max. 250 kg dimensions ca. 800 x 910 x 1200 mm faceplate turning speed range -stepless- 0,2 - 2 U/min dimensions ca.1200 x 800 x 1150 mm weight of the machine ca. 300 kg Faceplate diameter: 600 mm Faceplate bore: 150 mm Bison spiral face chuck diameter: 500 mm Spiral face chuck bore: 190 mm Table height in horizontal position: 910 mm Faceplate speed, electrically adjustable in a continuous range: 0.2–2 rpm Welding current transfer: 300 A

Condition: used, Year of construction: 1995, turning diameter 450 mm turning length 1.125 mm control FANUC MSC 518 turning diameter over bed 520 mm bar material dia. 70 mm x-axis 260 mm z-axis 500 mm spindle tunring speed 30 - 3.000 U/min spindle nose JIS A2-8 spindle bore 80 mm spindle bearing diameter 130 mm Number of tools in turret 12 rapid travel - longitudinal/face 15 m/min power capacity 15/11 kW total power requirement 42 kW weight of the machine ca. 5 t Ijdpfx Abexr Rbyeveth dimensions of the machine ca. 3,6 x 1,7 x 1,8 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - LG 10 portal loading system with workpiece stacking device up to D=200 and max. 10 kg - Kitagawa 250 mm power chuck - Hollow clamping device - Chip conveyor - High-pressure cooling 5 bar - Tailstock Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 1995, x-travel 650 mm y-travel 410 mm z-travel 410 mm Control Mitsubishi Meldas 50 M max. turning speeds 6.000 min/-1 tool taper SK 40 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Itjdpsx Iwg Rsfx Abveh Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: excellent (used), Here we offer a Leybold Trivac oil-sealed vacuum pump. Leybold Trivac oil-sealed vacuum pump with exhaust filter. Leybold TRIVAC D 25 B oil-sealed vacuum pump. Itsdezdqq Ejpfx Abvoh 2.5 x 10⁻³ mbar Pumping speed (50 Hz): 25.7 m³/h Pumping speed (60 Hz): 30.8 m³/h Exhaust filter with oil return ARS 16-25 Type: D 25 B Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data and specifications!) We will gladly answer any further questions you may have over the phone.

Condition: used, Technical details: bore capacity in steel (diameter): 25 mm throat: 310 - 315 mm bore stroke: 200 mm spindle taper MT: MK4 spindle speed:: 63 - 1000 U/min Distance spindle/table max.: 670 mm Itjdpfszfiy Uox Abvsh table clamping surface:: 640 x 540 mm table rotating: 360 ° current- max.: 7 A total power requirement: 3 kW weight of the machine ca.: 700 kg dimension machine xH: 0,9 × 0,6 × 2,46 m

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, nominal power (apparent): 36 kVA, controller manufacturer: MATSUURA, controller model: G-TECH 840 DI, total height: 3,500 mm, total length: 6,000 mm, total width: 5,000 mm, overall weight: 15,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, mount diameter: 40 mm, tool length: 300 mm, tool diameter: 80 mm, tool weight: 10,000 g, input voltage: 415 V, input frequency: 50 Hz, input current: 50 A, Equipment: chip conveyor, MATSUURA MAM 72-25 V CNC Universal Machining Center - Tool holder: SK 40 - B-axis travel: -110°/+110° Itedoy I Sfhepfx Abvoh - C-axis travel: 360° - Distance between pallet surface and spindle reference line: -20 to 430 mm - Distance between B-axis center and spindle reference line: 4 - 410 mm - Distance between B-axis center and spindle reference line: -10 mm - Distance between pallet center line and bed 0-point: 265 mm - Distance between pallet center line and Y 0-point: 180 mm - Internal diameter of the spindle bearing: 70 mm - Tool clamping force: 7.0 kN - Feed rate B-axis: 30/min - Feed rate C-axis: 50/min - Max. tool diameter: 80 mm, with free secondary stations: 150 mm The machine is equipped with a chip conveyor and a coolant system. Note: includes the tool holders located on the tool changer! Note: the machine can be transported on a truck up to 2700 mm wide! Note: the item must be picked up between August 24 and August 27, 2026, on a date to be determined. FCA D-61352 Bad Homburg - loaded onto a truck.

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Storage location: Nattheim Itedpfxoyi A Tdo Abvjh

Condition: used, Year of construction: 2007, Working area: 2780 x 1140 mm (vertical milling) 2500 x 950 mm (horizontal drilling) X-Y travel: 2980 x 1271 mm Z-axis travel: 200 mm Passage height: 180 mm The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. On this mobile unit carrier, the working unit is mounted on prismatic, ground guides and the recirculating ball slide. Description of the units and accessories (basic) Drilling unit: Drilling head with 10 + 4 spindles · 6 individually accessible vertical spindles in X · 4 individually accessible vertical spindles in Y · 2 horizontal spindles in X (1 + 1) · 2 horizontal spindles in Y (1 + 1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M 10 with 11 mm fitting · Extraction nozzle: D = 160 mm Vertical milling unit (position 2) · Tool chuck HSK 63F · Speed 1,500 - 24,000 rpm continuously adjustable via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Right-hand / left-hand rotation · Ceramic bearings · Scope of delivery: 4 tool chucks (right) without collet chuck · Tool changer · Side-mounted tool magazine 7-way (TR7) with full encapsulation to prevent chipping · 7 tool positions for HSK 63F tool holder arranged in a row · maximum tool diameter D=120 mm · maximum weight per holder 4.5 kg · maximum tool weight of all tools 20 kg (TR7) · angular gears can be accommodated Horizontal milling unit (position 1) Horizontal unit with two opposite outputs for milling and grooving. · Speed 9,000 - 18,000 rpm continuously variable via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) · Motor power 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Bore saw blade (ER 32): 50 mm · Mandrel diameter saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum freedom of movement. The vacuum quick clamping system ensures maximum flexibility with precise positioning and optimal grip of the workpieces. · 4 supports 900 mm continuously adjustable in X · 8 vacuum suction cups round D = 110 mm continuously adjustable in Y (2 per support) · 2 stops in X (1 x left / 1 x right) · 1 stop in Y per support (total 6) · The retractable reference stops are controlled via CNC. · Scope of delivery: 4 plug-on adapters for suction cups · Pendulum machining standard (2 working areas) Axis movement The drive system in X, Y and Z is carried out via ground ball screws of the highest precision class. The ball drive screw of the X-axis is located exactly in the center Iedpfx Abex Twdyevsth

Condition: excellent (used), Claw jaws Make Schunck type SZA 25 - 30 Iedjg Ny Iyspfx Abveth weight 3 kg

Condition: used, Year of construction: 2018, Manufacturer : SPXFLOW Lightnin Model : HP-25 A Year: 2018 Type : Stirrer Diameter of the stirring blade: 110 mm Length of the stirring shaft: 825 mm Shaft diameter: 12.5 mm Required pressure: 6 bar Ijdozcznyjpfx Abvjth Manual pin-type lifting system Lifting stroke: 36 cm Maximum width of a container: 72 cm Dimensions: floor to >mixing head (lower position): 55 mm Dimensions: floor to >agitator head (top position): 415 mm Dimension : 110 x 103 x 150 cm Technical documentation available

Condition: used, Year of construction: 2018, operating hours: 18,735 h, lifting height: 4,870 mm, free lift: 1,620 mm, fuel type: electric, mast type: triplex, fork length: 1,190 mm, fork width: 1,150 mm, total height: 2,260 mm, total length: 2,320 mm, total width: 1,190 mm, color: silver, Empty weight: 4.651 kg Lifting capacity: 2.500 kg - Year: 2018 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 516345J00644 - Operating hours: 18735 - Lifting capacity: 2500kg - Lifting height: 4864mm - Overhead clearance: 2260mm - Free lift: 1620mm - Fork length: 1190mm - Maximum fork width: 1150mm Isdpfx Aozcyzlsbveth - Minimum fork width: 200mm - Number of wheels: 4 Wheels - Attachment: Side-shift, Fork positioner - Options: Full cabin, Joystick, Free-lift, Work lights - Mast: Triplex - Drive: Electric - Battery information: - └ Brand/Type: 4 PzS 620 - └ Battery year of construction: 2019 - └ Capacity: 620Ah - └ Battery voltage: 80V - Transport dimensions: 2328mm x 1199mm x 2260mm (l x w x h) - Transport weight [kg]: 4651kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Hydraulic press brake LVD PPEB-EQ 80/25 CADMAN CNC Year of manufacture: 2006 Serial number: 30734 Technical specifications Pressing force: 800 kN Working length: 2,500 mm Distance between uprights: 2,050 mm Stroke: 200 mm Distance table – ram: 400 mm Gap: 400 mm Table width: 150 mm Approach speed: 130 mm/s Working speed: 11 mm/s Return speed: 115 mm/s Weight: 6,200 kg Itsdpfoy Avnpsx Abveh Motor: 7.5 kW Control CADMAN CNC, 6 axes • Back gauge X-mono-R-Z1-Z2 • LVD style upper tool

Condition: good (used), Code: 0414 Brand: SCM MINIMAX Itodpfx Abezfapmeveh Model: ME 25 - CE Standard Automatic edge bander for joinery, furniture, custom-made furniture, panels, doors, kitchens and various – CE Standard – Year 2017 Technical data: Thickness of roll edge 0,4–3 mm Max edge thickness 5 mm Min/max panel height 12/50 mm Panel feed speed 7 mt/min Work surface height 904 mm Min panel length/width 190/65 mm High-grip toothed feed belt Panel support roller conveyor along the entire length of the machine Composition: Gluing unit: Glue tank capacity 1 kg – Motor power 0,18 Kw End cutting unit: Motor power 0,37 Kw – End trimming blade diameter 90 mm Z 20 – Blade rotation speed 12000 rpm Overlapping trimming unit: Upper and lower motor power 0,75 Kw – Vidia cuttersn diameter 75 mm Z 4 – Cutter rotation speed 12000 rpm Edge scraper unit for finishing Pvc/Abs edges Glue scraper unit for removing any excess glue Suction inlet diameter 120 mm Overall dimensions mm 1950 x 700 x 1250 h Weight kg 430

Condition: excellent (used), CTS Temperature Test Chamber T-40/25 Technical Data Manufacturer: CTS Clima Temperatur Systeme Type: T-40/25 Temperature Range: -40 °C to +180 °C Test Chamber Volume: 25 liters Temperature Change Rate: Heating: 8.0 K/min Cooling: 6.5 K/min Temperature Deviation over Time: ±0.5 to ±1 K Test Chamber Dimensions (W x D x H): 350 x 240 x 300 mm External Dimensions (W x D x H): 595 x 580 x 860 mm Electrical Data: Rated Voltage: 230 V 1/N 50 Hz Rated Power: 1.86 kW Rated Current: 8.53 A Protection Class: IP20 Refrigerant: R404A Filling Quantity: 0.8 kg Operating Pressure: 25 bar Test Pressure: 20 bar Features: LCD control panel Digital setpoint/actual value display RS232 interface Stainless steel test chamber material 1.4301 Window 200 x 200 mm Lockable door Air-cooled refrigeration unit EASYLog data logger 3 stainless steel shelves Weight: approx. 90 kg For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. Documented test run after successful inspection Condition: used Scope of supply: (See picture) Inspection possible by appointment. Loading can be arranged. (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone. Itodpfozcxmtox Abvoh

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 5 h, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: diesel, mast type: triplex, power: 36 kW (48.95 HP), fork carriage width: 1,470 mm, fork length: 1,200 mm, empty load weight: 4,350 kg, total length: 3,084 mm, drive type: Diesel, construction width: 1,350 mm, Rough terrain forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Hydrostatic Speed class: 20 Condition: New Technical condition: very good Itodpezc Samsfx Abvoh Front tire type: Pneumatic Front tire size: 300-15 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 7.00-12 Rear tire condition: 80 - 100% Description: The MSI 25 is a versatile mast forklift and unique in its class. It can be used in the wood and paper industry, in recycling, in logistics applications, etc. Whether in industrial buildings, in the yard, or on light terrain, the hydrostatic transmission, combined with the powerful engine and two large-diameter drive wheels, enables precise and smooth operation. This machine ensures daily productivity gains. For efficient maneuvering, the MSI 30 features a steering axle with an integrated cylinder, giving it a very small turning radius. Thanks to the numerous available attachments, the MSI 30 is extremely versatile and suitable for lifting, loading, unloading, and storing long loads. It has a lifting capacity of 3.0 t. Side shifter, 3rd valve, half cab, full cab, full free lift, CE certificate.

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Equipment and technical data: - Motor 15 kW - 400 V - 3000 rpm - Dust extraction port diameter 250/300 mm - Dimensions: approx. 900 x 750 x 1000 mm - Weight: approx. 190 kg Itedezdlwgjpfx Abvoh Availability: short-term Location: 63934 Röllbach

Year of construction: 2025, condition: excellent (used), functionality: fully functional, We offer an unused single-screw extruder from stock. The system was operated exclusively for test purposes and is therefore in excellent, near-new condition. Ideal for laboratory use, material development, small-scale production, or custom extrusion applications. Isdpfexxim Isx Abvsth Technical Data & Features • Screw diameter: 30 mm • L/D ratio: 25:1 • Condition: unused / only test runs • Drive: 4 kW SEW motor with gearbox • Heating zones: 4 zones with temperature controllers • Control cabinet: included in scope of delivery • Die: strand die can be adapted or manufactured new upon request • Design: robust laboratory / pilot-scale construction • Mobile: base plate with heavy-duty castors – easy to position Special Features • Very compact design • Ideal for filament, profiles, lab trials and material testing • Barrel and screw in excellent condition (see photos) • Immediately available from stock

Condition: new, GMN for Schaudt Mikrosa TSE 70 c x 25 TSE 70c - 25/8 spindle SN: 385706, unused in opened original packaging, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Itedenri Euopfx Abveh

Condition: ready for operation (used), Bosch SM 25/50-C servo module SN:416106, used, minor signs of wear, 100% functional, scope of delivery as per photos Isdpfeldlr Uox Abveth

Condition: ready for operation (used), Bosch SM 25/50-TA servo module 1070077376-107 SN: 002359561, used, good condition, 100% functional, delivery scope as per photos. Isdpfx Asx Eqyxjbvsth

Condition: ready for operation (used), Bosch SPM 25 spindle module SN:305445, the spindle module has been overhauled by the manufacturer, used, normal signs of use, 100% functional, scope of delivery as per photos Iedpfei D Uf Tox Abvjth

Condition: ready for operation (used), Bosch SPM 25 spindle module SN:349005, used, normal signs of wear, 100% functional, scope of delivery as per photos. Itsdpfsx Eqy Sjx Abvoh

Condition: ready for operation (used), WEG W22 motor with Karl Klein DNG 6-25/TS-300°C fan SN: 1612-302113, used, in good condition, fully functional, scope of delivery as per photos. Iodpox Dwinjfx Abvsth

Condition: ready for operation (used), Pull tube for tensioning device from IKEGAI TURN 25 , length tube: 730 mm, Ø 75 mm, hydraulically operated, used, normal signs of wear, 100% functional ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please inquire for charges for packing and transport separately! Ijdjy T Dqyjpfx Abvsth