Used Nh 5000 for sale (3,716)

Condition: good (used), machine/vehicle number: 48506457063766, Year of construction: 2018, operating hours: 3,314 h, load capacity: 3,500 kg, lifting height: 5,000 mm, overall weight: 5,000 kg, enginetype: Electric, manufacturer: Toyota Nwedpfx Aow Ry Hqsg Ioc

Condition: defective spare-parts repository (used), functionality: not functional, empty load weight: 1,400 kg, overall weight: 3,500 kg, total length: 7,800 mm, total width: 2,100 mm, total height: 2,560 mm, tire size: 185R14 102J, trailer brake: trailer braked, Year of construction: 1992, Sale as 'DIY trailer' due to defect. Nwjdpeyk Da Isfx Ag Isc Defect: Tow bar is bent Status: deregistered

Condition: reconditioned (used), Modernized machine with new LTG StoreControl P control system External dimensions: Height 5000 mm Width 2650 mm Depth 1250 mm plus 300 mm storage table 34 carriers with a payload of 140 kg each with clear usable dimensions: H = 220 mm W = 2220 mm D = 410 mm Chain pitch 254 mm Storage table at 1000 mm above floor level with wooden worktop Color: GRAY, surfaces cleaned, signs of wear may occur Nwodsdnfdlepfx Ag Ijc Motor power: 1 x 1.8 kW / 400 volts Subject to errors and technical changes Delivery and installation currently mainly in Germany, Austria, and several neighboring countries

Condition: ready for operation (used), Year of construction: 2007, clamping force: 5,000 kN, overall weight: 26,400 kg, This 3-axis Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range of 70 to 90 mm, and a maximum shot weight up to 1,860 g. Consider the opportunity to buy this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine. • Maximum mold opening force: 150 kN • Enhanced opening force: 100 / 1,000 kN • Opening stroke: up to 900 mm Nwedpfxjydnigj Ag Iec • Mold height: min. 400 – max. 1,050 mm • Distance between platens: 1,300 – 1,950 mm • Tie-bar spacing (H × V): 920 × 920 mm • Platen size (W × H): 1,280 × 1,280 mm • Movable platen weight (half): max. 8,000 kg • Ejector force: max. 800 kN • Ejector stroke: max. 250 mm Hydraulics / Drive • Hydraulic pump motor power: 75 kW • Dry cycle time (opening stroke 5): 4.5–6.44 s • Installed total power: 96 kW • Color: Structural light gray / mint green / red-yellow • Control cabinet safety standard: DIN EN 60204 • Socket combination: 1 × Schuko, 1 × CEE Injection Unit • Screw diameters: 70 / 80 / 90 mm • Effective screw length (L/D): 23 / 20 / 18 • Maximum shot volume: 1,232 / 1,608 / 2,036 cm³ • Maximum shot weight (PS): 1,125 / 1,469 / 1,860 g • Plasticizing capacity (PS): 185 / 215 / 250 kg/h • Maximum injection pressure: 2,500 / 2,000 / 1,580 bar • Injection rate: • Without accumulator: 290 / 380 / 482 cm³/s • With accumulator: 1,188 / 1,552 / 1,964 cm³/s • Holding pressure: max. 350 / 200 bar • Screw speed: 47 / 54 / 61 rpm • Screw torque: 3,500 Nm • Nozzle contact force: max. 110 kN • Nozzle stroke: max. 675 mm • Installed barrel heating power: 6 × 5,500 + 4,300 W • Installed nozzle heating power: 1,100 W • Oil fill volume: 590 liters • Motor + heating fuse rating: 200 A • Motor fuse: 125125 A • Heating fuse: 63 A

Condition: new, Year of construction: 2023, functionality: fully functional, Clamping force: 500 t Screw diameter: 60 mm Shot weight: 620 g Distance between tie bars V: 920 mm Distance between tie bars H: 920 mm Shot volume: 678 cm3 Type: Multicomponent Nwedjyg I A Sopfx Ag Iec Drive: Hybrid Special multicomponent machine

Condition: used, Year of construction: 2022, clamping force: 320 kN, displacement volume: 1,239 cm³, injection pressure: 1,830 bar, overall weight: 14,000 kg, load hours: 2,907 h, screw conveyor diameter: 70 mm, terms of delivery: FCA Pegnitz delivery time: on request Nwsdpfx Agoxluk Ss Ioc terms of payment: 100% prior to delivery

Condition: ready for operation (used), Year of construction: 2015, operating hours: 61,469 h, controller manufacturer: TRUMPF, controller model: TASC 6000, This TRUBEND Cell 5000 with TruBend 5085 extended version (2720 mm x 850 kN) and BendMaster 60 was manufactured in 2015. World's first bending automation with image recognition for maximum flexibility. Sheet metal parts up to 40 kg, 6-axis backgauge sensor technology. Maximum repeat accuracy thanks to angle sensor technology (ACB) in automated operation. It features a stable all-steel frame, electro-hydraulic top drive, and a modern block hydraulic system. The control unit is a TRUMPF TASC 6000 with a 15-inch touchscreen and network capabilities. Ideal for precise bending operations, consider the opportunity to buy this TRUMPF TruBend Cell 500 press brake. Contact us for more information about this machine. • Machine: TruBend 5085 (2720 mm x 850 kN) with BendMaster 60 • Stable all-steel machine frame • Press beam with spherical bearing and tilt adjustment • Electro-hydraulic top drive with 4-cylinder technology • Generous edge clearance • Flat front covers • Modern block hydraulics • Electronic pressure balance • Measuring system with glass scale and spring compensation • Hydraulic oil in the machine (lifetime lubrication) • Oil cooler • Control cabinet cooling via air-to-air heat exchanger • Modern machine design • Stop/Backgauge • Stop system • Backgauge system: 2 axes (X and R) • Tool clamping • Upper tool holder, manual clamping, hardened • Lower tool holder, hydraulic clamping, hardened • Lower tool shift, 2 positions, pneumatic • Crowning • Manual crowning • Control • TRUMPF TASC 6000 • Graphical workshop programming • Windows XPe (embedded), Pentium 4, 2.8 GHz • 2 GB RAM • 15-inch touchscreen • Network-enabled • Teleservice via modem Nwedpfx Agox Imqls Isc • Operation • Control panel with LCD keypad and foot switch • Communication rail • Safety • Standard safety devices • BendGuard safety device for upper tools up to 390 mm • CE marking Additional equipment • TRUMPF BendMaster automation (standard features) • Robot/Handling • Stable base and manipulator in die-cast aluminum • Load capacity 60 kg (workpiece plus gripper) • Low-profile welded floor track • Sheet metal sensor for contour detection • Rotary feedthrough for easy gripper change • Gripper coupling on the BendMaster • Sensors for 4-axis backgauge system • Electric drives • Double sheet detection • NC gripper transfer station • Vacuum generation for suction grippers • Control • TRUMPF PC control with operator terminal • Teleservice via modem • Operation via screen, mouse, and keyboard • Safety • Safety fence with access doorWorld's first bending automation with image recognition for maximum flexibility Sheet metal parts up to 40 kg, 6-axis backgauge sensor technologyMaximum repeat accuracy thanks to angle sensor technology (ACB) in automated operationTruBend 5085 (2720 mm x 850 kN) with BendMaster 60

Condition: used, Year of construction: 2008, clamping force: 160 kN, displacement volume: 251 cm³, injection pressure: 2,500 bar, overall weight: 8,200 kg, load hours: 37,200 h, screw conveyor diameter: 40 mm, terms of delivery: FCA Pegnitz Njdpjwd Udlsfx Ag Iowc delivery time: on request terms of payment: 100% prior to delivery

Condition: new, The DL E Heavy 620/5000 is a remarkable addition to the Conventional Horizontal Lathes category, specifically designed for Heavy-duty Lathes, offering unparalleled precision and robust power. This lathe can handle large turning diameters and workpiece lengths up to 8000 mm and over 1600 mm in diameter. Equipped with a powerful 22 kW motor, it boasts a heavy-duty cast-iron body that minimizes vibrations, ensuring a stable machining experience. The machine's induction-hardened and ground guideways contribute to its longevity and accuracy. With features such as a joystick control for easy X and Z feeds, a motorized tailstock, and a complete 3-axis position indicator, users benefit from enhanced productivity and efficiency. The large spindle bore of 130 mm and rapid feeds in both directions make it an excellent choice for demanding machining tasks. You can elevate your machining capabilities with the DL E Heavy 620/5000 – order online today to experience the KNUTH difference in Heavy-duty Lathes! Nwedpfxeww T Txe Ag Isc

Condition: used, Year of construction: 2013, TRUMPF - TRUPUNCH 5000 S10 with ToolMaster - 2013 - type S10 - system Siemens Sinumerik 840D - year of manufacturing August 2013 - regularly maintained - work area 3050x1550 mm Nedpfx Asyl Izleg Iowc - including ToolMaster - 220 kN punching press - max 8 mm sheet thickness - max sheet weight upto 230-280 kg - max strokes (punching) per minute 1,600 / min for punching (E = 1 mm) - marking / decorative operations speed2,800 / min marking speed - linear ATC for 21 tools (1600) + 4 sheet holders - tool holders (casettes) - weight appr. 17500 kg - OPTIONS: This machine already has ACTIVE DIES (c2 axis moves in the “Z” direction). MULTITOOL GROOVING THREADING / Gewindeschneiden ENGRAVING / Gravieren??? SIGN / Signieren HANDLING ROLLING TOOLS / Umgang mit Rollwerkzeuge REPOSITIONING CYLINDER / Nachsetzzylinder - used condition as showed on photos - regularly maintained, good condition - under power hours 84545 (not working hours, operating hours appr. max 25000) - reason for sale change to laser cutting, a new laser came and needed space - short videos available

Condition: used, tank capacity: 5,000 l, GENERAL Equipment: Crane lugs Design: upright Remarks: 1 pipeline inside the tank; heavier internal residues Speed: 100 / 200 RPM Internal diameter: 1,540 mm Total height: 4,600 mm Power: 4.7 / 5.9 kW Agitator: propeller Location: Bremen Nameplate: Volume: 5,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,500 mm Last application: paint industry TANK Base design: on legs Number of legs: 4 units EQUIPMENT Manhole / dome: on the top head (DN 500) Outlet: flange DN80 Njdjycluqopfx Ag Iewc MATERIAL SPECIFICATION Material of legs: stainless steel AGITATOR Voltage: 400 V Bottom bearing: Agitator arrangement: eccentric in the top head

Condition: used, tank capacity: 5,000 l, GENERAL Design: vertical Remarks: Manhole approx. 310 x 410 mm; minor dents in the cylinder Internal diameter: 1,490 mm Total height: 3,550 mm Location: Bremen Njdpfx Agjyck D Re Iowc Volume: 5,000 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,650 mm Last application: fruit juice TANK Support type: feet Number of feet: 4 pcs EQUIPMENT Manhole / dome: on the cylinder Outlet: DN32 DIN 11851 Note: slight residue MATERIAL SPECIFICATION Feet material: stainless steel

Condition: used, tank capacity: 5,000 l, GENERAL Design: upright Notes: Manhole approx. 320 x 420 mm; tanks are partially marbled on the outside; the foot lengths on the individual tanks differ slightly (usually one foot is shorter than the other two; the feet should be modified or shimmed accordingly before reinstallation); one tank has a small dent in the upper cylindrical area (see photos) Internal diameter: 1,370 mm Total height: 3,950 mm Location: Bremen Volume: 5,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,000 mm Previous application: winery Nwjdeyckqdspfx Ag Iec TANK Support type: feet Number of feet: 3 pcs EQUIPMENT Manhole / access hatch: in the cylinder Outlet: 90 mm Note: slight residues MATERIAL SPECIFICATIONS Foot material: stainless steel

Condition: used, tank capacity: 5,000 l, GENERAL Equipment: Crane lugs Design: vertical Remarks: Heating/cooling jacket can also be operated at 3 bar and 143°C (see photo of the nameplate); minor dents in the insulation jacket; sheet metal incisions in the insulation (especially in the lower base) External diameter: 1,830 mm Internal diameter: 1,690 mm Total height: 3,300 mm Heating/cooling: available Insulation: available Max. permissible operating temperature: 100 °C Max. permissible operating pressure: 4.0 bar Agitator: agitator flange Location: Bremen Cylinder temperature control: Thermoplate Nameplate: Volume: 5,000 liters Double jacket volume: 58.0 liters Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 2,100 mm Previous application: food industry TANK Max. permissible operating temperature: 100 °C Support type: feet Number of feet: 3 pcs. HEATING/COOLING JACKET Bottom temperature control: Thermoplate INSULATION Insulation jacket: welded Insulation jacket material: stainless steel EQUIPMENT Manway / dome: in top head (DN 500) Outlet: 50 mm Note: slight residues MATERIAL PROPERTIES Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR Nwedpfx Agoyciy Rs Ioc Agitator arrangement: off-center in top head

Condition: ready for operation (used), Year of construction: 2005, Mazak HCN 5000 Horizontal Machining Center (2005) Manufacturer: Mazak Model: HCN 5000 Condition: Good Nwjdpfjyc R Atex Ag Ijc Year of manufacture: 2005 Control: Mazatrol 640 Further information available upon request

Condition: good (used), Year of construction: 2019, functionality: fully functional, total height: 525 mm, lifting height: 885 mm, empty load weight: 1,600 kg, load capacity: 5,000 kg, overall weight: 1,600 kg, total length: 2,500 mm, total width: 2,000 mm, table width: 2,000 mm, Max. load: 5000 kg Min. height: 525 mm Njdpfxoyat Uys Ag Iswc Max. height: 885 mm Platform size: 2000 x 2500 mm Featured with: - Handheld controller Country of origin: Germany Motor power: 4 kW Machine LxWxH: 2000 x 2500 x 525 mm Machine weight: 1600 kg

Condition: new, Year of construction: 2024, NEW / NEVER USED Njdpfxeyc Ebwj Ag Iewc Power plant SIEMENS CCPP Two gas turbines SGT6-5000 and one steam turbine Siemens TOTAL power - 750 MW Frequency - 60 Hz Please contact us for more details. Thank you!

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 980 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 8,000 rpm, spindle nose: ISO 50, number of spindles: 240, CNC MSX 701 III Travels (X/Y/Z axes): 900 / 800 / 980 mm Pallet working surface: 630 x 630 mm Pallet load capacity: 1,200 kg High-torque spindle max speed: 8,000 rpm Rapid traverse rate (X, Y, Z): 50 m/min Tool magazine capacity: 240 tools Spindle motor power (30 min / continuous): 37 / 30 kW Machine Configuration: 240-position RACK tool magazine Spindle taper DIN 69871 – ISO 50 Tool breakage detection in magazine Index table with 1° indexing FASTEMS interface, model MLS-MD Spindle speed 8,000 rpm – 37/30 kW TOOL IC SYSTEM BALLUFF interface No. 600 macro variables No. 1 load monitor No. 200 storable programs No. 512 tool life management Nwsdpfx Agsykpg He Iec No. 999 tool offsets No. 48 workpiece coordinate systems Data server + ATA card Mori Seiki scraper-type chip conveyor with drum filter MARPOSS application, model MIDA T25G, with E86N radio transmission system META pumping unit, model M 50/50, partial filtration system, 50 bar high pressure COMET drilled pallet Instruction manuals and CE Declaration of Conformity

Year of construction: 2016, condition: ready for operation (used), Working dimensions X/Y: 2500mm/1250mm, punching force: 220kN, max. sheet thickness: 8mm, tool stations: 18, operating hours: approx. 46500h. Including GripMaster, ToolMaster, scrap grid clamps and -pallet as well as scissor lift table. Documentation available. An on-site inspection is possible. Expected to be available from May 2026. Nwjdpeykbf Iofx Ag Isc

Condition: excellent (used), functionality: fully functional, K+K BHVS 5000/12.5 Blanching Line Brand: K+K Model: BHVS 5000/12.5 Drum dimensions: 5000 x 1250 mm Overall dimensions: 8600 x 2300 x 4750 mm Power supply: Steam heating Nwodpfxoyku Ivj Ag Ijc The set includes: - Steel rotary discharge conveyor: 2900 x 500 mm - Machine chassis Without platform and stairs The K+K BHVS 5000/12.5 blanching line is a high-performance drum unit designed for the thermal processing of vegetables in industrial applications. The steam heating system ensures precise temperature control necessary for enzyme deactivation, improved texture, and preservation of the raw material's color. The robust 5000 mm drum guarantees adequate product retention time, while the integrated steel rotary discharge conveyor allows for smooth transfer of blanched goods to subsequent cooling or freezing sections.

Condition: new, Year of construction: 2024, Protec welding rotary table 5000 Kg load capacity speed infinitely variable 0,05 - 0,5 rpm Nsdpfx Agoid Szcs Iowc manual remote control height 600mm diameter 1500mm Foot remote control extra charge

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 5,000 kg, Column lift turning device 5000 kg, 3000, 1000 load capacity Positioner Sideros Syncrolift Double column Radio remote control (wireless) Year of construction 2024 Nodpfx Aouk Niyeg Iewc Load capacity 5000 kg Minimum working height: 1100 mm Maximum working height 1600 mm Speed 0.5 rpm Vertical adjustment 500 mm Clamping plate diameter 1000 mm Rotation 2.2 kW Lifting motor 2 x 2.2 kW Various column lifting and turning devices are available: 500 kg, 1000 kg, 2000 kg, 3000 kg, 5000 kg, 10000 kg, 20000 kg Request a quote

Condition: as good as new (ex-display), Year of construction: 2023, Welding rotary table Protec KT 5000 HV Complete set incl. hand and double foot remote control Digital display for speed Hydraulic height adjustment dimensions: Njdpfx Aoficr Ujg Iswc height tilted min: 800mm height tilted max: 1900mm height horizontal min: 1050mm height horizontal max: 2000mm diameter of the clamping disc 1500mm length 2900mm, width 1400mm weight 3200 Kg speed from 0,01 to approx. 0,7 rpm.

Condition: new, Year of construction: 2022, Protec KT 5000 welding rotary table Complete set incl. double foot remote control and hand remote control with digital display 5000 Kg load capacity Diameter clamping disc 1500mm Height horizontal 1500mm Height tilted to middle 1500mm Nedpfx Asfkt Ebjg Iewc Speed infinitely variable from 0.01 to approx. 0.7 rpm Inclination up to 120 length 2100mm width 1500mm

Condition: new, Year of construction: 2025, load capacity: 5,000 kg, Complete set including hand and double-foot remote control Digital speed display Hydraulic height adjustment Nedpfxel Dq U Uo Ag Iewc Dimensions: Tilt height min: 800mm Tilt height max: 1900mm Horizontal height min: 1050mm Horizontal height max: 2000mm Clamping disc diameter 1500mm Length 2900mm, width 1400mm Weight 3200 kg Speed from 0.01 to approx. 0.9 rpm. CE certified