Used Nh 5000 for sale (3,747)

Condition: new, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, electrical fuse: 35 A, welding current at 60% duty cycle: 420 A, welding current at 100% duty cycle: 360 A, input current: 44 A, protection type (IP code): IP23, welding current (min.): 10 A, welding current (max.): 500 A, input frequency: 60 Hz, We are offering this new Fronius TransSteel 5000 PULSE welding machine. Manufacturer: Fronius Model: TransSteel 5000 PULSE Part number: 4.075.229 Serial number: 31239039 Standard: IEC 60974-1/-10 Cl.A Protection class: IP 23 Rated input voltage: 380/400 V Alternative input voltage: 460 V Mains frequency: 50-60 Hz Mains current I1 max (380/400 V): 44 A Mains current I1 eff (380/400 V): 28 A Mains current I1 max (460 V): 38 A Hnedpozbvp Nsfx Abven Mains current I1 eff (460 V): 24 A Fuse size: 35 A Welding current range: 10–500 A Welding voltage range: 14.5–39.5 V Duty cycle 40%: 500 A Welding voltage at 40% duty cycle: 39.0 V Duty cycle 60%: 420 A Welding voltage at 60% duty cycle: 35.0 V Duty cycle 100%: 360 A Welding voltage at 100% duty cycle: 32.0 V If you have any questions or require further information, please do not hesitate to send us a message or call us.

Year of construction: 1985, condition: used, closing pressure 4360 kN table-size 730 x 730 mm control B+R Industrieelektronik draw back pressure 190 kN ajustment speed max. 60 mm/sec return speed max. 90 mm/sec daylight between the columns 900 mm total power requirement 30 kW Hnodpfetqqr Eox Abvsn dimensions of machine L x W x H 3,61 x 2,1 x 3,1 m dimensions of switch cabinet 0,85 x 0,44 x 2,0 m dimensions of hydaulic 1,0 x 0,85 x 2,36 m weight ca. 15 t = vulcanizing press with vertical closing unit, with form removal and form separation device

Condition: used, Year of construction: 1990, pressure 60 t throat 400 mm stroke 600 mm dayligth 700 mm table surface area 1120 x 700 mm table height over floor 850 mm ram surface 700 x 700 mm feed down 300 mm/sec feed up 130 / 260 mm/sec Hnsdpovut Edefx Abven feed under pressure 5 / 10 mm/sec oil volume 275 l total power requirement 7,5 kW weight of the machine ca. 7,3 t required space 1,6 x 2,0 x 3,7 m with oil-hydraulic drive, controllable dependant on pressure/time and way, two-hand operation

Condition: like new (used), Year of construction: 2026, functionality: fully functional, Kilia 325 Liter Cutter 5000 Express – Factory overhauled 2025 Powerful high-performance cutter system with extensive general overhaul – ready for continuous use in professional food processing Top Features & Highlights: Overhauled in 2025 – numerous main components newly installed: Vacuum pump Base plate Main motor & plate motor Knife shaft incl. bearing Electronic control incl. new control cabinet (stainless steel) Frequency converter Hydraulic cylinder & unit Ejector motor & bearing Hnodpsyk Tuujfx Abvsn Feeder motor & bearing Electronic control panel with 10-inch touch panel & joysticks All scrapers Technical equipment: Robust stainless steel design (machine & bowl) High-performance knife shaft drive, infinitely variable from 50–4000 rpm, with reverse (50–500 rpm) Knife shaft drive power: 81 kW, bowl: 3 kW (400 V, 50 Hz) Hydraulically operated noise protection cover (double-walled, stainless steel) Fully automatic ejector (hydraulic) Maintenance-free knife shaft system Automatic central lubrication (ADS 100) Knife shaft brake (electric) 6-knife set Knecht K24 Thermometer & tachometer with end shut-off (electronic) Hydraulic knife tension nut Loading system for 200-liter trolleys (hydraulic) Vacuum function for highest product quality Integrated maintenance and inspection module Remote diagnosis via encrypted internet connection (broadband required) Separate stainless steel control cabinet (wall-mountable) Manual or automatic water addition

Condition: excellent (used), functionality: fully functional, El. heated salt bath continuous furnace system, make Kohnle consisting of Magnetic feeder Hardening furnace Type: BLH 950-650/100-5000 Temperature: max. 950°C Throughput: 200 kg/h Conveyer belt width: 620 mm Effective height: 90 mm Connected load: 160 kW Heated length: 5.000 mm Temperature control zones: 5 Throughput speed: 170 - 20 mm/min. Time in the heating zone: 30 - 240 minutes Gases used: nitrogen, methanol, natural gas, ammonia, propane Salt bath Salt: AS200 Hnjdpsy Uuwmefx Abvsn Washing system

Condition: excellent (used), El. heated salt bath continuous furnace system, make Kohnle consisting of Magnetic feeder Hardening furnace Type: BLH 950-650/100-5000 Temperature: max. 950°C Throughput: 200 kg/h Conveyer belt width: 620 mm Effective height: 90 mm Connected load: 160 kW Heated length: 5.000 mm Temperature control zones: 5 Throughput speed: 170 - 20 mm/min. Time in the heating zone: 30 - 240 minutes Gases used: nitrogen, methanol, natural gas, ammonia, propane Salt bath Hodpfx Aey Uuu Eobvsnn Salt: AS200 Washing system

Condition: refurbished (used), Year of construction: 1997, machine/vehicle number: 4290, functionality: fully functional, pressing force: 30 t, stroke length: 300 mm, table width: 440 mm, table length: 320 mm, total height: 2,750 mm, Fully refurbished Schoen double-column press, manufactured in 1997/2025. Press force: 300 kN Hjdpfxjy Uv T As Abvsnn Installation height: 500 mm Stroke: 300 mm Table: W x D 440 x 320 mm Machine will be fully refurbished: - new control system - new light curtain - hydraulic system overhaul.

Condition: like new (used), functionality: fully functional, ESPERA ES 5000 ID.NO. 2779 Espera ES 5000 price labeler / Check scale this machine applies the label from the top of the package. Hsdsua D Inspfx Abvonn Dimensions 155 x 90 cm Height 150 cm. Band width 30 cm. Wave length 37 cm.

Condition: as good as new (ex-display), JUNE OFFER. FOR THE WHOLE OF JUNE -10% off all welding machines We offer welding machines in a wide variety of configurations and always have several sets in stock. CMT / ROBOT / CMT UNIVERSAL hose packages or HOLLOW SHAFT robots. Everything in stock and available immediately! Don't hesitate to request your customized configuration! Hnodpfx Ashzhynebvjn We also have a wide variety of spare parts -30% -50% -70% in stock. Just send us a quick email, call us, or WhatsApp us. CMT MACHINES at 1/3 the new price! - 66% DISCOUNT ALL MACHINES CAN BE VIEWED IN VIENNA and PURCHASED WITHOUT WAITING! The prices listed are all starting from ... euros. The prices/offers are created individually according to the device configuration. .) Fronius power source (TPS 4000 CMT) .) Fronius cooling unit (FK 4000) Vufdfi .) Fronius VR CMT wire feeder .) Fronius intermediate hose package .) Fronius trolley .) Fronius hose package CMT robot .) Fronius RCU 5000i Example images of the product. Please see the numerous YouTube videos on the topic of CMT! Also available via WhatsApp and Viber Stocked in Vienna 1230 (Vienna) Shipping on pallets available for an additional charge: Austria approx. 180 euros Germany approx. 230 euros Europe upon request All prices are starting from prices. You can configure the devices with us. Robot device or handheld device. Long connecting hose package or short. Various hose packages to choose from. Synchropuls. 270 400 or 500 amp units in stock. CMT versions available as handheld or robotic. It's best to call us. We'll discuss your application and give you an initial price estimate.

Condition: ready for operation (used), DAREX AP 5000 / Precision spiral drill grinding machine -CE marking Hsdpfjy U H Ecsx Abvonn -Grinding range 1.5 - 26 mm -Suitable for standard spiral drills (HSS cobalt, optionally carbide) -Grinding types: conical taper, and automatic cross-grinding (split point) to reduce the transverse cutting edge -Automatic operation -Various inserts Dimensions: L x W x H 0.5 x 0.5 x 0.4 meters / Weight 50 kg Errors and omissions excepted.

Condition: used, Year of construction: 1999, Technical details: Hsdpfswvkgmjx Abvenn screw size: 45 mm injection shot weight in Polysterol: 149 g/PS closing pressure: 1250 kN

Condition: used, Year of construction: 2026, power: 74 kW (100.61 HP), fuel type: diesel, fuel: diesel, loading space volume: 5 m³, Dulevo Evolution 5000 EU3 • Compact industrial sweeper • Diesel • Sweeping width, center brush: 1200mm Hnjdpfxoy T Rqte Abvjn • Sweeping width with side brush: 2400mm / 2600mm • Dirt container capacity: 5m3 • Engine power: 75-100 hp • Drive system: Hydrostatic Ready for immediate use! Condition: Used Year of manufacture: 2026

Condition: excellent (used), 1 tower DC 10/60 Hedpfovttxhsx Abvonn DBM 500 DBM 500 T

Condition: excellent (used), Duplo System 5000 Year 2007 Hjdpoxtwyxjfx Abvenn Trimmer DBM 500 2xDC 10/60

Year of construction: 2002, condition: used, machine/vehicle number: 001, Description Hnjdpfx Absy Uzldjvsn Offered is an automated edge trimming line with singulation, trimmer for cross-cutting, 2 stacking machines, additional discharge, and cross-cutting of stacking slats: Boards 2000-5000 mm long, 16 - 40 mm thick, 70 - 200 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at the joystick: - Boards are transported laterally using a 4-strand chain cross conveyor - Singulation inclined conveyor 6000 mm wide, 3000 mm inclined - Alignment roller section - Chain cross conveyor as a layer former - Star infeed and inspection unit before the trimmer - Edge detection (ALFHA-Edger) - Trimmer with 11 saws in a 50.5 cm grid: The operator (seated) at the joystick assesses: without re-trimming, 5000 mm into stacking machine 1, alternatively: without re-trimming, 4000 mm into stacking machine 1 with re-trimming, 4000 mm into stacking machine 2 with re-trimming, 3000 mm into stacking machine 2 with re-trimming of short lengths for discharge into a box with re-trimming of short lengths for discharge into a box with re-trimming, 2 or 3 x 101 cm for stacking slats with re-trimming, 2 or 3 x 101 cm for stacking slats or waste cut – cutting length 505 mm for the underlying vibration chute - 2 stacking machines: 1 x 2500 to 5000 mm and 1 x 2000 to 4000 mm - automatic lowering of finished packages and onward transport to the automatic strapping station - FROMM strapping with 16 mm plastic band and automatic onward transport to the discharge roller conveyor - ALFHA control with Siemens S 7 – ensures perfect operation. Performance records / daily logs - Control cabinets with Siemens components, SEW motors, Telco light barriers For example, one employee was able to produce, package, and strap approximately 15,000 boards of size 4000/17 x 76 mm in 9 hours. The system is still assembled, but the upstream chipping unit has already been dismantled. The system is therefore immediately available. It is very robustly built and has always operated smoothly and without any problems.

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 001, cutting length (max.): 5,000 mm, Offered is an automated side board processing line with singulation, trimmer for cutting to length, 2 stacking machines, additional discharge, and cutting of stacking slats: Boards 2000-5000 mm long, 16 - 40 mm thick, 70 - 200 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at the joystick: - Cross transfer of boards with a 4-strand chain cross conveyor - Singulation steep conveyor 6000 mm wide, 3000 mm inclined Hnodpfx Aoy Uzhfjbvsn - Aligning roller conveyor - Chain cross conveyor as a layer former - Star turner and sorter before the trimmer - Edge detection (ALFHA edger) - Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick evaluates: without re-cutting, 5000 mm into stacking machine 1, alternatively: without re-cutting, 4000 mm into stacking machine 1 with re-cutting, 4000 mm into stacking machine 2 with re-cutting, 3000 mm into stacking machine 2 with re-cutting, short lengths for discharge into a box with re-cutting, short lengths for discharge into a box with re-cutting, 2 or 3 x 101 cm for stacking slats with re-cutting, 2 or 3 x 101 cm for stacking slats or waste cut - cutting length 505 mm for the underlying vibration chute - 2 stacking machines: 1 x 2500 to 5000 mm and 1 x 2000 to 4000 mm - automatic lowering of the finished packages and onward transport to the automatic strapping station - FROMM strapping with 16 mm plastic band and automatic onward transport to the discharge roller conveyor - ALFHA control with Siemens S 7 - ensures perfect operation. Performance records / daily logs - Control cabinets with Siemens components, SEW motors, Telco light barriers For example, with side boards of 4000/17 x 76 mm, one employee produced, packaged, and strapped approximately 15,000 boards in 9 hours. The system is still assembled, but the upstream chipping system has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without problems.

Condition: new, functionality: fully functional, power: 235.36 kW (320.00 HP), axle configuration: 4x4, fuel: diesel, color: red, gearing type: semi-automatic, emission class: euro6, Year of construction: 2025, Equipment: air conditioning, airbag, all wheel drive, central locking, differential lock, trailer coupling, From our portfolio of new vehicles, we offer: TLF 4000 All-wheel drive on an off-road MAN TGM 18.320 all-wheel chassis Our Water Buffalo on MAN Hardly any terrain is too difficult for it. Calm and powerful, it reliably delivers its load to the destination. At the incident site, it demonstrates its full capabilities—transporting crew, equipment, and sufficient extinguishing agents to the scene, supported by a high-performance pump. Chassis: • MAN TGM 18.320 4x4 EURO 6 with 320 HP (235 kW) • Automated transmission • Off-road tires • Single wide tires matched to track width for maximum off-road capability Cab: • Standard crew cab (1+5) in RAL 3000 (fire red) • Air conditioning and auxiliary heater • Standard 4 SCBA mounts in the crew compartment Superstructure: • High-quality frame-style superstructure made from stainless and corrosion-resistant materials • Folding steps for each side-mounted equipment compartment • Individually customised stainless steel equipment storage solutions • Walkable, non-slip vehicle roof Vehicle pump / Extinguishing agent tank: • Maintenance-free combined normal/high-pressure pump TITAN S40HP FPN 4000-10 • PUMP & ROLL capable • Output: 4,000 l/min at 10 bar and 400 l/min at 40 bar • Integrated, infinitely variable foam proportioning system • Water tank 5,000 l with integrated 500 l foam agent tank • Auxiliary heater in the pump compartment Firefighting equipment: • High-pressure rapid intervention reel with 50 m rigid hose • Roof-mounted foam/water monitor, 2,000 l/min • Self-protection system with 4 spray nozzles in front of the wheels Safety and lighting: • LED lightbar on the roof / 2 LED front flashers • Pneumatic special signal system Martin-Horn • 100 W PA system with announcement unit • Rear-view camera • Comprehensive LED lighting in crew and all equipment compartments • LED scene lighting on the superstructure and additional spotlight • Pneumatic LED light mast with remote control • Hygiene board available on request Hnjdpfx Absxzu Ehsvon We would be happy to provide you with a detailed offer and present the vehicle to you at our site in Berlin. All details provided to the best of our knowledge and belief, without guarantee for completeness or accuracy. This advertisement constitutes information and is not a binding offer. Subject to prior sale!

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, For sale: this lathe. General overhaul completed in 2009. Swing diameter over bed: 1,000 mm Turning length: 5,000 mm Siemens Sinumerik 840D The machine is currently finishing a job and will be available at the end of January 2026. Hnjdpfoxxvqaex Abven

Condition: used, Year of construction: 2011, Pallet: 500 x 500 mm X: 730 mm Y: 730 mm Z: 740 mm Maximum detail size: Ø 800 x 1000 mm Max load capacity: 700 kg Spindle speed: 12 000 r/min - High-torque Spindle effect: 22/30 kW , 300 Nm (AC40HP) CAT 40 Tool changer: 40 positions Interface for coolant system Prepare for probe OMP60 Cromar conveyor Synchronised tapping G00 slope constant EIA EIA 3D COMP Scaling included loading of machine included tools and cubes Mazak HC Nexus 5000-II: LxWxH: 475 x 238 x 285 cm Pallet: 500 x 500 mm X: 730 mm Y: 730 mm Hnedpoy H Dnxofx Abven Z: 740 mm Max load capacity: 700 kg Tool changer: 40 positions

Condition: used, Fan 2.2 kW, 5000 m³/h, exhaust fan, centrifugal fan, used machine Manufacturer: B és S Ventilátor Type: FVFH 450/500 Overall dimensions: Width: 790 mm Depth: 730 mm Height:980 mm Year of manufacture: 2017 Hnjdpfx Aoypvcljbvjn Airflow: 5000 m³/h Electrical data: 400 V, 2.2 kW, 4.7 A Pressure: 800 Pa

Condition: reconditioned (used), Year of construction: 2006, High-speed planer. After full maintenance. Model-Hydromat 5000 Year of manufacture-2006 №36650-280 Feed speed-6-200 m/min. Electric motor-30 kW. Hnedpoh Txd Iofx Abvon Working width-400 mm. Machining height-150 mm. Spindle arrangement: 1) Lower-37 kW 2) Upper-45 kW 3) Right-30 kW 4) Left -30 kW Table lubrication automatic All heads included Diameter of spindles - 50 mm.

Condition: new, Year of construction: 2025, New Optimizing saw SALVACUT 5000 by SALVAMAC Hodpfx Aon E Sl Rjbvonn Innovative high speed optimizing saw with optimization and elimination of wood defects, with double traction with upper rollers and lower feed belt with independent management. From an idea of Salvador Christian.

Condition: used, machine/vehicle number: LC596, Used complete line for still wine - 5000 BPHTechnical Specifications & Performance DataThis used bottling line is configured for glass bottle handling with a comprehensive sequence from filtration to case packing and palletizing. It is a second hand solution engineered for industrial packaging and beverage production, integrating well-known European manufacturers. The configuration covers rinsing, filling, capping (flush cork and aluminum), capsule application (heat-shrink and polylaminate), adhesive labeling, and end-of-line packaging.Container type: Glass bottlesCore monoblock: MBF Syncrofill 1200.25/1200.30LV/360.4SR/240.4AV/240 (rinsing–filling–capping)Filtering: Seitz Orion plate filtration groupBottle preparation: SICK Blancamat 8 bottle washer (pre-labeling)Capsule application: Nortan Prisma 40 (heat-shrink), Robino & Galandrino Astra 6 (polylaminate)Labeling: Cavagnino & Gatti CG E8-4-2NPS (3 stations: front/back/neck), Pago PAG.876 carton labelerConveying/accumulation: MBF accumulation table (conveyor)Case handling (option set 1): Bortolin & Kemo FOC 23 30 case erector, MA 88/1 divider inserter, IAM 2T AP case packer, MARA HM case sealer, PAC 2000 palletizerCase handling (option set 2): Mas Pack MAS 1200 case erector (400 Vac, 2 kW), Mas Pack Minipack 21/4 case packer (400 Vac, 6 kW), Mas Pack Seal 1200 case sealer, Mas Pack Exacta R Astride divider inserterAuxiliary equipment: PREO E0P051 4R2 hotmelt units, Ber PDC 30 carton scaleSelected component years: 2011 (Mas Pack MAS 1200, Seal 1200), 2015 (Mas Pack Minipack 21/4, Exacta R Astride), 2001 (Ber PDC 30)Certifications: CE markings on Mas Pack modulesAdvanced Automation & Control SystemsThe line combines automated capsule application, adhesive labeling with multi-station control, and end-of-line carton forming, gluing, and packing. Modules feature integrated safety circuits and CE-compliant controls. Hotmelt application is handled by PREO melters for reliable carton sealing. Quick adjustments across labeling stations and format handling enable efficient changeovers within glass bottle families.Adhesive labeling with 3-station control for front/back/neck labelsAutomated heat-shrink and polylaminate capsule applicationHotmelt application via PREO E0P051 4R2 unitsCE-compliant electrical panels on Mas Pack packaging modulesOperator-friendly HMI/controls at packaging stations (per module)Production Line Integration CapabilitiesDesigned for inline operation, the system integrates filtration, monoblock rinsing–filling–capping, labeling, and complete end-of-line packaging. The conveyorized accumulation table assists with buffer management for steady flow between wet and dry ends. The end-of-line can be configured with either Bortolin & Kemo or Mas Pack equipment to match site preferences and spare parts policy.Inline glass bottle processing from filtration to palletizingFo.. Hnjdpfxeyhbhqj Abven

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 1,356 h, load capacity: 4,500 kg, lifting height: 5,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,500 mm, gearing type: hydrostat, fork carriage width: 1,250 mm, fork length: 1,250 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200X50-10, rear tire type: cushion tires (black), rear tire size: 250-15, overall weight: 11,440 kg, empty load weight: 6,940 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,250 mm, color: orange, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, HUBTEX DQ45G – 2017 | 1365 hours | LPG | DUPLEX 5000 mm | FORK POSITIONER Hjdpey Uyh Refx Abvsnn Ready for use from day one – no investment, no risk ✅ Why choose this forklift? Need a machine that won’t disrupt your workflow? ⚙️ This HUBTEX DQ45G is fully serviced and ready for immediate operation – no hidden costs. ✔️ Full service (oils, filters, complete inspection) ✔️ Condition: like new ✔️ Only 1365 operating hours ✔️ New tyres – no additional investment required Key Specifications 🔹 Capacity: 4,500 kg 🔹 Drive: LPG 🔹 Mast: Duplex – 5,000 mm 🔹 Fork positioner: 1,250 mm 🔹 Forks: 1,250 mm 🔹 Cabin: fully enclosed, heated Technical Data 🔹 Year: 2017 🔹 Hours: 1,365 🔹 Weight: 6,940 kg 🔹 Load centre: 600 mm Mast & Lifting 🔹 Duplex mast 🔹 Lifting height: 5,000 mm Dimensions 🔹 Height: 2,600 mm 🔹 Length: 2,500 mm 🔹 Width: 2,250 mm Chassis 🔹 Superelastic tyres (100%) – new Equipment 🔹 Heated full cabin 🔹 Fork positioner 🔹 Lighting Condition ✔️ Technical: 5/5 ✔️ Visual: like new Perfect for 🏭 Narrow aisles 🌲 Timber/steel industry 📦 Long loads 🌍 Indoor & outdoor applications What you receive ✔️ Fully tested machine ✔️ Ready for immediate use ✔️ Online demonstration available ✔️ Delivery to your location Delivery & Service 🚛 Europe-wide transport 📦 Comprehensive logistics support 💼 Leasing options available 🔧 After-sales support Why FT LOGISTICS? ✔️ 100+ machines in stock ✔️ In-house service team ✔️ Extensive European experience ✔️ Trusted by numerous clients FT LOGISTICS – Forklifts that get the job done.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 1,356 h, load capacity: 4,500 kg, lifting height: 5,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,500 mm, gearing type: hydrostat, fork carriage width: 1,250 mm, fork length: 1,250 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200X50-10, rear tire type: cushion tires (black), rear tire size: 250-15, overall weight: 11,440 kg, empty load weight: 6,940 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,250 mm, color: orange, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, HUBTEX DQ45G – 2017 | 1365 hours | LPG | DUPLEX 5000 mm | FORK POSITIONER Ready for use from day one – no investment, no risk ✅ Why choose this forklift? Need a machine that won’t disrupt your workflow? ⚙️ This HUBTEX DQ45G is fully serviced and ready for immediate operation – no hidden costs. ✔️ Full service (oils, filters, complete inspection) ✔️ Condition: like new ✔️ Only 1365 operating hours ✔️ New tyres – no additional investment required Key Specifications 🔹 Capacity: 4,500 kg 🔹 Drive: LPG 🔹 Mast: Duplex – 5,000 mm 🔹 Fork positioner: 1,250 mm 🔹 Forks: 1,250 mm 🔹 Cabin: fully enclosed, heated Technical Data 🔹 Year: 2017 🔹 Hours: 1,365 🔹 Weight: 6,940 kg 🔹 Load centre: 600 mm Mast & Lifting 🔹 Duplex mast 🔹 Lifting height: 5,000 mm Hjdpfey Ux Sujx Abvenn Dimensions 🔹 Height: 2,600 mm 🔹 Length: 2,500 mm 🔹 Width: 2,250 mm Chassis 🔹 Superelastic tyres (100%) – new Equipment 🔹 Heated full cabin 🔹 Fork positioner 🔹 Lighting Condition ✔️ Technical: 5/5 ✔️ Visual: like new Perfect for 🏭 Narrow aisles 🌲 Timber/steel industry 📦 Long loads 🌍 Indoor & outdoor applications What you receive ✔️ Fully tested machine ✔️ Ready for immediate use ✔️ Online demonstration available ✔️ Delivery to your location Delivery & Service 🚛 Europe-wide transport 📦 Comprehensive logistics support 💼 Leasing options available 🔧 After-sales support Why FT LOGISTICS? ✔️ 100+ machines in stock ✔️ In-house service team ✔️ Extensive European experience ✔️ Trusted by numerous clients FT LOGISTICS – Forklifts that get the job done.