Used O Wire Punch for sale (6,212)

Condition: used, Year of construction: 1965, multifix ja Fodexylq Eopfx Agrspb centre distance 1500 mm documentation ja weight of the machine ca. 3 t

Condition: used, mileage: 8,229 km, power: 52 kW (70.70 HP), gearing type: other, fuel type: diesel, color: orange, overall weight: 16,000 kg, empty load weight: 14,300 kg, maximum load weight: 1,700 kg, axle configuration: 4x4, number of seats: 1, first registration: 01/1994, Year of construction: 1994, operating hours: 8,229 h, front tire size: 10.00-20, driver cabin: other, wheelbase: 2,500 mm, maximum speed: 20 km/h, Equipment: all wheel drive, Vehicle location: Bovenden. Raised exhaust, work lights, twin tyres, grab controls. Wheelbase: 2,500 mm. Body: MH 4 Plus/PL. 4-cylinder Deutz engine, 20 km/h, adjustable boom, own weight approx. 14,300 kg, tyres: 10.00-20, transport length: 7.9 m, transport width: 2.5 m, transport height: 3.07 m. Mileage (km) corresponds to operating hours. Various buckets and grabs available at an extra cost of €4,000! ACCESSORY DETAILS WITHOUT WARRANTY. Subject to changes, prior sale, and errors! Fjdpjxbqmzsfx Agrepb

Condition: new, Year of construction: 2025, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Fpjdpfemk S Sljx Agrjb Take a look at the monitor images and see the functions – parameters that can be adjusted. Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language. In our offer we have a lot of welding machines we developed ourselves and they are all digitally and software based MIG MAG, MIG PULS SYNERGIC welding machines, also for robot welding with touch screen monitor, TIG ac dc with touch screen monitor, digital plasma cutting machines, electronics for controling the high pressure water jet pump, sand dispenser for water jet cutting, voltage THC with touch screen monitor... We are also very involved in innovation and development, please take a look at our other products, if you are a manufacturer, and are interested in discussing further, we are also selling know-how.

Condition: used, Year of construction: 1990, Equipment: all wheel drive, * O&K crawler excavator * Year of manufacture 1990 * Window defect * Needs repair * Work lights Fpodpfx Agowpptlersb * Bucket ----Internal vehicle number: 10119-----Subject to errors and prior sale

Condition: used, operating hours: 6,900 h, Equipment: all wheel drive, O & K Fpodpfx Ajwch N Eegrsb L 20.5 B Original color Tires approx. 50% Shovel KW 89 Year of manufacture 2001 etc...

Condition: used, Year of construction: 2002, operating hours: 11,000 h, Equipment: all wheel drive, * O & K MH Plus wheeled excavator with approx. 11,000 operating hours - first commissioned in 2002 * With articulated system - quick coupler - hammer line and 5 buckets in total * Transport length : 7,900 mm - Total width : 2,500 mm - Total height : 3,100 mm * Total weight : 14.300 kg - Tires 10 R 20 - Vehicle available immediately - * Regularly serviced - German vehicle - From 1st hand - * Engine manufacturer : Deutz Type : F4L913 with 78 KW / 106 PS * PICK-UP PRICE - TAKE IT AS IS - WITHOUT TÜV - WITHOUT LICENSE PLATE - Fpsdexgldlspfx Agreb * For viewing please make an appointment * Contact person : Mr. Andreas Vogel * The information provided on the Internet is a non-binding description. * They do not represent warranted characteristics. * The seller is not liable for typing or data transmission errors. * Subject to alterations, errors and prior sale.

Condition: used, Year of construction: 2003, operating hours: 4,717 h, Equipment: all wheel drive, * hydr Schnellwechsel * Standart Schaufe * 3. Steuerkreis * Arbeitsbeleuchtung * Straßenbeleuchtung * 4 Zylinder Perkins 700 Motor Fpjdpfx Asmcxgujgrob * 1 Hebelbedieung * 5800 kg GG * Heizung * Breit- Reifen 20 Zoll 90-60% * Perkins 700 Serie 4 Zyinder Motor * deutsches Fahrzeug * 1. Hand * Betriebserlaubnis * Declaration of Conformity * Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt Verkauf nur an Gewerbe Dieses Angebot ist unverbindlich und freibleibend. Irrtum und Zwischenverkauf vorbehalten. · Keine Gewähr auf Eingabefehler. Transport zum Hafen möglich Besichtigungen nur nach Vereinbarung WhatsApp

Condition: used, power: 294 kW (399.73 HP), overall weight: 78,000 kg, Year of construction: 1997, operating hours: 11,280 h, machine/vehicle number: 72653, Backhoe excavator with digging bucket, extensive documentation available Fpodpfx Ajt S H A Hegreb

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 19,295 h, Equipment: cabin, gripper hydraulics, Used O&K MH 6.5 material handler. - Year of manufacture: 2003 - Operating hours: 19,295 - Issues with throttle regulation. The multi-shell grab is not included in the offer and will not be sold with the machine! Fpjdpfxexvbh Se Agrsb

Condition: used, Year of construction: 1988, operating hours: 2,360 h, Equipment: soot filter, Ref. No.: B - 02 * O&K * RH 6 * Crawler chassis Fodpfxoxvf S Ie Agrepb * with vibratory hammer * approx. 2360 operating hours * fully functional Trade-in possible Financing from 4.99% Subject to errors and prior sale! The information in this listing is non-binding descriptions and does not represent guaranteed characteristics. The seller assumes no liability for typographical or data transmission errors. Listed equipment should be checked separately. All information in the listings is non-binding! Delivery available throughout Germany upon request Opening hours: Monday to Thursday from 9:00 am to 5:00 pm, Friday from 9:00 am to 2:00 pm, and by appointment!

Year of construction: 2012, condition: ready for operation (used), A Roll-o-Matic bag production line for bottom-sealed film bags is available. Bag length range: 360mm-1800mm, max. bag width: 860mm, max. production speed: 90m/min, max. cycle rate: 230/min, material: PE LD/PP, max. film thickness: 70µm. Machine dimensions: approx. 4100mm/1600mm/1700mm, weight: approx. 1600kg, control system: Siemens PLC. Documentation available. On-site inspection possible. Fpsdpoxrf I Usfx Agrjb

Condition: reconditioned (used), machine/vehicle number: 550-235-ELD, GENERAL CHARACTERISTICS workpiece Ø max. 41 mm Range Module máx/min. 1,5 / 0.39 Rack face width 92 mm Manufacturing No. 550-235-ELD Máx/min. pitch form 20/40-32/64 Maximum stroke of tools trolley 760 mm Rack length máx. 610 mm ELECTRICAL CHARACTERISTICS Fpsded Nw Ttepfx Agrjb Main motor power 15 Cv

Condition: used, gr. working width: 1100 mm for sheet thickness (steel sheet) up to approx.: 1 mm Fedpfscaxvhex Agrspb electr. drive: 380 V, 0,75 kW space requirement: 2330 x 600 x 1140 mm weight: 357

Condition: used, CNC control, control panel, machining center, server cabinet -I/O Control: control panel -Dell: Desktop KXGVD -Dell: Optiplex 390 Tower -Dimensions: 505/640/H1600 mm -Weight: 72 kg Fedpfx Agsfkq T Teropb

Condition: used, Cooling unit, cooling water chiller, water cooler, chiller O. Hellwig Year of manufacture: approx. 1995 Cooling capacity approx. 6 kW Nominal power of cooling unit: 3 kW Refrigerant R422D Water tank capacity approx. 35 liters Circulation pump flow rate: 40 liters/min Pump power: 0.63 kW Water connections: 1/2 inch Power supply: 380 volts, 50 Hz - Temperature adjustment via rotary potentiometer Space requirements: L x W x H 1100 x 750 x 140 mm Fpsdpfxopu R Ncs Agrsb Weight: 285 kg

Condition: used, Ex-Cell-O XG620 Excello XG 620 Siemens CNC overhauled 2011 docs available ball groove milling for CV constant velocity joints - homokinetic joints Fpodpourt Tlofx Agrob This machine can be inspected in our warehouse in Gussago BS Italy (Milan Area)

Condition: used, Year of construction: 1987, rolling capacity max. NA t workpiece diameter 38 mm workpiece length 500 mm total power requirement 24 kW weight of the machine ca. 10 t dimensions of the machine ca. m Fpsdst Hw D Dspfx Agreb Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Module range 0.3 - 1.3 Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. * Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long. * Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l. * Coolant device in the machine. * Control panel with malfunction message in plaintext, etc. Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations. Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: good (used), Double-toggle jaw crusher Manufacturer: O&K Fjdov Rp N Ropfx Agrepb Jaw width: approx. 1,000 x 850 mm In stock

Condition: used, Micomat 250 - 40-250A welding current Fpodpfx Agexc Tw Ssrob - Shipping available at extra cost

Condition: used, CNC control, control panel, machining center, server cabinet Fsdpjfkq T Uofx Agrepb -I/O: Control panel -Dell: Desktop KXGVD -Dell: Precision T1650 Tower -with: scanner -Dimensions: 505/640/H1600 mm -Weight: 74 kg

Year of construction: 2025, condition: new, Autonomous RS1 and modular RS2 containers in the CompoFlow system represent the latest solutions for the biological processing of organic waste. Designed for mobile and decentralized biowaste collection (RS1), as well as stationary operation at composting facilities (RS2). Perfect for ensuring a controlled process of composting, biodrying, and biostabilization, along with efficient organic waste logistics. Fpjdpfx Asikq Eysgrsb Each composting system is tailored to the individual needs of the client. After analyzing the material intended for processing, we specify the required number of containers and the necessary composting capacity. Made in Poland – Eco-friendly – Durable – Certified – EU compliant Composting significantly increases recycling rates. RS TEAMTECH Sp. z o.o.

Condition: used, functionality: unexamined, spindle bore: 81 mm, turning diameter over bed slide: 650 mm, center height: 320 mm, turning length: 1,500 mm, Used lathe, see pictures. With Sony digital readout and 660mm faceplate. Year of manufacture: 1976. All technical specifications in the last picture. NOTE: The type plate states XD500, but it is actually an XD630, according to the dimensions and delivery note. Fsdpfowm Rviex Agropb Center distance: 1500 Trajectory length: 2500 Center height: 320mm With taper turning direction, side guide

Condition: used, Welding fume filter, welding fume extraction, flexible extraction arm -Manufacturer: MIG O MAT, welding fume extraction -Extraction fan: Motor Elmot 1.1 kW -Extraction arm: length 5700 mm -Tube: Ø 160 mm / inner Ø 145 mm, see photos -Transport dimension: 2900/100/H470 mm Fodpfx Ajk Aubqsgrjpb -Weight: 165.5 kg

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, excavator cylinders Fpsdpfot H Tqmsx Agrob -Manufacturer: O&K, hydraulic cylinder with control valve stroke 470 mm -Type designation: 1 713 351 1554 541 -Piston rod: Ø 70 mm -Hole diameter 120/60 mm, hole spacing 970/1440 mm -Dimensions: 1160/390/H230 mm -Weight: 99 kg

Condition: used, Module converter, electronic module -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A -with: controller BELIMO SGS -Dimensions: 275/275/H225 mm -Weight: 9.7 kg Fpedpfx Ajfcl H Usgrsb