Used Okuma Lb 300 for sale (206)

Condition: ready for operation (used), Year of construction: 2000, operating hours: 30,325 h, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 625 mm, controller model: Fanuc OSP-U100M, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS Travel X-axis: 560 mm Travel Y-axis: 560 mm Travel Z-axis: 625 mm Spindle speed range: 15,000 rpm Spindle motor power: 15/11 kW Rapid traverse x/y/z: 30 m/min Dcodpsyc Uquefx Ad Njk Tool magazine positions: 40 SK40 Pallet size: 2 x 400 x 400 mm Table load capacity: 0.4 t Table indexing: 1° MACHINE DETAILS Control: Fanuc OSP-U100M Total power requirement: 49 kVA Dimensions & Weight Space required: approx. 3.2 x 2 x 2.5 m Machine weight: approx. 11 t Operating Hours Power-on hours: 87,298 h Occupancy time: 73,834 h Cutting hours: 30,325 h EQUIPMENT Chip conveyor Interface for internal coolant supply

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 0082, turning length: 1,500 mm, turning diameter: 580 mm, travel distance X-axis: 598 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,660 mm, TECHNICAL DETAILS Max. turning diameter: 580 mm Turning length: 1,500 mm Swing diameter over bed: 610 mm Swing diameter over cross slide: 580 mm Travels X-axis: 598 mm Y-axis: 230 mm Z-axis: 1,660 mm Main spindle Speed range – main spindle: 12 – 2,800 rpm Spindle bearing diameter: 150 mm Spindle bore: 110 mm Spindle nose: JIS A2-11 Drive power – main spindle: 37 (30) kW C-axis: 0.001° Feeds Rapid traverse X / Y: 12,000 mm/min Rapid traverse Z: 20,000 mm/min Rapid traverse C: 100 min⁻¹ Cutting feed rate X / Z / Y: 0.001 – 1,000 mm/rev Tool turret Type: H2 ATC Number of tool stations: 2 (1x L-Tool / 1x M-Tool) Driven stations: infinitely variable Speed range – driven tool stations: 40 – 3,000 rpm Tool shank height: 25 mm Boring bar diameter: 50 mm Tailstock Quill diameter: 120 mm Quill stroke: 170 mm Tailstock taper: MT 5 Tool magazine Number of tool stations: 50 Tool holder: MAS BT 50 Max. tool diameter: 170 mm Max. tool length: 350 mm Max. tool weight: 20 kg Magazine drive: 3.2 kW MACHINE DETAILS Control: OSP 7000 L Space requirements & Weight Approx. footprint: 6.0 x 3.2 x 3.0 m Approx. machine weight: 18.5 t Electrical data Total connected load: 53 kVA Dsdjxb Awfspfx Ad Nock Rated voltage: 400 V Number of phases: 3 P Frequency: 50 Hz EQUIPMENT Chip conveyor Central coolant system High-pressure coolant Signal lamp Hydraulic unit Steady rest Three-jaw chuck Schunk - ROTA NC 400-120 Electronic handwheel 44 assorted tool holders

Year of construction: 1998, condition: excellent (used), functionality: fully functional, TECHNICAL DETAILS X-axis travel: 720 mm Y-axis travel: 630 mm Z-axis travel: 630 mm Control system: OKUMA OSP 7000 Dcodpfxek R Tp Uj Ad Njk Pallet size: 500 x 500 mm Spindle speed: 10 - 5000 rpm Tool holder: 10-position pallet changer Tool interface: MAS BT 50 Number of tool positions: 200 EQUIPMENT - Tool breakage detector - Renishaw measuring probe - High-pressure coolant system - Coolant mist extraction system - Spindle load and torque monitoring - Thread milling - Chip conveyor The scope of delivery should be determined based on the description and not the images.

Condition: used, Year of construction: 2012, functionality: fully functional, 1 OKUMA CNC Lathe Model LT2000EX-2M1Y with OSPP200LA CNC Controller Including CE mark 1 set Dcodpfxey Rnbde Ad Nek 〈European Standard Specification〉 1-1 Spindle motor VAC 11/7.5 kw (5 min./cont. ) 2 set 1-2 Spindle speed 50 - 6,000 min-1 2 set 1-3 Spindle dia. 62/100 mm, 140 Flat nose 2 set 1-4 C-axis control, 360 degree at 0.001 degree increment 2 set 1-5 Y-axis 95mm (+50 to -45) for upper turret 1 set 1-6 Upper V16 (turning & milling) + Lower V16 (turning & milling) Radial turret (No tool holder included) 1 set 1-7 Rotary tool drive motor, PREX 5.5/3.7kw (2 min/count) 2 set 1-8 Rotary spindle speed 45-6,000 min-1 2 set 1-9 Coolant supply system, 0.8kw x 3 sets pump motor 1 set 1-10 Work light, fluorescent lamp 1 set 1-11 Totally enclosed guard 1 set 1-12 Door interlock 1 set 1-13 Chip pan, side chip disposal type 1 set 1-14 Foundation washers and leveling jack screws 1 set 1-15 Machine lifting hooks 1 set 1-16 Chuck auto open / close with confirmation 2 set 1-17 Chuck air blower 2 set 1-18 Lubrication monitor B-1 1 set 1-19 CE mark and EMC 1 set 1-20 Application for IEC standard 1 set 1-21 Double chuck operation pedal 2 set 1-22 Synchronized tapping (for LT2000EX-M) for Milling rotary tool 1 set 1-23 OSP-P200LA CNC Controller with 15" colour display, touch panel 1 set 1-24 OSP-P200LA 3D-M-E kit specifications 1 set *Multitasking machines Coordinate conversion (1 set) *Multitasking machines Profile generation (1 set) *Program storage Standard: 2GB (1 set) *Operation buffer Standard: 2MB (1 set) *Real 3D simulation (1 set) *Cycle time over check (1 set) *Load monitor (spindle, feed axis) (1 set) *NC operation monitor (incl. counter and monitoring function) (1 set) *Cycle time reduction function (1 set) *Variable spindle speed control (1 set) 1-25 Pitch error compensation X + Ys + Z 1 set 1-26 Inch / metric switchable function 1 set 1-27 Workpiece jump out detection 1 set 1-28 Status indicator lamp (2-layer lamp) instead of status indicator in 3D-E kit 1 set 1-29 Electrical power source application to suite local power source at each countries (CE transformer) 1 set 1-30 Chuck open/close during spindle rotation (LT-Standard) 1 set 1-set of tools - see last photo

Condition: used, Year of construction: 1995, turning diameter 150 mm Dcjdpfx Adeyi Hwtj Nek turning length 1250 mm control OSP 7000 L total power requirement 37 kW weight of the machine ca. 8500 t

Condition: used, Year of construction: 2001, x-travel 560 mm y-travel 460 mm Dcedpfxjyi Hv Ns Ad Nek z-travel 450 mm Control OSP U10 M total power requirement 7,5 kW weight of the machine ca. 5 t

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 760 mm, table load: 500 kg, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS X-axis travel: 760 mm Y-axis travel: 760 mm Z-axis travel: 760 mm Spindle center to table surface: 50 to 810 mm Spindle end to table center: 135 to 895 mm Table size: 500 x 500 mm Max. load capacity: 500 kg Index positions: 360 Speed range: 50 to 15,000 rpm Number of speed ranges: stepless Taper: NT No. 40 Spindle diameter: 70 mm Feed Rapid traverse (X/Y/Z): 60,000 mm/min Manual feed (X/Y/Z): 1 to 60,000 mm/min Tool changer Tool holder: Standard MAS BT40 Magazine capacity: 48 stations Max. tool diameter (adjacent positions occupied): 70 mm Max. tool diameter (adjacent positions free): 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg MACHINE DETAILS Total power requirement: 43 kW Dimensions & Weight Dedpfx Asxvq Hdsd Nock Space requirement: 2.7 x 4.73 x 2.87 m Machine weight: 11.5 t

Condition: used, turning diameter 260 mm turning length 280 mm control OSP500 1. Machine Specifications Item Unit Specification Number of controlled axes – 2 Swing diameter over bed mm Ø 450 Swing diameter over slide mm Ø 350 Swing diameter over cross slide mm Ø 300 Maximum turning diameter × length mm Ø 260 × 280 Spindle diameter mm Ø 100 Spindle nose – JIS A2-6 Spindle taper mm Ø 70 × 1/10 Spindle bore mm Ø 62 Spindle speed range rpm 35 – 4,000 Z-axis travel mm 320 Z-axis rapid traverse mm/min 20,000 X-axis travel mm 155 Dcedpfx Adowm Rrdo Njk X-axis rapid traverse mm/min 15,000 Turret type – V Number of tools – 8 (optional 12) Tool size (external turning) mm ¦ 25 Tool size (internal turning) mm Ø 40 (optional Ø 32)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller model: OSP-P200M, rotational speed (max.): 15,000 rpm, TECHNICAL DETAILS Travel X-axis: 762 mm Travel Y-axis: 460 mm Travel Z-axis: 460 mm Spindle speed range: 50 - 15,000 rpm Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 32 m/min Tool magazine: 32 positions MACHINE DETAILS Control: OSP-P200M Main drive motor: 22 kW Dimensions & Weight Required space (L x W x H): 2,850 x 2,810 x 2,750 mm Machine weight: 7,200 kg EQUIPMENT Chip conveyor Dedex I Ecyopfx Ad Njck Internal coolant supply Standard filtration unit

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 2,050 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 750 mm, number of slots in tool magazine: 36, table length: 2,200 mm, table width: 850 mm, controller model: OKUMA-OSP-HMI, coolant supply: 15 bar, distance table center to spindle nose: 950 mm, spindle motor power: 22 W, number of spindles: 36, rapid traverse Z-axis: 16 m/min, rapid traverse X-axis: 16 m/min, rapid traverse Y-axis: 16 m/min, spindle nose: BT 50, spindle speed (max.): 10,000 rpm, spindle speed (min.): 50 rpm, table load: 2,500 kg, tool diameter: 120 mm, tool length: 400 mm, tool weight: 20 g, Equipment: documentation/manual, rotational speed infinitely variable, OKUMA-OSP-HMI 3-Axis Vertical Machining Center with CNC Djdpfxeu Dinke Ad Nock

Condition: good (used), Year of construction: 2007, functionality: fully functional, turning length: 1,500 mm, turning diameter: 710 mm, Used Okuma Multus B400W Max. turning diameter Ø 710 mm Djdjyrf T Sjpfx Ad Njck Turning length 1500 mm Kuka robot 140 kg without handling attachment 2 spindles, 7 axes, loading conveyor - loading station - unloading station - 950 mm swing 12+15" chuck 70 bar high-pressure pump

Condition: ready for operation (used), Year of construction: 1998, operating hours: 7,984 h, functionality: fully functional, machine/vehicle number: 1408, turning length: 250 mm, turning diameter: 340 mm, spindle speed (max.): 4,500 rpm, bar passage: 65 mm, controller model: Okuma OSP7000L, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum turning diameter: 340 mm Maximum turning length: 250 mm Main Spindle Technology: Motor spindle Speed: 4,500 rpm Power (max.): 22 kW Bar capacity: 65 mm Workpiece clamping: 3-jaw chuck, Kitagawa B-210 Tool Turret I (X/Z) Technology: 12-station turret Tool holder: VDI40 Travel in X: 260 mm Travel in Z: 640 mm Rapid traverse in X: 15 m/min Rapid traverse in Z: 20 m/min Tool Turret II (X/Z) Technology: 8-station turret Tool holder: VDI40 Travel in X: 140 mm Travel in Z: 615 mm Rapid traverse in X: 15 m/min Rapid traverse in Z: 20 m/min MACHINE DETAILS Control: Okuma OSP7000L Dimensions & Weight Djdpfsx Hx Dnox Ad Njck Dimensions (L x W x H): 3,305 x 2,100 x 1,927 mm Weight: 4,800 kg Electrical connection data Rated voltage: 400 V Number of phases: 3 Frequency: 50 Hz Power consumption: max. 30 kVA Total current: 43.4 A Motor current: max. 106 A Operating Hours Power-on hours: 36,348 h Cutting time: 7,984 h Spindle run time: 8,674 h EQUIPMENT Chip conveyor Coolant pump Automatic measuring arm Transformer

Condition: like new (used), Year of construction: 2022, operating hours: 930 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 360 mm, controller manufacturer: Okuma, controller model: OSP P300MA + 3D kit, workpiece weight (max.): 350 kg, table width: 760 mm, table length: 460 mm, overall weight: 7,000 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 930 h, spindle motor power: 15,000 W, spindle nose: HSKA63, number of slots in tool magazine: 20, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, High precision Die/Mold vertical CNC, actively cooled frame & spindle. 0.1um control, 4 digits after the decimal point. Full options, including Renishaw, air on the spindle, laser measurement etc. See attached PDF for a detailed list including software options and accessoires. Cleaned and ready for installation. All checks allowed (at buyers expense, machine stored in warehouse), we can ask Okuma to make a test report if required. New price was 300.000 euro's, so half price for an as-new machine with only 930 hours! Dcjdpfowzzrkex Ad Njk

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: M08L/8356, Offer Number: M08L/8356 Machinetype: 4 die - 4 blow transfer header Info: bushing cut-off , PKO Make: ASAHI OKUMA Type: AF1513-4 Constr. year: 1988 Dsdpfowi S A Ajx Ad Njck diameter range: 7-15 mm number of dies: 4 number of stations (incl. cut off): 5 cutting length: 10-160 mm shaft length under head: 15-130 mm output - pieces/min: 130 press power: 150 to Location: In our warehouse

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: M08L/8328, Offer Number: M08L/8328 Machinetype: 2 die - 3 blow transfer header Info: bushing cut-off , PKO Make: ASAHI OKUMA Type: RH60 Constr. year: 1988 diameter range: 8,5 mm number of dies: 2 number of stations: 4 cutting length: 55 mm shaft length under head: 55 mm output - pieces/min: 200 press power: 30 to Dcjdpewi S Aiofx Ad Nok Location: In our warehouse

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: M08L/8001, Offer Number: M08L/8001 Machinetype: 2 die - 3 blow transfer header Info: bushing cut-off , PKO in 2nd and 3rd Make: ASAHI OKUMA Type: ORH120 Constr. year: 1988 diameter range: 14 mm number of dies: 2 number of stations (incl. cut off): 4 cutting length: 100 mm shaft length under head: 90 mm output - pieces/min: 100 Dcsdpfowi S Rajx Ad Njk press power: 120 to Location: In our warehouse

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: M08L/8327, Offer Number: M08L/8327 Machinetype: 2 die - 3 blow transfer header Info: bushing cut-off , PKO Make: ASAHI OKUMA Type: RH60 Constr. year: 1989 diameter range: 3-8,5 mm number of dies: 2 number of stations: 4 cutting length: 55 mm shaft length under head: 55 mm Djdpfx Aswi S Aped Neck output - pieces/min: 200 press power: 30 to Location: In our warehouse

Condition: good (used), Year of construction: 2007, Used OKUMA lathe - Model: LT200-M TwinStar - Year: 2007 Djdpfjv S Svvox Ad Neck - including chip conveyor - coolant tank - immediately available

Condition: good (used), Year of construction: 2006, Used lathe by OKUMA Djdev S Su Sopfx Ad Neck - Model: LT 200-M TwinStar - Year of manufacture: 2006

Condition: ready for operation (used), Year of construction: 2000, General Data Machine weight 14500 kg Movement X-Axis Movement 350 mm Z-Axis Movement 410 mm Dodpfx Aox D Dwrsd Nsck Main Drive Number of axis 2 Spindle Speed 2500 RPM This Okuma 2SP-V35 was manufactured in 2000. A robust vertical turning machine featuring a max turning diameter of 350 mm and height of 410 mm. It includes a spindle speed up to 2,500 RPM and a 12-station tool holder. Ideal for precise, heavy-duty turning operations. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 2008, - Max. turning diameter over bed: 700 mm - Turning length: 1,500 mm Main spindle: - Speed range: 2,800 rpm - Enlarged main spindle: Ø 150 mm, bore: 110 mm - Drive power: 30 kW, 900 Nm - Spindle nose: Size 11 Total power requirement: 59.5 kVA Approx. machine weight: 14.5 t Space requirement approx.: 6.4 x 3.0 x 2.6 m EQUIPMENT: - 3-jaw chuck, SMW KNCS-N 400 K11 - Tailstock - Programmable CNC steady rest slide (cross slide NOT retractable) - SMW-AUTOBLOK SLU-3, self-centering steady rest, clamping range Ø 12 - 152 mm - Full clamping cylinder for partial hollow clamping, draw tube bore max. Ø 100 mm - In-process measuring system Renishaw for X-/Z-/C-axis Dsdpfexmirgex Ad Nock - Programmable CNC tailstock on W-axis - Drilling/milling spindle and C-axis 0.001° - Tool changer: 80 positions Tool system: HSK-A63 - Y-axis travel +115/-115 = 230 mm - B-axis 225°, positioning in 0.001° increments - ICS / internal coolant supply for driven tools - Synchronized thread cutting with driven tools - Software for use of multifunctional tools, e.g. special tool with radially arranged indexable inserts, which can be positioned in the drilling/milling spindle at 60°, 90°, 120° and 180° positions - Software for gear hobbing for straight and helical gearing with speed synchronization of main and milling spindles - Electrostatic extraction unit - Chip conveyor - Documentation - CE marking

Condition: excellent (used), functionality: fully functional, Commissioning: as Okuma stock machine 09.2017 Control OSP P300S Machine Equipment ▪ Enlarged main spindle KK size 11 Front bearing Ø 160 mm Speed range 3,000 rpm Bore Ø 112 mm Motor with 32 kW output Torque 955 Nm ▪ Hollow clamping cylinder Ø 127 mm SMW VNK 320-127 with bore Ø 127 mm ▪ Pressure reducing valve Adjustable range 8-70 bar ▪ Tailstock ▪ Turning length approx. 1500 mm ▪ H1 turret (1 station) ▪ Y-axis ▪ B-axis 0.001° ▪ 40-station tool magazine ▪ Additionally: lower turret with 12 stations ▪ Tool spindle 12,000 rpm ▪ Hinged belt chip conveyor: high-performance chip conveyor with low-maintenance self-cleaning function ▪ Drum sump filter TMF300 with clean tank 980 l ▪ Supply pump TC160/740, 8 bar ▪ Supply pump RSP 20/32-070-1-1-0, 70 bar ▪ Self-centering steady rest on the lower turret (not possible in combination with driven tools for the lower turret) ▪ Automatic door ▪ Robot interface type E for connecting other loading and unloading systems to single-spindle machines ▪ 3D machine model for simulation in a CAM system Technical Details ▪ Main drive (Okuma motor spindle): 22 kW / 700 Nm / 50–4,200 rpm Spindle nose KK size 8 Front spindle bearing Ø 140 mm Spindle bore Ø 91 mm Speed range: 2-stage Range switching at full speed ▪ Lower turret: 12 stations Dcjdpfx Adoyviige Nek In ZB-axis with cylindrical roller guide In XB-axis with slide guide ▪ Real-time collision avoidance system CAS ▪ 19" color LCD TFT (1280x1024) with 3D color graphics as touchscreen/panel with vertical display and tiltable keyboard (adjustable angle) ▪ Second operating system Windows 7 for operation and data communication, open and freely usable for Windows 7 compatible applications ▪ Programmable tailstock on W-axis with hydraulic quill ▪ Tool magazine 40 stations ▪ C-axis 360° Positioning in 0.001° steps ▪ Y-axis with travel +150/-150 = 300 mm ▪ B-axis 240° Positioning in 0.001° steps ▪ Tool spindle (Okuma motor spindle): 22 kW / 120 Nm / 12,000 rpm ▪ Internal coolant supply for rotating tools, pump with max. pressure 20 bar Including bag filter, external cooling tool spindle, pump with max. pressure 3 bar ▪ Tool system HSK-A63 ▪ Tool monitoring system for tool life and breakage ▪ Tool measurement system (with standard chuck) for safe setup ▪ Machine management MacMan with integrated BDE (operating data acquisition) ▪ Parts program memory 2 GB ▪ Max. length individual part program 2 MB ▪ 2 USB 2.0 ports ▪ Ethernet interface with browser and DNC-T1 for program transfer ▪ Harmonic speed oscillation via periodic speed change ▪ Tool height correction in Y-axis for turning tools ▪ Circular thread milling X/Z/Y/B (helical interpolation) Including eccentric milling X/Y/C ▪ Hi-Cut Pro high-speed control for rotating tools ▪ 10 workpiece zero points (coordinate system selection) ▪ Coordinate conversion (shift, rotate) ▪ Electronic spindle orientation + / - 0.1°

Year of construction: 2001, condition: ready for operation (used), A CNC lathe Okuma Soarer L270E is offered. Turning length: 500mm, turning diameter over bed: 530mm, max. spindle speed: 4200rpm, machine dimensions X/Y/Z: approx. 2800mm/1850mm/2000mm, weight: approx. 3700kg, control: OSP-U10L. Functional, spindle may need to be replaced. An on-site inspection is possible by appointment. Dcsdpfx Adjxph Sqe Nek

Year of construction: 1988, condition: ready for operation (used), Turning diameter over bed/slide: 520mm/340mm, turning length: 850mm, speed: 3500rpm, spindle bore: 70mm, chuck diameter: 315mm, bar capacity: 70mm. Machine weight: approx. 7500kg, control: OSP 500L. Documentation available. On-site inspection is possible. Dcedpfx Aewz N Tcsd Njk

Condition: ready for operation (used), A CNC slant bed lathe Okuma is available. Chuck diameter: 200mm, swing diameter: 400mm, turning diameter: 300mm, turning length: 470mm, tool stations: 8. Machine dimensions X/Y/Z: approx. 4000mm/2150mm/2150mm, weight: approx. 5500kg, control: OSP 3000 L. Documentation available. An on site inspection is possible. Djdpfxsyttwze Ad Nock