CNC Lathe

OKUMA LCC 15

Condition: good (used), turning diameter over cross slide: 380 mm, spindle bore: 70 mm, turning diameter: 640 mm, turning diameter over bed slide: 900 mm, Characteristics: Length between points: 2.000mm Diameter admitted on bed: 640mm Gtjdpfx Abeudh Slsrou Diameter admitted on carriage: 380mm Diameter admitted on neckline: 900mm Shank pitch: 70mm Includes: 400mm 3-jaw chuck 390mm 4 independent jaw chuck Open steady rest and closed steady rest Quick-change toolholder with 4 tool holders.

Condition: used, Year of construction: 1995, CNC Universal Milling Machine Manufacturer: HERMLE Model: UWF 902 S Year of manufacture: 1995 Operating hours: 65,071 Control unit: HEIDENHAIN TNC 426 Working area X/Y/Z: 600 x 450 x 500 mm Speed range: 20 – 6,300 rpm Tool holder: SK 40 M & H 3D probe (for workpiece sensing) Gjdsv Rxa Sspfx Abrjtu Vertical-horizontal milling device Quill feed Coolant system Angle table: 900 x 458 mm Weight: 4,000 kg Machine dimensions (LxWxH, approx.): 3,900 x 2,000 x 2,000 mm Ref.: 3226

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Control: Mazatrol M Plus Travel paths: x-1660 y-760 z-660 mm Clamping surface to spindle head: 155 – 815 mm Distance from column to spindle center: 808 mm Spindle inner taper: SK 40 Tool changer: 24 – compartment Spindle speeds: 7000 rpm Usable table area: 2000 x 760 mm Table load: 1000 kg Rapid traverse x, y axis: 24000 mm/min Rapid traverse z axis: 20000 mm/min Feed: 1 – 5000 mm/min Machine weight: approx. 8700 kg Gtjdpfevrxd Hex Abreu including chip conveyor, coolant system The machine can be inspected under power.

Condition: new, range L-W-H 790 x 460 x 960 mm weight 70 kg 7 St. Tool trolley with 7 drawers equipped with tools - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - Drawer 1 1/4" premium ratchet. 1/4" knee joint 45 mm. 1/4" extension 100mm. 1/4" socket wrench 4, 4.5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm. 1/4" long buttons 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 mm. 3/8" premium ratchet. 3/8" knee joint 55 mm. 3/8" extension 150mm. 3/8" socket wrench 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm. 3/8" long socket wrenches 10, 11, 12, 13, 14, 15, 17, 19 mm. 1/2" premium ratchet. 1/2" knee joint 75 mm. 1/2" extension 125mm. 1/2" Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 22, 24, 27, 30, 32mm. 1/2" Long Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22mm. - DRAWER 2 Ring, ratchet and socket wrench set consisting of. Sockets 8, 9, 10, 11, 12, 14, 15, 16, 17, 19, 21, 22, 24, 27, 30mm. - DRAWER 3 1/4" arbor drill TT8, TT9, TT110, TT20, TT25, TT27, TT30, TT40. 1/4" plug-in bits T8, T9, T10, T15, T20, T25, T27, T30, T40. 1/4" plug-in bits HW3, HW4, HW5, HW6, HW7, HW8. 1/4" recording bits S0, S1, S2, S3, S4. 1/4" locating drill V6, V8, V10. 1/4" locating drill H6. 1/4" receiving bits FD4, FD5.5, FD6, FD7. 1/4" recording bits PH1, PH2, PH3. 1/4" pickup bits PZ0, PZ1, PZ2, PZ3. 1/4" recording bits H2, H4, H5. 8mm locating bits PZ1, PZ2, PZ3, PZ4. 8mm locating bits PH1, PH2, PH3, PH4. 8mm locating bits T20, T27, T30, T35, T40, T45. 8mm locating bits SL 4, SL5.5, SL6, SL6.5. 8mm allen bits Allen 7, 8, 10. 1/2" recording bits M18 Spline (POWER) 1/2" plug-in bits H14, H17, H19, H22, H24. 1/2" locating bits M16 Spline. 1/2" arbor M16 Spline 100 mm long. 1/2" locating drill T80 - 100 mm long. 1/2" pick-up bits M9, M16 - 100 mm long. 1/2" locating drill R9 - 100 mm long. 1/2" Pick-up Bits R10 - 140mm long. 1/2" drill T40, T45, T50, T55, T60, T70 - 140 mm long. 1/2" drill H10, H11, H13 - 140 mm long. 1/2" drill M10, M12, M14 - 140 mm long. 1/2" locating drill H5 - 160 mm long. 1/2" pickup bits H7 - 230mm long. Godpfx Aju Imnpebrjtu 1/2" locating drill R7, R8 - 230 mm long. 1/2" locating drill H7 - 230mm long. 1/2" locating drill T30 - 300 mm long. 1/2" adapter to 10 mm square. - DRAWER 4 screwdriver flat. 2.5x50, 3x75, 5x100, 6x100. screwdriver cross. PH 2.5x50, 4x75, 5x75, 6x100, 8x150. Impact Screwdriver Plat. 5x75, 6x100, 8x150, 6x38 Stubby. Cross Impact Screwdriver. 5x75, 6x100, 8x150, 6x38 Stubby. - Drawer 5 T-handle Allen with ball head. 2x100, 2.5x100, 3x100, 4x150, 4.5x150, 5x150, 6x150, 8x200, 10x200mm. T-handle Allen. 2x100, 2.5x100, 3x100, 4x150, 4.5x150, 5x150, 6x150, 8x200, 10x200mm. - DRAWER 6 Water pump pliers 250 mm. Combination pliers 150 mm. Needle nose pliers 150 mm. Curved pliers 150 mm. Side cutters 150 mm. Inner curved sealing pliers 170 mm. External curved sealing pliers 170 mm. External sealing pliers 180 mm. Sealing pliers 1.5 x 102, 2 x 102, 3 x 114, 4 x 127, 5 x 127, 6 x 140 mm, Claw hammer with fiberglass handle. - DRAWER 7 Socket wrench 6mm. Socket wrench 7mm. Socket wrench 8mm. Socket wrench 10mm. Socket wrench 11mm. Socket wrench 12mm. Socket wrench 13mm. Socket wrench 14mm. Socket wrench 15mm.

Condition: refurbished (used), Year of construction: 2001, NICE MACHINE REFURBISHED Gtodpfoxc Elhox Abrou

Condition: used, Year of construction: 2005, functionality: fully functional, travel distance Z-axis: 1,219 mm, rotational speed (max.): 2,000 rpm, travel distance cross slide: 203 mm, Flatbed Lathe Manufacturer: Haas Type: TL-2 S/N: XXXXX Year of Manufacture: 08-2005 On-time hours: n/a Control: Haas CNC Technical Parameters: ----- - 4-way tool post with Parat quick change system - Z travel: 1,219 mm - X travel: 203 mm Gjdewftdmspfx Abretu - Swing over bed: 406 mm - Swing over slide: 282 mm - Spindle bore: 76 mm - Spindle speeds: 10 - 2,000 rpm - Coolant system - Tailstock / MT 4 - Weight: 2,100 kg Accessories: ----- - 3 Parat cartridges - 3-jaw chuck - Documentation

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1148877, Specification Table size 1016mm x 356mm X axis traverse 508mm Y axis traverse 406mm Z axis traverse 356mm Spindle BT40 Spindle speeds 0-10,000rpm Spindle motor 11.2kW Rapid feed rate 30.5m/min Toolchanger capacity 20 Tools Approximate weight 2313Kg   Machine Equipped with Haas CNC Control High flow coolant system Lighting Enclosed guarding Gjdpfxox Afpgj Abretu Manual

Condition: used, Year of construction: 2004, MAZAK QUICK TURN NEXUS 200-M CNC LATHE Mazak Quick Turn Nexus 200 M CNC lathe with Mazatrol Nexus 640T control, a new 8” power chuck with big bore to take 80mm, tool setter, parts catcher, swarf conveyor, suit of tool holders, collet chuck and barfeed interface Gtedowx Nl Hspfx Abrsu * Note: Photographed on arrival…awaits cleaning & prep. Specification: Maximum Swing 675 mm / 26.57 in Maximum Machining Diameter 380 mm / 14.960 in Maximum Bar Work Capacity 65 mm / 2.6 in Maximum Machining Length 541 mm / 21.300 in Main Spindle Chuck Size 8 in -with big bore Maximum Speed 5000 rpm Motor Output (30-minute rating) 19 kw / 25.0 hp Turret (Upper) Number of Tools 12 Maximum Speed 4500 rpm Motor Output (5-minute rating) 6 kw / 7.5 hp Feed Axes Travel (X Axis) 230 mm / 9.06 in Travel (Z Axis) 575 mm / 22.64 in

Condition: excellent (used), pressure 0,5 - 20 t max. workpiece diameter 5 - 75 mm threading length 2000 mm pitch in mm 8 mm diameter of roll spindle taper 69,85 tool diameter 200 mm roll spindle turning speed range 20 - 90 U/min stroke 0 - 20 mm total power requirement 7,5 kW weight of the machine ca. 3,1 t dimensions of the machine ca. 1,9 x 1,1 x 1,2 m Gjdpfx Aevpaa Rsbrotu

Condition: good (used), Year of construction: 1963, Vertical lathe JUNGENTHAL Type: DK 1400 built in 1963 with 1 axis digital readout. turning diameter max : 1400 mm face plate : 1250 mm Gtedpfx Aovi Hryebrju Automatic turret head spindle speed : 3,5-180 rpm feeds : 0,063 - 3,15 mm/rev rapid traverse : 1800 mm/min Further data see data sheet Machine documentation available . Dimensions : Length 4 m Width 2,4 m Height 3 m Weight 16t Good general condition .