Used Okuma Lt 10 M for sale (226)

Condition: like new (used), Year of construction: 2024, functionality: fully functional, maximum turning diameter: 2000 mm maximum turning length: 1400 mm control: Okuma OSP - P300 SA maximum workpiece weight: 10,000 kg maximum workpiece dimensions: 2000 mm x 1400 mm chuck diameter: 2000 mm C-axis positionable to 0.001° tool spindle traversable in X/Y/Z and indexable in B B-axis swivels 150° Y-axis travel: 1600 mm (+/- 800 mm) coolant supply through tool spindle automatic dual pallet changer Gbjdpoywg Aasfx Aa Ask tool stations: 60, HSK 100 The complete equipment of the machine can be found in the .pdf file.

Condition: used, Year of construction: 2001, turning diameter 80 mm turning length 800 mm control OSP-U100L total power requirement 22 kW Gbsdpfx Aeymgcdoa Ask weight of the machine ca. 6,3 t

Condition: used, Year of construction: 2007, operating hours: 20,000 h, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 625 mm, nominal power (apparent): 49 kVA, controller manufacturer: Okuma, controller model: OSP-P200M, table width: 400 mm, table length: 400 mm, table load: 400 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 58,000 h, coolant supply: 30 bar, spindle motor power: 22,000 W, spindle nose: SK40 Big Plus, number of spindles: 1, number of slots in tool magazine: 100, input voltage: 400 V, type of input current: three-phase, pallet changer: automatic, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Well-maintained 3-axis Okuma MA-400HA horizontal machining center for sale The Z-axis module requires an overhaul. If more than 30% of the maximum rapid traverse speed is selected, the axis does not move. The machine is still in daily production and can be inspected at any time. The machine is offered including: - 100 SK tool holders (without tools) included - Renishaw OMP60 measuring system incl. probe and module (for tool breakage control and tool length measurement via mechanical touch sensor) - Expanded control options (larger storage for offsets, tool corrections, axis mirroring, manual measurement, scaling up/down) - DNC-DT interface - 30 bar through-spindle coolant supply Gbsdpoyvga Uofx Aa Ajk - 6 pallets incl. fixtures for machining round parts. Smallest fixture diameter 160mm, largest fixture diameter 370mm - Mayfran Consep 2000 II chip conveyor including nonwoven-free coolant filtration system

Condition: like new (used), Year of construction: 2022, operating hours: 930 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 360 mm, controller manufacturer: Okuma, controller model: OSP P300MA + 3D kit, workpiece weight (max.): 350 kg, table width: 760 mm, table length: 460 mm, overall weight: 7,000 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 930 h, spindle motor power: 15,000 W, spindle nose: HSKA63, number of slots in tool magazine: 20, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, High precision Die/Mold vertical CNC, actively cooled frame & spindle. 0.1um control, 4 digits after the decimal point. Full options, including Renishaw, air on the spindle, laser measurement etc. See attached PDF for a detailed list including software options and accessoires. Cleaned and ready for installation. All checks allowed (at buyers expense, machine stored in warehouse), we can ask Okuma to make a test report if required. New price was 300.000 euro's, so half price for an as-new machine with only 930 hours! Gbjdpfxswzzrkj Aa Ajk

Condition: good (used), Year of construction: 2005, The machine has been maintained annually under a service contract with Okuma. Okuma Mac Turn 550 W Year of manufacture: 2005 Control: OSP-E 100 L Max. turning diameter: 720 mm Distance between tailstock tip and spindle nose: 2,505 mm Y axis travel: 250 mm Main spindle speed: up to 3,500 rpm Spindle motor power: 30 kW Lower turret with 12 stations Milling spindle with infinitely variable B axis 80-position tool magazine HSK 100 tool holder 3-jaw chuck, diameter: 315 mm In 2023, the cable carrier for the W axis including all hoses was replaced. In October 2024, the linear guides for X/Y/Z axes were renewed. All work was carried out by Okuma. The machine was cleaned. Covers and sheet metal parts were dismantled. 8th axis dismantled. Gedpfjyt Nvtjx Aa Aobk Travelling column dismantled and removed from the machine. ATC dismantled and removed from the machine. All linear guides removed. Mating surfaces of the ZA axis cleaned. New ZA axis linear guide incl. carriages installed and secured at specified torque. New ZA axis ballscrew incl. bearings installed. Base plate for the travelling column installed and secured at specified torque, respectively fastened to carriages. Lubrication lines connected. ATC including auxiliary components reinstalled and connected. New YA and XA linear guides installed and tightened to specification. New YA axis ballscrew with bearings installed. Travelling column installed and lubrication lines connected. XA base plate installed and aligned. 8th axis installed and aligned. H1 turret mounted - Install drive motor for 8th axis - Assemble 8th axis and new H1, set geometry - Function test for 8th axis and H1 - Run-in program for B axis approx. 12 hours, then drain old oil from 8th axis - Run-in program for H1 and create defect report for OEG - Install left door, adjust various covers - Install chuck - Adjust zero points - Check tool change

Condition: good (used), Year of construction: 2004, CNC turning and milling center with 9 CNC axes, Okuma Mac Turn 350 W, year of manufacture 2004, OSP-E 100L, 80 WW fac, HSK 63 holder, stepless B-axis as milling spindle, lower 12-station turret with live tooling, Interlite compact filter system 900 l, extraction, spindle hours approx. 18,300 h, chip conveyor, tool changer gripper arm completely renewed, high-pressure cooling, tool measuring arm, tool changer overhauled, main spindle Kitagawa B - 210, sub spindle Kitagawa B - 208. Godpjyt H U Tefx Aa Aobk

Condition: used, Year of construction: 2001, x-travel 560 mm Gbjdpfjyi Hv Nsx Aa Aok y-travel 460 mm z-travel 450 mm Control OSP U10 M total power requirement 7,5 kW weight of the machine ca. 5 t

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: OSP5000M-G, OKUMA MC-30VA vertical machining center, high-reliability Japanese machine. Fully operational and complete machine, in use until recently. Main features: • Brand: OKUMA • Model: MC-30VA Gbsdpoyt E H Ujfx Aa Aok • CNC Control: OSP5000M-G • Year: 1988 • Vertical machining center with automatic tool changer • Very robust structure, typical of Japanese machines • Complete and non-cannibalized machine The machine can be seen under power at our workshop. Ideal for: • machine shops • technical schools • export to foreign markets • general machining purposes Condition: operational. Sold as is. Loading and transport at buyer's expense.

Year of construction: 2007, condition: excellent (used), X AXIS: 762 MM Y AXIS: 560 MM Z AXIS: 460 MM SPINDLE SPEED: 15,000 RPM SPINDLE CONE: BT 40 TABLE DIMENSION: 460 X 760 MM MAXIMUM LOAD: 400 KG RAPID FEEDS X/Y AXIS: 40,000 MM/MIN Z AXIS RAPID FEEDS: 32,000 MM/MIN WORKING FEED: 32,000 MM/MIN Godpfspyg Rkjx Aa Ajbk TOOL WAREHOUSE: 20 PLACES TOOL CHANGE TIME: 1.2 SEC – 3.8 SEC MAXIMUM TOOL WEIGHT: 8 KG MAXIMUM TOOL LENGTH: 300 MM CONTROL: OSP-P200M

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, turning length: 650 mm, turning diameter: 420 mm, travel distance X-axis: 300 mm, travel distance Z-axis: 675 mm, overall weight: 5,500 kg, Machine Equipment ▪ Interior suction system by Hengst Filtration (year of manufacture 2023) ▪ Touchsetter, tool measurement ▪ C-axis (main spindle) ▪ Tool breakage and wear monitoring ▪ 3-jaw chuck, Kitagawa B210, Ø250 mm ▪ Tailstock available ▪ Coolant supply, including through-tool supply ▪ Dialog programming IGF ▪ Chip conveyor (scraper type) Technical Details ▪ Max. turning length: 650 mm ▪ Max. turning diameter: 420 mm ▪ X-axis travel: 300 mm ▪ Z-axis travel: 675 mm ▪ C-axis travel: 360° Gedjypkzijpfx Aa Aebk ▪ Chuck passage: 72 mm ▪ Spindle bore: 95 mm ▪ Clamping cylinder bore: 95 mm ▪ Tool holder: VDI 40 ▪ Number of tool stations: 12 ▪ Spindle speed: 2,800 rpm ▪ Main spindle power: 22/30 kW ▪ M-spindle – driven stations: 12 ▪ M-spindle power: 5.5 kW ▪ M-spindle speed: 3,000 rpm ▪ Machine dimensions without accessories (LxW): approx. 2,700 x 1,900 mm ▪ Machine height: approx. 1,885 mm ▪ Weight: approx. 5,500 kg Options ▪ Organization and execution of transport ▪ Machine delivery and installation ▪ Machine commissioning

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 560 mm, Machine type: Horizontal Machining Center Manufacturer: Okuma Model: MA-40HA Year of manufacture: 2001 Control: OSP-U100M Spindle hours: 21,478 Country of origin: Japan Delivery time: ex-stock • In excellent condition! • Well maintained! • Immediately ready for operation! Machine Equipment - Number of axes: 4 - Spindle speed: 15,000 rpm - Touch setter (tool breakage control and tool measurement) - 2-pallet automatic pallet changer (APC) - ATC magazine with 60 tool positions - Through-spindle coolant (cooling system), bag filter system 20 bar - Signal tower - Chip conveyor Technical Data - Travels X-axis 560 mm Y-axis 610 mm Z-axis 560 mm Spindle center to pallet surface 50~660 mm Spindle nose to pallet center 150~710 mm - Table Pallet size: 400 x 400 mm Max. load capacity: 400 kg Max. workpiece size: 600 x 710 mm Indexing time 2.3 sec. (90°), 3.0 sec. (180°) - Spindle BT40 Bearing diameter: 70 mm Speed: 15,000 rpm - Feed rate (X, Y, Z) 40,000 mm/min - Motor Spindle: 15/11 kW - ATC Magazine capacity: 60 tools Tool type: BT40 Max. tool length: 300 mm Max. tool weight: 10 kg - APC Gbsdoycguxjpfx Aa Aok Pallet changer: 2-station Pallet change time: 7 sec. - Power 45 kVA Machine dimensions: approx. 2,480 x 4,164 mm Machine height: approx. 2,720 mm Weight: approx. 10,000 kg Optional Transport organization and execution Machine installation and setup Machine commissioning and handover ready for production

Condition: used, Year of construction: 2004, power: 37 kW (50.31 HP), travel distance X-axis: 1,000 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Okuma, total height: 3,280 mm, total length: 6,500 mm, total width: 3,460 mm, table width: 630 mm, controller model: OSP-E100M, spindle speed (min.): 12,000 rpm, table height: 630 mm, Okuma MA-600 HB Space Center OSP E 100M control Dimensions pallet 630 x 630 mm Number of pallets 2x X-axis travel 1000 mm Y-axis travel: 950 mm Z-axis travel 1000 mm Indexing of table 1° Spindle holder MAS BT 50 Spindle speed 12,000 rpm Spindle motor 37/26 kW Positions in the tool magazine 60 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock. Gjdpfxsydd Hbe Aa Aobk

Condition: ready for operation (used), Year of construction: 2000, operating hours: 30,325 h, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 625 mm, controller model: Fanuc OSP-U100M, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS Travel X-axis: 560 mm Travel Y-axis: 560 mm Travel Z-axis: 625 mm Spindle speed range: 15,000 rpm Spindle motor power: 15/11 kW Rapid traverse x/y/z: 30 m/min Tool magazine positions: 40 SK40 Pallet size: 2 x 400 x 400 mm Table load capacity: 0.4 t Table indexing: 1° MACHINE DETAILS Control: Fanuc OSP-U100M Total power requirement: 49 kVA Dimensions & Weight Space required: approx. 3.2 x 2 x 2.5 m Machine weight: approx. 11 t Gbedoyc Uquopfx Aa Ask Operating Hours Power-on hours: 87,298 h Occupancy time: 73,834 h Cutting hours: 30,325 h EQUIPMENT Chip conveyor Interface for internal coolant supply

Condition: used, functionality: fully functional, Swing diameter over bed: Ø 450 mm Swing diameter over carriage: Ø 280 mm Max. swing diameter: Ø 280 mm Turning length: 450 mm Distance between centers: 450 mm Speed range: stepless variable, approx. 50 – 5000 rpm Turret: 1x 8 tool positions 1x 12 tool positions Tool system: VDI-30 Travels: X-axis travel: 120 + 25 mm Z-axis travel: 450 mm Gjdpoxg Itvofx Aa Aebk Rapid traverse: 12 m/min Motors & Electrical: Spindle motor: approx. 5.5 / 7.5 kW (continuous / 30 min) Total connected load: 29 kVA Power supply: 380V, 3-phase, 50 Hz Full load current: 44 A Weight & Dimensions: Machine weight: approx. 4,800 kg Dimensions (L×W×H): 2,985 × 1,720 × 1,850 mm

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 156592, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 171, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X/Y/Z: 1,000 x 900 x 1,000 mm Pallet size: 630 x 630 mm Number of pallets: 2 Max. workpiece size: 1,000 mm diameter x 1,000 mm height Max. workpiece weight: 1,200 kg Spindle power: 40 HP Spindle speed: 6,000 rpm Tool magazine: 171 positions Gsdpewu Epajfx Aa Aebk Spindle taper: DIN50 EQUIPMENT - Coolant supply through spindle - Chip conveyor

Condition: used, Year of construction: 2019, 2019 OKUMA MA600HII 4-Axis Milling Machine with OSP P300M Control, 630 x 630mm Table max loads up to 1,200kg, high-speed Spindle 12,000rpm, Traverse Speed 60m/min, full-size Tool Magazine with 171 Stations, X Axis Travel 1000, Z Axis Travel 1000, Y Axis Travel 900. S/No. 224574 (2019) Gjdpfx Aaoyplrpe Aobk A charge of €4500 for preparation and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Location: These lots are located in Mielec, Poland. Please visit our website for more details. Auction 3459

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, OKUMA V-Turn LVT 400 CNC Vertical Turning Lathe (2 machine cell) Model: LVT 400 Gbodpfx Aexwy S Esa Ajk Control: OKUMA OSP 1000L Year: 2006 12 – tool turrets Hi – Power 60 Bar High Pressure coolant Swarf Conveyor Work Measurement Carousel System linking with both machines with turnover station

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Controller OKUMA OSP P200-M Table size 1000 x 460 mm Godpjuu Rwyofx Aa Ajbk Table load 700 kgs X travel 762 mm Y travel 460 mm Z travel 460 mm Spindle speed 15000 rpm Tool holder type MAS BT40 ATC magazin 20-fold Weight 6500 kgs Dimensions LxWxH = 2750 x 2160 x 2715 mm Features, accessories - Chip conveyor - Coolant unit - Spindle cooler - CTS - Manuals Very good condition.It will be sold because of liquidation of production.

Condition: used, Year of construction: 1989, x-travel 650 mm y-travel 410 mm z-travel 450 mm travel x vor 1000 mm Gbodpfxox U A Rne Aa Ajk control mc4va

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 2,050 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 750 mm, number of slots in tool magazine: 36, table length: 2,200 mm, table width: 850 mm, controller model: OKUMA-OSP-HMI, coolant supply: 15 bar, distance table center to spindle nose: 950 mm, spindle motor power: 22 W, number of spindles: 36, rapid traverse Z-axis: 16 m/min, rapid traverse X-axis: 16 m/min, rapid traverse Y-axis: 16 m/min, spindle nose: BT 50, spindle speed (max.): 10,000 rpm, spindle speed (min.): 50 rpm, table load: 2,500 kg, tool diameter: 120 mm, tool length: 400 mm, tool weight: 20 g, Equipment: documentation/manual, rotational speed infinitely variable, OKUMA-OSP-HMI 3-Axis Vertical Machining Center with CNC Gbodpju Dinksfx Aa Ask

Condition: used, Year of construction: 2002, operating hours: 10,500 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller manufacturer: Okuma, controller model: U100, spindle speed (max.): 8,000 rpm, coolant supply: 12 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Okuma MB46 from 2002 Low operating hours! Machine can be inspected under power. Gjdpfx Aaewt Dqae Ajbk 32 tools BT40 Scraper belt conveyor Internal cooling 8 bar 8,000 rpm 4th axis included

Condition: good (used), Year of construction: 2004, Opportunity to buy a 5 axis OKUMA machining center with EROWA automation. Including: EROWA Robot Easy automatic loading cell Chip conveyor Heavier coolant pump Higher Spindle speed Automatic measurement system for tool length, diameter setting, and tool breakage detection with a Renishaw laser Automatic measurement function, Renishaw MP10, BT40 Full technical specifications in the attached document. This machine is in very good condition and can be inspected under power upon appointment. Availability: 03/2026 Gbsdpoyfht Uefx Aa Ajk CNC control Okuma OSP-E100M X-axis 762 mm Y axis 460mm Z axis 460mm C axis 360° Table size 400 mm Table load 300 kg Spindle mounting BT40 Big plus spindle Tool changer capacity 32 positions Spindle speed 50-15,000 rpm Spindle hours approx 42000h Cutting hours approx. 38000h Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 100277, turning diameter: 340 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 280 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 500 mm, TECHNICAL DETAILS X-axis: 280 mm Y-axis: 120 mm Z-axis: 500 mm C-axis: 360° (0.0001°) Spindle speed: 4,500 rpm Spindle bore: 62 mm Chuck diameter: 10 inches MACHINE DETAILS Gbodpfx Asx I Axrja Aok Control: OSP U 100 L Weight: 6,000 kg EQUIPMENT Driven tools Chip conveyor Transformer Manuals

Condition: ready for operation (used), Okuma Opus 5000 II Main Board II A E4809-045-086-A, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Godpfx Aoi Ecayoa Asbk

Condition: ready for operation (used), Okuma BL-D30A Servo Drive SN: 22-100 , serial no. according to photo ,used, normal signs of wear, 100% functional Gbjdpfx Aoi Ecacoa Aok