Used Okuma Mb 46 Vae for sale (226)

Condition: good (used), spindle bore: 260 mm, spindle speed (max.): 900 rpm, travel distance X-axis: 3,200 mm, total height: 3,409 mm, total length: 9,800 mm, total width: 3,609 mm, feed length Z-axis: 530 mm, overall weight: 34,000 kg, CNC Lathe with c-axis Okuma - LU-45M SuperBigBore MACH-ID 9778 Make: Okuma Type: LU-45M SuperBigBore Control: OSP-P200L X-Axis: 3200mm Z-Axis: 530mm Spindle bore:260mm Speedrange: 900Rpm Length: 9800mm Width: 3609mm Height: 3409mm Weight: 34000kg Tedpfxoztctqj Afxob Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2015, overall weight: 5,500 kg, OKUMA OSP-P300L-R control unit, with TOP AUTOMAZIONI XFS370 bar feed system. Workholding and tooling are not included. AVAILABLE IN NOVEMBER 2026. Tedpfxszxrx To Afxjb

Condition: good (used), Year of construction: 2007, Used OKUMA lathe - Model: LT200-M TwinStar Tsdpfxev S Svvj Afxob - Year: 2007 - including chip conveyor - coolant tank - immediately available

Condition: good (used), Year of construction: 2000, functionality: fully functional, Technical details turning diameter 420 mm turning length 650 mm control Okuma OSP-U100L spindle bore 95 mm spindle turning speed range 2800 U/min travel -x axis 300 mm travel -z axis 675 mm main drive motor 22/30 kW weight of the machine ca. 5,5 t dimensions of the machine ca. 2700 x 1900 x 1885 mm Additional information First put into operation 2001. - 12-station turret (VDI 40) with driven tool stations, 3,000 rpm, 5.5 kW - Internal extraction system by Hengst Filtration (year of manufacture 2023) - Touchsetter, tool measurement - C-axis (main spindle) - Tool breakage and wear monitoring - 3-jaw chuck, Kitagawa B210, Ø250 - Tailstock - Coolant supply, also through the tool - IGF dialog programming Todpozr Hyfofx Afxsb - Chip conveyor

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details turning diameter 210 mm turning length 700 mm control Okuma OSP-E 100 L total power requirement 35,7 kVA weight of the machine ca. 7,1 t dimensions of the machine ca. 2660 x 2000 x 2330* mm Additional information CNC turning and milling center with C-axis and Y-axis, 2 turrets, and subspindle. The machine is being sold partially overhauled. CNC control: Okuma OSP-E 100 L Maximum turning diameter: 210 mm Swing over bed: 400 mm Distance between spindle noses: 960 mm Main spindle: Spindle bore: 53 mm Speed range: 50 to 6000 rpm Motor power: 11/7.5 kW Subspindle: Spindle nose: JIS A2-6 Speed range: 38 to 5000 rpm Motor power: 11/7.5 kW Z-axis: Travel: 700 / 700 mm (ZA + ZB) Rapid traverse: 40000 mm/min W-axis: Travel: 940 mm Rapid traverse: 40000 mm/min X-axis: Travel: 167 / 192 mm (XA + XB) Rapid traverse: 30000 mm/min Y-axis: Travel: 92 mm (+50/-42 mm) Rapid traverse: 15000 mm/min C-axis: Indexing: 360 x 0.001 deg. Rapid traverse: 400 rpm Disc turret: Tedjzru Ukepfx Afxjb 2 x 12 stations Tool holder mount: VDI 30 mm Power of driven tools: 4 kW Total connected load: 35.7 kVA Machine weight: 7100 kg Machine dimensions: 2660 x 2000 x 2330 mm* Plus swarf conveyor and bar loader Accessories FMB Turbo 5-42/6200/A bar loader, year of manufacture 2005 Chip conveyor Coolant system Collet chuck for main and subspindle Both turrets equipped with tool holders Machine documentation.

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 1,000 mm, controller manufacturer: OKUMA, controller model: OSP E-100M, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 320, number of axes: 4, This 4-axis Okuma MA-600HB horizontal machining center was manufactured in 2005. Ideal for complex machining tasks, it offers robust construction and precision. The machine have room for 320 tools in ATC, preparation for Fastems and Concept2000 conveyor. Consider the opportunity to buy this Okuma MA-600HB horizontal machining center. Contact us for more information. Additional equipment • Balluf read/write • Renishaw MP10 • 30 Bar coolant • Mayfran Consept 2000 Machine Benefits Technical Machine Benefits Tedpfx Afjzr Ny Ujxsb • Nc table (0. 001-degree accuracy) • Atc with 320 places (80 places for 600 mm tools) • Tool breakage control • Mop tool control Extra Information Machine still under power Technical Specification Taper Size BT 50 Through-spindle Coolant Yes

Condition: used, Year of construction: 2001, turning diameter: 210 mm, spindle bore: 53 mm, travel distance X-axis: 195 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 700 mm, rotational speed (max.): 6,000 rpm, overall weight: 6,500 kg, distance table center to spindle nose: 960 mm, OKUMA OSP-U100L control unit, with TOP AUTOMAZIONI XF370 bar feed system. Workholding and tooling are not included. Tedpozw Nu Nefx Afxjb MUST BE PICKED UP BY SEPTEMBER 2026.

Condition: excellent (used), Year of construction: 2013, operating hours: 5,785 h, Okuma Genos L300e-MY turning center Year: 2013 Technical details: Control OSP P300L-R Turning diameter 340 mm Turning length 1020 mm Spindle bore diameter 65 mm Spindle Speed 25 - 3000 1/min Spindle motor 15/11 kW Movement X-axis 235 mm Movement Y-axis +50 / -50 mm Movement Z-axis 1074 mm Minimum indexing C-Axis main Spindle 0,001 ° Number of tools on turret 12 Spindle speed driven tools 45 - 4500 1/min Number of driven tools 12 position Tedpfjzat Tvox Afxsb Tool Taper VDI40 Spindle motor driven tools 7/3,3 kW Bar feeder SPACESAVER 2210 ( 1500 mm bar lenght, up to 67 mm diameter ) Machine dimensions 4370x2540x2490 mm Weight 7500 kg Accessories/options: - SPACESAVER 2210 barfeeder - swarf conveyor - parts cather - Renishaw tool measuring arm - Driven tool holders - Static tool holders - Hydraulic chuck - Jaws for chuck - Documentations - Dust extractor

Condition: used, Year of construction: 2004, functionality: fully functional, Max turning diam 720mm, max lenght 2,000mm, 12-2,800Rpm, Spindle bore 110mm, XA 660mm, XB 230mm, ZA 2.215mm, Y 250mm, ZB 2,100, B-axis 0.001dg, BT 50 Big Plus, 40-5,000Rpm, Lower turret VDI V12, Tail Stock MT5. Helix and Hobbing function, OSP E100L, Portal loder, weight 28.000kg. Delivery September 2026. Tsdpfjzimqxox Afxjb

Condition: good (used), Year of construction: 2001, functionality: fully functional, turning length: 1,250 mm, turning diameter: 620 mm, spindle bore: 120 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,275 mm, spindle motor power: 22 W, total height: 1,925 mm, total length: 3,980 mm, total width: 1,880 mm, overall weight: 7,600 kg, bar passage: 80 mm, spindle nose: JIS-A2-8, Equipment: documentation/manual, OKUMA SPACE TURN LB400-M – CNC TURNING CENTER OKUMA SPACE TURN LB400-M – a robust and powerful Japanese CNC turning and milling center designed for precision machining and series production of metal components. The machine is built on the proven OKUMA platform and offers high rigidity, reliability, and excellent performance for demanding CNC turning applications. The LB400-M version is equipped with driven tools and a C-axis, making it suitable for complex machining operations and allowing multiple machining processes to be completed on a single machine. MACHINE DATA Manufacturer: OKUMA Model: SPACE TURN LB400-M Type: CNC Turning & Milling Center Machine type: CNC Lathe / CNC Turning Center CNC Control: OKUMA OSP Number of axes: 2 + C-axis Turret: 12-position turret Driven tools: Yes C-axis: Yes Hydraulic chuck: Yes Coolant system: Yes Chip conveyor: [YES / NO] Tailstock: [YES / NO] Condition: Used / Good working condition MAIN FEATURES Robust Japanese OKUMA construction Tedpfx Ajzwdw Esfxeb CNC turning and milling capability C-axis for complex machining operations Driven tooling 12-position automatic turret Hydraulic chuck High rigidity and stability Suitable for both single-part and series production Excellent machine platform for heavy-duty turning applications Machine available for inspection and testing The machine has a 3-year-old refurbished main spindle and X-axis.

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 565 mm, spindle motor power: 22,000 W, total height: 2,300 mm, total width: 2,100 mm, overall weight: 6,000 kg, product length (max.): 3,900 mm, number of axes: 3, This 3-axis Okuma LB3000 EX was manufactured in 2008. It features a maximum turning diameter of 340 mm and a distance between centers of 1020 mm. The machine is equipped with a powerful OSP-P200 control system and offers a spindle speed range of 45–5000 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LB3000 EX horizontal turning machine we have for sale. Contact us for further details. • Control system OSP-P200 • 12-station tool turret radial • Revolver 12 driven tools • Number of revolvers 1 • Tool holder BMT 60 • Number of tools 12 • Number of tools available approx. 200 • Driven tool stations power 7.1 kW • Driven tool torque 40.4 Nm • Driven tool speed range 45–6000 rpm • C-axis included • Sub-spindle with W-axis • Main spindle bore 110 mm • Spindle bore 80 mm • Spindle nose A2-11 • Spindle speed range 28–2800 rpm • Spindle speed 45–5000 rpm • Main spindle drive 22/15 kW • Power at 40% duty cycle 22 kW • Maximum turning diameter 340 mm • Distance between centers 1020 mm • Programmable chuck pressure (2 levels) • Thread milling interpolation X/Y and Z/Y axes • Workpiece catcher programmable • Chip conveyor with integrated coolant tank • Paper band filter system heavy-duty • Coolant tank capacity 480 l • Coolant pump 40 l/min at approx. 20 bar • Coolant pump type Brinkmann TH 90/690-FSI • Extraction connection diameter 200 mm • Hollow clamping cylinder bore 110 mm • Power chuck FORKARD QLC-KS 250-101 Z8 • Chuck bore 101 mm • Drawtube for spindle max. 100 mm • Collet chuck Hainbuch Axfix 100 Tsdpfsy Aaxrjx Afxjb • Clamping range 42–100 mm • Manual collet change device • Sub-spindle stroke 150 mm • Bar feeder interface • Short bar loader IRCO ILS RBK • Bar capacity diameter 5–100 mm • Spindle reduction tube diameter 90 mm length 1500 mm • Chip disposal conveyor PVC with PU coating • Hydraulic clamping cylinder bore 52 mm • Machine dimensions 3.9 m x 2.1 m x 2.3 m • Machine weight 4000–6000 kg • Maintenance contract yes • Utilization highOPTIONAL for an additional charge: Approx. 200 tools availableElectrical maintenance was carried out 1.5 years ago. During this work, some electrical components were replaced or cleaned Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2015, operating hours: 500 h, travel distance X-axis: 2,050 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 750 mm, table load: 2,500 kg, overall weight: 20,500 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 36, number of axes: 3, This 3-axis Okuma Millac 852 VII was manufactured in 2015. It features a robust table size of 2,200 × 850 mm and a maximum table load of 2,500 kg. The machine is equipped with a high-torque spindle motor of 18.5 kW and a rapid traverse of 20,000 mm/min. If you are looking to get high-quality machining capabilities, consider the Okuma Millac 852 VII vertical machining centre we have for sale. Contact us for further details. • Condition: Excellent; approximately 500 cutting hours; near-new condition • Heavy-duty machining center for high material removal rates • Extremely rigid machine structure Tsdpfx Aezqcr Iefxjb • Box guideways on all axes; quadruple box guideway system on Y-axis • Automatic oil lubrication for guideways with machine stop monitoring • Okuma OSP300 control with IGF conversational programming • Parameterized automatic tool collision prevention system • Automatic cutting force, tool load, and spindle torque monitoring • Tool life management and tool usage monitoring • Communication interfaces: USB, PCMCIA, RS-232 • Cutting force: 580 Nm • Chip removal capacity: 540 cm³/min • Spindle speed: 6,000 rpm • Spindle oil cooler • Table size: 2,200 × 850 mm • Rapid traverse: 20,000 mm/min • Tool change time: 0.5 s; chip-to-chip time: 5 s • Machine currently under production; can be inspected under power by an official Okuma technician • Includes documentation: spare parts list, electrical diagrams, programming manual, operation manual • Delivery: Immediate, subject to prior sale Additional equipment • Renishaw tool measuring system • Independent Knoll high-pressure coolant system (70 bar) • 30-micron coolant filtration system • LTA mist extraction system • Rear hinge-type chip conveyor • Large set of BT50 tool holders • Transformer Technical Specification Taper Size BT 50

Condition: used, OKUMA MAC TURN 350-W is a CNC Lathe-Milling Center, engineered for precision, high accuracy and reliability. Capacities: turning Ø 530 mm (over cross-slide), 550 mm (over bed); spindle hole 62 mm; turning length 1625 mm; Z 1670 mm, X 505 mm, Y ±95 mm (190 mm). Specs: 9 axes; C axis 360° res. 0.001°; B axis swivel 210° res. 1°; spindle speeds up to 5000 t/min (main and back spindle); milling cutter speeds 6000 t/min; spindle motor 22/15 kW. Equipment: 44-station tool changer, chip conveyor. Delivers tight tolerances; ideal for automotive, aerospace, medical and precision manufacturing. Tsdpfxjzqbkpe Afxjb

Condition: ready for operation (used), Year of construction: 2011, spindle speed (max.): 4,200 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 115 mm, travel distance Z-axis: 1,065 mm, spindle motor power: 30,000 W, total height: 1,970 mm, total width: 1,900 mm, overall weight: 6,000 kg, product length (max.): 3,310 mm, number of axes: 5, This 5-axis Okuma LB 3000 EX MYW 800 was manufactured in 2011. It features a maximum turning diameter of 410 mm and a distance between centers of 1,020 mm. The machine includes a robust tool turret with 12 positions and a maximum spindle speed of 4,200 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 EX MYW 800 horizontal turning machine we have for sale. Contact us for further details. • Working capacity: • Distance between centers: 1,020 mm • Maximum swing over covers: 580 mm • Swing diameter between centers: 470 mm • Maximum turning diameter (standard tools): 410 mm • Maximum turning diameter (driven tools): 340 mm • Main spindle: • Type: Big Bore ASA 8 • Air blow system for the self-centering chuck • Spindle opening and closing possible during rotation • Axis travel: • W: 825 mm • Rapid traverse: • X: 25 m/min • W: 25 m/min • Z: 30 m/min • Y: 12.5 m/min • Sub-spindle: • Connection: Flat 140 • Maximum speed: 6,000 rpm • Tool turret: • Type: OKUMA • Tool positions: 12 • Driven-tool power: 7.1 kW / 4.1 kW • Maximum driven-tool speed: 6,000 rpm Tsdjzpwu Uspfx Afxsb Additional equipment • LNS Quick Load Servo III bar feeder • Bar interface preparation • Right-side chip conveyor • Finished-part catcher arm • MSCTN80 A8 collet chuck with various collets • Tool holder kit • Kitagawa BB210 self-centering chuck • Kitagawa B206 self-centering chuck Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: good (used), Year of construction: 2006, functionality: fully functional, turning length: 900 mm, turning diameter: 450 mm, Used Okuma Multus B300-W multi-function CNC lathe including newer Kuka robot 70 kg (1–2 years old), without handling set-up. Todpfx Aeyux S Hjfxjb

Condition: good (used), Year of construction: 2007, functionality: fully functional, turning length: 1,500 mm, turning diameter: 710 mm, Used Okuma Multus B400W Max. turning diameter Ø 710 mm Tedpfx Afeyrf T Sexeb Turning length 1500 mm Kuka robot 140 kg without handling attachment 2 spindles, 7 axes, loading conveyor - loading station - unloading station - 950 mm swing 12+15" chuck 70 bar high-pressure pump

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 6,000 rpm, number of spindles: 1, number of slots in tool magazine: 150, Used Okuma MA-600HB Horizontal Machining Center Year: 2008 Spindle cooling Max. 6000 rpm Z- 810 mm X- 1000 mm Y- 900 mm Tool magazine for 150 tools 1 spindle 4 axes 10-pallet system We have 2 units available. Price is per unit, ex location. Tsdpfoyrf I Aex Afxjb

Condition: good (used), Year of construction: 2008, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 6,000 rpm, Used Okuma MA-600 HB horizontal machining center, year 2008, including turncut function, spindle cooling, 6000 rpm. Travels: Z-810 mm, X-1000 mm, Y-900 mm. Tool magazine for 150 tools, 1 spindle, 4 axes, 6-pallet changer function. Todpfxjywicvs Afxob

Condition: good (used), Year of construction: 1998, functionality: fully functional, Controller OSP700L Swing dia 300 mm Turning dia 170 mm Between centers 340 mm X travel 150 mm Z travel 350 mm C axis 360/0,001 degree Spindle hole D42 mm Chuck dia 200 mm Tjdpfevmzc Uox Afxsb Turret 12-fold Tool holder type VDI30 Spindle speed 50 - 6000 rpm Spindle power 5,5/7,5 kW Power required 400V, 15 kVA Weight 3500 kg Dimensions LxWxH = 2300 x 1635 x 1850 mm Accessories - C axis and live tool turret - Hydraulic tailstock - Coolant unit - Chip conveyor - Hydraulic 3 jaws, D160 mm chuck - Machine light Good condition, still under power.

Year of construction: 1988, condition: ready for operation (used), Turning diameter over bed/slide: 520mm/340mm, turning length: 850mm, speed: 3500rpm, spindle bore: 70mm, chuck diameter: 315mm, bar capacity: 70mm. Machine weight: approx. 7500kg, control: OSP 500L. Documentation available. On-site inspection is possible. Todpfx Aswz N Tcofxsb

Year of construction: 2001, condition: ready for operation (used), A CNC lathe Okuma Soarer L270E is offered. Turning length: 500mm, turning diameter over bed: 530mm, max. spindle speed: 4200rpm, machine dimensions X/Y/Z: approx. 2800mm/1850mm/2000mm, weight: approx. 3700kg, control: OSP-U10L. Functional, spindle may need to be replaced. An on-site inspection is possible by appointment. Tedpfoxph Sqsx Afxob

Condition: ready for operation (used), A CNC slant bed lathe Okuma is available. Chuck diameter: 200mm, swing diameter: 400mm, turning diameter: 300mm, turning length: 470mm, tool stations: 8. Machine dimensions X/Y/Z: approx. 4000mm/2150mm/2150mm, weight: approx. 5500kg, control: OSP 3000 L. Documentation available. An on site inspection is possible. Tsdpfx Afsyttwzexjb

Condition: ready for operation (used), Three Okuma CNC horizontal lathes are available. 1) Okuma LB 15 M. 2) Okuma LB 15. 3) Okuma LB 15 W. The Okuma LB 15 W is defective. On-site inspection is possible. Individual sale possible. Todpfxewmdv Ne Afxsb

Condition: good (used), Year of construction: 2004, functionality: fully functional, overall weight: 13,500 kg, CNC turning and milling center with 9 CNC axes, Okuma MacTurn 350 W, Year of manufacture 2004, OSP-E 100L, Additional magazine, Magazine with 80 tool positions, Todpfjzt Ihmsx Afxsb Main spindle with C-axis, Counter spindle with C-axis, Y-axis slide at the top / milling spindle, HSK 63 tool holder, Stepless B-axis as milling spindle, Distance between centers 1500 mm, Spindle bore 80 mm, Max. turning diameter 550 mm, Turning diameter 350 mm, Turret at the bottom with 12 tool positions and driven tools, Interlite compact filter system 900 l, Extraction system, Spindle operating time approximately 18,300 hours, Chip conveyor, Tool changer gripper arm completely renewed, High-pressure coolant, Coordinate measuring machine (CMM) measuring arm, Tool changer overhauled, Main spindle Kitagawa B - 210, Counter spindle Kitagawa B - 208.

Condition: used, 4 Axis Year Of Manufacture: 1998 Todpfxoy Druno Afxob 8” Chuck 2 Turrets – Turret 1 – 12 Stations Turret 2 – 8 Stations Programable Tailstock 750mm Between Centres Live Tooling C Axis Touch setter Y axis Swarf Conveyor Okuma OSP 7000L Control