Used Oscillating Mortiser for sale (886)

Condition: good (used), functionality: fully functional, machine/vehicle number: 5981, working width: 1,300 mm, Working height: 870 mm Working width: 1300 mm Conveyor belt width: 1270 mm Conveyor speed: 6 - 30 m/min, continuously adjustable Iodpsyah Uzefx Ap Dstn Passage height: 3 mm - 80 mm 1 rubber-coated application roller, 238 mm diameter, rubber coating 5 By1 1 chrome-plated metering roller, 174 mm diameter Electrical equipment, operating voltage 400 V, 50 Hz 3 phases Total connected load: 1.9 kW Motors and switching devices in explosion-proof design Additional equipment: Individual drive for the metering roller, continuously adjustable, with oscillating metering roller squeegee Control side: left Machine length: 1000 mm Weight: 1000 kg

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, total width: 2,900 mm, total length: 3,300 mm, repeat accuracy: 0.2 mm, cutting height (max.): 50 mm, compressed air connection: 6 bar, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 3 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Iodjfnlkwjpfx Ap Dotn Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) The machine is CE certified.

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 520 h, load capacity: 230 kg, empty load weight: 6,160 kg, construction height: 2,370 mm, fuel type: diesel, total length: 6,680 mm, drive type: Diesel, construction width: 2,320 mm, working height: 14,020 mm, Articulated telescopic boom lift Technical condition: very good Front tire size: 840x295 Front tire condition: 80 - 100% Rear tire size: 840x295 Rear tire condition: 80 - 100% Iedpexcdn Usfx Ap Djtn Oscillating axle, Easy Link, foam-filled tires

Condition: new, Various inking and dampening rollers for KBA Rapida 142: - no. 374.0101.1 Westland Ink form roller / Farbauftragwalze, Ø 117mm, new (4 pieces) - no. 374.0102.1 Westland Ink form roller / Farbauftragwalze, Ø 123mm, new (2 pieces) - no. 374.0201.1 Westland Ink form roller / Farbauftragwalze, Ø 129mm, new (3 pieces) - no. 374.0202.1 Westland Ink form roller / Farbauftragwalze, Ø 135mm, new (1 piece) - no. 374.0301.2 Westland Ink vibrator roller / Farbheberwalze, Ø 117mm, new (3 pieces) - no. 374.0401.1 Westland Ink distributor roller / Farbreiberwalze, Ø 117mm, new (3 pieces) - no. 374.0402.1 Westland Ink distributor roller / Farbreiberwalze, Ø 123mm, new (4 pieces) - no. 374.0501.1 Westland Ink distributor roller / Farbreiberwalze, Ø 129mm, new (3 pieces) - no. 374.1005.1 Westland Waterform roller / Feuchtauftragwalze, Ø 135mm, new (5 pieces) - no. 374.1199.1 Westland Metering roller / Feuchtdosierwalze, Ø 130mm, new (3 pieces) - no. 90001067 Ebonit Ink distributor roller / Reiberwalze, Ø 80mm, used (2 pieces) - no. 90008616 Ebonit Ink distributor roller / Reiberwalze, Ø 102.3mm, used (1 piece) - Rilsan Oscillating roller / Beschwerwalze, Ø 60mm, used (1 piece) Itodpfx Ajv Ebf Hep Dsn

Condition: used, Used Machine Features and Technical Specifications: - Lock case milling unit - Handle hole driller Itsdpezlbn Dsfx Ap Den - Face milling cutter - Motor: 1.7 kW - 2,800 rpm - Includes accessories Location: 65439 Flörsheim Availability: Available immediately

Condition: good (used), functionality: fully functional, Year of construction: 2015, operating hours: 2,222 h, machine/vehicle number: 6596, load capacity: 230 kg, lifting height: 22,000 mm, platform length: 2,600 mm, platform width: 760 mm, overall weight: 12,492 kg, transport length: 10,300 mm, transport width: 2,480 mm, construction height: 2,600 mm, fuel type: diesel, tire size: 39x15-22.5, tire condition: 70 %, drive condition: 60 %, wheelbase: 2,450 mm, color: yellow, Equipment: all wheel drive, JLG 660 SJ telescopic boom lift, all-wheel drive, 22 m Isdpezxh D Eofx Ap Dotn Working height: 22 m Platform height: 20 m Lateral reach: 17.4 m Telescopic steel construction Drive: 4-cylinder Deutz diesel engine 2 driving speeds Tire size: 39x15-22.5 Tread depth: 20-22 mm Wheelbase: 2450 mm Wheel arrangement: 4x4 Oscillating axle Overall dimensions: 10300 x 2480 x 2600 mm Weight: 12492 kg Load capacity: 230 kg Rotating platform Hydraulic platform arm: 1830 mm Platform: steel construction Platform dimensions (L x W x H): 2400 x 760 x 1100 mm Platform and ground controls We will gladly send you more detailed information and additional images upon request. This description does not constitute a binding offer and may contain errors. No guarantee is given for the accuracy of all information.

Condition: new, Year of construction: 2026, Hello, I have a new 800mm diameter vibrating screen for sale. The screen has two levels for classifying material. Mesh size is negotiable. Changing the screen size using screws is quick and easy. The motor mounted in the screen has a 0.7kW output and 1460rpm, and it vibrates and oscillates around the circumference. The screen is made of SUS304 stainless steel. The entire screen structure and welds are solidly constructed. The last photo shows the operation of the vibrating motor, showing how the material spreads across the screen. The screen can screen both dry and wet material. It is possible to add a third filter layer. I provide access to all consumables after purchasing the screen, such as seals and clamps. I also have empty frames on which additional screens can be stretched. Iedpfx Aezw Eqajp Dotn

Condition: good (used), Year of construction: 2019, functionality: fully functional, Table surface: 7,500 x 2,500 mm Positioning speed: 40,000 mm/min Positioning accuracy: = 0.06 mm/min Repeatability: 0.05 mm/min Machine weight approx.: 2,300 kg MicroStep CNC cutting system of the MG series with the following features: - Hypertherm® XPR170™ plasma power source with automatic OptiMix™ console - Plasma rotator for weld preparation - Fully automatic oxy-fuel torch - Fully automatic drilling spindle MG-40-P26 with 26.8 kW - Steel portal driven and stiffened on both sides for a clear and precise cut - AC servo motors from Panasonic for high drive power and excellent dynamics - Durable and low-maintenance planetary gearboxes - User-friendly machine control - High reliability and long service life, even in three-shift operation - MicroStep iMSNC® machine control with MMI console and 24" touchscreen - iMSNC® module | User management - iMSNC® module | Expert system - iMSNC® module | Automatic calibration of mechanical sensing - iMSNC® module | Visualization of wear parts - iMSNC® module | Assistant for loading CNC programs - iMSNC® module | Management of cutting programs (MRP) - iMSNC® module | EcoInfo - iMSNC® module | MachineInfo - iMSNC® module | Assistant for service and maintenance operations - USB 3.0 connection for storage media - Remote maintenance module MicroStep RemoteDiagnostics® - Remote maintenance access via TeamViewer - Two LCD control units on the portal - Laser pointer with automatic offset transfer - Hypertherm® XPR170™ plasma power source - Industry-leading cut quality - X-Definition - Advanced HyDefinition technology - Automatic gas console | OptiMix™ - CNC interface for the Hypertherm® XPR170™ Connection to the CNC control - Module for automatic power control of the Hypertherm® XPR170™ - Electrical and mechanical torch sensing - Remote activation of plasma power source - Double-sided cable protection (collision protection) of the portal bridge via emergency stop - Extraction table system with oscillating conveyor OXYtrac 2580 HD Main components and dimensions: 1 Table consisting of: Itjdpfx Apezwl Dme Dsn 4 table elements WxLxH (mm) 2,600 x 2,080 x 950 Total support area: WxLxH (mm) 2,600 x 8,320 x 950 Contiguously usable working area per table: Vertical cutting: WxL (mm) 2,500 x 8,000 Bevel cutting: WxL (mm) 2,000 x 8,000 Table width (outer): W (mm) 2,830 2 Oscillating troughs L (mm) approx. 8,900 Cutting processes and associated extraction capacity: 1x Plasma max. 170 Amp., bevel cutting 1x Oxy-fuel max. 100 mm workpiece thickness regularly 200 mm workpiece thickness occasionally

Condition: excellent (used), Grinding width: 700 mm Maximum material height: 150 mm Itedozvx Nyjpfx Ap Dsn 9 kW motor Oscillation on both shafts

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, total length: 4,200 mm, total width: 1,300 mm, total height: 2,200 mm, overall weight: 2,000 kg, input voltage: 380 V, grinding belt width: 80 mm, input frequency: 50 Hz, Direction of machining: from left to right. Two belt sanding units with a traversing sanding pad (option to use profiled pads). Sanding units mounted on a cross column, with adjustable height, left/right positioning, and angle adjustment. Electronic system for adjusting the advance and retraction of the sanding pad, synchronized with the feed rate (changing the feed rate automatically adjusts the advance/retraction times of the pads). Adjustment of the pad pressure. Adjustment of the sanding belt tension. Itedpfxezz Rh Se Ap Dsn Oscillation of the sanding belt. Two sanding belt speeds. Max. sanding belt width: 80 mm. Feed rate is continuously adjustable using a variator. Pressure bar with pressure rollers (new pressure rollers). Additional lateral pressure.

Condition: refurbished (used), Morticer brand Comec model FFM/LX, serial no. 890704, with cabin, loader and automatic arm discharger, for mortising and drilling panels for drawers, furniture components and similar. Itsdozz Rtbepfx Ap Djn

Condition: used, Year of construction: 1994, machine/vehicle number: 9400207, functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 380 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 13,000 mm, workpiece width (max.): 280 mm, workpiece height (max.): 160 mm, actuation type: electric, total length: 21,000 mm, Equipment: CE marking, documentation/manual, The AUER Unicapp CNC woodworking line is fully functional for standard woodworking tasks; it can process KVH and BSH timber in full lengths (13m). A roof truss or other wooden structure drawn in a CAD program for carpenters, such as SEMA, can be directly sent to the CNC machine. Demonstration and testing are possible. The maximum working height and width of the processed timber are 26/24 cm. The machine has a crosscut saw, mortiser, drill, dovetail milling cutter, rabbeting and tenoning milling cutter, and an automatic feeder. More information is available by phone. The machine software is still supported. The total length of the machine is 21m and it requires a main circuit breaker of 3x50A. Technical data: AUER UNIKAPP – woodworking processing line (Abbundanlage / Zimmerei-Bearbeitungszentrum) Manufacturer: Ervin Auer Maschinenbau, Abtenau (Austria) Successor company: AUERTECH GmbH & Co KG (Lindenthal 63, 5441 Abtenau, Austria) Type: UNIKAPP Category: Woodworking processing center (woodworking line) Power: 30 kW Voltage: 380 V Serial number: 9400207 Year of manufacture: 1994 Max. workpiece width: 280 mm Max. workpiece thickness: 160 mm Itodpfozz Tv Eox Ap Djn Total number of units: 5 Saw units: 1 Drilling units: 1 Milling units: 2 Mortising units: 1 Workpiece feeding: using clamping jaws (sliding carriage with pneumatic/hydraulic clamping) Compliance with standards: CE marking Total electrical power consumption: 30 kW This is a woodworking line for processing beams/roof trusses – it combines a saw for crosscuts and miters, milling cutters for fitting, mortising joints, a drill, and a mortising unit. The workpiece is moved using clamping jaws along the entire length of the beam with pneumatic clamping. If you have any questions or need further information, please feel free to send us a message or contact us by phone. A roof truss or other wooden structure drawn in a CAD program for carpenters, such as SEMA, can be directly sent to the CNC machine. The machine has guaranteed service support, and an upgrade of the ABB control program corresponds to the latest version. Demonstration and testing are possible. It provides a similar performance to a Hundegger K1. If you have any questions or need further information, please feel free to send us a message or contact us by phone.

Condition: refurbished (used), Bezner screening machine | roller screen type BSM 50-1x2/4,75 reconditioned | refurbished with new bearings (roller bearings), new vibrating elements and a refurbished screen box Make: Bezner Type: BSM 50-1x2/4.75 Screening capacity: up to approx. 60–70 srm/h (for wood chips and sawdust) Screening area: 4.75 m² per screen mesh size Screen decks: 2 Fractions: 3 Screen mesh size: - 1st screen deck: punched perforated sheet metal screen, D = 40 mm - 2nd screen deck: punched perforated sheet metal screen, D = 10 mm or as agreed Drive power: 4.0 kW, 3 x 400 V, 50 Hz Screen box height: 700 mm L x W x H: 5,600 x 2,300 x 2,050 mm Machine weight: approx. 4,800 kg Machine colour: RAL 6011 Reseda green Screen inserts freely selectable Outlet design according to customer requirements Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - wood pellets - charcoal - Waste wood - bark Iodpfx Apsz Drr Ij Dotn Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Oscillation screen | Wood chip screener | Screening machine for wood chips

Condition: used, Year of construction: 1979, functionality: fully functional, working width: 1,100 mm, working height: 160 mm, type of input current: three-phase, input voltage: 380 V, OTT RS-O 110 Wide-Belt Calibrating and Sanding Machine Used industrial wide-belt sanding machine manufactured by OTT. The machine is equipped with two sanding units and is suitable for calibrating, pre-sanding, and fine sanding solid wood, furniture components, and panel materials. Technical specifications: Manufacturer: OTT Model: RS-O 110 Year of manufacture: 1979 Machine number: 354 Maximum working width: 1,100 mm Maximum workpiece height: 160 mm Number of sanding units: 2 Itodpfez Dxkdex Ap Don Total installed power: 30 kW Power supply: 380 V Feed speeds: 2 Operating pressure: 8–10 bar Dust extraction connections: 2 × Ø 200 mm Approximate dimensions: 2,230 × 2,020 × 2,050 mm Approximate weight: 3,000 kg Machine configuration: Grooved rubber calibration roller Pneumatic sanding pad with metal rollers Pneumatic sanding-belt oscillation with photocell control Electrically adjustable working table Integrated cleaning brush Industrial heavy-duty construction The machine is offered in used condition. Its actual condition, equipment, control panel, and internal components are shown in the photographs. Inspection is possible by prior appointment. Location: Gātciems, Latvia Loading assistance can be provided. European transport can be arranged upon request. Price: EUR 2000 net, excluding VAT.

Condition: excellent (used), Catalog number: 7840 TECHNICAL DATA - Max. width of workpiece: 630mm - Max. height of workpiece: 110mm - 2 units: 1) Grooved rubber roller for calibrating 2) Grooved rubber roller for calibrating + shoe + metal roller - From above: - Metal sliding feed roller - Unit - Metal sliding roller - Unit - Sliding, metal roller - From below: - 2 metal, sliding rollers - Traction belt - 2 metal, sliding rollers - Pneumatic belt oscillation - 2 types of feed speed - Motor: 2 × 7.5kW - Electric table lifting Isdpfjzr I Anjx Ap Dotn - Working pressure: 6-8 bar - Diameter of dust extraction nozzle: 2 x 160mm - Overall dimensions (L/W/H): 1650x1060x1970mm - Weight: 972kg ADVANTAGES - Polish production - 2 units - Unpainted - Very good condition - Used grinder Net price: 20900 PLN Net price: 4860 EUR, depending on the exchange rate of 4.3 EUR (Prices may vary due to higher fluctuations)

Condition: excellent (used), Catalog number 7382 TECHNICAL DATA Mortising carriage: - Electric feed with stepless speed control - Carriage adjustable in angle - Feed motor 0.46kW - Table size (length/width) 700x450mm, extendable to 1150mm - Cross slide on the carriage – cutting length on the extendable telescope 1860mm - Rotating block in the cross slide - 2 pneumatic clamps Length-cutting saw: - Max blade diameter 380mm - Max cutting height 110mm - Blade adjustable up/down, front/back and in angle - Blade guard - Saw motor 2.2kW Mortising spindle: - Pneumatic spindle stroke - Spindle adjustment up/down and stroke adjustment using knobs - Max tool diameter 320mm - Spindle diameter 40mm - Spindle working height 220mm - Spindle lock - Motor 7.5kW Profiling spindle: - Pneumatic spindle stroke - Spindle adjustment up/down and stroke adjustment using knobs - Max tool diameter 200mm - Spindle working height 220mm - Spindle diameter 54mm - Spindle lock - Sliding support from the table - Motor 7.5kW Saw for cutting window bead: - Max blade diameter 200mm Iedpezr Nb Sjfx Ap Dstn - Blade bore diameter 30mm - Blade adjustable front/back, up/down - Blade guard - Motor 2.2kW Feed: - Number of rollers 8 pcs - Motor approximately 0.55kW - Roller size 110x50mm - 8 feed speeds: 4, 6, 8, 10, 12, 15, 20, 30 m/min - Suction nozzle diameter 60mm, 2x130mm, 110mm, 100mm - Working pressure 6-8 bar - Dimensions (length/width/height) 3600x2100x1600mm, weight approximately 2500kg ADVANTAGES – For window production – Pneumatic spindle stroke – Carriage with electric feed – Length-cutting saw – Mortising spindle – Unpainted, used machine, very good condition Net price: 27900 PLN Net price: 6488 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: used, Manufacturer: WEINIG Type: UC6 Year of manufacture: 1997 Condition: untested Machine description/technical data WEINIG UNICONTROL6 window manufacturing system including Oertli tool set IV68 and IV77 wood + wood/aluminum (all cutting drawings available upon request) Screen control for 99 window types. 1 type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Manufacturing possibilities: Individual parts, double parts, frame-wise, series production, edge profiling Control of tool positions (longitudinal and transverse machining) via selector switch on the control panel Transverse machining: - electronic length stop for wood lengths up to 2,600 mm, with auxiliary stop for wood lengths up to 3,600 mm, with slot table that moves along and has separate control Itjdpfjzx Smqex Ap Djn -Studio window setup: Swiveling length stop ± 60° with electronic digital display and pneumatic clamping Sliding counter rail Special pressure pad for the production of angled parts Cut-off saw 3 kW Axial adjustment manually with mechanical digital display Laser guide for cut-off saw to detect the section Cut-off saw pneumatically controlled, mortise dimension adjustable via mechanical numerical display Mortise and slot spindle 11 kW (standard 7.5 kW) Tool clamping length: 320 mm Number of tools: 4 x 80 mm Axial adjustment: 240 mm Electronic spindle brake Longitudinal machining: 7 feed rollers in the infeed and 5 in the outfeed, high/low controlled for faster and shorter edge profiling process Synchronous spindle (vertical right) 7.5 kW Before the profiling spindle for splinter-free edge profiling Profiling spindle 11 kW (standard 7.5 kW) Number of tool positions: 4 x 80 mm, pneumatically controlled Axial adjustment: pneumatic Mechanical spindle brake Profile milling unit (horizontal above) 3 kW After the profiling spindle, radially controlled to 2 positions and axially controlled to 3 positions Mechanical spindle brake Profile milling unit (vertical right) at the end of the machine 3 kW Radially controlled to 2 positions and axially controlled to 3 positions Plunge automation: The plunging in/out at the beginning/end of the wood is controlled via 2 adjustable limit switches. Plunge tolerance ± 3 mm. Mechanical spindle brake Return conveyor to the operator including identification function for further processing Partial renewal of pneumatic hoses and extraction hoses in the machine required! Price in €: on request VAT: exclusive Availability & Location Location: Greater Freiburg area Available: promptly after dismantling Inspection: in operating condition / in operation Price in €: on request

Condition: used, Year of construction: 2017, operating hours: 1,113 h, machine/vehicle number: G30XL320839, The machine would be serviced by Zünd Spain! TECHNICAL DETAILS Zünd G3 XL-3200 Plotter Vacuum system: 1–9 kW Tool heads Universal tool head UM-ZS G3, working width: 60 mm Universal tool head UM-ZP G3, working width: 60 mm Operating hours: 1,113 h EQUIPMENT Zünd G3 XL-3200 Plotter, item no. 6343200 G3 Vacuum system, CIC, item no. 6438104 Iodpezyktljfx Ap Dstn ICC camera for S3/G3, item no. 6539101 UM-ZS G3 Universal tool head, item no. 6531006 UM-ZP G3 Universal tool head, item no. 6531007 Universal cutting tool (UCT), item no. 6532001 EOT-250 Oscillating tool, G3, item no. 6532018 V-CUT tool, G3, item no. 6532021 Creasing tool type 1 (CTT1), item no. 6532051 Creasing tool type 3 (CTT3), item no. 6532053 Zünd Cut Center software package, item no. 6731200 Zünd Cut Center camera option, item no. 6731250 Zünd Cut Center V-Cut option, item no. 6731240 PC and monitor for Zünd Shipping costs for the plotter

Condition: excellent (used), Year of construction: 1989, Jung JF 520 Jung JF 520 surface grinding machine, manufactured in 1989 / 2019, mechanically overhauled, very good original condition. The machine comes from the technical department of a renowned German die-casting company. Technical data: Year of manufacture 1989 / 2019 Iedez Agz Rspfx Ap Djtn Technical data Clamping area (L x W in mm) 600 x 200 Oversize grinding area (L x W in mm) 600 x 250 Magnet size max. mm 500 x 200 Grinding wheel dimensions max. mm 225 (250) x 25 x 51 Distance table/spindle center mm Max. 400 Table longitudinal feed, oscillating m/min 1 – 20 Creep feed mm/min 0 – 500 Grinding spindle drive, speed rpm 800 – 4200 Power kW (with creep feed) 1.6 – 2.2 Machine weight approx.: 2.0 t Accessories and equipment: Magnet Coolant system Machine feet Grinding wheel About the machine: We offer a Jung JF 520 surface grinding machine, manufactured in 1989 / 2019, in very good condition. The machine is, of course, fully functional and has approximately 250 operating hours since its overhaul. All slides run very smoothly and evenly. Even at high speeds, the Jung runs very quietly. This newer generation of surface grinding machines is very user-friendly, and surfaces with a low Ra value can be produced. Take advantage of the opportunity to inspect this machine on site under power and see for yourself the condition of the machine. Video: Jung JF 520 You can find more surface grinding machines from well-known manufacturers on our website.

Condition: used, mileage: 107,012 km, power: 316 kW (429.64 HP), first registration: 12/2021, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: blue, gearing type: automatic, emission class: euro6, total length: 10,830 mm, total width: 2,550 mm, total height: 3,750 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Cab and Comfort* Cab NN (narrow, medium length, normal height), Comfort suspension Itjdpfx Aezyxt Top Dsn * Sun visor * Driver's comfort seat, air-suspended, with seat heating, lumbar support, shoulder adjustment, armrests * Co-driver's seat, longitudinally and backrest adjustable * Climatronic air conditioning system * Auxiliary water heater, continuous ventilation with overpressure * Numerous storage compartments, storage boxes, cup holders ----Infotainment and Connectivity* MAN Media System Advanced Navigation (7 inches) * Sound system * Smartphone integration * Online traffic information * Option for integration of MAN apps * Digital tachograph with remote communication and remote download * USB ports ----Safety and Assistance Systems* Electronic Stability Program (ESP) * Electronic Braking System (EBS), ABS * High-performance engine brake * Traction control system (ASR) * Cruise control * Emergency braking assistant (EBA) * Lane departure warning system (LDW) * Attention warning system (AttentionGuard) * Retrofit of turning assistant ROSHO TurnCam ----Lights & Visibility* LED daytime running lights * H7 headlights * LED tail lights * H7 fog lights * Work lights * Reversing warning system * Electrically adjustable and heated exterior mirrors, curb mirror * Camera system with external monitor ----Engine and Drivetrain* Engine: MAN D2676 LF80, 316 kW (430 hp), 2,200 Nm, Euro 6d * High-performance engine brake MAN EVBec, adjustable * Transmission: MAN TipMatic 12.28 OD, various driving programs (Efficiency, Offroad), EfficientRoll, Idle Speed Driving * Auxiliary drives: Several gear-dependent auxiliary drives, for crane operation & body operation * 2nd front axle, 9,200 kg, non-driven, steered, not liftable * Leaf spring suspension front, air suspension rear, electronic air suspension control (VASC) * Disc brakes on all axles, parking brake electronic * RINGFEDER Type 4040/G150B trailer coupling ----PALFINGER PHT 20 ASLD5 roll-off tipper, year of manufacture 2021* hydraulic underrun protection * ALU storage boxes ----PALFINGER PK 37.002 TEC C LK, year of manufacture 2021* 4 outriggers * max. 12.3m & 2500 kg load capacity * max. load capacity of 7400 kg with 4.0 m outrigger extension * 2 hydraulic auxiliary outriggers * Palcom (radio remote control) * Remote control with charging station * HPSC (High Performance Stability Control) * Connected (Telematics solution) * AOS (Active Oscillation Suppression) * P-Fold (Assistance System) * Central lubrication system ----* Tire dimension front axle: 385/65R22.5 * Tire dimension rear axle: 315/80R22.5 * Fuel tank: 400 ltr. * AdBlue tank: 35 ltr. * Technical gross weight: 37000 kg * Unladen weight: 17246 kg * Permissible trailer load: 22432 kg * Overall length: 10830 mm * Wheelbase: 4105 mm * TÜV/AU due: / ----Vehicle number: 12434----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed. We will be happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge: ----Trade-in of your old vehicle, TÜV/AU inspection, complete export handling, arranging financing, application for export registration, transport of vehicles, registration of vehicles, recovery and vehicle transport ----YOUR VTS TEAM

Condition: new, Year of construction: 2026, power: 18 kW (24.47 HP), _____Standard equipment: 3-cylinder Kubota D1105 diesel engine, 18.5 kW (25 hp), hydrostatic all-wheel drive with automatic control, 7.00-12 AS tires with ET+40, including reversible rims, SPT (Schäffer Power Transmission), original Schäffer axles, 5-hole combined oil cooler, drum brake as service and parking brake, maintenance-free articulated oscillating joint, retention system (driver protection canopy), LED work lights: 2 in front, 1 in the rear, parallel guidance, additional control unit mechanically operated, working hydraulics: standard / option: 33 / 42 l/min, adjustable steering column, operating hour meter, fuel and temperature gauges, seat contact switch, quick-change frame SWH with hydraulic locking. Itodpfx Aozzhcajp Djn Optional equipment: attachment frame type SWH, hydraulic locking DW, towing device with pin and lashing eyes, crocodile jaw 1.0 m HL attachment SWH, storage location: null.

Condition: used, Year of construction: 1991, - Manufacturer: Fladder - Model: Gyro 300 Vacuum - Working width: 1300 mm Isdpfezia Nnex Ap Detn - Year of manufacture: 1991, good condition - Flex Trim sanding heads - Quick-change sanding media - Sanding media grit: K240 - Sanding media length: 45 mm with support brushes - Abrasive slits: 20 and 5 mm - Number of brush heads: 6 - Rotating and oscillating sanding unit - Motor power: 5 kW - New frequency inverter for the conveyor belt - With vacuum conveyor belt - Feed rate: continuously adjustable from 2 to 8 m/min - Length: 2070 mm - Width: 2370 mm - Height: 2240 mm - Weight: 2300 kg - Location: In stock, D 32825 Blomberg - Volts, Hz: 400 / 50 - Can be tested in Blomberg

Condition: like new (used), Year of construction: 2021, operating hours: 30 h, functionality: fully functional, machine/vehicle number: AE00002612, grinding width: 1,350 mm, overall weight: 6,250 kg, grinding height: 170 mm, working height: 170 mm, table height: 900 mm, workpiece height (max.): 170 mm, The machine has only been in use for a few hours and is practically brand new. It is in perfect working order. See below for the full specifications: DMC system T5C 1350 PF170-4M Lifting unit for a fixed work table, 900 mm from the ground * Working thickness: 3 to 170 mm BL 16 Infeed panel with reading bar for 'epics' sectioned pads, pitch 16 mm, or with PWM3 POSITION 01 TIE-5000 Working unit for an extractable internal cross pad PE 16T 'EPICS' sectioned electronic sanding pad, pitch 16 mm Working pressure control of the sectioned pad via the Pro-Sand control system Motor driven by an inverter, power up to 15 kW POSITION 02 DO 19 Oscillating unit fitted with 19 rotating 125 mm disc brushes 1.1 kW main motor driven by an inverter Independent motor for controlling the oscillating movement Electronic auto-set for the unit Sliding movement with motor driven by an inverter POSITION 03 BF 300 Working unit for a brush roller, diameter 300 mm 4 kW main motor driven by an inverter Double rotating direction of the brushing roller Electronic auto-set for the brush roller Side oscillation of the brush roller POSITION 04 BF 300 Working unit for a brush roller, diameter 300 mm 4 kW main motor driven by an inverter Double rotating direction of the brushing roller Electronic auto-set for the brush roller Side oscillation of the brush roller POSITION 05 SC-2620 Operating unit for a superfinishing pad Sanding belt rotation against the conveyor feed direction Electronic sanding belt swing control Disc brake ◦ Chevron belt dimensions: 1370 x 2186 mm ◦ Sanding belt dimensions: 1370 x 2620 mm PE 16/C 'EPICS' sectioned electronic sanding pad, pitch 16 mm 16 mm center-to-center distance of sectors Double-action pneumatic cylinders with adjustable push/counter-push Graphite cloth with quick extraction device Total management of its functionality by the "Pro-Sand" electronic control Working pressure management of sectioned pad via the Pro-Sand control system Itedpozcmcvefx Ap Don Timed oscillating clearing blowers 15 kW motor driven by an inverter OUTSIDE THE MACHINE SB/U 200 Outfeed working unit for abrasive cloth-coated rollers, diameter 200 mm Roller rotation against the conveyor feed direction / Manual adjustment of the roller working position / Abrasive cloth-coated roller, diameter 200 mm, 'Ultra Fine' type with silicon carbide fibers / 2.2 kW motor / Side oscillation of the brush roller OTHER DEVICES Perforated worktop and conveyor belt with a vacuum motor powered by an inverter up to 7.5 kW, integrated into the machine frame Front supporting worktop equipped with five idler rollers Rear supporting worktop equipped with five idler rollers 4 kW feed belt motor driven by an inverter Console with integrated PC "eye-M" and "Maestro Pro-Sand" electronic control with Tele Service system 1999 working programs / Virtual keyboard for fast settings of the machine / Production report / Interactive trouble-shooting program and self-diagnosis of the electronic cards / Display of electric and pneumatic diagrams / Display of the user manual, spare parts catalog, electric and pneumatic diagrams Vision panel door positioned on the service side Internal LED lighting for the machine

Condition: used, functionality: fully functional, Year of construction: 2017, Equipment: quick-change device, Likufix SWA48: Fully hydraulic mounting plate for oscillating attachments, e.g., grapples. Iodpfxjz Df Tfe Ap Detn Hole diameter: 80 mm.

Condition: used, Year of construction: 1996, Technical data: - Manufacturer: Venjakob - Type: VBS 1300 - Working width: 1.300mm - Year of construction: 1996 - Operating side: left - Electric height adjustment of the sanding rollers - Constant table height, working height 920+-20mm - Manufacturer of brush sanding heads: Flex Trimm - Number of brush sanding heads: 2 pieces - Diameter of the sanding heads: 280/390mm - Sanding centre length 55mm - Roller1, grit 240, roller2, grit 280 - Speed of the brush sanding heads: 100-1000 rpm - Angled brushes Itedpfsyyyhuex Ap Don - With brush oscillation - With vacuum belt - Feed speed: 1.5 - 7.5m/min. - Motor power 4KW - Machinelength: 3.500mm - Very sturdily built machine - Colour: light grey RAL 7035 - Total connected load 16KW - weight: 2740 kg