Used Oscillating Mortiser for sale (795)

Condition: used, Camam double mortising machine, belt driven, with 2 horizontal and 3 vertical spindles, used Pjdpfxjlxurmo Agzjha

Condition: used, Mortising machine brand Comec mod. FFM/LX, serial no. 890704, with cabin, automatic loader and unloader, for mortising and drilling headboards, footboards of beds and similar Phjdpfx Aem Smg Ujgzoa

Condition: used, Horizontal double mortising machine for "Old America" type seats and similar, used. Phjdeq Rkt Dopfx Agzoa

Condition: used, Double drilling machine, with 8 spindles per side, for backrest columns of “Old America” model chairs Podsq Rkt Ispfx Agzjha

Condition: good (used), Year of construction: 2013, IFP Europe KP 50 HMA Basic Vacuum Parts Washer Mfd. 2013 S/N: 201305-00974 Specifications: Number of Baskets per Wash Cycle 1 Basket Size 11.9″ x 7.9″ x 17.7″ Machine Dimensions 70″ x 103″ x 70″ Chiller Size 5 ton Solvent Capacity 106 Gallon Wash Cycles Per Hour 4 to 8 Chamber “Max. Load Weight” 110 lbs Machine Weight 4,000 lbs Equipped With: Rotos & Vane Pumps, Liquid Ring Tank, Rust Inhibitor Tank Filter, Waste Oil Separator, Siemens Touch Screen Control, Budzar BWA-AC-05-FCB-12-0-000 5-HP Chiller, Safety Guarding, Light Curtains, Automatic Door, (3) Wash Settings, Rust/Vap/Mist/Vac/Oscillation Settings, 100-Lb. Batch Weight Repairs necessary: Pumps C301.00020 DVP LC106 Vane Pump — $5,500.00 C301.00078 Liquid Ring Pump — $3,561.55 C301.00081 RBS 45 Rotary Lobe Pump — $13,500.00 Pump Subtotal: $22,561.55 Phedpex Ddc Iofx Agzea Accessories / Pipes for Conversion A508.00031 — $287.50 A508.00012 — $287.50 A508.00013 — $345.00 Accessories Subtotal: $920.00 Grand Total $23,481.55

Condition: used, Year of construction: 2008, control 840 D Sinumerik weight of the machine ca. 25 t dimensions of the machine ca. 5100 x 3034 x 4500 mm Technical Details: Largest workpiece diameter Ø 1000 mm Internal workpiece diameter Ø 100-500 mm Largest workpiece length 500 mm Phodpfxswwar Ij Agzsa Largest oscillation diameter 1250 mm Workpiece spindle flange diameter 520 mm Through-hole of the workpiece spindle Ø 45 mm Workpiece spindle speeds NC - programmable 0-440 rpm Table strokes: Z1/Z2 axis 1000 mm, X1/X2 axis approx. 1300 mm Table speed infinitely variable: Z axis 0-30 m/min, X axis 0-50 m/min Infeed speed infinitely variable 0.01-15 mm/min Infeed stroke-dependent 0.0005-0.1 mm Workpiece spindle positioning C-axis Operating voltage 3~400 VAC/50 Hz SINUMERIK 840 D control Machine connected load approx. 75 kW

Condition: used, Year of construction: 2016, Used Makor START ONE spray coating machine suitable for low-volume woodworking production. Designed for applying water-based or solvent-based paints and glues to veneered components and PVC panels. Ideal for companies moving from manual finishing to automatic spray coating. Phjdpfx Agox Iggyjzoa Equipped with PLC control system with intuitive interface and automatic panel detection to optimise paint usage. Features a self-cleaning paper transport system, reducing maintenance and downtime. Spraying unit includes an electronically controlled oscillating arm with capacity for up to 4 spray guns, 2 high-pressure feed circuits, and quick-change coupling system. Efficient air-flow and filtration system ensures clean operation and environmental compliance. Technical Data: • Feed speed: 1–4.5 m/min • Air capacity: 10,000 m³/h • Installed power: 7 kW • Working height: approx. 900 mm

Condition: new, Year of construction: 2024, functionality: fully functional, input voltage: 24 V, operation weight: 160 kg, LARGE QUANTITY AVAILABLE! Power: Battery: 24V / 100Ah Avarage power consumption: 1000W Power suction turbine: 500W Power brush drive: 500 W Max running time: 5 hours Cleaning brushes: Brush speed: 175 rpm Brush diameter: 510mm Vacuuming: Vacuum power, air volume (max): 24 L/s Vacuuming power, negative pressure (max): 120 kPA (mbar) Dimensions and weights: Theoretical surface cleaning Performance: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working range incline: 2% Fresh/waste water tank volume: 50/50 L Max. water temperature 60°C Ambient temperature 5-40°C Pedpfx Asv Rvy Aogzeha Net weight 160 kg Dimensions of battery compartment: 350 x 350 mm Values determined as per EN60335-2-72: Total oscillation value: < 2.5 m/s² Uncertainty K: 0.2 m/s² Sound pressure level Lpa: 66 dB(A) Uncertainty Kpa: 2 dB(A) Sound power level Lwa +: 81 dB(A)

Condition: used, Year of construction: 2024, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife Psdjif Ek Rspfx Agzoha • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: used, Vibratory Bowl Feeder / Sorting Device / Bowl Feeder / Vibratory Feeder SORTIMAT Vibratory bowl, sorting device / screw feeding with vibratory feeder for screw assembly technology Feeding system, feeding unit Manufacturer: SORTIMAT Technology GmbH & Co. Model: SM 200 Year of manufacture: approx. 2000 Top bowl diameter: 270 mm Bottom bowl diameter: 180 mm Internal bowl height: approx. 75 mm Sorting track width: 13 mm Overall height (drive + bowl with sorting track): 250 mm Control voltage: 24 Volt DC (external power supply required) Power connection: 230 Volt, 50 Hz - An external 24 VDC power supply is required for the start/stop signals (the controller does not have an internal 24VDC power unit). - REO controller type Reovib R6 / 439 for adjustable vibration speed Required space Ø x H: 270 x 250 mm Weight: 17 kg In good condition A bowl feeder always consists of two main components: Podpfsx N Ik Asx Agzjha 1) Sorting bowl, in which parts are oriented 2) Drive unit, which creates vibrations in the sorting bowl through mechanical oscillations, thus moving the parts.

Condition: used, Year of construction: 2001, Abrasive belt length 1st unit: 2,150 mm Max. working width: 1,300 mm Number of belts: 3 Belt 1st unit: cross belt Design 1st unit: cross belt Sanding pad 1st unit: electronic segmented pad Abrasive belt width 1st unit: 150 x 4,800 mm Drive 1st unit: kW 2nd unit: longitudinal roller Design 2nd unit: steel calibration roller Abrasive belt length 2nd unit: 2,150 mm Abrasive belt width 2nd unit: 1,350 mm Abrasive belt speed 2nd unit: 18 m/sec 3rd unit: pad unit Design 3rd roller: electronic segmented pressure beam SDS system Sanding pad 3rd unit: electronic segmented, 32 mm width Abrasive belt length 3rd unit: 2,150 mm Abrasive belt width 3rd unit: 1,350 mm Suitable for lacquer sanding: yes Belt air blast: yes Vacuum conveyor: yes Feed speed, fixed: stepless 5 – 15 m/min Control: screen control Electrical/pneumatic belt oscillation: electrical Psdpfx Aoxzi S Nogzsha Infeed height: variable (lower table moves) Table height adjustment: electric motor Table height display: digital Working height / feed table height: 880 mm Location: Supplier

Condition: used, Year of construction: 2018, operating hours: 9,661 h, Drive: Wheel Serial number: FB800xxxx Please contact ATS Norway for more information Phedpfsxu A Rlsx Agzea Please provide reference number upon request: 21731 Specifications: 2018 model Hours: 9661 Machine width: 254 cm Cut 4x4 6 cylinder engine Tires (see pictures) Klepp mek dental tray S70 attachment Oilquick Trailer hitch Trailer setup Auxiliary hydraulics Suspension oscillation Reading of commuting Articulated boom Central lubrication Air conditioning/ac Radio Light Ready for delivery   Description: We have a 2018 Cat M318F Wheeled Machine w/ oilquick and tine bucket for sale. GPS is not included. Everything works as it should according to the owner. The machine has had a service agreement with Pon for 5 years. After the agreement ended, the owner has continued to service it himself. The machine has been well cared for by the owner. Errors and defects may be found. Ready for delivery Hours: 9661 Own weight: 19300 Width: 254 Model: M318F Hjulmaskin m/ oilquick og tannskuffe

Condition: new, Year of construction: 2025, table length 3048 mm table width 1524 mm burner heads 1 Control CNC workpiece weight 1095 kg traversing speed 180 m/min weight 4150 kg dimensions of the machine ca. 9392 x 2232 x 2307 mm Laser cutting system with automatic shuttle table configuration 1. Bodor Power 12kW laser source 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. mortise-and-tenon nameplate welded segmented bed 5. stretched aluminum gantry 6. bodor servo motor and driver 7. bodor rack and pinion 8. one-click processing 9. bodor lightning perforation technology 10. expert database for high-speed cutting 11. automatic adjustment of cutting gas pressure 12. open door protection 13. alarm function for cutting malfunction 14. ergonomic remote control (Bodor Mango®) 15. active anti-collision function 16. intelligent anti-shake 17. gas-saving continuous flow nozzle 18. intelligent maintenance reminder 19. WIFI internet connection 20. water cooler 21. extraction system 22. wear parts set CUTTING CAPACITY: CARBON STEEL (mm) 35 Phsdpex I Sglefx Agzoa STAINLESS STEEL (mm) 35 ALUMINIUM (mm) 25 OPTIONAL: LANTEK EXPERT II CUT Sotware incl. postprocessor

Condition: new, DMC SD 90 RCS 135 "C-Plus" version Technical specifications: Useful working width mm 1350 min/max Working height (with fixed table) mm 4 – 200 Abrasive belts mm 1,370 x 2,620 Feed speed m/min 3.5-18 working aggregates: “MESAR 46” 46 sectors (30 mm) flexible electronic link sanding pad complete with B/46 workpiece sensing bar in the infeed • 1st position: "RA" diagonally ribbed steel contact roller D=250 • 2nd position: COMBI with rubber-coated grinding roller D=175 mm 65 Sh • Floating pressure shoe in 1st position with pneumatic adjustment • 2 grooved rubber coated pressure rollers 2nd and 3rd position • Oscillating blow-off device 1st and 2nd unit • Workpiece cleaning unit with rotating blast nozzles • Motor 1st unit 18.5 kW • Motor 2 with inverter 15 kW Table: • Fixed table working height 900 mm • Infeed roller table for long workpieces • Outfeed roller table for long workpieces • Perforated table and transport carpet 50 Sh • Vacuum table with 4 kW electric fan integrated in the machine frame • Stepless carpet feed from 3.5-18 m/min (gear motor 0.75 kW) Control: • Electronic programming unit "Pro-Sand" • Touch screen 10.4" screen • Door with viewing window on set-up side for machine with 2 working units • LED interior lighting Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. Psdpfxjd E Ixzo Agzsha (We answer your inquiries only with stated address + telephone number!)

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 35 h, functionality: fully functional, machine/vehicle number: 2002-045, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head The machine is sold with one driven circular knife and one punching tool. • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity Podpfx Ajfnlkwjgzeha • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: used, Year of construction: 2018, operating hours: 566 h, Equipment: all wheel drive, GENIE rough-terrain scissor lift, Superdeck, platform extension front and rear, length up to approx. 7,380 mm, working height approx. 18.15 m, 4-wheel drive, load capacity approx. 680 kg, power socket, access from both sides, 2x entry doors, extendable engine, oscillating axle system, hydraulic axle support front and rear, very good condition, vehicle may be wrapped and/or have advertising. Our offer generally does not include a new TÜV inspection. If you require a new TÜV approval, we will be happy to provide you with an offer from our partner workshops! Vehicle may be wrapped and/or labeled with advertising. Our general terms and conditions of delivery and payment apply. We are happy to provide you with a financing or leasing offer for this unit. Please contact us! Phsdpfx Ajxnhiaegzsa

Condition: used, Year of construction: 1997, Number of belts: 2-belt Max. working width: 1100 mm Min. working height: 3 mm Max. working height: 160 mm 1st belt: Calibration roller Diameter of 1st roller: 150 mm Design of 1st roller: grooved rubber roller 90 degrees Shore Sanding belt length of 1st unit: 1900 mm Sanding belt width of 1st unit: 1120 mm Sanding belt speed of 1st unit: 18 m/sec Drive of unit 1: 11 kW 2nd belt: Sanding unit shoe Sanding shoe of 2nd unit: electronic individual links 45 mm segment width Sanding belt length of 2nd unit: 1900 mm Sanding belt width of 2nd unit: 1120 mm Sanding belt speed 2nd unit: 18 m/sec Drive of 2nd units: shared motor with 1st unit with rigid sanding pad for solid wood and frame sanding. Lacquer sanding possible: No. Fixed feed speed: 5/10 m/min. Control: Hand control panel. Electric/pneumatic belt oscillation: Yes. Table lift: Electric. Table display: Digital. Operating pressure: 6 bar. Machine number: E / 79191. Dimensions: 1930 x 1700 x 1980 mm. Motor power: 12 kW. Extraction diameter: 2 x 150. Storage location: Nattheim. Phedpfx Aexq Aptegzsa

Condition: excellent (used), CATALOGUE NUMBER 7768 TECHNICAL DATA - Max. workpiece width: 1100mm - Max. workpiece height: 180mm – From above: - Metal pressure roller - Unit – grooved rubber roller for calibration - Smooth, sliding rubber roller – From below: Phsdpfx Asxliybjgzja - Feed belt - Pneumatic belt oscillation with photo sensors - Electric table lifting - Two feed speed settings - Main motor: 15kW - Feed motor: 1.65kW - Operating pressure: 6–8 bar - Extraction outlet diameter: 200mm - Dimensions (L/W/H): 1700x2240x2020mm - Weight: 1652kg FEATURES – Italian manufacture – calibrating sanding machine – Unpainted – Used machine in very good condition Net price: 16,900 PLN Net price: 4,020 EUR (subject to EUR exchange rate 4.2) (Prices may change with significant exchange rate fluctuations)

Condition: new, Edge sanding machine HOLZKRAFT KSO 200 F - Exhibition machine - Relief rollers on the fence rulers, with swiveling sanding unit, and oscillating sanding belt, Veneer sanding device, Oscillation with separate motor, height-adjustable sanding table, extendable roller table extension, rubberized sanding drum ----- Technical data ----- Sanding belt dimensions: 3,000 x 200 mm, Work table dimensions: 960 x 350 mm, Work table height adjustment: 230 mm, Sanding surface: 1,050 x 300 mm, Belt speed: 20 m/sec, Oscillation stroke: 20 mm, Suction nozzle Ø: 140 mm, Phodpfeu R S Ersx Agzja Motor 400 V: 4.0 HP / 3.0 kW, Dimensions (LxWxH): 1,900 x 900 x 1,350 mm, Weight: 290 kg - new exhibition machine -

Condition: used, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2025-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade Phjdpfx Aowgc I Rjgzoa • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: used, Year of construction: 2021, Exhibition unit (little used) Unit for cutting soft materials such as honeycomb cores, acoustic elements and fabrics using oscillating movements Processing options: Cutting straight or radial cutouts Typical areas of application: • Textiles: Cutting fabrics or textiles (e.g. leather, felt, etc.) • Cutting honeycomb cores for doors, staircase construction, exhibition stand construction, caravan construction • Acoustic elements: Cutting polyester, foam or other sound-absorbing materials • Aviation, boat building, aerospace: Cutting honeycomb cores Technical specifications Max. input speed: 6,000 min-1 Max. output speed: 9,000 min-1 Gear ratio: 1:1.48 Max. torque: 8 Nm Permissible operating temperature: max. 85°C Position of the torque arm to the tool: 360° Processing angle: 0° Number of tool outputs: 1 / fixed Lubrication: Grease / lifetime grease filling Amplitude: 4 mm Frequency: 150 Hz Phsdpfxevvi Iqj Agzea Storage location: Garbsen

Condition: excellent (used), Catalogue number: 7808 TECHNICAL DATA Max. working width: 1100 mm Max. working height: 160 mm 2 Units: 1) Grooved rubber roller for calibration 2) Rubber roller + shoe + steel roller – Top section: 2 steel rollers, slip type Units: Cleaning brush – Bottom section: Feed belt Pneumatic belt oscillation with photocells Electric table lifting 2 feed speeds: 1.1 kW Main motor: 15 kW with pneumatic brake Additional pneumatic shoe Operating pressure: 6-8 bar Extraction connection diameter: 2x160 mm, 1x120 mm Overall dimensions (L/W/H): 2700x2100x2200 mm Approximate weight: 3000 kg – German-made – 2 working units – Additional pneumatic shoe included – Unpainted – Used wide belt sander in very good condition Psdpoxwyhtsfx Agzsha Net price: 35,900 PLN Net price: 8,550 EUR (depending on exchange rate 4.2 EUR) (Prices subject to variation due to currency fluctuations)

Condition: used, Year of construction: 2022, Oscillating cylinder grinding machine – technical specifications: A possible screwed version for spindle sleeve clamping. Something similar to the ProLoc device is used. Storage location: Nattheim. Phodswhqprjpfx Agzea

Condition: excellent (used), Catalogue No.: 7810 Phsdpfx Aoxwykbegzsa TECHNICAL DATA max working width: 630 mm max working height: 110 mm 2 units: 1) grooved rubber roller for calibration 2) grooved rubber roller for calibration + pad + metal roller *from above: metal feed-in slip roller unit metal slip roller unit metal slip roller *from below: 2 metal slip rollers feed belt 2 metal slip rollers pneumatic belt oscillation 2 feed speeds motor: 2×7.5 kW electric table elevation operating pressure: 6-8 bar extraction port diameter: 2x160 mm overall dimensions (L/W/H): 1650x1060x1970 mm weight: 972 kg – Polish manufacture – 2 units – unpainted – very good condition – used sander Net price: 25,900 PLN Net price: 6,160 EUR (at exchange rate 4.2 EUR) (Prices may fluctuate with significant currency changes)

Condition: used, Year of construction: 2022, Oscillating cylinder sanding machine, technical specifications: A possible screw variant for spindle sleeve clamping. Something similar to a ProLoc device is used. Storage location: Nattheim Pedpfx Agjwhqplszsha