Used Packer for sale (269)

Condition: new, Year of construction: 2025, Sidesleever for thick PE films, that can do full wrapping of the product. All 4 sides are properly sealed. XXL version for very large products, inclusive suitable shrink tunnel. Low cost packaging solution even for large products of up to W+H Gbodpfx Alov Nl Ruo Uou

Condition: new, Year of construction: 2025, High speed sleeve shrinking machine to do multipacks of bottles, cans, etc. including module to add a pad underneath the multipack. Including shrink tunnel. Suitable to do 2x3, 3x4, 4x6 or other arrangements of containers. Suitable for PE shrink film with a thickness of 60-100µm and a film transverse contraction ratio of 30-40% and a longitudional contraction ratio of 60-70%. - Specifications: SIEMENS PLC control and SIEMENS touchscreen, SCHNEIDER contactor, FESTO cylinder, SIEMENS servo motors to feed and cut the film; bottle (can or container) size: 0.25 to 1.5 liter, diameter: 50-120mm, height: 120-300mm; max. dimensions for the complete multipack: L(150-720)xW(250-450)xH(120-300)mm; max. speed of the machine in neutral: 45 cycles/min; total dimensions: L6800xW1650xH2270mm, 5500kg; power: 380V, 9kW (machine) and 380V, 63,75kW (shrink tunnel); compressed air: 160 liter/min, 6bar. Gedpfx Aev Nl R Isl Usbu Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Sleevepacker for a full 4-side wrapping of long and very long products like panels, etc. Suitable for single or multipacks. Underneath the product the film is overlapping and connected by heat (no sealing). Automatic Infeed through conveyor, automatic outfeed into optionally available SHRINKtunnel-PE-XL. - Technical Specifications: MITSUBISHI/Japan PLC; 380V, 2kW; 6.0bar, 0.1m³/min; max. speed of the machine in neutral: 25 cycles/min; max. product dimensions (mm): L(unlimited)xW500xH330; sealing blade length: 700mm; machine dimensions (mm): L2000xW1500xH1900; weight (net/gross): 500/580kg. Gbodpfxjv Nl Iys Al Usu Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, High speed sleeve shrinking machine to do multipacks of bottles, cans, etc. without using a tray or a pad. Including shrink tunnel. Suitable to do 2x3, 3x4, 4x6 or other arrangements of containers. Suitable for PE shrink film with a thickness of 60-100µm and a film transverse contraction ratio of 30-40% and a longitudional contraction ratio of 60-70%. - Specifications: SIEMENS PLC control and SIEMENS touchscreen, SCHNEIDER contactor, FESTO cylinder, SIEMENS servo motors to feed and cut the film; bottle (can or container) size: 0.25 to 1.5 liter, diameter: 50-120mm, height: 120-300mm; max. dimensions for the complete multipack: L(150-720)xW(110-450)xH(120-300)mm; max. speed of the machine in neutral: 50 cycles/minute; total dimensions: L8345xW1460xH2400mm; weight: 5000kg; power: 380V; 6kW (machine) and 380V, 63.75kW (shrink tunnel); compressed air: 60 liter/min, 6bar. Gsdpfxov Nl Rzj Al Ujbu Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, High speed SLEEVEshrink machine for multipacks, also suitable for printed film. For round and quadrate containers (bottles, cans, glases). Special film guidance from one roll only. Continuous and smooth film transport. Complete System including shrink tunnel. While moving the products forward the formation of the products is configurated. – Specifications: Packaging formations: 2x3, 3x4, 3x5, 4x5, 4x6 (depending on product / max. multipack size ca. L500xW600xH350 mm); max. speed of the machine in neutral: 35 cycles/minute; servo motor control system and 10" LCD Color Operating Touchscreen; strength of film: 60-120µm; film width: up to 600mm; film diameter: 450mm; suitable film type: PE-film; chamber size shrink tunnel: L3000xW700xH450mm; shrinking temperature: 200-280°C; power: 380V, 65kW; compressed air: 1.0m³, 6bar; total dimensions: L15000xW1530xH2500mm (incl. conveyor belts); total weight: 4.500kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Gbjdpfx Alsv Nl Nws Ueu

Condition: new, Year of construction: 2025, High speed sleeve shrinking machine to do multipacks of bottles, cans, etc. including module to build up (NORDSON glue system) and add a tray underneath the multipack. Including shrink tunnel. Suitable to do 2x3, 3x4, 4x6 or other arrangements of containers. Suitable for PE shrink film with a thickness of 60-100µm and a film transverse contraction ratio of 30-40% and a longitudional contraction ratio of 60-70%. - Specifications: SIEMENS PLC control and SIEMENS touchscreen, SCHNEIDER contactor, FESTO cylinder, SIEMENS servo motors to feed and cut the film; bottle (can or container) size: 0.25 to 1.5 liter, diameter: 55-120mm, height: 120-300mm; max. dimensions for the complete multipack: L(150-720)xW(250-450)xH(120-300)mm; max. speed of the machine in neutral: 50 cycles/minute; total dimensions: L10070xW1650xH2485mm; weight: 5600kg; power: 380V, 13kW (machine) and 380V, 63.75kW (shrink tunnel); compressed air: 160 liter/min, 6bar. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Gbodpfx Aljv Nl R Uo Usu

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, KRONES SPIRIT / WHISKY COMPLETE FILLING LINE CONDITION IS EXCELLENT 500 BPM 700ml / 750ml / 1000ml YEAR 2003 KRONES ISOFILL VARIOJET 108 HEAD FILLER - 72 HEAD RINSER ZALKIN 18 HEAD CAPPER KRONES TOPMATIC LABELLER KETTNER CASE PACKER / DE-PALLETISER / PALLETISER PLUS MUCH MORE PRICE GBP £155,000.00 EXW CONACT INDASSOL NOW FOR DETAILS Gjdpfx Aezn N T Hel Uebu

Condition: ready for operation (used), TETRA PAK COMPLETE FILLING LINE, INCLUDES: - TBA/8-1000 SLIM FILLER, VERSION 120, YOM 2009, 27.000 RUNNING HOURS - CAP30 HELICAP23 100V CAP APPLICATOR - TCBP70 WRAP AROUND PACKER, V110 WITH RENOVATED EL. BOX - EASY RIDE ACCUMULATOR - CONVEYOURS SYSTEM EXCELLENT CONDITION, STILL RUNNING Godpfoxz Eztex Al Usbu

Condition: used, Year of construction: 2003, Overview  The complete filling line for big size PET bottles is located at a mineral water plant and was used for filling water. The line has been regularly serviced and is in very good condition. Output: 5,000 bph List of machines Blow moulder | Nissei ASB | NB-40MC | 2003      Preforms feeder      Preforms tipper      Transporters | AVE | 2004      Injection and blowing | Nissei ASB | PF4-1BH |2000      Dryer Moretto | 2000   Loader Moretto | 2000   Heater Moretto | 2000   Transporters | AVE | 2004      Lot Coder | Marken | Smartlase 110i | 2009      Rinser - Filler - Capper | GyM | Tribloc 9-12-3| 2012      Labeller|Auxiemba | Basic 720-6-HM-iz  | 2010 | 7000 bph Gsdpfxszqvcyj Al Ujbu Shrink Packer | SMI | ST-2000 | 2009 | 30 packs / min Handle applicator | SMI HA 25Sx | 2012 | 25 packs /min Palletizer | Lapeyra | RP1C | 1992 (retrofit as CE RD1215) Wrapping|Impropak | Girospak 747 SBP | 1990 (retrofit as CE RD1215) Transporters | AVE | 2000     

Condition: used, Reusable glass bottle filling line for filling fruit juice and juice mix drinks. The filling line consists of the following components: - New glass bottle lifter (Kettner, 1985) with pallet loading, gripper head, empty pallet removal, bottle table and intermediate layer remover - Empty palletiser (Kettner 1994) with pallet loading, gripper head, crate table and empty pallet removal - Unpacker (Kettner, 2002) with packing heads and gripper tulips - Crate washer (Bohrer), crate cleaning trough with two crate turners - Unscrewing machine (Adelski, approx. 1990) with 12 unscrewing heads - Bottle cleaning machine (Krones, 1994) single-end machine - Empty bottle inspector (Heuft) for checking the base, mouth, side walls, thread and residual liquid - Filler (Bertolaso, approx. 1990) for hot filling with 60 filling valves and capper for twist-off caps. - Tunnel cooler (Niko, 2015) for spray cooling of the filled beverage - Labelling machine (Krones) for cold glue labelling of belly, back and neck labels - Label inspection (Metec) - Inkjet printer (Markem-Imaje, 2012) for best-before date marking - Packer (Kettner, 1989) with packing heads and gripping tulips - Palletiser (Kettner) with empty pallet feeding, gripping head and raised working platform with control panel - Pallet securing device (Bornbinder) for strapping the pallets with a horizontally applied cord - Film wrapper (Robopac) for wrapping the pallets with stretch film Additional title: Returnable bottle filling line with palletising, year of manufacture 1985 - 2015 Capacity: 15000 bo/h referring to 0.5 l bottles Formats: 0.2 l; 0.25 l; 0.5 l; 0.75 l, 1.0 l bottles / 6-packs, 12-packs, 20-packs and 30-packs / twist-off caps / Euro and brewery pallets Gbedpfxoz D Hmmj Al Uou Operation / Control: S7-300 (pallet wrapper), otherwise S5 or Schleicher control system Features: New glass lifter, depalletiser, unpacker, crate washer, unscrewer, bottle cleaning machine, empty bottle inspector, Glass bottle filler and capper, tunnel cooler, labelling machine, label inspector, date coder, packer, palletiser, pallet strapper, pallet wrapper

Condition: used, Packaging line with Transnova-RUF Pick-&-Place, Garvens, Safeline, Mengozzi For sale is a complete packaging and inspection line from industrial use. Main components: - Pick-&-Place packer: Transnova-RUF including infeed and carton handling - Checkweigher: Garvens - Metal detector: Safeline (Mettler Toledo) - Infeed / singulation system: Mengozzi - Pusher / rejection unit - Conveyor technology and line connections Gsdpoy Exbdofx Al Uobu Description: The system was used for automated: - Product infeed and singulation - Weight inspection - Metal detection - Rejection of faulty products - Pick-&-Place packaging into cartons / trays Suitable for applications in the food or FMCG industry. Condition: - Used complete line - System out of operation - Functionality not tested - Completeness not guaranteed - Sale as-is / as inspected Terms of sale: - Preferably sold as a complete unit - EXW (ex works), self-collection - Company sale – without warranty, guarantee or return

Condition: used, Year of construction: 2006, functionality: fully functional, UHLMANN BLISTER LINE Blister line for pharmaceutical production in cleanrooms. From a GMP-compliant cleanroom environment and regularly maintained, fully automated and modular, easy to integrate into existing production lines. Comes with complete technical documentation, and has been decommissioned for internal production. Consisting of: 1) UHLMANN BLISTER PACKER, MODEL UPS 4 Year of construction: 2006 PRODUCTION CHARACTERISTICS - Output: 15-50 cycles/min - Forming width: 62 - 226 mm (min - max) - Blister format: min. 60 mm; max. 140×39 mm - Depth: pvc 12 mm; alu 10 mm ENERGY CONSUMPTION - Voltage: 3/N/PE AC 400 V - Current: 30 A DIMENSIONS - Weight: 4.950 kg 2) UHLMANN CARTONING MACHINE, MODEL C2206 Year of construction: 2005 PRODUCTION CHARACTERISTICS - Max. output: 200 cartons/min. - Max. carton size: 130 x 100 x 200 mm - Max. no. of blisters: 10 - Closures: tuck-in, hot-melt - Products: blisters, bottles DIMENSIONS - Weight: 6,000 kg ENERGY CONSUMPTION - Voltage: 3/N/PE AC 400 V - Current: 15 A 3) INOVA LABELLER, MODEL EKK 62 Year of construction: 2006 ENERGY CONSUMPTION - Voltage: 230/400 V - Frequency: 50 Hz - Current draw: 9 A 4) INOVA ASSEMBLY AND EJECTION UNIT, MODELS VSM1221 + TD210 Year of construction: 2006 ENERGY CONSUMPTION (BOTH MACHINES) - Voltage: 230/400 V - Current draw: 5 A 5) BAUSCH + STRÖBEL TRAYPACKER, MODEL ESS1001 Year of construction : 2013 PRODUCTION CHARACTERISTICS - Max. output: 12.000/hour - Label length: 20 mm - 120 mm - Label height: 15 mm - 80 mm DIMENSIONS - Weight: 900 kg 6) HAPA INKJET PRINTER, MODEL H-230 Year of construction: 2005 PRODUCTION CHARACTERISTICS - Max. cycles: 120 cycles/min - Max. print speed: 21.6 m/min - Printhead resolution: 360 dpi - Belt width (min - max): mm 64 - 310 - Feed length (min - max): mm 30 - 180 - Print length (min - max): mm 30 - 180 7) SORTIMAT BLISTER HANDLER, MODEL CL400 VTS Year of construction: 2016 DIMENSIONS - Weight: 2,340 kg ENERGY CONSUMPTION - Power: 3.4 kW / 5.0 A 8) UHLMANN BUNDLING MACHINE, MODEL E 3060 Year of construction: 2006 PRODUCTION CHARACTERISTICS - Output: 60 bundles - Carton sizes: 130 x 105 x 250 mm (max) - Bundle size: 250 x 150 x 250 mm (max) - Infeed capacity: 500 cartons DIMENSIONS - Size: 1,400 x 2,000 x 4,300 mm (approx.) Gjdjzbhnwepfx Al Uebu - Weight : 2,100 kg ENERGY CONSUMPTION - Voltage: 3/N/PE AC 400 V - Current: 18 A 9) OPTIMA SYRINGE DISPENSER, MODEL SH120 Year of construction: 2008

Condition: used, Year of construction: 2018, Overview This compact automated can filling line was manufactured with main equipment from KHS, Ferrum, Ska Fabricating and Atlanta. The line is designed for beverage can production and includes depalletizing, can transport, ionized air rinsing, filling, seaming and downstream film / shrink packaging. The core of the line consists of a KHS Innofill Can C filling system combined with a Ferrum FC03 can seamer. The system is integrated with overhead and floor-mounted can conveyors and is arranged in a compact production layout. Gbjdsy Tt H Dopfx Al Uju Technical Data - Manufacturer / main equipment: KHS / Ferrum / Ska Fabricating / Atlanta - Line type: Automated can filling line - capacity: 15.000/h - Number of filling valves: 21 - Number of seaming heads: 3 - Container type: 330ml, 440ml, 500ml standard can - Packaging type: loose cans into 12 & 24 trays and WA boxes - Year: 2018 - Operating hours: 3,446 h - Layout: compact canning line layout with overhead and floor-mounted conveyor sections Scope of Delivery - Can Depalletizer | Ska Fabricating Co. | – | Enclosed depalletizing system with safety guarding | 2018 - Can Conveyor System | KHS / AE | – | Overhead and floor-mounted conveyor network for empty cans and line transfer | 2018 - Ionized Air Rinser | Ska Fabricating Co. | AV-C500 | Empty can rinsing / cleaning module before filling | 2018 - Can Filler | KHS | Innofill Can C | Automated can filling system | 2018 - Fill level detection | Heuft | - - Can Seamer | Ferrum | FC03 | Rotary can seaming unit | 2018 - Can dryer | Air control industries | 2018 - Labeller | Pack Leader Advanced Dynamics | Pro-516 | Labelling machine incl. roller feed | 2018 - Case Packer | Atlanta | Rafaello 726 | packaging system | 2018 - Case Packer Printer | SATO | S86-EX | 2018

Condition: like new (used), Year of construction: 2025, For sale is a used JET panel saw JTS-600XL with a maximum cutting length of 1600 mm. The machine was only briefly used for demonstration purposes in our showroom and is therefore in as-new condition. Technical data: - Motor: 230 V / 1.5 kW / 2 HP - Saw blade speed: 4000 rpm - Saw blade diameter / bore: 250 / 30 mm - Saw blade tilt: 0° – 45° - Max. cutting depth at 0°: 80 mm - Max. cutting depth at 45°: 54 mm - Max. cutting width at rip fence: 610 mm - Table dimensions: 800 x 350 mm - Table extension: 415 x 350 mm - Table widening (right): 800 x 270 mm - Precision sliding table: 1600 x 255 mm - Max. cutting length: 1600 mm - Machine dimensions: 1650 x 2200 x 1100 mm - Weight: 157 kg Scope of delivery: - Sliding table 1600 x 255 mm - Circular saw blade Ø 254 x 30 x 3 mm - 36 TCT teeth - Parallel fence - Support table 460 x 600 mm with extendable crosscut fence 2200 mm - Extraction port Ø 100 mm The machine is located in A-8561 Söding and can be inspected during our business hours at any time. Subject to prior sale! Related terms: saw, circular saw, panel saw, format Gbsdpfx Asy Nm H Ael Usu Reference: R-D1618

Year of construction: 2001, condition: excellent (used), - TBA21/1000 FILLER V50, 15.000 RUNNING HOURS, - APPLICATOR TCA88, - WRAP AROUND PACKER TCBP70, V110, - EASY RIDE PRUS ACCUMULATOR - CONVEYORS. EXCELLENT CONDITION - CONVEYORS. EXCELLENT CONDITION-STILL RUNNING TILL THE END OF JANUARY. Gbedpfxjfc I H De Al Uou OPTION: INSTALLATION AND START UP SERVICE

Condition: used, Year of construction: 2004, Carton erection and packaging system Description: The machine is used to repack 0.5 l bottles from modular crates into carrier boxes of 4. It is connected to the palletizing system and packer via conveyor belts and consists of the bottle carrier erector and the unpacker/packer. Bottle carrier erector: Here, pre-glued cardboard cuts are manually inserted into the magazines by the operating personnel, from there they are automatically removed, erected and transported to the bottle carrier inserter in two lines using a belt conveyor. Unpacker and packer: Here the full modular crates are unpacked individually. The bottles run along a short conveyor belt to the packer/bottle carrier inserter, who packs them into the erected boxes. The filled boxes are then transported to the crate packer. Additional title: Box unpacker for module crates with a box erector and box packer Capacity: 200 crates/h Gbodpfx Aleztybxj Usu Formats: bottle crate (400 x 300 mm) Operation / Control: Control cabinet with control panel Position: free standing Base construction: Aluminum profile frame with viewing windows, screwed to the floor on base plates Features: Bottle carrier box magazine, bottle carrier erector, unpacker, packer, conveyor belts, control cabinet Layer patterns: 2x2 bottles/carton

Condition: used, Year of construction: 2012, Overview Gjdpfeza Tx Sjx Al Usbu This returnable glass bottling line consists of equipment from KRONES, KETTNER, GM GERA, RINK, SYSCONA, MATEC, FALTERBAUM, Bohrer and further supporting manufacturers. The line is designed for the processing of returnable glass bottles in crates, mainly in 0.33 L and 0.75 L formats. It includes the key process steps from crate depalletizing, crate sorting, bottle decapping, unpacking, bottle washing, empty bottle inspection, filling and screw capping to labelling, full bottle inspection, crate packing, crate inspection and palletizing. The existing crate depalletizer and palletizer are available on site; however, due to their age and outdated technology, it is recommended not to include this unit in the line acquisition. Instead, suitable modern depalletizing equipment can be offered and integrated into the line concept according to the buyer’s requirements. The line has a nominal filling capacity of approx. 18,000 bottles per hour and the premix system rated at 22,000 L/h. The line is scheduled for dismantling in February 2027. Technical Data - Line type: Returnable glass bottling line - Application: Beverage filling in returnable glass bottles - Formats: 0.33 L and 0.75 L glass bottles - Packaging: Bottles in crates - Filler capacity: 18,000 bottles/hour - Premix capacity: 22,000 L/hour - Closure type: Plastic screw caps - Labelling: Wet glue labelling, 2 aggregates - Main machine years: 1996 – 2016 - Dismantling planned: February 2027 Scope of Delivery - Crate Depalletizer | Existing unit on site; not recommended for takeover due to outdated technology. Suitable replacement equipment can be offered and integrated - Crate Sorting System | Syscona | Expert KSA | Sorting on 2 lanes: good / bad | 2014 - Crate Decapper | RINK | KM 690/4K | 2012 - Crate Unpacker | Kettner | Robot Junior RA3/C-T | 1996 - Bottle Washer | GM GERA | ARCADE GEL3 FV1-186/95-16 | 2005 - Crate Washer | Bohrer | R 30 | Crate washing machine | 2011 - Empty Bottle Inspector | Krones | Linatronic | 2014 - Filler / Screw Capper | Krones | Volumetic / Modulfill | 2012 - Labelling Machine | Krones | Universella | 2012 - Closure Inspection | Syscona | Expert FHK | 2016 - Inspection System | Krones | Checkmat 731 | 2012 - Crate Packer | Kettner | 1996 - Crate Inspection | Krones | Checkmat 708 | 2011 - Palletizer | Matec | Rotomat 3B | 2002 - Falterbaum | 20000TD | Premix system; capacity 22,000 L/h | 2000

Condition: like new (used), JBT Automatic Can Seamer with 48-Piston Filling Unit – Stainless Steel JBT automatic can seamer with a 48-piston filling unit, designed to integrate product dispensing and hermetic can sealing operations within high-production industrial packaging lines. The unit incorporates a 48-piston filling system, enabling continuous and synchronized dispensing before transferring the containers to the sealing section. Its configuration is specifically designed for installations requiring high production speeds, consistent filling, and reliable container sealing. The machine features a robust industrial design primarily in stainless steel, with a fully enclosed and protected work area to ensure safety during production. MAIN FEATURES -Manufacturer: JBT -Type: Filling + automatic can seamer -Filling unit: 48 pistons -Rotary filling system -Automatic and continuous dispensing -Automatic can feed -Synchronized transfer between filling and sealing -Automatic cap feed/positioning system -Mechanical hermetic can sealing -Continuous industrial operation -Designed for high-production lines -Construction primarily in stainless steel -Complete enclosure of the work area -Access doors with inspection windows -Safety guards -Automatic lubrication/service system, depending on configuration -Integrable into complete filling and canning lines PROCESS Empty cans automatically enter the machine and are transferred to the rotary 48-piston filling unit. During their movement, the pistons perform controlled dispensing of the product into each container, providing a repetitive process suitable for continuous production. Once filled, the cans are synchronously transferred to the sealing section. The lid is positioned on the container, and the sealing system performs the mechanical seaming between the can body and the lid, resulting in a hermetically sealed container. The cans can then continue to: Can washers Gbsdpfozbi Niox Al Uju Inspection systems Weight checkers Detectors Autoclaves/retorts Pasteurizers Cooling systems Labeling machines Case packers Palletizers APPLICATIONS Particularly suitable for canneries and industrial food manufacturers who need to integrate filling and sealing in a high-capacity automatic line. Depending on the configuration, format, and dispensing system installed, it can be used for different food products packaged in cans, including products with liquid or semi-liquid components and other formulations compatible with the filling system. The JBT 48-piston unit is especially attractive for installations seeking high production capacity and simultaneous dispensing of multiple containers, immediately followed by automatic sealing. Machine available for inspection. Additional technical information, can formats, capacities, production speed, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), CUOMO AGM4 Automatic Can Seamer with 24-Valve Vacuum System The CUOMO AGM4 automatic can seamer is equipped with a 24-valve vacuum system, designed for continuous operation in industrial canning lines. It evacuates air from the headspace and then hermetically seals metal containers. The system combines a 24-valve rotary unit for vacuum operation with the automatic seamer, allowing the inside of the can to be conditioned before the double seaming process. This configuration is particularly suitable for canned products where it is necessary to reduce residual air and achieve an adequate vacuum in the sealed container. MAIN FEATURES -Manufacturer: CUOMO -Model: AGM4 -Type: Automatic can seamer with vacuum system -Vacuum system: 24 valves -Automatic and continuous operation -Automatic can feeding -Can treatment under vacuum -Reduction of air in the headspace -Synchronized transfer to the seamer -Automatic cap feeding and positioning -Mechanical sealing system -Double seaming -Automatic discharge of sealed cans -Construction primarily in stainless steel -Fairings and safety guards -Electric drives -Robust industrial design -Integrable into complete canning lines PROCESS Pre-filled cans automatically enter the 24-valve unit, where the vacuum operation is performed before sealing. This process reduces the amount of air in the can, helping to achieve the required vacuum conditions after sealing. Next, the cans are synchronously transferred to the CUOMO AGM4 seamer. The lid is placed on each can, and the sealing mechanism performs the necessary operations to form the hermetic double seam between the lid and the can body. Once sealed, the cans can continue to: Can washers Seam inspection systems Weight checkers Autoclaves Pasteurizers Cooling systems Gbedpozxw Akofx Al Usu Labelers Case packers Palletizers APPLICATIONS Particularly suitable for canning industries processing vegetables, fish, meat, ready meals, and other canned food products where it is necessary to control residual air and the can's vacuum before or during the sealing process. The compatible can formats and dimensions will depend on the tooling currently installed and the specific configuration of the machine. The combination of CUOMO AGM4 + 24-valve vacuum system provides an industrial solution for automatically performing the vacuum conditioning and subsequent hermetic sealing of cans. Machine available for inspection. Additional technical information, can formats, production speed, vacuum level, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), TOYO JIDOKI TVP-E3 Automatic Vacuum Pouch Filling and Sealing Machine TOYO JIDOKI TVP-E3 automatic vacuum pouch filling and sealing machine, designed to automatically perform pouch feeding and handling, product filling, vacuum generation, and hermetic sealing operations within industrial packaging lines. The vacuum sealing system allows air to be extracted from the inside of the pouch before sealing, resulting in a compact and hermetically sealed package. This technology is particularly useful for food products where the goal is to reduce residual air inside the package before subsequent heat treatment, cooling, storage, or distribution operations. MAIN FEATURES -Manufacturer: TOYO JIDOKI -Model: TVP-E3 -Type: Automatic vacuum pouch filling/sealing machine -Application: Flexible pouches -Automatic operation -Automatic pouch handling and positioning -Multiple process stations -Product filling system -Vacuum system -Air extraction from inside the pouch -Automatic heat sealing -Control of the different stages of the cycle -Synchronized transport and transfer -Control panel / HMI -Industrial construction, primarily in stainless steel -Enclosures and safety protections -Illuminated status indicators -Designed for continuous industrial operation -Integrable into complete packaging and heat treatment lines PROCESS The pouches are fed into the system and automatically positioned at the different workstations. Once the pouch is opened and correctly positioned, the product is filled using the corresponding dosing system. Subsequently, the pouch moves to the vacuum stage, where the air present inside the package is reduced. Finally, the machine performs heat sealing of the top of the pouch, resulting in a sealed pouch ready for the next stages of production. Depending on the line configuration, the pouches can continue to: Inspection systems Weight checkers Metal detectors Pouch washing machines Pasteurizers Autoclaves / retorts Cooling systems Dryers Case packers End-of-line equipment Godszxwy Aspfx Al Usbu APPLICATIONS Especially suitable for the food industry, canning industries, and manufacturers of products packaged in pouches. Depending on the dosing system and the installed format, it can be used for different liquid, semi-liquid, solid products with liquid coating, and prepared foods, always subject to the specific configuration of the equipment. The combination of TOYO JIDOKI technology, automatic pouch packaging, and vacuum sealing provides an industrial solution for obtaining hermetically sealed flexible packages with an automated and repeatable process. Machine available for inspection. Additional technical information, pouch formats, production capacity, dosing system, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2007, Overview This complete can filling line was manufactured mainly in 2007 and is designed for the filling of beer, carbonated soft drinks and other carbonated beverages in aluminium cans. The line has a capacity of approx. 6,000 cans per hour and is suitable for several can formats, including 250 ml slim, 330 ml sleek, 330 ml standard and 500 ml standard cans. The line includes depalletizing, carbonation, filling and seaming, tunnel pasteurization, tray packing / shrink wrapping, conveyors and control system. The equipment is still installed, currently out of production and available for inspection in Northern Europe. The layout shows a compact line arrangement with depalletizer, filler / seamer, tunnel pasteurizer and downstream packaging area. Technical Data - Line type: Complete can filling line - Capacity: approx. 6,000 cans/hour - Main year of manufacture: 2007 - Application: Beer, CSD and carbonated beverages - Can formats: 250 ml slim, 330 ml sleek, 330 ml standard, 500 ml standard - Packaging: 3x4 or 4x6 trays with shrink foil Gbodpfx Aozh Ifuel Usu - Filling / seaming: Monoblock 16/4 - Control system: Siemens SIMATIC S7-300 - Condition: excellent condition - Status: still installed, currently out of production - Location: Northern Europe Inspection: possible anytime Scope of Delivery - Can Depalletizer | TMG Impianti | – | Included with conveyors | 2007 - Carbonator | Comac | Carbonator 1 Column | - | 2007 - Filling & Seaming Monoblock | MCD Bottling Solution / Comac | Can Filler 16-4 P.164.85 | 16 filling valves / 4 seaming heads | 2007 - Tunnel Pasteurizer | Comac | Tunnel Pasteurizer | 2007 - Tray Packer / Shrink Wrapper | Dimac | Star One | For 3x4 and 4x6 trays with shrink foil | 2007 - Can Conveyors | Various | – | Complete conveyor system included | 2007

Condition: used, Year of construction: 1992, Overview This complete automatic can filling line has a nominal output of approx. 20,000 cans/hour for 330 ml cans (can type 211/202), packed 24 cans per foil-shrunk tray. The core is an O+H / KHS Hansacan filler with 30 filling valves, mechanically blocked to a Ferrum F 505 G seamer with 5 seaming heads. Empty cans are supplied by a TMG Impianti Vega 120/B depalletizer and rinsed on a Hysek Rinsstar 20000 rinser before filling. A date/coding printer is not included. Gjdpfx Aezlqu Tol Ujbu Technical data - Line type: Complete automatic can filling line - Nominal output: approx. 20,000 cans/hour (330 ml), product- and temperature-dependent - Container: 330 ml can, can type 211/202; 24 cans per foil-shrunk tray - Controls: PLC Siemens S7, Siemens SIMATIC HMI - Warmer and drying station reconditioned; fill-height control and packaging machine new Equipment - Can Depalletizer | TMG Impianti | Vega 120/B | tier-sheet removal, can table, pallet magazine | 2014 - Can Rinser | Hysek | Rinsstar 20000 | filtered-water rinse | 2001 - Can Filler | O+H / KHS | Hansacan | 30 filling valves, fixed for can type 211/202, will be general overhauled | 1992 - Can Seamer | Ferrum | F 505 G | 5 seaming heads, blocked with the filler | 2010 - Can Warmer | SMB | stainless-steel tunnel | warms cans to approx. 25 °C before packaging | reconditioned - Fill-Height Control | Heuft | incl. pushing/reject station | new - Can Drying Station | Gesete | air-dries cans before coding | reconditioned - Packaging Machine | Termo Pack | UMT-1500 | tray erector, packer and foil shrink | new - 2x can turning stations (330 ml can) - Can conveyor system incl. electrical control panel (PLC Siemens S7) - Tray conveyor system incl. drive station Condition Used line delivered in reconditioned or new condition. The filler and Ferrum seamer are reconditioned and blocked as one unit with a new electrical panel (PLC Siemens S7), new pneumatic panel and renewed pneumatic valves; the can warmer and can drying station are reconditioned; the fill-height control and packaging machine are supplied new. This work is carried out as part of the order, so the line is supplied component by component and is not yet assembled or tested as one running unit. The can depalletizer is the exception - it is already fully reconditioned and in stock. Filler and seamer are delivered with CE declaration and full documentation. Components can be inspected on request. Availability On request; delivery time as per agreement. Reconditioned and new-build components are supplied with a lead time after order. Location and inspection on request.

Condition: like new (used), Year of construction: 2024, For sale is a used Hammer A3-41 planer-thicknesser with a planing length of 1800 mm. The machine has been inspected by our specialist staff and is in mint condition. Technical specifications: - Planing thickness width 410 mm - 3 knife blocks (reversible knives) - Dual folding planing tables - Planer stop pivots 90-45° Gbedsv Scx Ujpfx Al Uou - Thicknessing height 4-225 mm - 5.5 HP (4 kW) motor / 400 volts - Year of manufacture 2024 - Machine number 52.02.285.24 The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: planer, thicknesser, planer, planing, thicknessing Reference: R-L0J2U

Year of construction: 2001, condition: ready for operation (used), A paving stone production line Omag, which has been continuously optimized and upgraded to the latest technical standards, is available. Overhauls: 1) Conversion for an additional hydraulic unit for additional load in 2020. 2) Conversion to servo-vibration with Siemens S7 control in 2016. 3) Conversion to digital path measurement of mould and ram in 2017. 4) New core filling carriages in 2017. Plant components: 1) Board destacker and board stacker including roller conveyor. 2) Board feeder (advance) and board conveyor (scraper) to the lifting frame. 3) Board turner. 4) Horizontal and vertical bundling units Ridder & Signode, years of manufacture: 1994 and 1983. 5) Trafo lifting platform including motors and without control, year of manufacture: 1983. 6) Doppler including hydraulic unit, year of manufacture: 2004. 7) Stone packer Omag K1400 including hydraulic unit, year of manufacture: 1997. The line has no base boards. 8) Stone finisher Omag S22 140-90, year of manufacture: 2001. Documentation available. An on-site inspection is possible. Gbedpfx Alow R Uzis Ueu

Condition: used, Year of construction: 1999, Overview  This complete hot-fill and cold-fill bottling line was manufactured in 1999 – 2017 by Germany KHS and Krones. The line is designed for beverage production in glass and PET bottles, supporting both hot-fill and cold-fill applications. It was in operation until the end of 2025, is still installed, and is available immediately. The line can be inspected on request. Technical data  - Capacity: 12,000 – 36,000 bottles/hour (example: approx. 33,000 bph @ 500 ml) - Formats: 250 ml – 1000 ml - Application: Hot-fill and cold-fill beverage production - Container types: Glass bottles and PET bottles (hot-fill) - Filling temperature: 10°C – 104°C - CO₂ capability: Yes - Closures: - Glass: 28 mm aluminium, 33 mm / 43 mm aluminium twist-off - PET: 38 mm 3-start hot-fill closure Gsdpfx Aljyx I Awo Uobu - Labelling: Cold glue paper labels (optional sleeve labelling available) - Packaging: Wrap-around cartons and tray packaging (no shrink wrapper included) Scope of Delivery  - Depalletizer | Meypack | DL 71 | - | Low-level depalletizer with pallet conveyor and magazine - Bottle rinser | Niko | Linear Rinser | 1999 | Siemens S7 PLC, heat recovery system - Filler | KHS | Innofill DNR 80 | 1999 | 80 valves, 15-head aluminium screw capper, HMI renewed 2015 - Twist-off capper | Italmeccanica / Crown | S4BLH | - | Steam-heated, automatic cap feeding - Cooling tunnel | Tuchenhagen / Göbel | K1-135 | - | 7 cooling zones - Bottle dryer | Europool | - | 2007 | High-speed air dryer - Labelling machine | Krones | Starmatic | - | Cold glue labelling, Siemens S5 - Wrap-around packer | Kisters | 320/50 | 1999 | Tray and carton packaging, Nordson hot melt - Conveyors | KHS / Krones | - | - | Complete conveying system - Palletizer | KHS | LORD 1BSN2 | 1999 | Pre-grouping, pallet formats Düsseldorf/Euro/Industrial - Pallet labeller | Logopack | - | - | Pallet labelling system - Reverse osmosis system | MWT | - | - | Capacity 800 l/h