Used Paint Line for sale (12,221)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Working height: 900 mm Working width: 1,350 mm Belt changing side: left Workpiece thickness: 3 - 160 mm Frequency-controlled feed speed: 4 - 20 m/min Abrasive belt dimensions: 2,620 x 1,350–1,380 mm Adjustable sanding belt blowing device with 5 settings WRD WORKPIECE CLEANING ROTOR Workpiece cleaning system with 16 rotating nozzles MOBILE OPERATING TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM Upon activation, the machine automatically sets to a 10 mm workpiece thickness and activates the blowing rotors. After the feed belt is fully cleaned, the machine returns to its initial setting. AAT EXTRACTION DAMPER CONTROL Control of extraction dampers via the terminal (24 Volt DC, without extraction dampers included) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1-3 PCS Uninterruptible power supply for sanding belt oscillation in case of power failure System consists of: Guedpfeyw Ndmox Af Tea SANDTEQ W-700, PROFI SWB735/RRE – sanding from below Wide belt sanding machine with three sanding units for processing wood or wood-like workpiece surfaces Prepared to accept up to two auxiliary units, such as a cleaning brush, satinizing or structuring brush, and rotating cleaning nozzles. Units: I. R UNIT Sanding unit with automatically adjusting contact roller Profiled steel roller, 240 mm diameter With grain compensation Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation II. R UNIT Sanding unit with automatically adjusting contact roller Rubber-coated roller, 240 mm diameter Rubber hardness: 85° Shore With grain compensation Drive motor: 30 kW Abrasive belt speed: 18 m/s III. E UNIT Sanding unit for installing a pressure beam - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation - Protected storage area on the machine for additional sanding inserts Drive motor: 22 kW Abrasive belt speed: 2 – 18 m/s Torque-dependent standby operation to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BEAM - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the leading and trailing edges - Various sanding inserts, 80 mm wide, with different felt hardnesses Machine dimensions (L x W x H): 3,900 x 2,100 x 2,000 mm Machine weight: approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – sanding from above Wide belt sander with three sanding units for machining wood or wood-based workpiece surfaces Units as above, additionally: FBM FINISHING BRUSH Brush unit with finishing brush Bristles: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions (L x W x H): 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight: approx. 6,500 kg

Condition: new, Year of construction: 2025, functionality: fully functional, NEW Equipment for feeding defrosted fish raw materials to the blanching area Equipment for blanching fish raw materials - Provide mechanized or manual delivery of fish raw materials (arranged in one or more layers) to the heat treatment area; · Provide heat treatment (blanching) liquid of fish raw materials (a mixture of water, salt water, water vinegar) or in a steam environment; · The speed of the blanching conveyor is variable; · The blanching temperature is adjustable (50-100 C) and constant maintainable; · Impact insulation provided in the blanching area to prevent heat loss; · Ensure continuous supply of thermally processed fish raw materials and packaging area; · Provide water or steam connections and the possibility of draining overflow liquid or condensate and blanching liquid directly into the sewage system; Blanching power 600 kg per hour Equipment for dosing fish raw materials in cans and packing cans - Equipment, (can dispenser for Hansa cans type), which provides a can sequential feeding to the raw material dosing area. Speed ​​min. 75 up to 90 cans/min. · Equipment that provides semi-automatic dosing of blanched fish raw materials in cans: manual placement of raw materials in the portioning area, mechanized portioning and mechanized dosing of the fish portion in a box. The operating speed of the line must be matched with the operating speed of the cans dispenser. Permissible deviation +- 4 grams Equipment for the accumulation of filled cans, which allows the accumulation of at least 2 min of packing capacity, min 150 cans; · Equipment that provides continuous weighing of cans with the possibility of diverting cans that are below the permissible deviation of the specified weight to the forgiving conveyor, and ensures the return of cans to the flow after the forgiving; · The equipment is easy to service and sanitary. · Number of employees servicing the equipment: 4 employees Automatic control unit - Provides automated equipment control and the ability to adjust the speed of equipment operation. Equipment: You can send separate parts if needed. 1- Fillet conveyor – 1pcs 2- Blanching conveyor line – 1pcs 3- Fillet dosing machine – 1pcs 4- Checkweigher – 2pcs 5- Can dispensing machine – 2pcs Gedpfx Afjv Dftxe Teua 6- Rotary table – 1 pcs 7- Conveyor line – 8pcs Uses The line is designed for blanched fish fillets. Automatic filling of blanched fish fillets into "Hansa" type cans and weight control with feeding to the capping machine.

Condition: good (used), Year of construction: 2013, Grinding wheel 400 x 203 mm Regulating wheel 225 x 127 mm Fire extinguishing system Kraft u. Bauer Guedpfxjyxl Dre Af Toa Knoll microfilter Steuli lifting station

Condition: used, mileage: 32 km, power: 96 kW (130.52 HP), first registration: 04/2023, fuel type: diesel, overall weight: 2,940 kg, color: black, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,531 mm, total width: 2,474 mm, total height: 2,499 mm, loading space length: 2,900 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal number: 88207 Errors and prior sale excepted! ---- SPECIAL EQUIPMENT * Airbag (passenger side) * Exterior mirrors, electrically adjustable, heated and foldable - with integrated turn signals * Radio: Ford audio system with 4-inch multifunction display - Connected Radio - DAB/DAB+ - FordPass Connect - 4 speakers, antenna - Integrated control panel and steering wheel audio remote control - Bluetooth, USB port, and hands-free system - Emergency call assistant Gujdpfex I T Rxox Af Toa * Seat Package 15: Driver’s seat, 4-way adjustable - Double passenger seat with storage compartment under individually folding seat cushions - Height-adjustable headrests - Fold-out table integrated into double passenger seat - Heated seats for driver and passenger - Inner armrest for driver - Manual lumbar support (driver's seat) - Seat cover: fabric * Technology Package 10: Heated windscreen - Rain sensor wipers - Front and rear parking pilot system - Active emergency braking assistant (camera-based) - Lane keeping assist with fatigue warning and high-beam assistant, additionally with lane keeping system - Headlight assistant with day/night sensor - Cruise control - Rear view camera with image display on multifunction display - LED downlight - Fog lights * Würth conversion: steel module block - vehicle floor panel - side wall lining ADDITIONAL EQUIPMENT * 1 battery * Driver’s airbag * Anti-lock braking system with electronic brake force distribution incl. ESP with traction control - Hill start assist - Crosswind assist - Emergency braking assistant - Rollover protection - Emergency brake support incl. emergency brake light * Battery: battery runtime, programmable for 10 min * On-board computer with consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECO mode * Rear double-wing doors with 180° opening angle (without window) * Front power windows with quick down/up function for driver's side * Ford Easy Fuel * High-capacity alternator * Lockable glove compartment * Interior lighting with delay function and front reading lights * Front air conditioning incl. dust and pollen filter * 70 l fuel tank * Cargo area lighting * Steering wheel: synthetic leather steering wheel * Steering column adjustable for height and reach * MyKey key system * Emergency call assistant * Particulate filter: diesel particulate filter * Wheels: wheel trims * Wheels: tire repair kit * Wheels: steel rims 6.5 J x 15 * Headlights: halogen dipped headlights with daytime running lights * Sliding door entry light, automatic when door is opened * Sliding door, right * Rear mud flaps * Side protection strips * Power steering * Seat belts - Pre-tensioners and force limiters for front seat belts * Start-stop system * Rear bumper with integrated step * Partition wall (plastic) at B-pillar height * Air recirculation function * Lashing eyes * Immobilizer * Heat-insulating, lightly tinted windows * Central locking with remote control * Second remote control key * Overhead storage compartment at the front ... and much more.----1st owner. German specification. Errors and prior sale excepted. 2 years factory warranty from initial registration (extendable on request). We are happy to accept your vehicle in trade-in. Financing/leasing available with zero down payment! Do you have any questions? We are happy to advise you! Despite existing checks, a deviation of the vehicle from the above

Condition: used, mileage: 63 km, power: 81 kW (110.13 HP), first registration: 06/2024, fuel type: diesel, overall weight: 2,825 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal 66035 ---- Subject to errors and prior sale! SPECIAL EQUIPMENT - Airbag (passenger side) - Package: Technology package 5 exterior mirrors with indicators, adjustable, heated and folding audio system, 13 multifunction display, Ford SYNC 4 including navigation. Blind spot assist including CTA reversing emergency braking assist. Pre-Collision Assist, camera and radar based Fatigue warning, wrong-way driver warning, left lane keeping and lane change assist. Traffic sign recognition. Parking system Front/rear cruise control, ad. Intelligent speed limiter, reversing camera. Steering wheel, Sensico in leather look and ESP - Radio: Ford audio system with 13 multifunction display and Ford SYNC 4 including navigation - Digital radio reception DAB/DAB+ (Digital Audio Broadcasting) - 13 TFT multifunction display - Integrated control panel and audio remote control on the steering wheel - Ford SYNC 4 with AppLink and touchscreen - AppLink - Amazon Alexa Built-in voice assistant OTHER EQUIPMENT - 2-stage unlocking for passenger compartment - 6-speed gearbox - Electronic ABS with EBD - Driver's side airbag - Electrically adjustable outside mirrors and - Outside mirror housing made of plastic, black - Battery: H7 AGM single battery - On-board computer - Flat roof - Roof console - Double-wing rear door/180° (without window) - Tachometer - Third brake light - Electronic safety and stability - Electric front windows - Electronic parking brake - FordPass Connect - Heated windscreen - Floor mats: Rubber floor mats at the front - Grab handle, driver and passenger side - Lockable glove compartment with lid - Interior lighting at the front - Automatic air conditioning at the front - Headrests (3) - Fuel tank 55 l - Cargo area lighting (LED) - Steering wheel: Plastic steering wheel - Small center console - Emergency call assistant - Package: Technology package 2 (Trend) - Ford audio system with 13?? Multifunction display and Ford SYNC 4 - Pre-Collision Assist, camera-based - Fatigue warning - Traffic sign recognition system - Wrong-way driver warning function - Lane assistant including lane keeping assistant - Parking pilot system front and rear - Cruise control - Intelligent speed limiter with speed limit display - Rear view camera - Particle filter: diesel particle filter - Radio accessories: 4 speakers - Wheel covers - Tire repair kit - Tire pressure monitoring system - Wheels: steel 6.5 J x 16 m.215/65 R16 R - Windscreen wiper with rain sensor - Headlights with LED dipped beam - Sliding door: sliding door, right - Mud flaps at the rear - Mud flaps at the front - Power steering - Seat belts - Seats: Seat package 6A - Start-stop system - Ford Power start function - Bumpers mostly in vehicle color, partly - Partition wall (metal) without window - Plastic door handles, black-gray - Door hinges, 90 degrees - Recirculating air heating Guodpfjtr Srljx Af Tsa - Lashing eyes 6 - Immobilizer - Heat-insulating glazing, slightly tinted - Central locking with remote control ... and much more ---- 1st hand. German version. Subject to errors and prior sale. 2-year factory warranty from registration (can be extended on request). We are happy to accept your vehicle as part payment. Financing/leasing also possible without a deposit! Do you have any questions? We are happy to advise you! Since, despite existing checks, a deviation of the vehicle from the above description cannot be ruled out, we would like to point out that the vehicle description is only for general identification o

Year of construction: 2015, operating hours: 1,378 h, condition: like new (used), Brand: COLLIN Lab & Pilot Solutions GmbH Type: ZK 25 compounding line Serial no.: 5251-38-15 Year of manufacture: 2015 Operating hours: 1,378 Screw diameter: 25 mm Screw L/D ratio: 48 Connected load: 36 kW Dimensions (LxWxH): 5,000 x 1,200 x 2,200 mm Weight: 1,350 kg Godpfxjyzp Sxs Af Tjua Line configuration: – 2x Gravimetric feeding systems from Coperion – 1x Side feeding with two possible placements – 2x Liquid dosing units – 1x Vent port for degassing, including vacuum pump – Filament die with 1 cavity – Filament die with 4 cavities – FECON system for process data monitoring – Silicone conveyor belt with active air cooling – Pelletizer with adjustable speed Other: All documentation available in German. Other languages upon request.

Condition: excellent (used), EWAG EWAMATIC LINE is a CNC tool and cutter grinder offering precision, high accuracy and reliability. 6 axes (X360×Y240×Z240 mm; B ±135°). 6 spindles, 7.5 kW spindle, 16 kVA, feeds 10 m/min, 3x400 V 50Hz, air 6 bar; weight ~4000 kg; 3400×2200×2500 mm. Equipment: Tool setter Renishaw, redressing device, oil mist extractor, loading robot Fanuc LR Mate 200iC, fire extinguishing system. Achieves tight tolerances; suited to automotive, aerospace, medical and watchmaking. Gedpfx Afeyxnzmj Toua

Condition: ready for operation (used), Year of construction: 2003, operating hours: 2,500 h, functionality: fully functional, For sale: Complete TECMAT poultry slaughter line, sourced from a poultry abattoir. Features: - Capacity: 300 to 500 birds/hour - Overhead conveyor with stainless steel hooks - Rail length: 40 meters - Plucker included - Scalding tank with heating system - 3 troughs - Functional drive motor - Complete electrical control panel - Refrigeration unit - Stainless steel structure and accessories ✔ Complete line ✔ Professional equipment ✔ Disassembled and in storage ✔ Photos available prior to dismantling Ideal for: - Setting up a poultry abattoir - Short supply chain agricultural projects Guodpox Rrtkofx Af Tja - Upgrading a processing facility - Export Equipment available immediately. 💰 Price: €20,000 Photos and further information upon request.

Year of construction: 2010, condition: good (used), Parts shown by hand not come. Machine is fully functional. Guedpfxsyr N Tvs Af Toa

Condition: good (used), Complette line for ravioli production. Guodpfeub Diusx Af Tja

Condition: good (used), Machine used for pasteurization vegetables. Guodperwn Hbjfx Af Toa

Condition: used, Year of construction: 2004, functionality: fully functional, type of input current: three-phase, total width: 1,800 mm, total length: 16,500 mm, input voltage: 400 V, input current: 10 A, 21 C – GERBER Spreader SY 101 Fabric Spreading System – Complete Cutting Room Line Description For sale is a GERBER Spreader SY 101 industrial fabric spreading system, including the spreading unit and full table infrastructure. This system is designed for efficient and precise spreading of fabric layers across long cutting tables in high-volume garment production. It ensures consistent material handling, accurate layer control, and significantly improves cutting room productivity. The system has been operated as part of a complete production line together with a Gerber automatic fabric loader (unit 31 C) and a Lectra VT-FA-MH-71 CNC cutting system (unit 29 C). This setup enables a continuous workflow from roll loading to spreading and cutting, reducing manual labor and increasing overall throughput. The machine was used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video recorded in operation on 05.03.2026. Includes • GERBER Spreader SY 101 • Rail-mounted motorized drive system • Integrated control panel • Full-length spreading tables (approx. 16.5 m) • Fabric roll holder system • Conveyor-based / air flotation table structure • Integration capability with loader and cutter systems Technical Specifications • Manufacturer: Gerber Technology • Model: SY 101 • Type: Fabric spreading system • Application: Cutting room / spreading line Capacity • Max roll width: approx. 1800 mm • Max roll weight: approx. 100 kg • Max roll diameter: approx. 500 mm • Max lay height: approx. 230 mm Performance • Max spreading speed: up to 100 m/min • Length accuracy: ±2 mm Electrical • Voltage: 230 V / 400 V, 50/60 Hz • Power: approx. 2.5 kW • Compressed air: approx. 6 bar System Features • Air flotation table for low-friction material handling • Tension-free fabric feeding system • Precise length control for minimal material waste • Compatible with automated loaders and CNC cutting systems Advantages • High-precision spreading reduces material waste Gedpfx Afsy Avqde Toua • Continuous production flow • Reduced manual handling • Suitable for denim, workwear, and technical textiles • Modular system adaptable to different layouts Condition Used industrial condition Operational prior to shutdown Typical signs of industrial use Inspection possible prior to dismantling Sold as-is, where-is, without warranty Location Valga, Estonia Removal & Transport Buyer responsible for dismantling and transport Professional dismantling recommended

Condition: good (used), Year of construction: 2001, In good technical condition and fully operational. Manufacturer: Rollsett Machine Oy Finland. Year of manufacture: 2001. Profile height: 18 mm. Entry width: 1,250 mm. Overall width: 1,146 mm; 1,166 mm. Construction width: 1,100 mm. Min./max. length: 0.5 lm/8 lm at a thickness of 0.50 mm. Accessories, aids: screws, sealing tapes, profiled seals, anti-condensation treatment, light profiles. Gedpjx Tf Itofx Af Toua

Condition: good (used), In good technical condition and fully operational. Manufacturer: Bud Masz M. Stachlewski Steel thickness – 0.5-1 mm. Profile height: 40 mm. Entry width: 1250 mm. Overall width: 944 mm. Gujdpfxsx Tf Hce Af Toa Effective width: 915 mm. Min./max. length at a thickness of 0.5 lm/12 lm starting from a thickness of 0.75 mm Accessories, auxiliaries: screws, sealing tapes, profiled gaskets, anti-condensation treatment, light-transmitting profiles

Condition: used, machine/vehicle number: 006619, Position 1: Panel Feeding and Loading IMA + MEINERT-COMBIMA/I/R75/2050 Position 2: Double Squaring Machines IMA + MEINERT-COMBIMA/I/R75/2050 Position 3: Panel Turning Device IMA + MEINERT-COMBIMA/I/R75/2050 Position 4: Single Edgebanders IMA + MEINERT-COMBIMA/I/R75/2050 Position 5: Roller Conveyors IMA + MEINERT-COMBIMA/I/R75/2050 Position 6: Single Edgebanders IMA + MEINERT-COMBIMA/I/R75/2050 Position 7: Panel Turning Device IMA + MEINERT-COMBIMA/I/R75/2050 Godpfx Afoqy Em No Tjua Position 8: Panel Stacking and Offloading IMA + MEINERT-COMBIMA/I/R75/2050

Condition: used, Year of construction: 1992, functionality: limited functionality, Paint booth as shown in the pictures for sale, including crane runway as visible in the images. If dismantled by the buyer, price is negotiable. Gjdpfsy Aldaox Af Tjua

Year of construction: 2018, operating hours: 100 h, condition: as good as new (ex-display), Klieverik laminating calender with few operating hours. Approx. 100h. Guodpfx Afehd N Dae Tea The machine can be inspected on site. Condition as new. The machine has never been in serial production. Sale from place.

Condition: new, - Mobile design - high degree of separation, high extraction performance - easy to handle - long filter service life, therefore little downtime - more flexible thanks to extraction technology with front plate system - certified for ATEX Zone 2 Gedpfx Afju T Hrps Tsua ----- Technical data ----- Air output: 4,600 m³/h, usable pressure: 500 Pa, Filter area with pre- and fine filter: 1 m², Connection Ø: 300 mm, Motor 400 V: 1.5 kW, motor speed: 1,410 rpm, Dimensions (LxWxH) open: 1,897 x 1,405 x 1,144 mm, Dimensions (LxWxH) closed: 1,012 x 1,405 x 912 mm, Weight: 175 kg + 5 m cable with plug and throttle valve

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, suction capacity: 3,900 m³/h, input voltage: 400 V, power: 1.5 kW (2.04 HP), Equipment: cabin, documentation/manual, emergency stop, lighting, dimensions without fan and control panel! Work area - dimensions (mm): 990(w)x800(d)x1100(h) Overall dimension(mm): 1100(w)x1900h)x1100(h) Technical data: - Fan power 1.5kW (ATEX) - Fan suction capacity: 4100 m³/h (max 750Pa) Guedpfxjia Tabe Af Toa - Lighting: 1pc 2x18W (ATEX) - Connection voltage: 230V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 20082, type of input current: three-phase, total width: 2,000 mm, total length: 6,700 mm, input voltage: 400 V, input current: 10 A, 32 C – GERBER XLS-125-180-L Automatic Fabric Spreader – Industrial Spreading System Description For sale is a GERBER XLS-125-180-L automatic fabric spreading machine designed for high-volume textile and garment production. This industrial spreading system enables precise and efficient multi-layer fabric spreading directly onto a conveyor table. The motorized spreading carriage ensures consistent material handling, alignment, and production speed, making it suitable for demanding production environments. The machine is known as a reliable industry workhorse, capable of handling a wide range of materials from heavy denim to lightweight fabrics. The system has been operated as part of a fully integrated cutting line together with a Lectra Vectorfashion VT-FA-Q2-72 cutter (unit 35 C) and FINN-CONVEY V307 conveyor system (unit 30 C). This setup significantly improves production flow, reduces manual labor, and enables continuous high-volume operation. The machine has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video available from operation (05.03.2026). The video material shows the GERBER spreading system in operation together with other cutting line equipment, including a Lectra Vectorfashion VT-FA-Q2-72 CNC cutter (unit 35 C) and a FINN-CONVEY V307 conveyor system (unit 30 C). Includes • GERBER XLS automatic spreading machine • Motorized spreading carriage • Roll holder system • Integrated touchscreen control panel • Fabric alignment and feeding system • Mounted rail system for table operation Technical Details • Manufacturer: Gerber Technology • Model: XLS-125-180-L • Year: 2009 • Serial number: 20082 • Max roll weight: 125 kg • Max roll diameter: approx. 600–650 mm • Machine weight: approx. 400 kg • Spreading width: up to 1800 mm • Speed: up to approx. 100 m/min (material dependent) • Voltage: 3 x 380–415 V • Frequency: 50/60 Hz Gedpfjy Alciex Af Teua • Current: approx. 10 A Key Features • Fully automated fabric spreading for reduced manual labor • Suitable for both rolled and folded fabrics • Precision tension control to prevent fabric distortion • Accurate edge alignment for material optimization • Touchscreen interface for easy programming and control • Integrated safety systems including emergency stop and sensors Production Advantages • High precision reduces material waste • Fast spreading significantly improves cutting room throughput • Consistent tension ensures dimensional stability of cut parts • Enables efficient multi-layer cutting preparation Maintenance & Reliability Gerber spreading systems are known for strong spare part availability and long service life. Condition Used industrial condition Fully operational prior to shutdown Recently serviced (27.02.2026) Video available from operation (05.03.2026) Typical signs of use from production environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Typical Applications • Automatic fabric spreading • Multi-layer cutting preparation • Denim and heavy fabric production • High-volume garment manufacturing • Cutting room operations Location Valga, Estonia Removal & Transport Buyer responsible for dismantling and transport Professional dismantling recommended due to system size

Year of construction: 2018, condition: ready for operation (used), An optical inspection machine Göpel for the inspection of THT components, THT solder joints and wave-soldered SMD components is available. Component clearance: 120mm, max. component height top/bottom: 80mm/10mm, max. inspection dimensions X/Y: 540mm/450mm, max. workpiece dimensions X/Y: 620mm/510mm, inspection speed: approx. 100cm²/s, machine dimensions X/Y/Z: approx. 1200mm/1400mm/1800mm, weight: approx. 900kg. Documentation available. An on-site inspection is possible. Guedpfjy Aaflox Af Tsa

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Storage location: Garbsen Godpfx Asvvizkof Toua

Condition: used, *Available from approx. end of 2025* Fully automatic finger jointing line for the following dimensions: Thickness: approx. 24 – 100 mm Width: approx. 80 – 240 mm Finger jointing length: 400 – 1,500 mm Finished length: 2.50 m – 13.50 m continuously variable Consisting of the following system components: - SMB vacuum destacking lengthwise with 2 lifting tables and 2 package roller conveyors, built in 2013 Package dimensions max. 1.20 x 1.20 x 6.00 m 4 suction pads Sicko system Separation and infeed into roller conveyor for scanner feeding, board turner, switch for too moist, too dry, switch for B-quality, marking station or automatic operation - Bidac end-face scanner for cupping detection, built in 2013 - Brookhuis moisture measurement FMI 5 Year of manufacture 2019 - Microtec scanner Goldeneye 502, year of manufacture 2012 with X-ray, 4 color cameras and new optimization software - Dimter-Opticut 350-2, year of manufacture 2003 with paddle ejector, year of manufacture 2009 and associated sorting belts and pneumatic ejector for 2 additional qualities - NKT packaging - NKT finger jointing system with turntable Spezialpack AH 1050, year of manufacture 2005 consisting of: Milling machine · Tipping station · Threading section length 5.0 m · Cyclic press length 6.00 m · Cross-cut saw - SMB stacking machine, year of manufacture 1998, 2.50 - 13.50 m length, divisible into 2 units (e.g. 2 x 5.0 m) 8 stacking arms, 8 stacking tongues, manually adjustable electro/hydraulic stop, package width: max. 1200 mm, package height: max. 600 mm, hydraulic package pusher Gedovvi Tyjpfx Af Tsua Storage location: Customer

Year of construction: 1987, condition: used, machine/vehicle number: 29990, Volume flow: 300 cm³ Overpressure: 231 bar Max. volume flow at 25 DH/min: 7.5 l/min Inlet overpressure or required air pressure: 7 bar Air consumption: 9,7 l/DH Weight: 100 kg Gujdpobnpc Uofx Af Toa Space requirement: 1250 x 750 x 1400 mm

Condition: new, Year of construction: 2026, Packaging line for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, baby wipes, disinfecting wipes. The production process includes unwinding of the nonwoven from the jumbo roll, slitting for a 2-lane production process (until packaging), dipping into liquid, longitudinal folding in Z- or W-fold, cross cutting (tissue length), 1 x cross folding, stacking, continue to packaging unit which handles film feeding and wrapping wet wipes, punching the hole (to open the pack), positioning of reclosable label, bag cutting/heat sealing. Integrated splice units increase efficiency during material, film and label role changeover. - Specifications: suitable for dry nonwovens (airlaid, spunlaid); folds: Z or W shape (change of folding tool necessary); fold face adjustable per side; dimensions of folded tissue: L(70-100)xW(40-100) mm; dimensions of unfolded tissue: L(140-200)xW(140-200) mm; number of wet wipes per pack (min. to max.): 5-30 pieces; grammage wet wipe: 35-80g/m²; speed of the machine in neutral: max. 900 wipes/minute or max. 90 packs/minute; bag size: depending on folding dimensions and number of wipes per pack; film roll dimensions: width max. 280 mm, diameter: max. 400 mm; suitable films: OPP film (transparent, printed or laminated); nonwoven jumbo roll dimensions: width 280-400 mm, diameter max. 1200 mm; label roll dimensions: width max. 60 mm, diameter max. 300 mm; power: 25kW, 380V; machine dimensions: L8500xW1520xH2350 mm; weight: 5000kg. Godpfsv Nma Rjx Af Toua Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.