Used Paternoster for sale (174)

Condition: good (used), Storage paternoster, Kardex, approx. 5.96 m high, 250 kg / carrier – used - : Price ex-works: €14,950 (net), disassembled, packed and loaded, plus transport and reassembly! Dcodpfxjwt Sflo Ackeh Manufacturer: Bellheimer Kardex Model: IND-250-4010.5 Device number: 116/24464 Year of manufacture: unknown, prior to 2000 Device height: approx. 5.96 m Device width: approx. 3.01 m Device depth: approx. 1.24 m + 0.30 m for the worktop = total 1.54 m Number of carriers: 40 units Carrier dimensions: Width: approx. 2.48 m Height: approx. 23 cm Depth: approx. 41 cm Max. load per carrier: 250 kg Permissible total load: 10,000 kg Dead weight: 1,000 kg Carrier selection by carrier number no longer functional – device must be operated via up/down button. Condition: good Available: immediately Location: 45481 Mülheim a.d. Ruhr

Condition: good (used), Year of construction: 1995, Lifting system, Kardex, tray size: 1250x825mm, 7m high – used - : Price ex location: €13,950 (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Bellheimer / Kardex Type: Shuttle 1250x825x10000 Device number: 95.008812/001 Year of manufacture: 1995 Tray size: 1250x825mm Dcjdpfsyrqvfox Ackoh Device height: approx. 7m Depth: approx. 2.70m Width: approx. 1.6m Number of trays: 44 units Permissible total payload: 2x10,000kg Permissible shelf load: 250kg 3x400V, Current: 3x5.2, Power: 3.6 kW Condition: used Available: from approx. week 13/2026 Location: Speyer

Condition: good (used), Year of construction: 2007, Lift System, Megamat FSE 7.1, approx. 6.91m high, min. 331kg per tray, Tray size: approx. 3.06m x 81cm – used - : Price ex location: €18,500 (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Megamat Model: FSE 7.1 3060/816-6910 Serial number: 500002536 Dodpfox Rzb Dox Ackjch Year of manufacture: 2008 Permissible total load: 70,000kg Load capacity per tray: min. 331kg (possibly 414kg or 536kg, depending on which type of tray is installed; this cannot be clarified in advance). Number of trays: approx. 50 pieces Tray size: 3060 x 816mm Equipment dimensions: Width: pending (should be approx. 3,450mm) Depth: pending (should be approx. 3,200mm) Height: approx. 6.91m 3/N/PE 230/400V, rated operating current 17.8A, mains fuse: 25A Condition: good Available: approx. end of May / beginning of June 2026 Location: 09337 Hohenstein-Ernstthal

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, total height: 6,000 mm, total width: 1,750 mm, total length: 2,820 mm, load capacity per storage section: 500 kg, construction width: 1,300 mm, warranty duration: 12 months, – Tabular control panel with item management – Unit comes from a lift system – Side lift shaft cladding reproduced – 2 units available – 1300x825mm tabular panel, 500kg payload each Dcjdpfozaqibsx Ackeh

Year of construction: 2015, condition: used, workpiece length 1.500 - 6.000 mm work piece width 50 - 200 mm workpiece height 20 - 100 mm Dedpfeyz Df Tox Ackjch Max. Layer weight 450 kg Max. Stack size 6 x 1,2 x 1,35 m Paternoster stacking system, destacking or outfeed mechanization Sicko type X-Stacker for automatic stacking of workpieces after planing systems. The system is designed for a continuous material flow and enables the formation of layers and bundles in several fixed lengths. Ideal for the efficient stacking of wooden workpieces. The system consists of an infeed roller conveyor after the planing machine with a length of 10.3 m, the stacking unit and a roller conveyor (buffer section) after stacking with a length of 7 m. Technical details on request. Also available is the complete planing line, the planing machine or the Weinig High-Mech loading magazine.

Condition: good (used), Year of construction: 2005, functionality: fully functional, total height: 6,000 mm, total width: 2,777 mm, total length: 3,112 mm, load capacity per storage section: 500 kg, construction height: 5,650 mm, input voltage: 380 V, empty load weight: 3,000 kg, warranty duration: 3 months, Equipment: documentation/manual, safety light barrier, 3 SHUTTLES (4 machines collées, ZUSAMMEN, IN ONE ROW) KArdex shuttle lift XP 500-2450x864 Dcjdpey Ux D Djfx Ackjh around 40 trays per machine for 500kg capacity of charge dimension of tray 2450mm x 864mm space per tray adapatable between 100mm and 700mm managable through a software hight 2 shuttle of 6000mm and & shuttle 5650mm) same width 2777m, same depth 3112mm dissammbled and ready to load Automatisches Lager Gebraucht Lagersystem

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total height: 3,900 mm, load capacity per storage section: 400 kg, Manufacturer: HÄNEL Model: Lean Lift Shelf dimensions: 3260/825mm Number of shelves: 25 Load capacity per shelf: 400 kg Rack height: 3.90m Year of manufacture: 2016 Operating hours (number of cycles): 22100 Dcjdpfxoy Dgkks Ackoh Maximum storage capacity: 40,000 kg Control system: MP 12N-S Hänel The rack is in excellent condition with minimal signs of wear. This machine is highly recommended. We can arrange transportation and installation after purchase.

Condition: good (used), Lifting system, Megamat, 170 kg / tray, approx. 6 m high, – used - : Price ex location: €14,500 (net), plus dismantling, etc. Manufacturer: Megamat Model: Megalift 14448/25/6010 Year of manufacture: 2000 Max. load capacity per tray: 170 kg Max. total load capacity: 18,000 kg Dimensions per tray: approx. 2.45 m x approx. 0.80 m Number of trays: approx. 40 units Machine dimensions: Height: approx. 6.01 m Width: 2.76 m Depth: approx. 2.70 m 3/N/PE 230/400V 10A, fuse 16A Condition: good Dcodpfx Aceyhxkmjkjh Availability: immediately Location: BG-8800 Sliven

Condition: excellent (used), Year of construction: 2022, Four Kardex Shuttle XP 500 units from 2022 for sale. Since installation, the machines have been regularly maintained by the manufacturer and are in very good condition. These Vertical Lift Modules are equipped with trays measuring 4,050 mm wide and 813 mm deep. This is Kardex’s widest standard model, offering ample storage capacity while keeping the footprint to a minimum. The machines stand 4,950 mm tall, making them ideal for use in facilities with lower ceiling heights that still require increased storage capacity. Each tray provides approximately 3.3 m² of storage space. With about 35 trays per machine, each unit delivers around 115 m² of storage. Combined, the four machines offer approximately 460 m² of storage area, while occupying only 52 m² of floor space. Every tray supports up to 320 kg, giving each machine a total load capacity of up to 11,200 kg with 35 trays installed. If needed, additional trays can be added. All trays feature 75 mm high tray edges. The machines are in excellent condition and are ideally suited for companies looking to maximize storage capacity efficiently. Technical Information: Year of manufacture: 2022 Model: SHUTTLE-XP-500-4050x813 Machine height: 4,950 mm Djdpfxey R U Nzo Ackjch Machine width: 4,380 mm Machine depth: 2,972 mm Tray width: 4,050 mm Tray depth: 813 mm Number of trays: Approx. 35 per machine Maximum load per tray: 320 kg Electrical specification: 3/N/PE 400V, 23A

Condition: used, Year of construction: 2016, functionality: fully functional, total height: 3,200 mm, total width: 1,500 mm, total length: 1,500 mm, load capacity per storage section: 500 kg, empty load weight: 750 kg, DGUV certified until: 07/2026, We are offering this used Hoppe & Hardt ESL pro 0.5t-3500 stacker, manufactured in 2016. Dcedey Rqnyopfx Acksh • Hoppe & Hardt ESL pro 0.5t-3500 • Load capacity: 500 kg • Lifting height: 3,200 mm • Standard transport platform / flatbed platform • Year of manufacture/delivery: 2016 • Already disassembled If you have any questions or require further information, please feel free to send us a message or call us.

Condition: not inspected (used), Year of construction: 2016, functionality: unexamined, total height: 3,500 mm, total width: 1,900 mm, total length: 2,000 mm, load capacity per storage section: 1,000 kg, construction height: 4,725 mm, empty load weight: 1,300 kg, We are offering this Hoppe & Hardt ZSL1.0-3500 warehouse lift, manufactured in 2016. Manufacturer: Hoppe & Hardt • Model: ZSL1.0-3500 • Year of manufacture: 2016 • Condition: not inspected • Chain conveyor / two-column lift • Year of manufacture or delivery: 2016 • Load capacity: 1,000 kg • Lifting height: 3,500 mm Dcjdpfxey Rqhge Ackjh • Electro-mechanical • Includes lifting platform, access ramp and accessories • Already disassembled If you have any questions or require further information, please send us a message or call us.

Condition: good (used), Year of construction: 2004, Hänel Rotomat 400 Paternoster The Hänel Rotomat 400 is a vertical carousel storage system (paternoster) that operates on the "goods-to-user" principle; it is used for both industrial storage and as an office lift for archiving purposes. The system makes optimal use of available ceiling height to maximize storage capacity within a minimal footprint. Areas of Application The Hänel Rotomat 400 is used across various sectors: Industry: For storing tools, measuring instruments, electronic components, and small parts. Office & Administration: As an automated archiving system for hanging files or binders. Medical Sector: For the sterile storage of surgical instruments. Overall dimensions (L): 260 cm Overall dimensions (W): 130 cm Overall dimensions (H): 285 cm Permissible shelf load: 150 kg Power supply: 3~ N+PE 400V / 50Hz / 5.5 kW Year of manufacture: 2004 Enhance your Paternoster A carousel storage system is only as efficient as its internal layout. Our specially designed storage bins utilize every last millimeter of shelf space. Find the right dimensions for your system in our other auctions. "A complete solution: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Dcedpfx Asy Nxp Ajckjh Find more storage lifts—both new and used—in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 500003520, Please state your offer price. Sale only within Europe, including Turkey. Technical data as per attached handout. The machine is offered without packaging; any warranty or guarantee rights are excluded. Should you wish to dismantle the equipment yourself, please indicate this clearly in your offer. We do not guarantee the accuracy of the technical data, the completeness of tools and accessories, or compliance with all safety and environmental protection requirements as stated in accident prevention regulations. Dsdsyvrh Espfx Ackech

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 500003519, Please state your offer price. Sale only within Europe, including Turkey. Dedoyvrbfepfx Acksch Technical data as per attached handout. The machine is offered without packaging; any warranty or guarantee rights are excluded. Should you wish to dismantle the equipment yourself, please indicate this clearly in your offer. We do not guarantee the accuracy of the technical data, the completeness of tools and accessories, or compliance with all safety and environmental protection requirements as stated in accident prevention regulations.

Year of construction: 2025, condition: new, Silicone Membrane sheet for Membrane press, Silikon Membrane für Membranpressen ,Natural rubber Membran MEMBRANE for membrane presses - silicone or natural rubber Highest quality and suitable for every membrane press (foil and veneer presses). You can obtain our membranes cut to the required size or as rolls from us. In the field of 3D Thermoforming, we also offer presses, foil trimming solutions , film storage paternoster, and brushing machines! MEMBRANES for membrane presses Silicone and Natural rubber The highest quality silicone and natural rubber membranes for each type of membrane press (foil and veneer). POSSIBLITIES FOR DELIVERY: The membranes can be cut to you size or delivered in a 36m roll. SILICONE Type: SM1 -3mm Colour: milky translucent Surface: both sides smooth width (standard): 1700 or 1800 mm polymer type: Silicone hardness: 50° Shore thickness: 3 mm temperature range: min. -50°C/max.230°C SILICONE Type: SM1 -2mm Colour: milky translucent Surface: smooth width (standard): 1600/1800 mm polymer type: Silicone hardness: 45° +/- 3 Shore thickness: 2 mm temperature range: min. - 60 °C/max. +230°C Dodpfsff Agiox Ackoch NATURAL RUBBER Type: RM-2 Colour: grey Surface: smooth/smooth smooth/textured width (standard): 1700 and 2000 mm +/- 5mm rubber: Natural rubber hardness: 42°Shore thickness: 1,8, 2.5 and 4.0 temperature range: min. - 20 °/max. +130°C

Condition: excellent (used), Year of construction: 2012, One Modula Lift ML 50D for sale. The Vertical Lift Module has been regularly serviced by the manufacturer since it was installed and is in great condition. The trays have a width of 4,100 mm and a depth of 860 mm, providing 3.53 m² of storage space per tray. With 50 trays, the total storage area is 176.5 m². Each tray can hold up to 500 kg, giving a total capacity of 25,000 kg for all 50 trays. The Vertical Lift Module is located in a protected area with a mezzanine, which has helped keep the cladding and exterior in excellent condition. Specifications: Dsdpfx Aov Uxrvjcksch Manufacturer: Modula Year of Manufacture: 2012 Model: Modula Lift ML 50D Height: 6,200 mm Width (Vertical Lift Module / Tray): 4,500 mm / 4,100 mm Depth (Vertical Lift Module / Tray): 3.058 mm / 860 mm Number of Trays / Tray Height: About 50 trays / 120 mm high edge Maximum Weight per Tray: 500 kg Electronics: 400 V, 20 A

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, 2 units SSI Schäfer LogiMat-2425 from 2019 for sale. Very sparsely used and in as good as new condition. SSI Schaefer is one of the world's largest companies in warehouse automation and their Vertical Lift Module "LogiMat" has gained a lot of ground in the world in recent years. These 2 lifts come with a good height of 9 950 mm - if you have enough ceiling height in your warehouse or factory, it means the possibility of really compact storage on a small floor surface. If necessary, the machines can be lowered to the desired height. The trays have a width of 2 425 mm and can handle a load of 300 kg, the combination means that the vertical storage lifts also work for businesses with heavy goods. The VLM's come with the option "LogiTilt", a function where the shelf can tilt in the opening of the machine and thus improve the ergonomics for the picker. Dcodpfxey D St Rs Ackoh In addition to the tilt function, the lifts also come with a laser pointer. If the machines are connected to your ERP or WMS, the laser pointer can indicate which picking location goods should be picked from. The machines can be purchased separately or in pairs. Available with a delivery time of 4-6 weeks. Shipping and installation is additional. These vertical lifts are configured with 3 225 mm wide shelves but with slightly shallower shelves than standard, 625 mm, this is often appreciated by warehouse / factory staff for ergonomic reasons. Each shelf provides 2.02 m² of storage space and with 34 shelves per lift, this gives about 68.5 m² of storage space on a floor area of about 10 m² per machine. The Vertical Lift Modules are each equipped with a 17" touch display and without external software, the control panel can be used to manage shelves, handle user management, optimize shelf placement and monitor the weight of each shelf. The lifts can also be connected to a WMS/ERP if necessary. These objects come with the option "LogiGate"; doors in the opening that open/close when the elevator machines pick up/drop off shelves. This option reduces dust and dirt in the machine and lowers the noise level when the lift is running. The items can be purchased separately or in packages of 2 or 3. Available from the end of October 2023. Shipping and installation not included. Manufacturer: SSI Schäfer Manufacturing year :2019 Model: Logimat SLL 3225-625-6950/200 Height: 6 950 mm Width vertical lift module / tray: 3 735 mm / 3 225 mm Depth vertical lift module / tray: 2 712 mm / 625 mm Number of trays: 34 trays per unit Maximum weight per tray: 200 kg Electronics: 25 A, 400 V

Condition: new, The manufacturer Zambelli Metalltechnik GmbH & Co. KG is discontinuing support for all paternosters and storage lifts as of December 31, 2023. The company will no longer provide support or spare parts in the future. LTG Lagertechnik Gerschütz GmbH will continue to offer spare parts, modernization kits and support for these devices. Dcodpfxeiy Dw Hs Ackoh Please feel free to contact us at any time.

Condition: excellent (used), Year of construction: 2013, We have a Kardex Shuttle XP 250 Vertical Lift Module from 2013 available for sale. The machine is in very good condition. This specific model (Shuttle XP 250 3050X610) is equipped with lowered trays, providing improved access for operators to handle goods easily. This feature enhances workplace ergonomics, reduces physical strain, and contributes to a more efficient workflow. The unit is fitted with double access openings, allowing items to be loaded on one side while being picked from the other. One opening can be closed if required for operational flexibility. The Vertical Lift Module can be utilized with a position list function, which ensures precise location tracking of items within the system. This significantly speeds up picking processes and reduces picking errors. Please note that activating this function requires integration with an ERP or WMS system. Djdpfx Aeyz N Efsckjch Each tray supports a maximum load capacity of 245 kg, with a tray width of 3,050 mm—delivering substantial storage volume suitable for most business operations. Each tray offers an approximate storage area of 1.86 m². With 64 trays, each machine provides roughly 119.07 m² of storage capacity while occupying only 7.71 m² of floor space, making it exceptionally space-efficient. Technical Specifications: • Manufacturer: Kardex Remstar • Year of manufacture: 2013 • Model: SHUTTLE-XP-250-3050X610 • Height: 8,250 mm • Width (vertical lift module/tray): 3,380 mm / 3,050 mm • Depth (vertical lift module/tray): 2,321 mm / 610 mm • Number of trays: approx. 64 per unit • Maximum tray load: 245 kg • Electrical connection: 3/N/PE 400V, 17A

Condition: ready for operation (used), Year of construction: 2018, controller manufacturer: SIEMENS, controller model: SIVATIC HMI, This WEMHÖNER Variopress Basic 1000S was manufactured in 2018. Ideal for efficient laminating processes, this machine ensures consistent performance. Consider the opportunity to buy this WEMHÖNER Variopress Basic 1000S laminating press. Contact us for more information. Additional equipment • Including: 2 x paternoster magazines for film rolls Machine Benefits Dedpfex D Hy Ajx Ackech Technical Machine Benefits • Heating plate format (mm): 2850 x 1550 • Electric heating plate design: aluminum heating plate top • Total pressing force (kn): 2400 / chamber pressure max (bar): 6 / operating temperature max: 180 degrees celsius / batch or workpiece size max (mm): approx. 2460 x 1180 • Thermoplastic film in rolls, width of the film: approx. 1430 mm / thickness of the film (mm): approx. pressure chamber height (mm): max. Up to 180 • Connection values: installed power (kw): approx. 46 / required air pressure (bar): approx. 8

Condition: used, Year of construction: 2006, functionality: limited functionality, machine/vehicle number: 106196, planing height: 200 mm, spindle diameter: 90 mm, planing width: 300 mm, spindle speed (max.): 8,000 rpm, height adjustment type: electric, compressed air connection: 8 bar, number of spindles: 5, For sale is a planing line by Weinig, complete with associated mechanisation from Kallfass (before and after the planer). The planing line is currently no longer in daily production. The operator side (left) first spindle and its mounting are defective. Weinig Moulder: Weinig Powermat 2000XL (year 2006) with 5 spindles (Weinig Powerlock system) plus chamfering unit. "Set-up time savings!" Spindle arrangement: bottom, right, left, top, bottom. The bottom and top spindles are both equipped with a jointing device. Spindle motor ratings: bottom 23.5 kW / right 15 kW / left 15 kW / top 28.5 kW / bottom 28.5 kW. Spindle speed: 8,000 rpm. The feed has a 15 kW drive motor, providing feeding speeds from 6 to 60 m/min. Compressed air requirement: nominal pressure 8 bar, operating pressure 6 bar. Dcodpfx Acoyzibmoksh Workpiece dimensions for processing in the planing line: Shortest part: 2.00 m Longest part: 11.00 m (depending on mechanisation) Minimum thickness: 19 mm Maximum thickness: 200 mm Minimum width: 40 mm Maximum width: 300 mm Maximum profiling depth: 35 mm Feed rate: 6–60 m/min. Splitting is possible on the fifth lower spindle up to 60 mm height. Mechanisation: Kallfass "HmoK10000" year 2006 (operational/used) Before and after the planing line there is mechanisation by Kallfass. There is the option to buffer 2–3 packs before the unit, which must then be manually destacked before the infeed. Layer formation after the planer is performed by a paternoster unit with 3 adjustable walls. The maximum component length for this setup is 11.00 m. Price is quoted net ex works, without warranty. Complete disassembly is to be carried out by the buyer. A large inventory of cutterheads, spare parts, and various extraction components is available and can be purchased separately.

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 327.112, total height: 4,910 mm, total width: 3,270 mm, total length: 1,155 mm, load capacity per storage section: 127 kg, construction height: 4,910 mm, construction width: 3,270 mm, type of input current: three-phase, input voltage: 400 V, empty load weight: 2,972 kg, input frequency: 50 Hz, input current: 7 A, Hänel Rotomat 900 vertical carousel storage system, year 2010, in working order and currently in use. Removed only due to warehouse relocation. Ideal for high-density storage of small parts, jewellery, components, engineering stock, pharmaceuticals, archive items and order-picking applications. Manufacturer: Hänel Model: Rotomat 900 Year: 2010 Specification: 22 carriers Max load per carrier: 127 kg Max total load: 2,794 kg Carrier size: 2,838 mm wide x 416 mm deep Machine dimensions: 4,910 mm high x 3,270 mm wide x 1,155 mm deep Stainless work surface 400V 3-phase supply MP12N-S-TFT control system Dsdpfx Aceyu Rrxoksch Ethernet / webserver / barcode interface Condition: Machine is powered and can be seen operating Clean, well-kept unit from a jewellery business environment Sold only because of warehouse move Sale terms: Viewing available by appointment Buyer responsible for disconnection, dismantling, loading and transport Further photos / video of operation available on request

Condition: reconditioned (used), Modernized machine with new LTG control system StoreControl L. Control system expansion available as an option. Currently 5 (formerly 6) identical machines available. External Dimensions: Total height: 5,900 mm Dedpfx Aeg Dckuockjch Width: 1,580 mm Depth: 2,680 mm 30 carriers, each with a load capacity of 250 kg, in usable clear dimensions: Width = 1,250 mm Depth = 825 mm Height: 0 to 750 mm Total load capacity up to 20,000 kg Operation opening starts at 860 mm above finished floor level, with a height of 1,000 mm Color scheme: grey / dark grey, carriers are sendzimir-galvanized Surface cleaned, signs of use and minor deformations possible Performance data: Vertical drive: 1 x x.0 kW / 400 Volt Horizontal drive: 1 x 0.xx kW / 400 Volt Additional features: Manually operated lifting door Subject to errors, technical modifications, and deviations in details/photos. Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Condition: reconditioned (used), machine/vehicle number: 2022-015, Mechanically overhauled machine with new LTG-StoreControl L control system Control system upgrade available as an option External dimensions: Height 6,210 mm Width 2,780 mm Depth 2,908 mm 50 beams with a payload of 331 kg each Dcedpfx Ajd Rh Dwjckeh with clear usable dimensions: W = 2,448 mm D = 816 mm H from 50 to 720 mm Total machine load capacity up to 2 x 35,000 kg Start of the access opening 900 mm above the top floor, then 750 mm high Color: GRAY/ORANGE, beams are sendzimier-galvanized, surfaces cleaned, signs of wear and minor deformations possible Performance data: Vertical drive 1 x 5.2 kW / 400 volts Horizontal drive 1 x 0.75 kW / 400 Volt Subject to errors, technical changes, and deviations from the photos. Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Condition: reconditioned (used), Currently, 13 (formerly 17) identical machines are still available. Mechanically refurbished machine with new LTG control system StoreControl L. External dimensions: - Height: 8,450 mm (modification possible at extra cost) - Width: 2,805 mm - Depth: 2,810 mm 50 carriers, each with a load capacity of 250 kg Clear usable dimensions: - Width: 2,450 mm - Depth: 825 mm - Height: from 55 to 750 mm Total load capacity per machine up to 2 x 15,000 kg Operation opening begins at 890 mm above FFL (finished floor level), with a height of 875 mm Dodpfx Acon D A I Tskjch Colour: cream white / blue, carriers sendzimir galvanized, surfaces cleaned, traces of use possible Performance data: - Vertical drive: 1 x 5 kW / 400 Volt - Horizontal drive: 1 x 0.55 kW / 400 Volt Optional transport trolleys available Subject to errors, technical modifications, and variations from the photos. Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.