Used Pbt 25 for sale (14,535)

Condition: used, mileage: 33,000 km, power: 159 kW (216.18 HP), first registration: 12/1986, fuel type: diesel, empty load weight: 8,100 kg, maximum load weight: 5,400 kg, overall weight: 13,500 kg, tire size: 10R22.5, axle configuration: 4x4, wheelbase: 3,600 mm, color: red, driver cabin: other, gearing type: mechanical, emission class: none, suspension: steel, number of seats: 6, Equipment: all wheel drive, cabin, differential lock, fog lights, parking heater, trailer coupling, Vehicle location: Bovenden, Doka, 1x air seat, switch 5, power take-off, differential lock, fog lights, storage box, leaf suspension, towing device Wheelbase: 3600 mm Superstructure: TLF16/25 water tender with superstructure from Bachert, 2500l water tank & FP 16/8 built-in pump Superstructure length approx. 3700mm! Spare wheel available for an extra charge! Bodpok D Smbefx Acwown The sale to tradesmen or export is subject to 19% VAT! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Year of construction: 2021, condition: new, functionality: fully functional, machine/vehicle number: P210807601, 25 HL Central Inflating Membrane Press Bwsdszbm Rdepfx Acwen No. 1 “ATHENA 25” PNEUMATIC CENTRAL ELASTIC MEMBRANE PRESS • Tank capacity: 25 hl • Elastic tubular membrane made of natural rubber, suitable for food use, supported by supporting elements, 9 mm thick • Fully perforated stainless steel tank • Air compressor integrated into the press • Blower for rapid deflation of the membrane • Self-braking geared motor for tank rotation • 380 V three-phase power supply, 50 Hz; required power 4 kW • Rotation transmission achieved through a crown gear, pinion, and chain • Sliding door, pneumatically operated, for manual loading and unloading of the pomace • Axial load with stainless steel valve, diam. 150 mm, DIN connection • Fixed must collection tray with 50 mm DIN connection • Sliding central slide for draining the spent product • Two-door engine compartment cover • Internal conveyors for discharging the marc • Rear door for tank inspection and washing • Electrical panel with IP66 protection • Pushbutton for manual and emergency controls, equipped with a cable for movement around the press; the manual controls are electromechanical and not managed by a PLC, thus guaranteeing the ability to operate the press even in emergency situations • Automatic pressing cycles controlled by a PLC and a color touch-screen control panel. This system, easy to use and highly flexible, allows you to: o View the cycle parameters and the operating status of the press o Enter custom programs o Perform dedicated programs for apples and pomegranates o Phase jump options to accelerate the cycle or repeat pressing phases o Automatically manage the discharge of the spent product o Select the language of use from a menu • Main dimensions: length: 4 m; width: 1.65 m; height: 2.05 m; weight: 1,300 kg • Entirely constructed from high-quality AISI 304 stainless steel Pressing times: • Apples (chopped): 2 h - 4 h, depending on the required yield and the quality of the apples • Pomegranates: 1 h 30' • Fermented grapes: 50' • White grapes that are easy to process: 1 h 15' - 1 h 30' • White grapes that are difficult to process (Muscat type): 2 h - 2 h 30' * External tank washing system, with pressure nozzles * Tank level control system with float and pump control * STAINLESS STEEL AISI 304 LEG EXTENSION - 500 MM (GROUND CLEARANCE: 900 MM) PRODUCTION Load capacity Apples (chopped) 2,150 - 2,850 kg Pomegranates (peeled) 2,150 - 2,850 kg Whole grapes (door load) 1,700 – 2,100 kg Whole grapes (axial load) 2,400 – 3,000 kg Destemmed-crushed grapes 4,300 - 5,700 kg Fermented grapes (wine-making capacity) 100-125 hl

Condition: excellent (used), mileage: 225,633 km, power: 110 kW (149.56 HP), first registration: 05/2023, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, fuel tank capacity: 85 l, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 9, emission class: euro6, suspension: steel, number of seats: 2, total length: 6,970 mm, total width: 2,020 mm, total height: 2,620 mm, permissible axle load (axle 1): 1,860 kg, permissible axle load (axle 2): 2,250 kg, Year of construction: 2023, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, USB port, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, power assisted steering, sliding door, soot filter, tail-lift, traction control, General information Number of doors: 6 Registration number: VVH-18-L Technical information Number of cylinders: 4 Engine capacity: 1.950 cc Transmission Transmission: Mercedes, 9 gears, Automatic Axle configuration Tyre size: 235/65R16 Brakes: disc brakes Front axle: Max. axle load: 1860 kg; Steering; Tyre profile left: 70%; Tyre profile right: 70% Rear axle: Max. axle load: 2250 kg; Tyre profile left: 70%; Tyre profile right: 70% Weights Empty weight: 2.335 kg Carrying capacity: 1.165 kg GVW: 3.500 kg Functional Tail lift: BAR CARGOLIFT, tail lift, 600 kg Cooling: 25 °C to 25 °C Make of bodywork: KONVEKTA DOLPHIN Cooling engine: diesel and electric Wall thickness: 10 mm Maintenance, history and condition APK (MOT): New APK (MOT) upon delivery Technical condition: very good Visual appearance: very good Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - Adaptive Cruise Control - Climate control - Collision avoidance system - DAB Radio - Electric folding mirrors - Heated door mirrors - Immobilizer - Keyless Go - Lane assist - Leaf spring suspension - MBUX Audio - Multifunctional Steering Wheel - Multitemp - Particulate filter - Partition - Radio/Cd/Audio system - Rain Sensor - Reversing camera - Side Door Right = Remarks = Video : Bsdpfx Ajzakw Socwswn Neat and like-new condition Mercedes Sprinter 315 CDI refrigerated van Euro 6 L3H2 manufactured 2023 Konvekta Dolphin Multitemp -25/+25 degrees Celsius Cools, freezes, and heats GVW 3500 KG Multitemp with sliding and removable partition With B.A.R. brand tail lift 600 KG payload In very good condition 225,000 KM demonstrably dealer maintained

Condition: good (used), approx. 200 pcs. shelf dividers (free standing) for shelf racks type 2510, SSI Schäfer - second-hand - : Prices per piece ex location: 2.- € (net) disassembled, packed and loaded! Manufacturer: SSI Schaefer type: TRF 25 10 year of construction: unknown galvanized new price: approx. 5.-€ Condition: good Available: immediately Location: Warehouse Frankenberg (Saxony) Bwodpfx Askhd Uiecwon

Condition: used, Swing bending machine with additional segmented upper tool, gooseneck rail. Swing bending press brake FASTI type 2095-25-2.5, serial no. 94 295 004, year of manufacture 1994. Working length 2540 mm, max. sheet thickness 2.5 mm, upper beam stroke 380 mm, bending beam motor power 2.2 kW, power supply 400 Volt, 50 Hz. - NC control FASTImatic FM100 - one-piece sharp rail 135° - additional segmented upper tool, gooseneck rail - controlled backgauge - continuous stop rail - controlled bending angle via control - electric foot switches. Weight 3000 kg. In good condition. Bwsdpettc Uaefx Acwjn

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Bjdow Nklhopfx Acwjwn Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: ready for operation (used), Year of construction: 1979, Immediately available ex-location: Hydraulic high-speed press Lauffer Type EPT 25 Year of manufacture: 1979 Inspected according to UVV Press force 25 t Stroke 160 mm Installation height 320 mm Throat depth 230 mm Table 500 x 360 mm Bwsdezap Tljpfx Acwen Ram 250 x 210 mm Weight 2 t Drive power 7.5 kW Price: EUR 2,750 plus VAT, ex-location.

Condition: used, functionality: fully functional, machine/vehicle number: 515065G00537, Year of construction: 2012, operating hours: 5,350 h, load capacity: 2,500 kg, lifting height: 5,020 mm, free lift: 1,770 mm, fuel type: electric, mast type: triplex, construction height: 2,280 mm, fork carriage width: 980 mm, fork length: 1,200 mm, empty load weight: 4,940 kg, total length: 2,270 mm, drive type: Elektro, construction width: 1,200 mm, Electric 4-wheel forklift Chassis number: 515065G00537 Load center: 500 Fork width: 100 mm Fork thickness: 40 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Front tire size: 225/75-10 Front tire condition: 80 - 100% Rear tire type: Superelastic Bwodjy Scraepfx Acwon Rear tire size: 180/70-8 Rear tire condition: 80 - 100% Battery voltage: 80V Battery capacity: 620Ah Battery type: PzS Battery year of manufacture: 2017 Battery condition: 40 - 60% Side shifter, 3rd valve, front work light, heater, full cabin.

Condition: used, Year of construction: 1996, Overview  This Krones Lavatec KES-2-5-312/25-110 bottle washer was manufactured in 1996 and has an output of 29,000 bottles per hour. The machine has been modernized several times, including an S7 control system, caustic filtration with drum screen and pH value measurement for hot water 1. The machine will run until the end of January 2026 and can be inspected in person at any time until then. Technical details  Output: 29,000 bottles/hour Bottle diameter: 54 - 90 mm Bottle height: 180 - 340 mm Equipment & modernizations  Plastic cell with 110 pitch Suitable for swing-top bottles Bottle diameter: 54 - 90 mm Bottle height: 180 - 340 mm Modernizations: Retrofitted S7 control system Drum screen for caustic filtration Railing on the machine Hanger-specific caustic spraying in the deflector Cleaning & heating system: Rental rotating spraying Heating with tube bundle exchanger and hot water Lye concentration measurement and dosing control, also for post-caustic pH value measurement for hot water 1 Soaking & rinsing system: Double pre-soak with sieve belt Lye volume: 30 m³ Caustic solution, hot water 1, hot water 2, cold water and fresh water Head section can be steamed and rinsed with disinfection H₂ suction Bwjdovxtavspfx Acwsn

Condition: used, functionality: fully functional, Year of construction: 2001, Hydraulic bending cylinder, SERTOM brand, model EMO 30-25. Year: 2001 Bjdpfx Acjza U Hdswswn Used machine.

Condition: used, mileage: 708,100 km, power: 338 kW (459.55 HP), first registration: 02/2000, fuel type: diesel, empty load weight: 17,100 kg, maximum load weight: 8,900 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 4,800 mm, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro2, suspension: steel, loading space length: 5,500 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, onboard computer, trailer coupling, Scania R144 460 V8 6x4 Flatbed with Heavy-Duty Crane First registration: 2/2000 708,100 km Long sleeper cab Manual transmission Air conditioning Trailer coupling 6x4 drive Leaf suspension Tyres 385/65 R22.5 tread approx. 60% Tyres 315/80 R22.5 tread approx. 60% Wheelbase: 4800 mm Flatbed length: 5500 mm Unladen weight: 17,100 kg Crane: Fassi F330/ F360XP Year of manufacture: 1999 Radio remote control Four-point outriggers 8 boom extensions in total 4 hydraulic extensions + 4 mechanical extensions 2.35 m / 12,500 kg 4.40 m / 7,055 kg 6.25 m / 4,825 kg 8.15 m / 3,600 kg 10.15 m / 2,835 kg 12.25 m / 2,330 kg 14.50 m / 1,815 kg (mechanical extension) 16.75 m / 1,440 kg (mechanical extension) 19.25 m / 1,000 kg (mechanical extension) Bjdpfx Asvik Skocwown 21.75 m / 800 kg (mechanical extension) Hydraulic hook height approx. 16 meters Hook height with mechanical extensions approx. 25.50 meters Export / net price: €29,900 All information without guarantee, subject to prior sale and errors.

Condition: used, mileage: 708,100 km, power: 338 kW (459.55 HP), first registration: 02/2000, fuel type: diesel, empty load weight: 17,100 kg, maximum load weight: 8,900 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 4,800 mm, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro2, suspension: steel, loading space length: 5,500 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, onboard computer, trailer coupling, Scania R144 460 V8 6X4 Flatbed with Heavy-Duty Crane Bodpevik Sqsfx Acwjwn First registration: 02/2000 708,100 KM Extended cab Manual transmission Air conditioning Trailer coupling 6X4 drive Leaf suspension Tyres: 385/65 R22.5 tread approx. 60% Tyres: 315/80 R22.5 tread approx. 60% Wheelbase: 4,800 mm Flatbed: 5,500 mm Unladen weight: 17,100 kg Crane: Fassi F330/F360XP Year of manufacture: 1999 Radio remote control 4-point support 8 extensions total 4 hydraulic extensions + 4 mechanical extensions 2.35m / 12,500 kg 4.40m / 7,055 kg 6.25m / 4,825 kg 8.15m / 3,600 kg 10.15m / 2,835 kg 12.25m / 2,330 kg 14.50m / 1,815 kg (mechanical extension) 16.75m / 1,440 kg (mechanical extension) 19.25m / 1,000 kg (mechanical extension) 21.75m / 800 kg (mechanical extension) Maximum hydraulic hook height approx. 16 metres Maximum hook height with mechanical extensions approx. 25.50 metres Export/ net price: 29,900 euros All information subject to change and errors excepted.

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 25 mm -Dimensions: see photo technical drawing Bodpfx Aey R Srmocwjwn -Overall dimensions: 100/75/H65 mm -Total weight: 2.3 kg

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 6,118 h, load capacity: 2,500 kg, lifting height: 7,780 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 3,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 Bwodpfx Aju D Rkaecwsn ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: good Front tires Type: Superelastic Front tires Condition: 20 - 40% Rear tires Type: Superelastic Rear tires Condition: 20 - 40% Sideshift, 3rd valve, rear working lights, front working lights,

Year of construction: 2024, condition: new, Länge/Breite/Höhe: 3200mm/1550mm/2750mm Weight: 3550 kg Bending force: 60 tons Bending length: 2050 mm Passage between stands: 1700 mm stroke: 265mm Installation height: 530 mm Projection: 410 mm table height: 900 mm table width: 104 mm Y Fast speed: 200 mm/sec. Bedpfx Acsfgz U Sswown Y Working speed: 10 mm/sec. Control CYBELEC MODEVA 19T touch screen CE with manual F.AKAS II M -FPSC-B-C (SAFETY PLC) Europ. upper tool P97.75.R08 (one of them in pitch) Europ. bottom tool M.460R.85 (one of them in pitch) Manual quick clamping Y1, Y2, X, R (4 axes) X=650mm X,R CNC controlled motor-driven crowning 60mm die holder (only for european dies) Overhang 410 sliding support arms at the front with T-slot, clip stop and guide along the entire line Backgauge : Siemens DC Servo motorized & linear guide & ball roller system Support arms 2 pieces Stop finger 2 pieces With foot pedal Oil capacity: 100l Price is valid from Staufenberg. The machine can be viewed and demonstrated at any time by appointment in our demonstration centre in Staufenberg. Further machines are ready for demonstration at our premises in Staufenberg. We will be happy to provide you with further information on request.

Condition: excellent (used), mileage: 30,191 km, color: white, lifting height: 30,000 mm, Year of construction: 2006, operating hours: 1,136 h, Drivetrain Drive: Wheel Weights Empty weight: 7.450 kg Functional Lifting capacity: 1.300 kg CE mark: yes Condition Technical condition: very good Bwsdpfx Aoyi Hdgscwjn Visual appearance: very good Other information Maximum lifting capacity at end of jib: 350 kg Delivery terms: EXW Transport dimensions (LxWxH): 8,6x2,3x3,2 Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Klaas K 25-30 TS * 2006 * Diesel drive * 1136 working hours * Equipped with a man basket * Refurbished remote control * 30-meter working height * 25-meter horizontal reach * 1300 kg lifting capacity * 30,191 km * 7,450 kg net weight

Condition: new, Robust craftsman’s machine with a spindle moulder tiltable 45° on both sides and MK4 interchangeable spindle. Stable steel and cast iron construction. Dynamically balanced milling unit anchored to the worktable. Exceptionally robust build. Smooth operation due to precision components and high intrinsic weight. Standard features include reversible rotation (left/right) with electronic interlock when changing direction. Five speeds from 3,000 to 10,000 rpm. Speed change is operated easily and conveniently from the machine's side. Comes as standard with MK 4 interchangeable spindle system. Large grey cast iron worktable for sustained precision. Easy handling via controls and speed display on the machine's front. Large-dimensioned milling fence with fine adjustment and aluminium fence jaws included as standard. Fence adjustment via hand crank with numerical digital display of spindle height in 0.1 mm increments. Powerful industrial motors. Delivery includes: Technical Data: Dimensions and Weight: Weight (net): approx. 510 kg _____ Dust Extraction Connection: Bsdsxnqx Ropfx Acwswn Extraction port diameter fence: 1 x 120 mm Extraction port diameter machine: 2 x 80 mm _____ Worktable: Worktable length: 2,500 mm Worktable width: 810 mm Table height: 923 mm _____ Setup Information: Space requirement details: dimensions take into account maximum travels or working lengths. Working area length: 3,700 mm Working area width/depth: 5,000 mm Note: Please add these working area dimensions to the space requirement to determine the recommended free installation area for the machine. _____ Equipment: Milling fence: heavy-duty professional design with aluminium fence jaws and fine adjustment, adjustable from the front via hand crank with numerical digital display. Arc milling safety guard: YES Spindle height adjustment: manual Spindle tilting adjustment: manual Control: manual height and angle adjustment of the milling unit Position of controls: on the machine body Table features: table extension left and right and pull-out workpiece support (total width 2,500 mm) _____ Electrical Data: Supply voltage: 400 V Mains frequency: 50 Hz Drive motor power: 7.0 kW _____ Milling Spindle: Spindle tilt: -45 to +45 ° Usable spindle length: 140 / 180 mm Clarification of usable spindle length: for spindle Ø 30-35 / for spindle Ø 40-50 mm Milling spindle stroke: 90 mm Interchangeable spindle: MK 4 Spindle speeds: 3,000/4,500/6,000/8,000/10,000 rpm _____ Max. milling tool diameters: Max. sinkable tool diameter: 320 x 60 mm Max. profile milling diameter: 250 mm Max. tenoning diameter: 350 mm Max. contour milling diameter: 160 mm

Condition: like new (used), Year of construction: 2017, operating hours: 186 h, load capacity: 2,500 kg, lifting height: 4,350 mm, fuel type: electric, mast type: triplex, construction height: 2,170 mm, Manufacturer + model: LINDE R 25 Mast: 3F4350 ID: 25106.2245 Category: New Mast: 3F4350 Lowered height: 2170 mm Lifting height: 4350 mm Capacity: 2500 kg Year: 27 Hours: 186 hours !!!! Bwedpozaf A Aefx Acwon Battery capacity: 48 v / 930 ah - manufactured 10 / 2023 Options: FULL cabin!! LINDE steering - Duo pedal!! Heated CABIN!! Wipers front & top & rear!! Cabin height = 2170 MM (+ beacon 140 MM) Complete in NEW condition!!!

Condition: like new (used), Year of construction: 2020, operating hours: 1,312 h, load capacity: 2,500 kg, lifting height: 4,760 mm, fuel type: electric, mast type: triplex, construction height: 2,160 mm, Manufacturer + model: LINDE E 25 L - 387 / 01 * EX * Miretti 3GD / Zone 2 & 22 Mast: 3F4760 ID: 25061.4742 Category: Used Mast: 3F4760 Lowered height: 2160 mm Lifting height: 4760 mm Capacity: 2500 kg Year: 2020 Hours: 1312 hours Capacity: 80 V / 625 Ah Options: CONTAINER specs!! * EX * MIRETTI!!!!! System = Miretti ATEX - 00101 Ref = E11138 Bwodszafxkepfx Acwon Type = Cat 3G (approved for ZONE 2) Gas group = IIB Temp. class = T3 Gc Type = Cat 3D (approved for ZONE 22 - Dust) Gas group = IIIB Temp. class = T200°C Dc Equipped with: - FULL cabin - Complete street lighting - Joystick control forward/reverse - Spreader / S.s. - Sunshade for windscreen & roof - LED spotlight - Triplex FFL mast - Flashing beacon - Completely new tires all around (with ATEX specs) LIKE NEW condition!!!!

Condition: good (used), travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,600 mm, Manufacturer: SORALUCE Type: TL-25 Control: HeidenHain TNC 430 Year of manufacture: 1998 Aiptek ATC 30 positions Automatic head 2.5 x 2.5 Gr Central lubrication Machine housing with front doors Large tool package Specifications Metric US Standard X-axis 2500 mm Y-axis 1000 mm Z-axis 1600 mm Table length 2860 mm Table width 1000 mm Table load 7500 Spindle power 25 kW Bodpfsv Idaljx Acwswn Spindle speed 0 - 3000 rpm Tool holder 50 ISO/Bt/Mk X-axis feed 10000 mm/min. Y-axis feed 10000 mm/min. Z-axis feed 10000 mm/min. Milling head auto index 2.5 x 2.5° Working hours 12500 H Dimensions (estimate) Length 6000 mm Width 3500 mm Height 3500 mm Weight 15000 kg Please note: The information on this page is correct to the best of our knowledge and belief and, where possible, has been obtained from the manufacturer. The information is given in good faith but its accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: good (used), Manufacturer: Millutensil Type: BV 25 PM Year of construction: 1987 Bwjdpfxorr Ui Re Acwon Closing force up to 18000 Kg Opening force up to 15000 Kg Driven table in & out feed Upper table 270 Gr Upper size 900 x 550 Specifications Metric US Standard Distance between uprights 930 mm Installation height 760 mm Table length 755 x 755 mm ram stroke 600 mm Starting speed 1000 mm/min. Working speed 1000 mm/min. Return speed 1000 mm/min. Table rotation 360 rpm Dimensions (estimate) length 1350 mm width 1350 mm Height 2000 mm weight 1500 kg

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Bwodpfx Aeyi A Tdecwsn Storage location: Nattheim

Condition: used, Year of construction: 2007, Working area: 2780 x 1140 mm (vertical milling) 2500 x 950 mm (horizontal drilling) X-Y travel: 2980 x 1271 mm Z-axis travel: 200 mm Passage height: 180 mm The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. On this mobile unit carrier, the working unit is mounted on prismatic, ground guides and the recirculating ball slide. Description of the units and accessories (basic) Drilling unit: Drilling head with 10 + 4 spindles · 6 individually accessible vertical spindles in X · 4 individually accessible vertical spindles in Y · 2 horizontal spindles in X (1 + 1) · 2 horizontal spindles in Y (1 + 1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M 10 with 11 mm fitting · Extraction nozzle: D = 160 mm Vertical milling unit (position 2) · Tool chuck HSK 63F · Speed 1,500 - 24,000 rpm continuously adjustable via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Right-hand / left-hand rotation · Ceramic bearings · Scope of delivery: 4 tool chucks (right) without collet chuck · Tool changer · Side-mounted tool magazine 7-way (TR7) with full encapsulation to prevent chipping · 7 tool positions for HSK 63F tool holder arranged in a row · maximum tool diameter D=120 mm · maximum weight per holder 4.5 kg · maximum tool weight of all tools 20 kg (TR7) · angular gears can be accommodated Horizontal milling unit (position 1) Horizontal unit with two opposite outputs for milling and grooving. · Speed 9,000 - 18,000 rpm continuously variable via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) · Motor power 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Bore saw blade (ER 32): 50 mm · Mandrel diameter saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum freedom of movement. The vacuum quick clamping system ensures maximum flexibility with precise positioning and optimal grip of the workpieces. · 4 supports 900 mm continuously adjustable in X · 8 vacuum suction cups round D = 110 mm continuously adjustable in Y (2 per support) · 2 stops in X (1 x left / 1 x right) · 1 stop in Y per support (total 6) · The retractable reference stops are controlled via CNC. · Scope of delivery: 4 plug-on adapters for suction cups · Pendulum machining standard (2 working areas) Axis movement The drive system in X, Y and Z is carried out via ground ball screws of the highest precision class. The ball drive screw of the X-axis is located exactly in the center Bsdsx Twdyjpfx Acwown

Condition: used, Year of construction: 1994, operating hours: 6,852 h, Type of fuel: Diesel Colour: Grey Empty weight: 3.920 kg Dimensions (LxBxH): 263 x 115 x 254 cm Lifting capacity: 2.500 kg Lift height: 400 cm Fork dimensions: 90 x 1.000 mm - Year: 1994 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 6BN10101 - Operating hours: 6852 - Lifting capacity: 2500kg - Lifting height: 4000mm - Overhead clearance: 2540mm - Free lift: 0mm - Fork length: 90mm - Maximum fork width: 1000mm - Minimum fork width: 210mm - Number of wheels: 4 Wheels - Attachment: Side-shift Bodjyr D Easpfx Acwewn - Options: Half cabin, Work lights - Mast: Duplex - Drive: Diesel - Motor brand: Mitsubishi - Transport dimensions: 2630mm x 1150mm x 2540mm (l x w x h) - Transport weight [kg]: 3920kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: excellent (used), Year of construction: 1992, Tilting spindle moulder with sliding table Manufacturer: Martin Model: T25 Year of manufacture: 1992 Bjdpfxsy Ahplj Acwewn Tilting range: -5° to +45° Height and angle adjustment: Electric Spindle diameter: 30 mm Power: 5/6 kW Spindle speeds: 3,000 / 4,500 / 6,000 / 9,000 rpm Reversible spindle direction: Yes Motor brake: Yes Right-side table extension with pull-out stop Left-side table extension with sliding table Sliding table for slotting operations Slotting guard Haffner feed unit with 3 rollers – stepless adjustable Weight: Approx. 1,500 kg Location: Ex stock 54634 Bitburg - immediately available -