Used Perforator for sale (889)

Condition: used, Year of construction: 2008, Overview This NIKO VP11e is a horizontal pneumatic (membrane) press for whole or destemmed grapes, built in 2008 by NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia). The press is made entirely of stainless steel and runs a fully automatic, multi-stage pressing program once started: grapes are loaded through the two perforated cylinder doors or axially, an internal membrane inflates against the load to extract juice at progressively increasing pressure, and the cylinder rotates between stages to break up ("crumble") the pressed cake ahead of the next drain cycle. Juice drains into a wheeled collection pan under the cylinder with a pump connection; pomace is discharged by rotating the open door face-down over the pan. The press is mounted on castors for repositioning and remains still installed and under power at the seller's winery in Spain. It can be inspected in operation on request. Technical data - Manufacturer: NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia) - Model: VP11e - Year of manufacture: 2008 - Machine type: horizontal pneumatic (membrane) press for grapes, mobile on castors - Cylinder volume: 1,100 L (cylinder Ø 920 mm) - Juice drainage pan (tina) volume: 450 L - Loading doors: 2, 640 x 420 mm each - Max. working pressure: 1.7 bar - automatic multi-stage program (pre-press 0.3 bar, then 0.8 / 1.2 / 1.7 bar for whole white grapes; 0.3 bar, then 0.8 / 1.2 bar for destemmed, fermented red grapes) - Integrated blower for membrane aspiration: -0.2 bar vacuum / +0.2 bar pressure - Power: 2.9 kW, single-phase 230 V (1/N/PE), 50 Hz - Mechanical protection: IP55 - Noise level: < 75 dB - Dimensions: approx. 2,520 x 1,270 x H 1,560 mm (with axial loading extension; 2,350 mm long without it) - Weight: approx. 430 kg Equipment - Pneumatic membrane pressing cylinder with integrated aspiration blower Dkodpfx Apozk Eqme Iju - Wheeled juice drainage pan with pump connection - Electric control panel with automatic pressing programs (incl. draining cycle) - Axial loading option - Safety guard on drive elements, door interlock switch and STOP switch - OEM operating manual (Spanish) Condition Used - still installed and under power at the seller's winery. No further condition report has been provided by the seller; the machine can be inspected in operation on site. Availability Immediately. Location: Spain. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: used, Year of construction: 2008, offer consists of: - high performance-finisher DocuCutter DC-645 Duplo DocuCutter DC-645 high performance-finisher for digital color printing: - feeder: air-suction feeder with lining up Dkedsx Afarspfx Ap Isu - operation: by LCD-display - control: barcode control - PC included - saveable jobs: 80 memories for repeat orders - error avoidance: ultrasonic-doublefeed control eject gate testprogram print mark reader - integrated knives: 6 lengthwise knives + 1 cross knife - size: max. 650x370mm min. 210x210mm - paper weight: 110-350g/qm - loading height: 100mm - creasing each sheet: max. 10 - production speed: max. 1500 sheets/h (A4) max. 720 sheets/h (A3) - power: 230V / 50Hz - 0,3kW - dimensions: 2.240x750x1.115mm - weight: 360kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: good (used), Technical specifications for the pallet rack upright: Shelving system: Jung Heinrich Type: Esmena Included in delivery: Pallet rack upright, used Material color: RAL 5019 blue Frame profile: MX630 Profile dimensions: 100 x 81.3 x 1.8 mm System perforation: 50/50 mm Dkjdpjwbf Amsfx Ap Ieu Incl. cross and diagonal braces, Foot plates The uprights are pre-assembled (screwed framework) Height: 9,000 mm Depth: 1,100 mm Your contact person in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, Year of construction: 1990, total length: 2,550 mm, total height: 1,600 mm, total width: 1,300 mm, - Year: 1990 - Documentation available: Yes - CE certificate present: No - Serial number: 11584/90 - Main motor power [kW]: 11 - Hydraulic unit power [kW]: 1.1 - Number of shafts [pcs.]: 1 - Opening width [mm]: 800 - Opening length [mm]: 1000 - Sieve perforation [mm]: 20 - Number of fixed knives [pcs.]: 25 - Transport dimensions: 2550mm x 1300mm x 1600mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Dkjdpfxewmbcyo Ap Isu Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2011, DIRECT FROM PRINTING SHOP We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from your side. offer consists of: - high performance-finisher DocuCutter DC-645 Duplo DocuCutter DC-645 high performance-finisher for digital color printing: - feeder: air-suction feeder with lining up - operation: by LCD-display - control: barcode control - PC included - saveable jobs: 80 memories for repeat orders - error avoidance: ultrasonic-doublefeed control eject gate testprogram print mark reader - integrated knives: 6 lengthwise knives + 1 cross knife - size: max. 650x370mm min. 210x210mm - paper weight: 110-350g/qm - loading height: 100mm - creasing each sheet: max. 10 - production speed: max. 1500 sheets/h (A4) max. 720 sheets/h (A3) Dodpfsu Sr Szox Ap Ieku - power: 230V / 50Hz - 0,3kW - dimensions: 2.240x750x1.115mm - weight: 360kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, Year of construction: 2007, Overview The Enoveneta TOP 15 is a grape de-stemming and crushing machine specially developed for use in wine production. It offers a capacity of 15-16 tons per hour and has a robust design made of AISI 304 stainless steel. The machine has been offered for sale due to non-use by the owner and is in good condition. Technical details  Capacity: 15-16 tons/hour Energy supply: Standard voltage 400/3/50 Motor power: Stalk remover: 2.2 kW Motorized auger: 0.55 kW Weight: 300 kg Dimensions: Length: 2,700 mm Width: 1,000 mm Height: 1,500 mm AISI 304 stainless steel frame on castors Perforated cylinder made of AISI 304 stainless steel with holes in sizes 25/22, 22/22, or 22/18 Functions  De-stemming: separation of the grapes from the stems through a perforated cylinder Crushing: Adjustable beater bar for gentle processing Removable beater bar and cylinder for easy cleaning Juice extraction: Integrated juice extraction system Speed control: Variator for dosing auger and stalk remover Accessories Open lid with removable whipping boom and cylinder Electric control panel Dksdpou Tyzqsfx Ap Iou

Condition: like new (used), Remark: This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt or dirt may be present. Technical data for the shelf traverse: Manufacturer: SSI Schaefer Racking system: R 3000 Truss type: KTRZ 31036 Included in delivery are: 02x shelf trusses, II. choice (new goods) Material color: sendzimir galvanized Z-profile: 60 x 40 x 12 mm clear width: approx. 994 mm perforated grid: approx. 53 mm agraffe: 3 HK (hooks) weight | pcs.: 1,700 kg max. load per truss pair 200 kg with evenly distributed load Dsdpfxen D Ebzo Ap Isku 01x wooden shelf, II. choice chipboard width: approx. 985 mm chipboard depth: approx. 755 mm material thickness: 22 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), CMC Ariemat ARM 75 Automatic Cardboard Creasing Machine The machine is fully operational and ready for production. Like new. This highly efficient creasing system is ideal for the production of binders, hard covers, and more. Made in Italy. Sheet feeding is manual, while the machine handles the rest automatically. An automatic feeder can also be added (optional). Parameters are set from the control panel and jobs can be saved to the machine’s memory. Materials processed range from 200 GSM to 4 mm cardboard. Sturdy construction, weighs 750 kg. Adjustable creasing and counter-creasing widths. Dkedpezw Typofx Ap Isu Stepper motor control. Fast operation, up to 2400 sheets/hour. Sheet size: 750 x 1400 mm. Two sheet guides with an extended table and pressure rollers. Quick machine format conversion in less than 1 minute. Receiving table included.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,072 h, functionality: fully functional, working width: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! The machine is in very good overall condition, both visually and technically. No visible damage, corrosion, or significant wear and tear can be detected. Maintenance was carried out internally using SAP PM (electrical maintenance every 6 months, mechanical maintenance every 3 months). TECHNICAL DETAILS Material: Continuous corrugated cardboard Working width max.: 2,500 mm Dodpfxjzu Akro Ap Ijku Minimum length: 200 mm Cardboard thickness: 2.57 mm Tool width: approx. 45 mm Longitudinal cutting accuracy: 0.2 mm Length tolerance: 1.5 mm/m Packaging size: 600 × 600 × 300 mm Performance: approx. 55 s/packaging unit Software and control (with 21" multi-touch panel and integrated control cabinet) PC: Beckhoff C6930 (Intel Core i5, 16 GB RAM, SSD) with Windows 10 IoT Enterprise Software: Beckhoff TwinCAT 3 Packaging design database: approx. 250 designs Production list control Dynamic tool management Multi-level waste optimization Bidirectional processing Remaining length monitoring Production data recording in CSV format Plain text error messages MACHINE DETAILS Operating hours: 13,072 h (in single-shift operation) Machine construction: Welded construction Multi-function tools for longitudinal processing: 6 Transverse processing tools: 1 Rubberized rollers: 2 Overpressure: segment-controlled Weight (according to nameplate): approx. 2,110 kg EQUIPMENT Automatic cardboard changer Automatic selection of the optimal cardboard web width Two stations for cardboard webs Box designer programming software for customer-side workstations Creasing, scoring, perforating, and cutting according to the single-point principle Material-friendly creasing technology to prevent the cardboard from flaking Perforation using an oscillating knife with adjustable perforation level Cutting using a toothed knife on a rubberized roller Clean, fiber-free cut edges Servo-motor adjustable tools Packaging designs Bottom/lid construction Bottom with corner locks for upright fixing of rims Lid according to FEFCO 0331 Suitable for the production of precisely fitting individual packaging for aluminum and forged wheels

Condition: good (used), KAS Crease Matic Auto 50 Automatic Creaser Machine in very good condition, from a state-owned institution. Description: Working width up to 500 mm. Sheet length up to 999 mm. Programmer with the ability to store up to 28 creasing/perforation positions. Sheet feeding is automatic, and the machine has a built-in Becker compressor. Easy-to-use control panel with the ability to store up to 99 programs. Sturdy metal construction mounted on wheels for easy movement. Dkodpfx Apszlgcys Isu A longitudinal perforation tool is included. Creasing of digital prints and laminated sheets is possible. Four creasing widths are included with the machine. Large work table. 230V power supply. Weight 190 kg.

Condition: good (used), Year of construction: 2008, Technical data: Printing Section 5 × UV Flexo Printing Units 5 × UV Dryers Web Inspection BST PowerScope 300 – Web Inspection System Unwinder Max roll diameter: 1250 mm Heavy-duty construction with pneumatic shaft and web tension control Integrated splicing table and web guiding system Dsdpfjz A Thbex Ap Ioku Rewinder Max roll diameter: 1250 mm (≈ 40 inch) Cold Foil / Lamination Module Enables in-line application of cold foil or over-lamination for premium label finishes (metallic, protective film, etc.) Turn Bar (Web Inversion Unit) Allows reverse-side printing or lamination – flexible for multi-layer label applications Rerailing Section 24” Supports reprocessing or secondary processing of pre-printed materials Additional Modules Die-cutting unit EM 510 (for use with magnetic cylinder, adjustable for gap) Cross-Cutting Cylinder (inline sheeting or perforation – precise longitudinal or transverse cutting) Punching Units (adjustable punching length from 12” to 26”, ideal for perforations, registration holes, or special die-cut shapes in-line)

Condition: good (used), ZNHZ-508A Envelope Making Machine Dodpfx Apez A H Sgj Ijku Paper weight 70 – 150 g/m² Production rate 3000 – 9000 pcs/h Maximum folded envelope size Western Style 324 x 229 mm Min. folded envelope size 100 x 100 mm Power 8 kW Weight 3000 kg Dimensions 6600 x 1200 x 1300 mm Year of manufacture 2014. Key advantages of the machine: – A bottom-mounted vacuum feeder allows for continuous material loading without stopping the machine. – A proprietary adjustable creasing and perforation system on the machine cylinder allows for loading material in the form of only the cut-out envelope outline. – Simple and easy adjustments simplify and shorten makeready time. – Standard bookbinding glue is applied from an inkwell through rotating rings with precise adjustment of its position and intensity. – Glue for the closure is also applied from an inkwell with precise adjustment of the intensity. – A vacuum suction system located on the cylinders allows for perfect folding of envelopes even at very high speeds. – The machine has two folding systems enabling double-closing of envelopes. – The electronic counting system is equipped with an electromagnetic separating device, allowing for separating envelopes, e.g., 50 pieces per envelope.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: Custom made, type of input current: three-phase, total width: 1,800 mm, total length: 14,650 mm, input voltage: 400 V, input current: 16 A, cutting width (max.): 1,800 mm, 22 C – Finn-Convey Industrial Spreading Line (14.65 m x 1.8 m) – Complete with Air-Flotation Description For sale is a professional-grade Finn-Convey industrial fabric spreading and cutting table line, offered as a complete production-ready system. This system is designed for efficient fabric spreading and preparation in high-volume cutting room operations. It enables controlled handling of heavy fabric rolls, precise layer alignment, and smooth material flow prior to cutting. The line has been operated as part of a dedicated production setup together with a Bergman cross cutting saw (unit 114 A). This combination allows efficient pre-cutting of fabric rolls into required lengths before spreading, significantly improving workflow efficiency and reducing manual handling. The equipment has been used in a professional garment factory and was operational prior to factory shutdown. Key Technical Specifications Dkjdey Au Aljpfx Ap Isu • Total length: 14.65 meters (modular structure, adjustable configuration) • Table width: 1.80 meters (suitable for wide fabrics) • Technology: Air-flotation table system for low-friction material handling • Drive system: Motorized side drive units ensuring controlled spreading tension System Components • Finn-Convey motorized side drive units • Industrial air-flotation table structure with perforated surface • Integrated blower system with centrifugal fans under tables • Electrical control cabinet for system operation • Fabric roll handling stands and support assemblies • Integrated end cutting unit with circular blade system Cutting Unit Technical Details • AC speed-controlled motor (Taili Motor Co., Ltd., approx. 90–200W range)14650 • Gear reduction unit (e.g. 5GN-series) for high torque output • Circular cutting blade with integrated sharpening mechanism • Adjustable vertical guide rails for cutting height positioning • Designed for efficient cutting of multi-layer fabric stacks Auxiliary Drive Components • Auxiliary induction motor (e.g. 40W class, speed-controlled) for fine positioning and movement control • Gear-driven transmission for stable and continuous operation • External capacitor-based start system (typical for single-phase auxiliary motors) System Architecture • Modular table construction allowing flexible layout adjustments • Air-assisted material movement reducing friction and operator effort • Cradle-type roll handling enabling tension-free fabric feeding • Encoder-based or mechanical length control depending on configuration • Compatible with upstream roll cutting equipment and manual or semi-automatic workflows Production Advantages • High efficiency with long cutting layouts and reduced material waste • Excellent ergonomics, heavy fabric stacks can be moved with minimal force • Accurate layer alignment supported by controlled drive system • Integrated cutting capability improves workflow continuity • Suitable for a wide range of materials including denim, upholstery, and technical textiles Condition Used industrial condition Removed directly from production after factory shutdown Typical signs of use from industrial environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional dismantling strongly recommended due to system size and electrical installation

Condition: ready for operation (used), Year of construction: 2010, Belt sander manufactured in 2010. This FORMAT4 Finish 1302 features two internal sanding belt units with pneumatic tensioning and adjustment controls. It includes an analog control panel with dual ammeters, a digital height indicator, and a vacuum/perforated conveyor bed for efficient operation. If you are looking to get high-quality sanding capabilities, consider the FORMAT4 Finish 1302 machine we have for sale. Contact us for further details. - Voltage: 400 V / 3-phase / 50 Hz- Power: 32.0 kW- Amperage: 64.0 A- Sanding Units / Stations: 2 internal sanding belt units (P80 and P60 setup with pneumatic tensioning and adjustment controls)- Control Panel: Analog panel with dual ammeters, digital height indicator (Gefran), feed/speed selectors, emergency stop button, key switch Dkjdpjzyak Hjfx Ap Iou

Condition: used, mileage: 48,939 km, power: 90 kW (122.37 HP), first registration: 11/2011, fuel type: diesel, empty load weight: 3,060 kg, maximum load weight: 2,940 kg, overall weight: 6,000 kg, axle configuration: 4x4, wheelbase: 2,300 mm, brakes: other, color: orange, driver cabin: day cab, gearing type: other, emission class: euro5, suspension: steel, number of seats: 3, loading space length: 1,780 mm, loading space width: 1,630 mm, loading space height: 400 mm, operating hours: 5,095 h, Equipment: air conditioning, all wheel drive, cabin, differential lock, immobilizer system, onboard computer, power assisted steering, soot filter, trailer coupling, * German vehicle * First owner * Only 48,939 km on the odometer * Only 5,095 operating hours * All-wheel drive hydrostatic transmission * All-wheel steering, switchable * Condition, see photos * Type: Kiefer Boki HY1251B three-way tipper (optional) with irrigation technology for green spaces and plants. Other possible applications where mobile water is required. * Watering arm Hummel Kommunaltechnik, type GH-U * Due to its mounting on a swivel axis, the watering arm can be swung to the left and right. Everything can be operated from the driver's cab. * The maximum swivel range is 220° * The lifting, extending, and swiveling of the watering arm are controlled via a joystick in the driver's cab * Water system from the specialist manufacturer for irrigation technology, Hummel Kommunaltechnik, type WH-U * Tank with a capacity of 2,000 liters * The water tank can be filled from water pipes, hydrants, or even rivers. * Hose reel at the rear with hose for individual use for watering * 2 pumps, each with 15 bar * 2 trailer couplings * Trailer load capacity: 3,500 kg * Rear hydraulics with electrical connections * Municipal work platform with hydraulic and electrical connections * Bed dimensions: Length 1,780 mm x Width 1,630 mm x Height 400 mm * DIN lashing eyes * Perforated floor * Comfortable cabin with 3 seats Djdpfjzf Nqgjx Ap Ioku * Air conditioning * Differential lock * Municipal lighting and headlights * Joystick control * Rear view camera * Rotating beacons * Leaf spring suspension * Wheelbase: 2,300 mm * GVWR: 6,000 kg * Unladen weight: 3,060 kg * Payload: 2,940 kg If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV, without a new SP, without a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods so that no false impressions arise in the buyer about the condition and suitability. Inspections and examinations are possible and expressly desired at any time by appointment. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods / vehicle. Subject to change, prior sale, and errors.

Condition: used, maximum load weight: 29,075 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2019, next inspection (TÜV): 01/2027, total length: 13,820 mm, total width: 2,550 mm, total height: 3,277 mm, Equipment: ABS, Krone Steel Platform Trailer * Krone axles with air suspension and disc brakes Dkedpozp Abajfx Ap Iou * 1st axle can be raised * Pallet box * Stanchion pockets * Stanchions + holders * Perforated strip * Tie-down straps * Storage box * Overwidth signs * 385/65 R22.5 tires * Spare wheel holder We are happy to provide you with further information.

Condition: used, mileage: 16,200 km, power: 390 kW (530.25 HP), first registration: 01/2023, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: blue, gearing type: automatic, emission class: euro6, loading space volume: 12 m³, Equipment: ABS, air conditioning, navigation system, parking heater, Service book maintained * Trailing axle unloadable and liftable. ---- Suction excavator MTS DINO12, container volume approx. 12 cbm, stainless steel lining, hydrostatic drive Hydrostat (suction+drive+steer), PLC control with prepared remote diagnostics, radio remote control, HIGH-TIP high tipper with 4 supports, POWERARM strength arm with 7m suction hose, movable strength arm EVO-POWER ARM GEN2, rotary suction pipe system IKE/PERFOR, MTS double fan Power+, HBC control, Industrial Package I: grounding system, Industrial Package II: gas sensor, MTS material separation system, automatic filter cleaning, high-pressure water system 30 l/min, dirty water pump, digital turn assist. ---- * Front axle 9.0 t * Trailing axle, 9 t, steered, unloadable, liftable * Axle ratio i = 4.571 * Electronic Braking System (EBS) with ABS and ASR * Disc brakes on front and rear axles * Parking brake, electronic * Wheelbase 4,200 mm * Driver suspension seat, comfort * Air conditioning * Residual heat utilization * Additional hot water heater, driver cab * Roof hatch/ventilation flap on roof * Interface, Fleet Management System FMS * Trailer socket 24 V, 15-pin * Reverse warning combined with hazard warning lights * M-cabin (medium length) * ClassicSpace M-cabin, 2.30 m, tunnel 170 mm * Sun visor outside, transparent * Compressed air horn * MirrorCam * Bumper, center part towing eyes, coupling mouth * Locking system, with central locking * Comfort locking system * Light sensor * Rain sensor * Predictive Powertrain Control (PPC) * Automatic transmission * Mercedes PowerShift 3 * Driver’s seat heating * Wheel formula 8x4 ENA * 32.0 tonner * Air suspension, rear axle * Navigation system * Axle load measuring device * Tank 430 liters * AdBlue tank 60 liters * Fog lights, LED daytime running lights * 2 LED rotating warning beacons * Headlight cleaning system * Engine OM471, R6, 12.8 l, 390 kW (530 HP), 2600 Nm * Engine version Euro 6, E * High Performance Engine Brake * Gearbox oil cooling * Engine PTO rear, c, hydraulic pump ISO 7653D * Front spring 9.0 t, 4-leaf Dodjwruw Uspfx Ap Isku * Tow coupling, rear, Ringfeder * Aluminum rims 9.00 X 22.5 * Aluminum rims 11.75 X 22.5, front axle * Aluminum rims 11.75 X 22.5, trailing axle * Cruise control * Weight variant 37.0 t (9.0/10.5/10.5/8.0) * ATS warranty according to terms and conditions, 3 years/250000 km * Refrigerator on engine tunnel * Storage box * EBS * Without spare wheel ---- Sale only to commercial customers! No guarantee for the information! Subject to prior sale! Only our general terms and conditions apply! We are happy to offer you a leasing or financing option.

Condition: used, mileage: 16,200 km, power: 390 kW (530.25 HP), first registration: 01/2023, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: blue, gearing type: automatic, emission class: euro6, loading space volume: 12 m³, Equipment: ABS, air conditioning, navigation system, parking heater, Service book maintained * Trailing axle unloadable and liftable. ---- Suction excavator MTS DINO12, container volume approx. 12 cbm, stainless steel lining, hydrostatic drive Hydrostat (suction+drive+steer), PLC control with prepared remote diagnostics, radio remote control, HIGH-TIP high tipper with 4 supports, POWERARM strength arm with 7m suction hose, movable strength arm EVO-POWER ARM GEN2, rotary suction pipe system IKE/PERFOR, MTS double fan Power+, HBC control, Industrial Package I: grounding system, Industrial Package II: gas sensor, MTS material separation system, automatic filter cleaning, high-pressure water system 30 l/min, dirty water pump, digital turn assist. ---- * Front axle 9.0 t * Trailing axle, 9 t, steered, unloadable, liftable * Axle ratio i = 4.571 * Electronic Braking System (EBS) with ABS and ASR * Disc brakes on front and rear axles * Parking brake, electronic * Wheelbase 4,200 mm * Driver suspension seat, comfort * Air conditioning * Residual heat utilization * Additional hot water heater, driver cab * Roof hatch/ventilation flap on roof * Interface, Fleet Management System FMS * Trailer socket 24 V, 15-pin * Reverse warning combined with hazard warning lights * M-cabin (medium length) * ClassicSpace M-cabin, 2.30 m, tunnel 170 mm * Sun visor outside, transparent * Compressed air horn * MirrorCam * Bumper, center part towing eyes, coupling mouth * Locking system, with central locking * Comfort locking system * Light sensor * Rain sensor * Predictive Powertrain Control (PPC) Dsdpfswruw Isx Ap Ioku * Automatic transmission * Mercedes PowerShift 3 * Driver’s seat heating * Wheel formula 8x4 ENA * 32.0 tonner * Air suspension, rear axle * Navigation system * Axle load measuring device * Tank 430 liters * AdBlue tank 60 liters * Fog lights, LED daytime running lights * 2 LED rotating warning beacons * Headlight cleaning system * Engine OM471, R6, 12.8 l, 390 kW (530 HP), 2600 Nm * Engine version Euro 6, E * High Performance Engine Brake * Gearbox oil cooling * Engine PTO rear, c, hydraulic pump ISO 7653D * Front spring 9.0 t, 4-leaf * Tow coupling, rear, Ringfeder * Aluminum rims 9.00 X 22.5 * Aluminum rims 11.75 X 22.5, front axle * Aluminum rims 11.75 X 22.5, trailing axle * Cruise control * Weight variant 37.0 t (9.0/10.5/10.5/8.0) * ATS warranty according to terms and conditions, 3 years/250000 km * Refrigerator on engine tunnel * Storage box * EBS * Without spare wheel ---- Sale only to commercial customers! No guarantee for the information! Subject to prior sale! Only our general terms and conditions apply! We are happy to offer you a leasing or financing option.

Condition: new, Technical data: Working width mm 1,350 Min./max. working height mm 4 - 170 Sanding belt width/length mm 1,370/2,620 Main motor power kW 18.5 with inverter Feed speed, variable m/min 3.5 - 18 Working units: 1. Unit: "RA" diagonally ribbed contact roller, Sh 86, diameter 160 mm 2. Unit: Combi: rubber-coated sanding roller, diameter 160 mm, 45 Sh Elastic electronic segmented sanding pad "MESAR" with 24 segments Version C: - Elastic electronic segmented sanding pad "MESAR" complete with: - Pneumatic cylinder (on/off) for the automatic raising and lowering of the sanding roller/sanding pad unit - Activation of the sectors via the electronic control system, which synchronizes their engagement with the feed speed and controls the number based on the workpiece geometry, and enables the selection of more or fewer sectors to the left and right of the workpiece. Version 135: "MESAR 24" with 24 segments, segment width 55 mm, complete with B/24 workpiece sensing strip at the infeed Additional equipment: Roller table at the infeed and outfeed for long workpieces Perforated table and conveyor belt Vacuum table with electric fan 4 kW (5.5 hp) integrated into the machine frame Oscillating blow-off device, 2nd unit Touch screen 10.4" display with 'eye S software integration' ATTENTION: IMAGES are EXAMPLE IMAGES of a SIMILAR SD70! Dkjdpfxshtuvre Ap Ieu

Condition: used, mileage: 111,603 km, power: 141 kW (191.71 HP), fuel type: gasoline, gearing type: automatic, first registration: 04/2018, next inspection (TÜV): 03/2027, emission class: euro6, color: grey, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, Special equipment: Exterior/interior mirror with automatic anti-dazzle function, exterior mirror package, business package, navigation system: navigation (USB), service system: real-time traffic information (RTTI), front seat heating, lumbar support for front left and right seats, electrically adjustable, interior mirror with automatic anti-dazzle function, CD drive, dynamic damping control, luggage compartment separation (net), Hi-Fi speaker system, inductive charging cradle for smartphone (wireless charging), interior trim: aluminum interior trim with fine longitudinal grain, light alloy wheels 8x19 (double-spoke 572 M, bicolor), metallic paintwork, navigation system: navigation Plus (USB), head-up display, panoramic sunroof (glass), park distance control (PDC) front and rear, driver assistance system: park assistant, smoker's package, tire system run-flat (with emergency run-flat properties), seat cover / upholstery: Dakota leather, perforated, rear seats mechanically adjustable, sun protection glazing (darkened at the rear) Additional equipment: Dedpfx Apjz D Rvle Ijku Storage package, airbag driver/front passenger side, equipment package: ConnectedDrive Services, AUX-IN connection, exterior equipment: high-gloss Shadow-Line, on-board computer, headliner anthracite (BMW Individual), roof rails high-gloss Shadow-Line, anti-theft locking wheel bolts, hands-free system Bluetooth with USB/audio interface, floor mats velours, Isofix mounting for child seat in rear, body: 5-door, automatic climate control 2-zone with automatic recirculating air control, head airbag system rear, head airbag system front, fuel tank: enlarged, luggage compartment floor foldable, luggage compartment floor variable, lighting package, front footwell lighting, rear footwell lighting, reading lights front, reading lights rear, M Sport, engine 2.0 liter - 141 kW 16V, multi-function steering wheel, parking brake electric, wheelbase 2670 mm, rear seat backrest split/folding (40:20:40), low emission according to emission standard Euro 6, heated windshield washer nozzles, side airbag front, service system: ConnectedDrive Services, service system: intelligent emergency call including TeleServices, service system: remote services, seat cover / upholstery: fabric / Alcantara, sports seats front, start/stop system (function), variable sports steering, heat-insulating tinted glazing.

Year of construction: 2025, condition: new, functionality: fully functional, power: 0.35 kW (0.48 HP), overall weight: 557 kg, total length: 1,306 mm, total width: 1,876 mm, total height: 1,993 mm, input voltage: 230 V, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits: The ASCO VS COMPACT ONE DECK is a semi-mobile vibration screen ideal for recycling, construction, agriculture, landscaping, and biomass processing. Compact yet powerful, it provides efficient material separation for soil, gravel, wood chips, and waste. Its foldable, modular design ensures easy transport, quick setup, and reliable operation - perfect for dynamic on-site screening tasks. Key Features: • Two powerful vibration motors for efficient, precise screening • Quick-change screen decks for various mesh and perforated sheets • Adjustable screen angle for different materials and applications • Compact, foldable design for easy transport and setup • 230V connection for simple plug-and-play operation Tech Highlights: L 1.31 m · W 1.88 m · H 2.0 m · Qmax 23 t/h · P 2 × 0.35 kW · Screen area 1.5 m² · Max bucket width 1.6 m · Weight 557 kg · Loading height 1.63 m Dksdpfx Aow R N Uwsp Iou

Year of construction: 2023, operating hours: 15 h, condition: as good as new (ex-display), functionality: fully functional, power: 0.35 kW (0.48 HP), overall weight: 621 kg, total length: 1,306 mm, total width: 1,876 mm, total height: 2,112 mm, input voltage: 400 V, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits: The ASCO VS Compact Two Deck Vibration Screen delivers efficient material separation for recycling, construction, agriculture, and landscaping. Ideal for screening soil, gravel, wood chips, and waste, it offers high throughput, flexibility, and compact mobility—perfect for professionals needing reliable, space-saving performance on any job site. Key Features: • Dual-deck screening: up to three material fractions Djdpfsw Ryzusx Ap Isku • Compact, foldable design for easy transport and setup • Modular add-ons: conveyors, funnel plate, and more • Adjustable screen angle for optimal separation • Quick-change screen system for perforated sheets, grids, or bar sizers Tech Highlights: W 1.88 m · L 1.31 m · H 2.11 m · Loading height 1.76 m · Screen area 3 m² · Qmax 30 t/h · Power 2 × 0.35 kW (400 V) · Max bucket width 1.65 m · Weight 621 kg

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 1490 € 1500 x 1000 mm 850 mm 344 kg 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet with levelling option Dedewirg Ijpfx Ap Ieku - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 500 kg/m²

Condition: new, neu ca. 4 Wochen ab Auftragse Dksdpowirwaefx Ap Ieu 1940 € 2000 x 1000 mm 850 mm 449 kg 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet with levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 500 kg/m²

Condition: used, functionality: fully functional, total width: 1,600 mm, total length: 1,600 mm, total height: 2,500 mm, Industrial Stone Separation System for Denim & Garment Finishing Lines The Tonello Mini Destoner is a professional industrial stone-removal unit manufactured by Tonello S.r.l., Italy. The machine is designed to efficiently separate pumice stones from garments after the stone-washing process, protecting downstream equipment while reducing manual handling and improving production efficiency. Integrated into professional garment finishing lines, the Mini Destoner allows garments to tumble inside a rotating stainless steel drum while pumice stones pass through the perforated separator and are collected in a dedicated container below. This unit was previously part of the MASI JEANS industrial denim finishing line and is suitable for integration with Tonello and other industrial garment washing systems. Technical Specifications • Manufacturer: Tonello S.r.l. • Model: Mini Destoner • Machine Type: Industrial Garment Stone Removal Unit • Application: Automatic separation of pumice stones after garment stone washing • Machine Compatibility: Tonello G1 330 HS and other Tonello industrial garment washing machines • Internal Reference: K344 • Country of Manufacture: Italy • Construction: Stainless steel rotating drum mounted on heavy-duty steel frame • Drum Protection: Perforated conical safety separator • Electrical Supply: Typically 400 V, 3-Phase, 50 Hz (to be verified during inspection) Key Features • Designed specifically for post stone-wash garment processing • Efficient separation of garments and pumice stones • Stainless steel rotating drum • Heavy-duty perforated separator cage • Integrated stone discharge chute • Mobile industrial steel frame with locking caster wheels • Operator control panel • Heavy-duty industrial construction • Suitable for continuous production environments Includes • Tonello Mini Destoner unit • Stainless steel rotating drum • Steel support frame • Perforated separator cage • Stone discharge chute • Operator control panel • Collection container • Industrial transport crate Applications • Denim stone washing • Garment finishing • Pumice stone removal • Industrial laundry operations • Textile wet processing • Denim manufacturing • Industrial garment production Condition • Previously used in professional denim production • Good industrial condition • Structurally complete • Includes all major mechanical assemblies • Normal cosmetic wear consistent with factory use • Available for inspection before dismantling Location Valga, Estonia Dkedpfx Apozmwlhs Isu Dismantling & Transport Buyer is responsible for disconnecting, dismantling, loading, transportation, and all related costs. Professional handling is recommended due to the industrial construction of the equipment. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machine is available individually or together with the complete Tonello industrial washing and finishing line.