Used Pickers for sale (217)

Condition: used, machine/vehicle number: IC1518, Year of construction: 2022, operating hours: 1,031 h, load capacity: 1,000 kg, lifting height: 3,200 mm, fuel type: electric, mast type: simplex, enginetype: Electric, manufacturer: Jungheinrich Serial Number: 91666574 Cjdpfx Akoz Shytetsri

Condition: used, Year of construction: 1998, Serial No. 174520, control unit, manufacturer Arburg, closing force 400 kN, screw diameter 20 mm, sprue picker, manufacturer TecnoMatic, type micro cnc, vacuum separator, manufacturer Piovan, type DPA20, year of manufacture 2016, microprocessor control, 2 temperature control units, internal numbers 14 and 19, F, drying cylinder, desiccant dryer, manufacturer Piovan. Crsdpfx Aksz Hl H Rstei

Condition: ready for operation (used), Year of construction: 2020, A modular narrow-aisle combination forklift Linde is available. Load capacity: 1100kg, load center: 600mm, wheelbase: 1730mm, lift height: 7200mm, overall height: 4900mm, mast: duplex, transport width/length: 1450mm/3350mm, weight: approx. 8200kg, battery weight: approx. 1600kg, operating hours: 1236h. Documentation available. An on-site inspection is possible. Crsdpoxc Nknefx Aktsi

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 135 kg, lifting height: 2,997 mm, fuel type: electric, mast type: telescopic, construction height: 1,385 mm, drive type: Elektro, Medium-height order picker Mast type: Telescopic Condition: New Technical condition: New Battery voltage: 24V Battery capacity: 105Ah Credpfxozrccij Aktoi Battery type: Lithium-ion Battery year of manufacture: 2026 Battery condition: New Override for lift/lower switch: No override for lift/lower. Drive/lift signal: All warning signals. Bumper: Bumper with rubber protection. Storage compartment on the right side. Load platform, manually adjustable: 540 x 685 mm. Strobe light: Front & rear. Storage compartment. Operator login code: Access 123. German signage. Operating manual: German. Paint: Orange. Battery: 205 Ah, maintenance-free. Charger: 30 Amp, 85-265 VAC with cord and IEC socket with CEE 7/7 plug.

Condition: used, machine/vehicle number: IC1425, Year of construction: 2021, operating hours: 2,543 h, load capacity: 1,200 kg, lifting height: 10,500 mm, fuel type: electric, mast type: triplex, enginetype: Electric, manufacturer: Jungheinrich Serial Number: FN641953 Csdjzxvxkspfx Akteri

Condition: used, Electric pallet stacker - pedestrian stacker, drawbar stacker for the ergonomic handling of small loads Manufacturer EXPRESSO, Model Lift & Drive 225P (lift2move) Credeflt Edjpfx Aktsi Serial No. 19500S, Year of manufacture 2008 Model No. Rated load capacity 225 kg Lifting stroke 1680 mm Lifting height 2200 mm Lifting speed (unladen / laden) approx. 100 / 75 mm/s Outreach of lifting device 861 mm Chassis length 1020 mm Ground clearance 90 mm Underneath length 600 mm Chassis design (front / rear) Ø 80 / 140 mm (2 fixed / 2 swivel castors) Overall length 1400 mm Overall width 600 mm Overall height 2450 mm Motor power 400 W Battery capacity 24 V / 16 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Cable remote control with coiled cable and 2 lifting speeds - Battery pack with quick-change system - Battery charge indicator - 2 units of 12 Volt, 17 Ah lead-acid batteries installed in the battery pack - External charger 24 VDC, 3 Amps (mains voltage 230 V, 50 Hz) - Can be moved manually, swivel castors with three-stage parking brake - Handlebar infinitely adjustable in height - Load receiving flange according to EXPRESSO standard Special version: lifting device from GIESLER for radial fan SC-1000 CP XT (Tiger) - Load capacity of the lifting device 25 kg - Lifting device can be swivelled 90° via manual hydraulic pump - Opening width between the support jaws 300 / 330 mm - Opening width between the clamping rollers 200 - 300 mm - Clamping is done via handwheel - Weight of the lifting device 60 kg Total weight 140 kg very good condition

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 1,401 h, load capacity: 1,000 kg, lifting height: 1,880 mm, free lift: 860 mm, fuel type: electric, construction height: 1,560 mm, fork length: 1,150 mm, drive type: Elektro, Vertical order picker Load centre: 600 Condition: Ready for operation and fully functional Technical condition: very good Front tyres type: Polyurethane Rear tyres type: Polyurethane Cedpfx Akjz El Sdjtsri Battery voltage: 24V Battery capacity: 620Ah Battery year of manufacture: 2021 Description:

Condition: excellent (used), Year of construction: 2005, Krauss Maffei KM 80-180 CX with the Sepro Industrial Robot 55 sprue picker Year of construction: 2005 Injection unit: Screw diameter: 30 mm Injection weight: 77.4 g Injection pressure: 2025 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 80 t Distance between tie bars: 420x420 mm Size of the clamping plates: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC V - touch screen Additional equipment: Euromap 67 Crjdpoz Iqn Aefx Aktji Robot interface Control unit with air valve Hydraulic core pull x 1 Hardened injection unit - bimetal Sprue picker Sepro Industrial Robot 55 Year of construction: 2018 It is possible to purchase a Moretto brand raw material feeding system for an additional charge The set includes: - Screw feeder, volumetric with hopper - Feeder with proportional valve Dimensions: Weight: 3900 kg Length/width/height: 3.80x1.50x2.10 m Drive: Pumps/motor: 15 kW Heating output: 8.12 kW Total output: 23.12 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: used, machine/vehicle number: IC1469, Year of construction: 2022, operating hours: 5,898 h, load capacity: 2,500 kg, fuel type: electric, mast type: other, fork length: 2,400 mm, enginetype: Electric, manufacturer: Jungheinrich Codpozxvw Hjfx Aktori Serial Number: 90662102

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 615212V00233, Year of construction: 2019, operating hours: 5,386 h, load capacity: 1,000 kg, lifting height: 1,070 mm, mast type: duplex, fork length: 1,150 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 1,070 mm Lifting capacity: 1,000 kg Mast type: Duplex Fork length: 1,150 mm Fork width: 560 mm MACHINE DETAILS Drive type: Electric Battery type: Lithium-ion Battery brand/type: TC5207-05 Battery year of manufacture: 2019 Crsdpfx Akjz Ni Dgetji Battery capacity: 260 Ah Battery voltage: 24 V Operating hours: 5,386 h Dimensions & Weight Dimensions (L x W x H): 1,700 x 800 x 1,620 mm Unladen weight: 1,638 kg Shipping packages: 1 unit EQUIPMENT Man-up function Documentation available CE marking available Lithium-ion battery including charger

Condition: used, functionality: fully functional, machine/vehicle number: 91645644, Year of construction: 2020, operating hours: 1,006 h, load capacity: 135 kg, lifting height: 3,000 mm, fuel type: electric, construction height: 1,433 mm, drive type: Elektro, Vertical order picker Chassis number: 91645644 Condition: Ready for use and fully functional Technical condition: good Description: Lifting height: 3000 mm, overall height: 1433 mm, order picking height: 5331 mm, standing height: 3324 mm Codpfjzwtapex Aktsri

Condition: excellent (used), Picker Hahn SP5, x=100mm, y=650mm, z=90º Codpfx Asu Iuw Eskteri y.2015

Condition: excellent (used), Year of construction: 2008, Arburg 370S 600-70 Year of manufacture: 2008 Injection Unit: Screw diameter: 25 mm Shot weight: 40 g Injection pressure: 1,550 bar Metering volume: 44 cm³ Clamping Unit: Clamping force: 60 t Tie bar spacing: 370 x 370 mm Platen size: 510 x 510 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: - Euromap 67 - Robot interface - 8x air valves - 1x hydraulic core pull - Controller for hot runner (6 zones) - Injection unit: hardened, bimetallic Crodoz Iqz Njpfx Aktoi - Integrated sorting flap - Integrated original Arburg side gate picker - Option to set up vertical injection unit using special brackets - Screw diameter can be changed to 22, 25, or 30 mm Dimensions: Weight: 3,160 kg Length/Width/Height: 3.48 x 1.46 x 2.03 m All machines offered are started and tested by our technicians prior to sale. A video of the technical tests for the selected machine can be provided, or live technical tests can be attended at our facility in Łódź. Price: On request

Condition: good (used), Year of manufacture 2004 Operating hours 5,526 h incl. battery charger Fork length 1,200 mm Load capacity 1,000 kg Lifting height 6,500 mm Own weight 2,580 kg Battery weight 700 - 800 kg Codpfsylmbwox Aktjri Battery 48 V additional images available

Condition: used, Electric stacker – pedestrian stacker, tow stacker for ergonomic handling of small loads EXPRESSO Type Lift & Drive 125 (lift2move) Serial No. 194679 Year of manufacture 2015 Type No. 1418242111 Rated load capacity 125 kg Lifting height 1450 mm Total lifting height 1785 mm Lifting speed (unloaded / loaded) approx. 100 / 75 mm/s Outreach of lifting support 530 mm Chassis length 890 mm Ground clearance 90 mm Underrun length 490 mm Chassis design (front / rear) Ø 60 / 100 mm (2 swivel casters / 2 swivel casters) Overall length 890 mm Overall width 545 mm Overall height 1930 mm Motor power 250 W Battery capacity 24 V / 7.2 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Cable remote control with spiral cable and 2 lifting speeds - Battery pack with quick-change system - Battery charge level indicator - 2 pcs lead-acid battery 12 Volt, 7.2 Ah installed in the battery pack - External charger 24 VDC, 2.5 Amperes (mains voltage 230 V, 50 Hz) - Manually steerable, swivel casters with three-stage parking brake - Handle continuously adjustable in height - Load receiver U-profile for square profile according to EXPRESSO standard 210 x 45 mm / internal dimension 30 mm / 4 mounting holes M8 at a distance of 50-60-50 mm Cjdpfxjflt Ebs Akteri Mounted lifting support: Special design from GIESLER LAM-DC power rail Load capacity of lifting support 40 kg Weight of lifting support 24 kg Support rail laterally adjustable by +-90 mm via linear guides (3 locking points left, center, right) Support rail swiveling +-38° (infinitely adjustable and lockable) Support rail with 2 clamping jaws Distance between the clamping jaws 550 mm Material clamping thickness 100 mm Dimensions of material support W x D 650 x 155 mm Total weight 75 kg very good condition

Condition: used, machine/vehicle number: IC1464, Year of construction: 2022, operating hours: 595 h, load capacity: 2,500 kg, fuel type: electric, mast type: other, fork length: 2,400 mm, enginetype: Electric, manufacturer: Jungheinrich Credpfx Aozxktpsktei Serial Number: 90655434

Condition: good (used), Year of construction: 2012, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 35 mm, injection pressure: 2,000 bar, total length: 4,400 mm, total width: 1,900 mm, total height: 2,000 mm, overall weight: 5,280 kg, warehouse no.: 503729 manufacturer: ARBURG type: Allrounder 470 E 1000-290 controller: Selogica year of construction: 2012 clamping force: 1000 kN distance between tie-bars h x v: 470 x 470 mm size of mould plates h x v: 637 x 637 mm min. mould height: 250 mm max. mould height: 500 mm max. open daylight: 850 mm screw diameter: 35 mm swept volume: 144 ccm injection pressure: 2000 bar Codpfx Aez Eahaektjri equipment included incl. Spruepicker screen text german CEE-socket 16A core pulling hydraulically 1x Anti vibration mounts mould heating 6x handling type: Linear manufacture: ARBURG controller: INTEGRAL PICKER year of construction: 2012 measures of machine l x w x h: 4.4m x 1.9m x 2m total weight: 5280KG

Condition: new, functionality: fully functional, machine/vehicle number: PRS200NEU, Year of construction: 2025, load capacity: 2,000 kg, mast type: simplex, drive type: Lithium-Ionen, construction width: 790 mm, Low-level order picker Chassis number: PRS200NEU Mast type: none Condition: New equipment Technical condition: New Front tyre type: Polyurethane Front tyre condition: New Rear tyre type: Polyurethane Rear tyre condition: New Battery voltage: 24V Battery capacity: 300Ah Battery type: Lithium-ion Battery year: 2025 Crsdpsy Upumjfx Aktei Battery condition: New

Condition: used, Year of construction: 2011, Gyárto: Wittmann tip: W702 Gyártási év: 2011 Csdpsvyhqxefx Aktsri A berendezés teljesen működőképes, megtekinthető és kipróbálható! programozó kezelő nélkül !!

Condition: like new (used), Year of construction: 2022, operating hours: 454 h, load capacity: 1,500 kg, lifting height: 5,400 mm, fuel type: electric, mast type: triplex, construction height: 2,400 mm, Manufacturer + model: ACTIL N 15 S - TTFY Mast: 3F5400 ID: 26064.0363 Credpfxezv R Dce Aktei Cat.: Demo Mast: 3F5400 Lowered height: 2400 mm Lifting height: 5400 mm Capacity: 1500 kg Year: 2022 Hours: 454 hours Capacity: 24v / 775ah Options: DEMO!! MINI forklift - Order picker - Counterbalance stacker (3 in 1!!) - Dual controls - Triplex - FFL mast - Side shift & fork spreader - Tilting fork carriage - Floodlights - 2 x Blue spot lights - With free-lifting forks - SUITABLE for all types of pallets POWER STEERING

Condition: used, Year of construction: 2012, operating hours: 32,200 h, The machine offered is an ENGEL VC 200/40 Tech, manufactured in 2012. The machine is currently connected to the power grid. Technical specifications: Manufacturer: ENGEL Model: victory 200/40 tech Year of manufacture: 2012 Control system: ENGEL CC 200 Operating hours: approx. 32,200 h Clamping force: 400 kN / 40 t Screw diameter: 30 mm Injection pressure: 1,451 bar Displacement: 99 cm³ Platen size: 500 × 450 mm Tool height: 200 mm Opening stroke: 400 mm Max. platen distance: 600 mm Centering: 125 mm Ejector stroke: 100 mm Nozzle thread: M28 × 1.5 Smallest tool size: 280 mm Power: 15 kW Machine weight: approx. 2,900 kg Core pull: 1 Air ejector: 2 RSP: 3-part Design: tie-bar-less ____ Wittmann W702 picker / handling device Manufacturer: Wittmann Type: W702 Year of manufacture: 2012 Serial No.: 0000171976 Article No.: 7F00000506 X-axis: 100 mm Y-axis: 550 mm Z-axis: 90° Weight: approx. 52 kg Voltage: 105–250 V Current consumption: 1.6 A According to the available Wittmann documentation, the handling device has been refurbished. After completion of the work, a functional test and test run were carried out with the result "OK". _____ Cooling unit Manufacturer: aic regloplas GmbH Model: TAE EVO 081 Year of manufacture: 2006 Serial No.: 2200 086 152 Connection: 400 V / 3 Ph / 50 Hz Rated power: 11 kW Max. current consumption: 19 A Protection class: IP54 Max. operating pressure, water circuit: 6 bar Max. water temperature: 65 °C Refrigerant: R407C Refrigerant quantity: 5.5 kg Weight: approx. 331 kg _____ Scope of supply ENGEL victory 200/40 tech injection molding machine Wittmann W702 picker / handling device aic regloplas TAE EVO 081 cooling unit Inspection is possible by appointment. Dismantling and loading are the responsibility of the buyer! The machine is located in Bremen. _____ Crjdpsz Ap Imsfx Aktei Subject to prior sale and errors in technical specifications. The technical specifications have been compiled to the best of our knowledge, but do not constitute guaranteed characteristics. Our general terms and conditions apply; the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial customers and without warranty.

Condition: used, Electric pallet stacker - pedestrian stacker, drawbar stacker for the ergonomic handling of small loads Manufacturer EXPRESSO, Model Lift & Drive 225 (lift2move) Serial No. 19153-HD, Year of manufacture 2010 Type No. Rated load capacity 225 kg Lifting stroke 1770 mm Lifting height 2350 mm Lifting speed (unloaded / loaded) approx. 100 / 75 mm/s Outreach of lifting arm 400 mm Chassis length 1130 mm Ground clearance 90 mm Underrun length 600 mm Chassis design (front / rear) Ø 80 / 150 mm (2 fixed / 2 swivel casters) Overall length 1130 mm Overall width 600 mm Overall height 2450 mm Motor power 400 W Battery capacity 24 V / 16 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Cable remote control with spiral cable and buttons for 2 lifting speeds - Battery pack with quick-change system - Battery charge indicator - 2 lead-acid batteries 12 Volt, 17 Ah installed in the battery pack, battery NEW - External charger 24 VDC, 3 Amperes (mains voltage 230 V, 50 Hz) - Manually movable, swivel casters with three-stage parking brake - Handlebar infinitely adjustable in height Credpfx Ajflt Egsktoi - Load receiving flange according to EXPRESSO standard 380 x 50 mm / 4 mounting holes M10 at a distance of 100-120-100 mm Mounted lifting attachment: Quadruple lifting fork, Expresso type, load capacity of the lifting attachment 40 kg - Lifting attachment can be swivelled by 90° by hand (can only be locked in the 0° position) - Lifting attachment can be moved laterally by +-100 mm on linear guide (locking only in the center) - Width between the support arms 320 mm - Height between the support arms (height can be locked at) 365 / 400 / 450 mm (max. opening width without locking hole 510 mm) - Depth between the support arms 150 mm to the stop bolt / 300 mm maximum Total weight 100 kg Good condition

Condition: good (used), Year of construction: 2008, Wittmann sprue picker Crodpfx Ako Ack Aietji W702 Year of manufacture 2008 X-100 Y-550 Z 45-90°

Condition: excellent (used), Year of construction: 2022, Krauss Maffei KM 50-55 CX hydraulic injection molding machine Year of manufacture: 2022 STAR picker Fully hydraulic clamping system. MC 6 control system based on an industrial computer with real-time Ethernet technology, equipped with an integrated 21.5" control panel with a color touch screen. Plasticizing unit Complete plasticizing unit for thermoplastics with a screw diameter of 18 mm, with a backflow valve and an open nozzle Nozzle radius 10mm, nozzle opening 4mm TECHNICAL DATA OF THE MACHINE IN STANDARD EXECUTION Clamping unit - Clamping force: kN 500 - Opening force: kN 40 - Dimensions of the mounting plate (h x v): mm 600 x 600 - Distance between columns (h x v): mm 370 x 370 - Mold opening stroke: mm 400 Credozhwl Ropfx Aktoi - Minimum mold height: mm 200 - Opening width: mm 600 - Ejector stroke: mm 100 - Ejector force forward/backward: kN 23 / 10 Injection unit - Screw diameter: mm 18 - Ls/D ratio: - 22.2 - Injection pressure: bar 2500 - Injection volume: cm3 20 - Injection shot weight 1): g 19 - Injection speed: mm/s 150 - Injection rate standard: cm3/s 38 - Screw speed, standard: rpm 450 - Plasticizing capacity 1): - at standard screw speed: g/s 4.0 Electrical and hydraulic equipment - Rated power of the pump motor: kW 11 - Installed power of the heaters: kW 3.8 - Number of cylinder heating zones: - 4 - Dry cycle time / stroke according to Euromap 6 2): s/mm 1.2 / 259 - Oil tank capacity: dm3 180 Dimensions and weight - Net weight with control cabinet: t 2.55 - Machine dimensions (l x w x h) 3): m 3.53 x 1.41 x 1.96

Condition: excellent (used), Year of construction: 2020, operating hours: 200 h, ABB IRB360 Picker + IRC5 Compact controller, 2nd generation + TPU, as new Cjdpfx Akoz Taggjtsri DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015 and offers a comprehensive service area for robot maintenance and repair. Over the years, we have evolved into a holistic partner for all matters related to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.