Used Planer Table for sale (17,253)

Condition: like new (used), Year of construction: 2020, For sale is a demonstration machine: Hammer K3Winner Comfort panel saw with a cutting width of 300 mm. The machine was only briefly used for demonstration purposes in-house and can thus be considered as new, with full warranty/guarantee. Gijdey Akdrepfx Aa Aer Technical specifications: - Sliding table 2000 mm - Extension table 1100 mm - Mitre fence 1300 mm - Angle stop index - Saw blade tiltable 90–45° - Max. cutting height 104 mm with 315 mm saw blade diameter - Cutting width 800 mm - 5.5 HP (4 kW) motor, 400 Volt - Year of manufacture: 2020 The panel saw is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: saw, circular saw, Hammer, panel saw, panel Reference: R-D1618-10

Condition: new, table length 1000 mm table width 1000 mm table height 100 mm bore 16 mm weight 200 kg Special offer: Exhibition use – slight scratches on the surface Gijdjyzty Hopfx Aa Aor Features: - Surface holes in a 50x50 mm grid - Holes in the side panels in a diagonal grid - 4 feet – standard configuration 750 mm - Through-hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 – 13 mm - Side panel made of high-quality steel S355J2+N + plasma nitriding - Hole Ø 16 mm - Corners, edges and holes rounded - Side panel height 100 mm - Includes scale markings on the surface - Construction reinforced with ribs - Grid lines enable precise set-ups

Condition: excellent (used), Catalogue number 7640 ADVANTAGES – The best wide planing machine for wet and dry timber – Ideal for processing logs, flooring boards, etc. – 2 planing cutterheads + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used planer, very good condition TECHNICAL SPECIFICATIONS - Max planing width: 610 mm - Max planing height: 200 mm - From above: - Powered feed roller, toothed - Pawls - Pressure mechanism - 2 powered feed rollers, toothed - Pressure mechanism - 610 mm, 6-knife planing cutterhead, 15 kW - Pressure mechanisms - Smooth outfeed roller - From below: - Side pressure at infeed - Guide rail - Infeed table - Powered feed roller, toothed - 610 mm, 6-knife planing cutterhead, 7.5 kW - 2 smooth feed rollers - Side pressure at outfeed - Rear: - 2 side spindles + pressure units: 1) Right vertical spindle 200 mm, 15 kW 2) Left vertical spindle 200 mm, 15 kW - Electrically adjustable left vertical spindle (right/left) - Spindle diameter: 40 mm - Alternate spindle settings - Spindles adjustable: up/down, right/left 3) Additional lower horizontal spindle 160 mm, adjustable up/down and right/left, 5.5 kW - Spindle diameter: 35 mm - At outfeed: 2 upper metal sliding rollers, 2 lower powered rubber rollers - Adjustable rollers in the lower table - Electric height adjustment for planing - 6 feed speeds: 12.8 / 16.3 / 20 / 25.6 / 32.6 / 40 m/min - Feed motor: 8 kW - Extraction port diameters: 2×120, 2x160 mm - Dimensions (LxWxH): 2980 x 1980 x 1800 mm - Weight: approx. 3500 kg Net price: 66,900 PLN Net price: 15,920 EUR (depending on 4.2 EUR rate) (Prices may change with significant exchange rate fluctuations) Gjdpfx Asyaq Taja Aeir

Condition: excellent (used), CATALOG NUMBER 7909 TECHNICAL DATA - Max. workpiece width: 230 mm - Max. workpiece height: 130 mm Giedpfoynktcox Aa Aer - 6 spindles: 1) Bottom horizontal, 230 mm, 4 kW 2) Right vertical, 130 mm 3) Left vertical, 130 mm (spindles 2 & 3), 7.5 kW 4) Top horizontal, 230 mm, pneumatically adjustable front/rear, 5.5 kW, electrically adjustable up/down 5) Bottom horizontal, 230 mm, 4 kW 6) Trimming saw, pneumatically adjustable up/down, right/left, 2.2 kW - Saw blade diameter: 160 x 40 mm - All spindles adjustable up/down, right/left - All spindles equipped with electric brake - Spindle diameter: 40 mm - From above: 4 infeed traction rollers, gear-toothed including 2 double rollers - From above: 3 outfeed traction rollers, rubber, smooth, including 1 double roller - From below: rubber traction roller, double - Feed by Cardan shaft rollers - Rollers pneumatically pressed - Infinitely variable feed speed up to 25 m/min - Feed motor: 2.2 kW - Working pressure: 6-10 bar - Electric thickness adjustment - Central table lubrication - Infeed table length: 1980 mm - Extraction port diameter: 5 x 140 mm, 1 x 80 mm - Dimensions (L x W x H): 4000 x 1800 x 1700 mm - Weight approx. 3,500 kg ADVANTAGES – German-made, WEINIG brand – 5-head configuration – Operator’s manual (DTR documentation) – 6th spindle is a pneumatically adjustable trimming saw – Planer in ideal, very good condition Net price: 53,900 PLN Net price: 12,840 EUR Net price calculated at 4.2 PLN/EUR exchange rate (Price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 6393 TECHNICAL DATA - Maximum workpiece width: 200 mm - Maximum workpiece height: 150 mm - Number of spindles: 4: 1) Bottom horizontal, 200 mm, 5.5 kW 2) Right vertical, 150 mm, 4 kW 3) Left vertical, 150 mm, 4 kW 4) Top horizontal, 200 mm, 5.5 kW - All cutterheads adjustable vertically and horizontally - Spindle diameter: 40 mm - Spindle speed: 6,000 rpm From above: - 6 feed-in traction rollers, toothed (including 2 double) - 1 feed-out traction roller, rubber-coated From below: - Feed-in drive roller, toothed, steering, integrated in lower table - 3 side pressure rollers - Feed-out traction roller, metal, smooth - All rollers pneumatically loaded - Infeed table length: 2,130 mm - Height-adjustable table - Centralized lubrication system - Electric adjustment of planing thickness - Lift motor: 1.1 kW - Stepless feed speed control via inverter - Feed drive motor: 3 kW - Feed via Cardan shafts - Fully enclosed in cabin - Extraction port diameters: 4 x 130 mm - Dimensions (LxWxH): 3,550 x 1,750 x 1,800 mm - Approx. weight: 3,000 kg Gisdpfxeymnqce Aa Aer ADVANTAGES – Equipped with 4 cutterheads – Ideal for wet and dry timber – DTR operation and maintenance manual included – Used machine, very good condition Net price: 65,900 PLN Net price: 15,690 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7914 TECHNICAL DATA - shaft width: 640mm - number of knives: 4 pcs - max thickness of processed element: 250mm – top side: - anti-kickback fingers/rejectors - toothed feed roller, driven - pressure unit - planing shaft - pressure unit - smooth outfeed roller, driven – underside: - adjustable rollers in the lower table: 2 pcs - main motor: 7.5kW - electric table lift - lifting motor: 1.1kW - 2 feed speeds - feed motor: 1.3kW - dimensions (L/W/H): 1130x1300x1200mm - weight: 1026kg ADVANTAGES – made by Polish brand JAROMA – electric table height adjustment – DTR documentation provided – used thickness planer, in very good condition Net price: 16900 PLN Gjdpfx Aeyrr A Hja Aoir Net price: 4030 EUR (at an exchange rate of 4.2 EUR) (Prices may change with larger rate fluctuations)

Condition: excellent (used), CATALOGUE NO. 7916 TECHNICAL DETAILS - Working width: 510 mm - Number of knives: 4 pcs - Max thickness of workpiece: 300 mm – From above: - Kickback pawls Gijdpoyrrruofx Aa Asr - Gear-driven, pull-in, oscillating feed roller - Pressure bar - Planing cutterblock - Pressure bar - Smooth, driven outfeed roller – From below: - Adjustable feed roller in the lower table, 1 pc - Motor power: 6.8 kW - Electric table lift - 4 feed speeds: 5 / 10 / 15 / 20 m/min - Extraction port diameter: 170 mm - Dimensions (L/W/H): 1120 x 1000 x 1100 mm – weight: 650 kg ADVANTAGES – Manufactured by the Italian brand CASADEI – Max planing height: 300 mm – electric table lift – One powered roller installed in the table supports machine feed – Thickness planer used, in very good condition Net price: 17,900 PLN Net price: 4,260 EUR (at a rate of 4.2 PLN/EUR) (Prices may vary depending on further currency fluctuations)

Condition: excellent (used), Year of construction: 1982, Used Noble & Lund Double Column Plano Milling machine model P/RLMA with vertical milling head and planing head. Serial #6344P Year of manufacture: October 1982. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION TABLE WORKING AREA 5’-0 x 16’ 0”( 1524mm x 4876mm) Gjdpfx Ash U Nvksa Asir MAX COMPONENT HEIGHT 5’0 (1524 mm) DISTANCE BETWEEN COLUMNS 6’1” (1866mm) MAX. WEIGHT OF WORKPIECE 15000kgs RAM TRAVEL 4’0”(914mm) RAM SECTION 14” x 14”(355 x 355 mm) SPINDLE TAPER ISO 50 MILLING SPINDLE MOTOR 40HP (30Kw) MILLING FEED RATES / MIN 1”-48”/MIN( 25-1200MM/MIN) PLANING MOTOR 40HP(30 Kw) MILLING SPINDLE SPEEDS 7-835 RPM ELECTRICAL SUPPLY 415V 3Ph 50Hz LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 42000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: excellent (used), Ex University, used Anti-vibration table 750mm x 750mm Godpfxoyt N Sbj Aa Aeir

Condition: like new (used), Year of construction: 2014, functionality: fully functional, UNUSED GSA T320 CNC Tilting and rotating table. Full specification on request. Item in new condition having never been used. Available now.. Gedpfx Aasxy Iq Uo Aeir Contact us for further information.

Condition: excellent (used), Normal drilling capacity 20 mm Continuous drilling capacity in St 60-2 / E 335 18 mm Spindle holder MK 2 10 spindle speeds 240 - 3800 rpm. Drilling depth 100 mm Projection 215 mm distance spindle/table up to 360 mm distance spindle/base plate 560 mm table surface 350 x 290 mm Column diameter 75 mm Motor pole-changing 0.6/1.2 kW Total height 1050 mm Weight 100 kg Gjdpfx Aasfzbkho Asir Today's new price: 4.022,00 € net Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D-44143 Dortmund - Wambel

Condition: used, Year of construction: 1997, Beam planer 260 x 160 mm, trailing chamfer unit on the upper spindle, air cushion table with two-axis control for left and upper spindle, factory-new control system (latest Weinig version) Max. working width: 260 mm Max. working height: 160 mm Number of spindles: 6 1st spindle: bottom, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 2nd spindle: right, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm, motor power 11.0 kW (shared motor with left spindle) 3rd spindle: left, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm 4th spindle: top, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 5th spindle: bottom, spindle diameter 40 mm, motor power 11.0 kW, speed 6000 rpm, clamping length 270 mm 6th spindle: top, chamfering unit Motor brakes: mechanical Height adjustment of upper spindle: electric Optionally with/without feed Feed brake system: Yes Feed speed infinitely variable up to: 3 – 23 m/min Feed roller pressure: pneumatic Feed power: 4.0 kW Feed drive: cardan Lubricant pump: manual Max. planing depth: 10 mm Jointing cutter on jointer: Yes Powered rollers in table: 1 Control type: PLC control Spindle position display: mechanical numerical display Infeed rollers before jointer: Yes Air cushion table: triple track Central lubrication point: Yes Description: short infeed table 1050 mm with internal lighting Gijdpfx Aaewwwkhe Asr Location: Nattheim

Condition: used, table diameter 160 mm chucking diameter 160 mm positive location each 15 ° weight 31 kg dimensions of the machine ca. 400 x 300 x 150 mm - Chuck with 15° indexing - Counter jaws - Chuck key Giedoukiqwjpfx Aa Ajr

Condition: used, table diameter 500 mm table load capacity 420 kg table height 185 mm Gijdsr Htvnspfx Aa Aer centre height 315 mm center hole MK 5 mm indexing 15 ° weight 275 kg dimensions of the machine ca. 600 x 850 x 200 m Rotary table in excellent condition for for horizontal and vertical use. - Serial No.: P56030 - for vertical or horizontal use - Indexing every 15° or continiously variable by clamping - mech. Hand wheel with scale - Center bore taper MT 5 - Hand Lever with 3x indexing discs

Condition: used, Year of construction: 1971, table diameter 250 mm table height 100 mm 4-jaw-chuck diameter 200 mm weight 60 kg dimensions of the machine ca. 370 x 500 x 210 mm - Serial-No.: 6568 - 4-jaw chuck RÖHM Ø 200 mm - Chuck optionally with 30° pitch, or Gijdpfxjtn Envo Aa Asr infinitely variable 360° rotation - Chuck key

Condition: used, functionality: unexamined, Ferwood Code: AGG0213 - Manufacturer Code: 1-056-09-3351 - Condition: Used - Functionality: Not tested - Compatible Machine: - Weight: 8 kg - Dimensions: 46x39x27 cm - If interested, we offer an overhaul service. Please contact us. Gedpoyztt Hefx Aa Aoir

Condition: used, Year of construction: 2017, x-travel 5850 mm y-travel 2500 mm z-travel 1000 mm Control 840D sl feeds x- + y-axis 20 m/min feeds z-axis 20 m/min acceleration 5 m/qs spindle drive - main spindle 60 kW spindle turning speed - stepless 24.000 U/min max. torque on the working spindle 87 Nm tool taper HSK-A63/F80 c-axis +/- 360 grad a- axis +/- 100 grad tool changer 20 stück coolant tank 2300 l surface area 6.000*2.500 mm number of T-slots 18 flute distance 125 mm dimensions of the machine ca. 14,8x7,3x5,8 m Machine table Width 2,500 mm Length 6,000 mm Number of T-slots 20 Distance of T-slots 125 mm Dimensions of T-slots 18H8 mm Max. table load 8,000 kg Travels Cross rail: X axis 5,850 mm Cross slide: Y axis, horizontal 2,500 mm Z axis, vertical 1,000 mm Feeds X-, Y- and Z-axes Feed rate 20 m/min Rapid traverse rate 45 m/min Acceleration 5 m/s² Vertical Slide Cross section 560x420 mm Motor spindle Drive power S1 (100% ED) 60 kW Max. speed 24,000 rpm Max. torque 87 Nm Tool interface HSK-A63/F80 C-axis Swivel range ±360 degree Feed 50 min-1 Acceleration 50 rad/s² Holding torque 1,400 Nm Clamping torque 4,000 Nm A-axis Swivel range ±100 degree Feed 50 min-1 Acceleration 50 rad/s² Holding torque 1,400 Nm Clamping torque 4,000 Nm Godpfxeycln Do Aa Aoir Total dimensions Length 14,800 mm Width 7,300 mm Height 5,800 mm

Condition: excellent (used), Planer-thicknesser KNAPP AD 410 Profi T - used - WIGO cutter block, ground cast iron tables, joint opening tables opening simultaneously, table opening to the rear, infinite feed speed adjustment ----- Technical data ----- Planing width: 410 mm, Gisdeymn Eyjpfx Aa Aer table length: 1,700 mm, number of knives: 3, tilting range of fence: 45°, clearance height: 230 mm, feed speed: 6-12 m/min, extraction port: 120 mm, motor power: 4 kW, weight: 460 kg Quality info: - Joint tables adjusted - Infeed and outfeed rollers checked and adjusted - Table guides checked/adjusted - Complete basic inspection - Complete cleaning - Electrical system checked - Immediately ready for use

Condition: used, machine/vehicle number: 008356, X axis working area: 3650 mm Y axis working area: 1560 mm Working Table: Flat table Giodpfxox Swf Ie Aa Aer Main Electrospindle power: 13 KW Number of controlled axes: 4 axes Total number of drilling spindles: 18 Total number of tool changer positions: 26

Condition: good (used), Year of construction: 2002, functionality: fully functional, Initial commissioning: 2002 Control: Heidenhain iTNC530 Machine hours: to follow X-axis: approx. 6,000 mm Y-axis: approx. 3,500 mm Z-axis: approx. 1,100 mm Gjdpfeyzz R Hsx Aa Asir A-axis: C-axis: 2-axis milling head Spindle speed: max. 14,000 rpm Additional equipment - Double-sided enclosure Machine condition Fully functional, in very good condition. Machine remains powered and is available immediately.

Condition: used, Used machine Year of manufacture: 2004 Features and technical specifications: - Operating hours: 5000 - Planing width: 230 mm - Planing height: 120 mm - Number of spindles: 6 - Bottom spindles: 2 - Right spindle: 1 - Left spindle: 1 - Top spindles: 2 - Spindle arrangement: bottom / right / left / top / top / bottom - Motor power in kW: 11 / 7.5 / 7.5 / 11 / 11 / 11 - Maximum spindle speed: 6,800 rpm - Spindle diameter: 40 mm - Feed rate: max. 30 m/min - Feed: variable - Feed motor: 4 kW - Main drive motor: 11 kW - Pre-planing cutterhead - Table surface chromed - Infeed table length: 2,000 mm - Driven table rollers - Lubrication pump: manual - Top pressure: pneumatic - Drive: Cardan shaft feed rollers Gijdsyxyauepfx Aa Aor - Total installed power: 80 kW - Dimensions: 4,100 x 2,050 x 1,900 mm The machine is offered without tooling; used tooling can also be sourced on request. Availability: approx. mid/end of April Location: Netherlands

Condition: new, ZEATZ NC Rotary Tables PHV Series – Available for Immediate Delivery The ZEATZ NC rotary tables in the PHV series represent top precision, stability, and flexibility for modern machining applications. Ideal for positioning, rotary, and simultaneous machining processes across a wide range of applications. Your key benefits at a glance: ✔ Seamless integration into existing machines (HEIDENHAIN / SIEMENS) ✔ Service & technical support provided directly by JMT ✔ Custom configurations and tailored solutions ✔ High load capacity for heavy workpieces Why ZEATZ: ZEATZ stands for innovative NC rotary table solutions offering highest precision and reliability. Giodpfx Aom Tvz Dja Aer Thanks to their robust construction, backlash-free drive systems, and state-of-the-art control technology, these rotary tables are ideally suited for demanding machining tasks. Technical specifications: Working position: Vertical / Horizontal Applications: Positioning Infinitely variable rotation Interpolated machining Sizes: Table diameter: 500 / 600 / 800 / 1,000 / 1,200 mm (square clamping surfaces also available upon request) Max. workpiece weight: Horizontal: up to 20,000 kg Vertical: up to 4,000 kg Positioning accuracy: ± 3 arcseconds Integration: Compatible with HEIDENHAIN and SIEMENS controls Your advantages as a JMT customer: ✔ Official distribution partner for ZEATZ in Germany ✔ On-site technical support and service ✔ Fast spare parts supply ✔ Assistance with integration and commissioning ✔ Reference projects available throughout Germany Contact us – we will be happy to advise you and prepare a tailored quotation for your needs.

Condition: excellent (used), Surface planer Brake motor Undervoltage release Emergency stop NEW motor Various NEW switches CE compliant Total table length: 2900 mm Infeed table length: 1550 mm Outfeed table length: 1310 mm Working width: 430 mm Working height: 800 mm Cutterblock diameter: 120 mm Cutterblock speed: 5000 rpm Number of knives: 4 Knife dimensions: 430 × 35 × 3 mm Rabbeting depth: 20 mm Planer fence L × H = 1000 × 180 mm Fence tiltable up to 45 degrees Motor power: 3.2 kW, 400 V, 50 Hz Gedpfx Aaeyrflno Aeir Dimensions L × W × H: 2900 × 700 × 960 mm Weight: 475 kg

Condition: new, Massive work table made of heavily ribbed cast iron Robust base frame constructed from welded steel Precision sliding table made of anodized aluminum Carbide guideways – for long-term precision and minimal maintenance of the sliding carriage Tilting cast iron saw unit with double segment guide Heavy-duty parallel fence with round bar guidance Integrated mitre cutting device on the sliding table Scoring unit with its own powerful drive motor (optional) Equipped with a high-quality panel frame & telescopic stop, integrated roller, inclined scale, and practical eccentric clamp Saw blade speed adjustable in two steps (from above, table insert removable) Includes pendulum blade guard INCLUDES OPTIONAL DIGITAL DISPLAY FOR PARALLEL FENCE Max. cutting height at 90° (mm): 140 with 400 mm blade Max. cutting height at 45° (mm): 100 with 400 mm blade Saw blade tilting range (degrees): 90/46° Gisdpsit I Sbefx Aa Asr Manual saw blade lifting and tilting Saw blade speed (rpm): 3,500 / 5,000 Main motor power (kW) 50 Hz: 7.5 Scoring unit motor power (kW) 50 Hz: 1.3 Scoring unit speed (rpm): 9,200 Panel cutting capacity (mm): 3,200 x 3,200 Cutting width for parallel cuts (mm): 1,270 Extraction port diameter (mm): 120, 60

Condition: new, ZEATZ PHL Linear Rotary Tables – Short Delivery Times for Turning and Sliding Tables The ZEATZ PHL Linear Series combines high-precision rotary table technology with an integrated linear axis, offering maximum flexibility for complex machining tasks. Ideal for positioning, simultaneous turning, and interpolation machining of large and heavy workpieces. Your Benefits at a Glance: ✔ Combination of rotary table and linear axis in a single unit ✔ Seamless integration into existing machines (HEIDENHAIN / SIEMENS) ✔ Service and technical support directly through JMT ✔ Custom configurations and customer-specific solutions Why ZEATZ: ZEATZ stands for high-precision NC rotary tables and innovative solutions for demanding machining applications. With a robust design, backlash-free drive systems, and state-of-the-art control technology, these systems are the perfect fit for heavy-duty cutting operations and the highest precision requirements. Technical Specifications: Applications: • Positioning • Simultaneous turning • Interpolation machining Table sizes: 1,000 x 1,000 mm 1,200 x 1,200 mm 1,500 x 1,500 mm 1,800 x 1,800 mm 2,000 x 2,000 mm 2,500 x 2,500 mm 3,000 x 3,000 mm 3,500 x 3,500 mm 4,000 x 4,000 mm (Round clamping surfaces also available) Max. workpiece weight: approx. 6,000 to 80,000 kg Linear axis: Gsdpfxsm Tv Aze Aa Ajir Optional integrated sliding axis Travel: approx. 1,000 to 3,000 mm (in 500 mm increments) Positioning accuracy: ± 5 arc seconds Integration: Compatible with HEIDENHAIN and SIEMENS controls Your Advantages as a JMT Customer: ✔ Official sales partner for ZEATZ in Germany ✔ On-site technical support and service ✔ Rapid spare parts supply ✔ Assistance with integration and commissioning ✔ Reference projects available in Germany Contact us – we will be happy to advise you and provide you with a custom quotation.