Used Plasma Cutting Tools for sale (42,521)

Condition: good (used), Year of construction: 2008, functionality: fully functional, Fully operational plasma cutting machine in very good condition. MicroStep PLS 7501.25PG Equipped with two torches: plasma and gas. Gsdpfxewinpxo Ahnjbn Power source: Hypertherm, HyPerformance Plasma HPR260. Cuts mild steel and stainless steel. Table dimensions: 7.5 m x 2.5 m. The machine can be inspected under power in Vilnius.

Condition: used, Year of construction: 2014, ■ V304 plate cutting machine capable of processing plates up to 1.500mm x 3.000mm ■ V304 plate processing machine (including gantry beam 2.500mm and side trucks) ■ X-rail (5.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ■ Plasma cutting and extraction table (1.600mm x 3.090mm, 1 pcs) ■ Plasma cutting unit Kjellberg HiFocus280i (1 pcs) ■ Torch suspension for plasma cutting unit (including IHT M4000 PCS automatic height control) ■ Carriage for cutting unit (motor driven, including laser pointer, 1 pcs) ■ Kemper fume extraction unit 81 0550 090 (including spark trap 1 pcs) Gjdoy E Nykspfx Ahnjbn ■ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module) ■ Safety devices (safety bumpers, emergency stop cord) Technical specifications PLASMA CUTTING UNIT HIFOCUS 280i Material Mild steel, stainless steel, aluminum Min. thickness 3 mm Max. thickness 70 mm Max. pierce capacity 40 mm Dross-free cutting max. 35 mm Automatic height setting Yes, IHT M4000 PCS Marking lines Yes, with same consumables Plasma gas mild steel Cutting O2 (99,9% pure clean, dry, oil-free) Marking Argon gas Shield gas mild steel O2 / air (99,9% pure clean, dry, oil-free) Automatic gas console Yes Cutting speed mild steel 6 mm Approx. 4.100 mm / min 90A 12 mm Approx. 3.200 mm / min 160A 25 mm Approx. 2.000 mm / min 280A 40 mm Approx. 720 mm / min 280A 50 mm Approx. 400 mm / min 280A 70 mm Approx. 150 mm / min 280A * Grounding max. 6m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes. COLOUR Plates RAL 3003 Red Frames RAL 7011 Grey GENERAL INFORMATION Working height 700 mm (+/- 20 mm) Voltage stabilizer Not included Ambient temperature 0 – 35°C max. 95% relative humidity

Condition: used, Year of construction: 2014, functionality: fully functional, ■ Infeed roller conveyor (length 6m, width 2000mm, roll diameter 159mm, roll distance 800mm, capacity 1250kg/m, including liftable datum line) ■ V320-2000 Plate processing system (base frame with vertical drilling unit, automatic tool changer and automatic discharge table) ■ Feeder trucks (servo driven, master truck with 3 hydraulic clamps, support truck with 2 hydraulic clamps) ■ Swarf brush (automatic swarf removal after drilling operations) Gsdpfey E Nxgox Ahnebn ■ Oxy-fuel cutting torch (1 pcs, with automatic height control IHT M4000 Cap) ■ Plasma cutting unit Hypertherm HPR260XD (1 pcs, automatic gas console, complete with cutting parameter database) ■ Fume extraction unit Donaldson DFPRO6 ■ Product conveyor belt ■ Outfeed roller conveyor (length 3m, width 2000mm, roll diameter 159mm, capacity 1250kg/m) ■ Hardware and software (including VACAM ‘Machine Edition’, VACAM ‘Office Edition’) ■ Safety devices (safety fencing, light curtain, light curtain muting) ■ Year of construction 2014 Technical specifications Operating range V320-3000 Min. / max. plate length 850 – 6.100 mm Min. / max. plate width 200 – 2.050 mm Min. / max. plate thickness 6 – 75 mm Max. capacity 7.500 kg Material Mild steel Drilling unit VD40 Automatic tool changer 10 positions Feed Synchronous driven servomotor, servo-inverter Spindel rpm Step less 0 – 2.500 rpm (servomotor) Nominal power 30 kW Lubrication Internal and external by mist of air / oil Tool holder SK 40 Drill diameter 5 – 40 mm Thread tapping M6 – M24 Centre point marking possibility Yes Countersinking possibility Yes Layout marking possibility Yes Hydraulic clamping Yes Plasma cutting unit HPR260XD Max. thickness 64 mm Max. pierce capacity 38 mm Dross-free cutting max. 32 mm Marking Yes, with same consumables Plasma gas mild steel Cutting O2 (99,9% pure clean, dry, oil-free) Marking Argon gas Shield gas mild steel O2 / Air (99,9% pure clean, dry, oil-free) Cutting speed 6 mm Approx. 4.035 mm / min 130A 12 mm Approx. 3.060 mm / min 200A 25 mm Approx. 1.660 mm / min 260A 50 mm Approx. 590 mm / min 260A 64 mm Approx. 195 mm / min 260A * Grounding max. 6 m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes. Oxy-fuel cutting unit Type Nozzle mix Automatic height setting Yes Gas supply Magnetic valve with back-fire protection Ignition Automatically Max. thickness 75 mm Gas Propane Optional gas Acetylene Cutting gas O2 Operating direction From left to right General information Voltage stabilizer Not included Current Transformer Not included Ambient temperature 0 – 35°C max. 95% relative humidity Working height 760 mm (+/- 25 mm)

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2202, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, type of input current: three-phase, input voltage: 400 V, input current: 50 A, Microstep Mastercut Eco Plus 3001.15 Year of manufacture: 2017 Control system: IMSNC Oxy-fuel cutting table: 3000 x 1500 mm Extraction duct left / right Plasma source: Kjellberg HiFocus 161i, adjustable 10 - 160 A Power source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control • Optimal process control with ultra-fast regulation of cutting current • Process monitoring for torch cooling, ignition time, pilot arc time, short circuit time during torch ignition, and power source • Operating status and error display via LED and screen • Analog and serial interfaces for adaptation to CNC controllers • Infinitely adjustable cutting current from 10 - 160 A and during marking from 5 - 25 A • Optimal piercing through infinitely variable delay time for the main arc and adjustable current rise • Adjustable current reduction for cornering, start, and end signals of the guidance system • Automatic display of the preset cutting current • Serial data transmission for PC-based diagnostics Gjdpfx Ahoy Nd Hysnobn Plasma cutting technology: Contour Cut • Further development of HiFocus technology for mild steel • Optimized for cutting fine internal and external contours • High cutting quality and contour accuracy • Holes with angular deviations according to DIN EN ISO 9013 range 2-4 • Minimal angular deviations and smooth cut surfaces • Excellent repeatability and dimensional accuracy • No tedious post-processing – high productivity and low costs • No additional equipment, software, or new consumables required • Standard equipment Plasma torch PerCut 200/210 • PerCut 200 plasma machine torch for standard applications and high-precision bevel cutting • Quick-change PerCut 210 torch with threaded lock for quick and convenient tool swapping • Special torches available for special applications • Higher cutting speeds reduce cost per meter • Long service life of consumables conserves resources • Narrower kerf means fewer emissions and less waste • Significantly lower gas consumption compared to competitors thanks to efficient liquid cooling up to the nozzle tip • Lower noise levels due to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking possible with the same consumables Power source HiFocus 161i Power supply: 400 V; 3 Ph; 50 Hz Max. power input: 28 kVA (100% duty cycle) Main fuse, slow-blow: 50 A Protection class: IP22 Open circuit voltage: 330 V Cutting current: 10 – 160 A (100% duty cycle) Marking current: 5 – 25 A (100% duty cycle) Cutting range: Max. 50 mm Recommended: 0.5 – 38 mm Max. piercing thickness: 30 mm Weight: 206 kg Plasma machine torch PerCut 200 Quick-change torch PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, Air, N2/H2 (F5)

Condition: like new (used), Year of construction: 2025, functionality: fully functional, workpiece weight (max.): 4,000 kg, table length: 14,000 mm, Equipment: documentation/manual, FOR SALE: Voortman MO Compact 900 — 6-Axis CNC Pipe Plasma Cutting Machine (2025) Manufacturer: Voortman Steel Machinery / Müller Opladen GmbH Model: MO Compact 900 Commissioned: 2025 Condition: Demo machine — less than 200 production hours, essentially as-new Type: CNC plasma pipe profiling machine (6-axis) Category: Plasma cutter / Pipe cutting machine Machine description: This Voortman MO Compact 900 is a state-of-the-art 6-axis CNC pipe cutting machine capable of processing round pipes with diameters up to 914 mm and lengths up to 12,000 mm, with wall thicknesses between 3 and 50 mm. Installed in 2025 in Belgium, this machine has less than 200 running hours, making it virtually new but available at a pre-owned price point. The 6th CNC axis ensures a constant torch-to-material distance for perfect weld preparations and bevel cuts up to ±45°. The proprietary 3D Azimuth cutting head offers torch adjustment of ±60° and 380° rotation, allowing highly accurate contour cutting for any pipe geometry. Included equipment: — Voortman MO Compact 900 pipe profiling machine (6 CNC axes with x-rail, truck, column, and cutting unit) — Hypertherm MAXPRO200 plasma source (200 A, 100% duty cycle, manual gas console) — 3D Azimuth cutting head with intelligent torch positioning for x-, y-, and v-bevel weld preparations — Electromechanical tracer arm for continuous pipe circularity measurement — Self-centering three-jaw chuck (1,200 Nm torque) — Pipe conveyor system on rails — Dual-point fume extraction (at cutting head and through the chuck) — Voortman Filter Unit ECO6/HCS with Donaldson Ultra-Web® cartridge technology and spark arrestor — Electrical cabinet with CNC unit, PLC, IP54 protection, and power buffer — Industrial PC with 22” touchscreen and mobile control panel — All safety devices (CE certified to 2006/42/CE and 2004/108/CE standards) — Complete technical documentation, operator manuals, and installation drawings Key specifications: — Clamping diameter range: 50 – 914 mm — Max pipe length: 12,000 mm — Max pipe weight: 4,000 kg (with pipe carriages) — Plasma bevel angle: +45° / −45° — Cutting capacity: 3 – 50 mm (mild steel) — Pierce capacity: 32 mm — Chuck rotation speed: 0 – 10 rpm — Torch carriage speed: 0 – 15,000 mm/min — Installation dimensions: 7.0 × 4.0 × 4.0 m — Machine weight: 6,000 kg Important: COROBS machine control software licenses are not included and must be obtained separately from Voortman. Voortman offers professional reinstallation, commissioning, operator training, and maintenance contracts at the buyer's site. Why choose this machine? A new MO Compact 900 currently costs over EUR 350,000 and comes with a 6–12 month delivery time. This unit delivers identical capabilities, is immediately available, and represents significant savings. Full OEM support from Voortman is available to the buyer. Gjdpfey H I Trox Ahnjbn Location: Belgium (inspection by appointment) Delivery: Ex-works. Dismantling and transport subject to agreement. For questions or further information, please send us a message or call.

Condition: ready for operation (used), Year of construction: 2018, This KERF RUM 2500P plasma cutting machine was manufactured in 2018. It features a large cutting area of 15000mm x 2000mm and is equipped with two bridges, each with 275amp plasma. Full history from the manufacturer is available. Contact us for more information about this machine. Application Types Gbedpfx Ahsx Hbkqensn Cutting

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, CNC Plasma Cutting System 6000x3000 mm – EPL 3060 ERMAKSAN 5 AXES – Hypertherm XPR300 with OPTIMIX – Bevel Unit YEAR OF MANUFACTURE: 2024 The machine was newly sold at the end of 2024 and is being offered for sale due to the company’s insolvency. The photos in the listing were taken during the commissioning phase; current photos will be provided at a later date. CNC Plasma Cutting System • Machine type: CNC plasma cutting table • Condition: Used – in good operating condition • Availability: Immediately available Working Area • Cutting table size: approx. 6000 × 3000 mm Plasma System • Plasma power source: Hypertherm XPR300 High-definition plasma system for precise and fast cutting of mild steel, stainless steel, and aluminum. Features • Bevel unit: BEVEL-R (5-axis bevel cutting system) for weld seam preparation and bevel cuts Extraction System Gbedpfx Aey Ipb Tjhnsn • Sturdy, industrial gantry construction • High precision and productivity • Bevel cutting capability for complex parts

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, operating hours: 240 h, control type: CNC control, controller manufacturer: Hypertherm, controller model: Edge Connect TC, sheet thickness steel (max.): 40 mm, working length: 3,000 mm, working width: 1,500 mm, positioning accuracy: 0.05 mm, repeat accuracy: 0.05 mm, workpiece weight (max.): 5,000 kg, warranty duration: 12 months, Used Esprit Automation CNC Plasma – High Definition XPR170 This Esprit Automation CNC plasma cutting system is presented in exceptional, near-new condition with less than 300 operating hours. Built for precision and reliability, this machine is equipped with a Hypertherm XPR170 high-definition plasma system, delivering superior cut quality and performance across a wide range of materials. Key Specifications: Cutting Area: 3000 x 1500 mm Godpfxjyzuw To Ahnobn Plasma Source: Hypertherm XPR170 (High Definition) Gas System: VWI Gas Module Included Piercing Capacity: Up to 40 mm Mild Steel Operating Hours: < 300 hours Condition: The machine is in pristine condition, having seen minimal use in a controlled environment. Fully maintained and ready for immediate operation. Additional Information: 12-month parts warranty included Ideal for high-precision fabrication, engineering, and production environments Excellent opportunity to acquire a premium CNC plasma system at a fraction of new cost

Condition: used, Graver grinder PARPAS type AU make no. 854/36 year of construction 1971 grinding wheel diameter 100 mm grinding spindle speed approx. 3500 rpm. motor power approx. 0,55 kW Mains connection 380 Volt, 50 Hz - collet chuck (system DECKEL with S20x2) - collet chuck Ø 15,0 mm Gbjdodzp T Tepfx Ahnsn - Diamond grinding wheel dresser for grinding wheel end face Space requirement L x W x H 700 x 350 x 450 mm weight approx. 80 kg good condition

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: HYFRA TYPE, CNC laser cutting machine Lasercomb, model MTL1510, 400V, year of manufacture 2000, machine dimensions 276 x 196 x 215 cm high (control panel), cooling unit Hyfra type VWK904-S, year of manufacture 2000, 84 x 82 x 143 cm high, currently dismantled. Godpfxjy D Ilps Ahnsbn

Year of construction: 1980, condition: good (used), Device number: 2 002 Gbodpfxehk El Tj Ahnon Welding current at 100 % ED: 80 Amp Connection: 18 kVA Cooling type: forced cooling Equipment: hose package for connection; burning device; mobile Dimensions: 1.000 x 700 x 1.000 mm Weight: 0,3 t

Condition: good (used), Cutting range, internal thread: M 2 - M 12 Working radius approx.: 1650 mm Gjdpfxjd D U T He Ahnjbn

Condition: excellent (used), machine/vehicle number: 02 P 0587, cutting circuit: 15 - 40 A electrical connection: 230 V, 16 A kW Gsdpjdyy Diefx Ahnobn space needed: 470 x 250 x 250 mm weight: 10 kg

Year of construction: 1985, condition: used, machine/vehicle number: 60802 A 17983 J, cutting circuit: bis 400 A Godpfe Sdrfsx Ahnobn space needed: 820 x 1220 x 930 mm weight: 750 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2000x1960x1470 mm Weight 900 kg Gbedpovz Ez Rofx Ahnon Total power requirement 8,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3200x1960x1470 mm Gsdpfx Ahjvz E Aujnsbn Weight 1000 kg Total power requirement 8,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3700x2400x1470 mm Weight 1500 kg Gjdpfx Asvz E A Iehnsbn Total power requirement 8,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3200x1960x1470 mm Weight 1000 kg Total power requirement 8,5 kw Gjdpfx Aovz E Azohnobn

Condition: like new (used), Year of construction: 2025, operating hours: 32 h, functionality: fully functional, type of input current: three-phase, working range: 4,000 mm, sheet thickness steel (max.): 50 mm, overall weight: 3,000 kg, total width: 2,700 mm, total length: 5,000 mm, workpiece weight (max.): 5,000 kg, Equipment: documentation/manual, Demonstration machine with large spare wear parts package for sale. Cutting table 4x2m and 300A XPR High Definition water-cooled Hypertherm power source. Core Plus mixed-gas console. True Hole function bolt guarantee —> Hole diameter equals material thickness (e.g. 20mm hole in 20mm plate). Top cutting results thanks to HD cutting technology. Very reliable and extremely user-friendly machine. Remote access and operation via office PC or smartphone possible, CAM software on board. Gjdpfoygczpsx Ahnobn - only 26 cutting hours - Includes approx. €3,000 (net) worth of wear parts - Includes 3 quick-change heads, HD water-cooled, price per piece approx. €1,500 (net) - Piercing up to 50mm with Argon Assist - Cuts up to 80mm in mild steel - Includes comprehensive training at our premises - Dismantling and loading included - 4-year manufacturer’s warranty - New price: €135,000 (net) Freight and installation available as separate offer.

Year of construction: 2018, condition: excellent (used), functionality: fully functional, feed length X-axis: 6,000 mm, feed length Y-axis: 2,000 mm, load hours: 9,635 h, sheet thickness steel (max.): 20 mm, type of input current: three-phase, machine/vehicle number: 541, Equipment: documentation/manual, For sale: Stigal Dynamic plasma cutting machine, year 2018, table size 2 x 6 m. The machine is in very good condition and fully operational, equipped with: - CNC control system - HS Plasma Torch Carrier (Z-axis speed: 165 mm/s) - Voltage-controlled torch height regulator - Dynamic material detection system - Vertical anti-collision system - Automatic UV screen - CAD/CAM software Gedpsy Exfcjfx Ahnebn - Segmented extraction table with zone control - Roller guide for thin sheet metal - CEBORA PROF 166 HQC plasma source Technical specifications: Manufacturer: STIGAL Marcin Stępień Model/Name: Dynamic Machine Serial number: 541 Year of manufacture: 2018 Country of manufacture: Poland The Stigal Dynamic plasma machine is an industrial CNC plasma cutting system. It requires 400V three-phase power for proper operation and has a power consumption of 5.5 kW. This is an ideal machine for industrial applications in metal and sheet processing plants. The Plasma-Gas Cutter is designed for fast and precise cutting of steel sheets of various thicknesses. Transport within the EU is possible. VAT invoice available.

Year of construction: 2002, condition: refurbished (used), Cutting table / Plasma cutting gantry Brand: SATO Model: SATRONIK HD 8000 Year 2002 Number of heads: 2 - 1 Kjellberg FineFocus 800 cutting head - 1 Kjellberg FineMaker marking head with PB-M25 W torch Maximum wide cutting capacity: 6,000mm Maximum length wide cut: 24,000mm Controller: SATOCNC 3000 Cutting equipment information: Brand: Kjellberg Model: FineFocus 800 Maximum cutting capacity: 80mm Cutting quality up to: 60mm Maximum drilling capacity: 40mm Gbjdpjhzbi Nofx Ahnjn Maximum current at 100%: 300A Automatic gas console

Condition: used, Year of construction: 2017, functionality: fully functional, sheet thickness (max.): 100 mm, table length: 4,000 mm, working width: 2,000 mm, table width: 2,000 mm, cutting current: 200 A, working length: 4,000 mm, Equipment: documentation/manual, Year of manufacture 2017, first owner The machine is operational and can be inspected and tested on site. Operating manual and spare parts list available Gbsdsy Dz Svspfx Ahnjn Table 2000x4000 Plasma unit Kjellberg Smart Focus 200A with piercing up to 30mm material thickness, cutting up to 40mm material thickness Interchangeable head oxy-fuel torch GCE Rhöna, cutting up to 100mm material thickness Includes: • Second plasma torch • Tool cabinet with many original plasma consumables • Control PC • Kemper System 8000 extraction unit • Actcut programming and nesting software A suitable compressor is also available as an option Sale only to businesses with invoice. The machine is used and is sold under exclusion of any warranty.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: Aventa PLUS 4 x 2, type of input current: DC, working range: 40,002,000 mm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 25 mm, cutting current: 300 A, Equipment: documentation/manual, Macchina in operazione Gbedpfx Ajw Al Rmjhnjn

Condition: ready for operation (used), Year of construction: 2021, This ESAB Suprarex HD 4000 plasma cutting machine was manufactured in 2021. It features a track width of 4000 mm and a track length of 12000 mm, supporting a maximum working length of 9000 mm. The machine is equipped for both oxyfuel and plasma cutting, handling material thicknesses up to 200 mm. If you are looking to get high-quality cutting capabilities, consider the ESAB Suprarex HD 4000 machine we have for sale. Contact us for more information. Application Types Cutting Gbedex D D N Uepfx Ahnsn

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 30 mm, input voltage: 380 V, cutting speed: 6,000 mm/min, total width: 4,850 mm, total length: 10,150 mm, table length: 6,000 mm, working width: 2,000 mm, table width: 2,000 mm, cutting current: 260 A, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, type of cooling: water, height adjustment type: electric, input frequency: 50 Hz, Equipment: double-sided, We offer this used Ajan PP15088 AUTO plasma cutting machine, year of construction 2015. Working area: 2000 x 6000 mm Gedoy Annbopfx Ahnsbn Machine type: PP15088 AUTO Construction year: 2015 Input voltage: 380 V Phases: 3 Frequency: 50 Hz If you have any questions or need more information, feel free to send us a message or give us a call.