Used Plasma Spray for sale (3,062)

Condition: used, Year of construction: 2018, 2018 plasma cutting machine, in good condition, lightly used. Sold together with metal racks or separately. Equipped with three cutting heads – one plasma and two gas cutting heads. The machine can operate either the plasma head or both gas heads simultaneously (up to 100 mm thickness, using different technologies). For thicker materials, only one gas head can be used due to gas console throughput. Plasma Year of manufacture: 2018 Plasma source: Kjellberg HiFocus 300A Working area (X x Y): 2500 x 13000 mm table (1m safety zone, two 6000mm sheets placed on the table) Minimum/maximum cutting thickness: Mainly used within 20 – 70 mm range, virtually no minimum limit – plasma can cut from 2 mm, maximum with gas is 300 mm. Plasma is intended for quality cutting of mild steel up to 50 mm. Racks Manufacturer: OHRA GmbH (Germany) Year of manufacture: 2018 Fodpfsww Sy Djx Ah Uspp Shelf load capacity: 3T If you have further questions, we will be happy to answer them.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, track width: 3,000 mm, working range: 6,000 mm, total width: 3,800 mm, total length: 11,000 mm, product height (max.): 70 mm, cutting height (max.): 60 mm, Lind plasma cutting system with HiFocus 360I Hypertherm cutting unit including KWE 360, PGV 3. Cutting table with complete extraction system. System is fully functional and in excellent condition. Demonstration possible. Original price €190,000.00. The system is immediately available. The price is valid for purchases until the end of November! Fjdpfx Ahewmq Tzs Uepp

Condition: used, Year of construction: 2019, CNC portal plasma cutting machine Manufacturer: Microstep Model: MasterCut Compact 4001.20Ptk Year of manufacture: 2019 CNC control Working area: 2 x 4 m Plasma rotator "MasterCut" with fully automatic support for weld seam preparation 1 plasma torch with Kjellberg HiFocus 280i power source Filtration system TEKA Fpjdpfx Asxnmbnsh Usp 31125

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 01, type of input current: three-phase, sheet thickness (max.): 70 mm, sheet thickness steel (max.): 70 mm, input voltage: 400 V, total width: 3,069 mm, total height: 3,200 mm, total length: 5,700 mm, track width: 2,150 mm, table height: 867 mm, table length: 4,250 mm, working width: 2,000 mm, compressed air connection: 12 bar, positioning speed: 40 m/min, working length: 4,000 mm, space requirement length: 7,700 mm, input current: 400 A, space requirement height: 3,200 mm, space requirement width: 4,300 mm, feed length X-axis: 4,000 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 289 mm, year of last overhaul: 2024, MicroStep CNC cutting system from the MasterCut Compact series with the following features: - 2D plasma support with Kjellberg HiFocus 280i neo plasma power source - High-performance Donaldson DFPRO 8 Cyclopeel filtration system Machine designation: MasterCut Compact 4001.20P Working area: 4000 x 2000 mm Permissible sheet thickness: up to 100 mm Guides/drives: high-quality linear guides and backlash-free drive on both sides Axis control: digital, maintenance-free AC servos with IRC Positioning speed: up to 40,000 mm/min Measuring system: IRC 2500 (incremental encoder) LCD control unit Laser pointer for automatic offset transfer Automatic height control Fedpfsxuh A Hjx Ah Uopp Dust extraction unit suitable for indoor installation Machine is as new and fully operational, can be inspected at any time! Collection ex works, unpacked.

Condition: good (used), Year of construction: 2015, ESAB Combirex DX 3500 Plasma Machine Plasma Unit : ESAB m3 362 Precision 360A Oxygen Plasma Oxy Fuel Station, Automated Oxy-Fuel Torch with GPB Nozzle Capacitive Height Control Track Width : 3500m, Track Length : 8000mm, Cutting Width : 2500, Cutting Length : 6000mm Vision T% Interface, Power Cable, Gas System with Solenold Valves, Laser Point For Plate Location and Alignment, Light Guards Front And Rear. Fodexqqfijpfx Ah Ujpp

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 07034210 / 00368004644, type of input current: three-phase, working range: 6,100 mm, sheet thickness (max.): 200 mm, sheet thickness steel (max.): 120 mm, sheet thickness aluminum (max.): 25 mm, overall weight: 6,000 kg, input voltage: 125 V, cutting speed: 6,000 mm/min, total width: 4,500 mm, total height: 4,000 mm, total length: 9,000 mm, cutting height (max.): 300 mm, track width: 3,500 mm, table height: 800 mm, repeat accuracy: 1 mm, workpiece weight (max.): 6,000 kg, table length: 6,100 mm, working width: 2,600 mm, compressed air connection: 9 bar, positioning speed: 600 m/min, hose package length: 12,000 mm, table width: 2,600 mm, cutting current: 260 A, positioning accuracy: 1 mm, temperature: 30 °C, working length: 6,100 mm, space requirement length: 9,000 mm, input current: 125 A, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,700 mm, travel distance Z-axis: 300 mm, space requirement height: 4,000 mm, space requirement width: 4,000 mm, type of cooling: water, height adjustment type: mechanical, electrical fuse: 125 A, ambient temperature (max.): 40 °C, Equipment: documentation/manual, CNC cutting machine Brand: Air Liquide / Oerlikon Model: Oxytome B25 E Cutting head 1 - plasma source: Hypertherm HPR 260 Cutting head 2 - torch: propane/oxygen with mixing chamber Cutting range: 6100 x 2550 mm Plasma Steel: 3–35 mm thick Stainless steel: 3–25 mm thick Aluminium: 3–20 mm thick Oxy-fuel torch for steel: 25–200 mm Cutting table with zoned extraction Extraction unit not included Year of manufacture: 2008 Second owner since 2017 Machine will be delivered ready to cut Annual maintenance performed by the manufacturer Complete documentation available Currently operated with Radan/Hexagon cutting software Simple parts can be drawn directly on the machine Machine is being replaced due to age/wear and advancements in cutting technologies. Purchase of the separate plasma source (Hypertherm cutting unit) is negotiable. Dismantling not included Extraction system not included Software not included Collection only Machine can be inspected on site by arrangement Fpodpoxfqapjfx Ah Usp Price/offers by negotiation Inspection on site is possible.

Condition: used, Year of construction: 2007, functionality: fully functional, For sale: CNC plasma cutting machine – designed for the production of flue caps and ventilation components. Condition: Used, in good technical working order, currently connected – viewing and testing on site possible. This equipment is intended for the manufacture of pipes, chimney caps, and ventilation elements from sheet metal and light metals. Technical specifications: - Year of manufacture: 2007 - Cuttable pipe diameter: from Ø60 mm to Ø600 mm - Maximum product length: 1500 mm - Sheet thickness (official): 0.5 – 1 mm Fedpfxsxlp Sqs Ah Uspp - Tested capacity: cutting up to 3 mm wall thickness (depending on plasma source and metal type) - Plasma power sources: 2 units – 60A and 80A - Plasma output: 60 A / 80 A (depending on selected source) Features and equipment: - Fully programmable CNC controlled machine - Ability to generate cutting contours based on model or template - Precision automatic positioning and rotation system - Adaptable to different pipe diameters - Integrated plasma cutting control system with adjustable output - Comes with two plasma power sources (60A and 80A) – to suit your production needs Application: - Suitable for the production of ventilation systems, flue caps, ducting, and various tubular structures - Suitable for cutting thin sheet metal (0.5–1 mm) as well as processing thicker walls (up to 3 mm) - Utilization of CNC technology ensures high cutting precision and repeatability, reducing manual labor requirements If you have any further questions, please feel free to contact us.

Year of construction: 2023, condition: new, PLASMA PLOTTER MODEL MTX 2040 Construction: steel+aluminum Working field: 4000/2000/200 XY axis drive double-sided gate drive: 4Nm stepper motors with gears, gear strips Z axis drive: stepper motor ball screw Travel speed: up to 25m/min Z axis control system: THC My plasm system Linear guides: TBI IGUS guide Automatic material detection system Power supply: 240V Permissible load: 2000kg Total weight: 800kg net USB port for opening projects and transferring files using external pen-drives Sheet metal detection system THC cutting height control system TBI wire guides Double-sided gate drive: X-axis stepper motor and gear rails Y axis stepper motor and toothed rails Z axis stepper motor and ball screw Drives realized with TBI brand HGR 20 rails Table equipped with water grate- (Water table, giving cleaner cutting, material cooling and reducing gas emission during machining) INCLUDED: -water table -interchangeable grate -control software in Polish -Declaration of Conformity CE - DTR - warranty. -start-up and training included in the price The latest control system available in our plotters: Integrated THC height controller Anti-diving torch function Types of accepted files : DXF, PLT ( hpgl ), G-Codes (.tap) Integrated CAM module: MyMini CAM -. Automatic object recognition Ven. External. Path analysis in advance Cutting parameter database Correction of design angle to material Ability to cut from any point Possibility of cutting from the end Import of DXF,PLT or G-CODES Automatic generation of paths with offsets, entries and exits The program can be used with an external CAM program Separate speed for holes Parameter database Project correction to material angle Soft and Hardware limits THC anti-diving functions Fpedpfsiphrlsx Ah Uep Game pad control capability Material detection by touch system, floating head WHY IT'S WORKING WE ARE A POLISH MANUFACTURER OF PLASMA BURNERS CLOSE COOPERATION WITH PROMA-ELECTRONIKA COMPANY (PRODUCER OF THC) PROFESSIONAL GUIDES OF THE RENOWNED COMPANY HIWIN, A FEATURE OF THESE GUIDES IS VERY LONG LIFE, HIGH QUALITY OF CUTTING NOT REQUIRING FURTHER PROCESSING COMPONENTS SUCH AS GEARS, MOUNTS, HANDLES, ETC. ARE MADE BY US USING CNC TECHNOLOGY, WHICH RESULTS IN HIGH QUALITY AND REPEATABILITY OUR STRENGTHS HIGH CLASS SHIELDED CABLES INDUCTIVE SENSORS ON ALL AXES, WHICH ARE NOT SUBJECT TO DUST JAMMING ADVANCED THC MY PLASM SMOOTH BURNER OPERATION CPC INTERFACE (VOLTAGE DIVIDER SEPARATOR) MOUNTED ON CUTTING MACHINES WE ASSEMBLE CUTTING MACHINES DELIVERED BY A CUSTOMER OR WE PURCHASE CUTTING MACHINES MEETING CUSTOMER'S REQUIREMENTS WE ASSIST IN ARRANGING LEASES It is possible to select the appropriate cutting machine to individual needs of the company. We offer other dimensions of tables.

Condition: good (used), Plasma cutting machine, plasma cutter, for plasma cutting system -Manufacturer: Hypertherm Fjdpfx Aewd Tg Ssh Uopp -Type: HySpeed HT2000LHF -Equipment: with hose package and cutting nozzle head -Max. cutting current: 200 A -Dimensions: 1100/720/H1040 mm Weight: 459 kg

Condition: ready for operation (used), Year of construction: 2015, operating hours: 558 h, functionality: fully functional, Plasma Cutter MGM MS300 + Hypertherm HPR130XD Fully operational | Excellent condition For sale: a powerful and reliable MGM MS300 CNC plasma cutter equipped with the Hypertherm HyPerformance HPR130XD plasma source. The machine is in perfect working order, well maintained, and immediately ready for production use. ✅ Specifications: Model: MGM MS300 Plasma source: Hypertherm HPR130XD Cutting range: 1.5m x 3m PowerPierce™ Technology – excellent piercing capability HyPerformance Automatic Gas Consoles (O₂ / N₂) Control: Industrial touchscreen controller Automatic height control (IHT) Includes compressor and control cabinet Fpjdpfx Ahjxq Ta Ao Uop Voltage: 3-phase 400V Year of plasma source: 2015 Operating hours: Low usage, everything operates properly Purchase invoice available – can be shown upon request. 🧰 Condition: The machine is in excellent technical and optical condition with high precision. Price includes transport (within Belgium) VAT excluded

Year of construction: 1999, condition: not inspected (used), For sale is a built-in salt spray chamber/corrosion test chamber from Weiss Technik, type: SC/KWT 450 The system must be cleaned and serviced before use. The system can be inspected on site, shipping is possible. Manufacturer Weiss Technik B2misngk99 Type: SC/KWT 450 Test chamber capacity: 480 l Max. load: 100 kg Brine storage tank: 180 l Corrosion tests: Salt spray test: Room temp. up to +50 °C Babumc3umw Condensation water test: Room temp. up to +45 °C Voltage: AC 230V Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Normal climate (ventilation): DIN 50014 Fodpfx Ahsxfztte Ujpp

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWi 30.20 Dry splash wall Dimensions: 3000 x 2000 mm W X H Fan is built into the wall Air capacity: 10.800 m³ / h Motor: 2,20 kW ex-proof Exhaust air pipe: 500 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+180,- EUR net) Fpjdjfr T Emepfx Ah Uep Options/additional price for: transition angular to round: 150,- EUR net Paintstop filter mat terminal strip: 180,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Condition: excellent (used), Year of construction: 2013, Mode of operation: continuous operation with intermittent pauses Type of current: three-phase AC Frequency [Hz]: 50 Power consumption [kW]: 4 Supply voltage [V]: 3 × 400 V Number of filter bags / filter cartridges: 18 / Plitex Filter material: polyester felt 973010, dust class M, d = 160 × 1503 mm Filter area [m²]: 73.8 (4.1 m² per filter cartridge) Weight [kg]: approx. 700 Filter cleaning: compressed-air pulse cleaning Compressed air connection: standard NW7 quick coupling Fedpjxup Aujfx Ah Uepp  – compressed air must be dry and oil-free  – Maximum pressure: 8 bar, Nominal pressure: 6 bar Compressed air consumption: approx. 360 normal litres per cleaning cycle Ambient temperature [°C]: 5–40 Maximum sound pressure level [dB(A)]: less than 70 Conveyed medium: air with solid particles Minimum operating temperature [°C]: 5 Residual dust content [mg/m³]: < 0.2 Maximum operating temperature [°C]: 45 Type of solids: salt-containing dust up to 2 mm particle size Maximum Kst value [bar·m/s]: 200

Year of construction: 2023, condition: new, PLASM PLOTER MODEL MTX 2040 Ventilated Construction: steel+aluminum Fpsdpfx Asiphu Ish Uep Working field: 4000/2000/200 XY axis drive double-sided gate drive: 4Nm stepper motors with gears, gear strips Z axis drive: stepper motor ball screw Travel speed: up to 25m/min Z axis control system: THC My plasm system Linear guides: TBI IGUS guide Automatic material detection system Power supply: 240V Permissible load: 2000kg Total weight: 800kg net USB port for opening projects and transferring files using external pen-drives Sheet metal detection system THC cutting height control system TBI wire guides Double-sided gate drive: X-axis stepper motor and gear rails Y axis stepper motor and toothed rails Z axis stepper motor and ball screw Drives realized with TBI brand HGR 20 rails Ventilated table adapted for fume extraction INCLUDED: -ventilated table -control software in Polish -Declaration of Conformity CE - DTR - warranty. -start-up and training included in the price The latest control system available in our plotters: Integrated THC height controller Anti-diving torch function Types of accepted files : DXF, PLT ( hpgl ), G-Codes (.tap) Integrated CAM module: MyMini CAM -. Automatic object recognition Ven. External. Path analysis in advance Cutting parameter database Correction of design angle to material Ability to cut from any point Possibility of cutting from the end Import of DXF,PLT or G-CODES Automatic generation of paths with offsets, entries and exits The program can be used with an external CAM program Separate speed for holes Parameter database Project correction to material angle Soft and Hardware limits THC anti-diving functions Game pad control capability Material detection by touch system, floating head WHY IT'S WORKING WE ARE A POLISH MANUFACTURER OF PLASMA BURNERS CLOSE COOPERATION WITH PROMA-ELECTRONIKA COMPANY (PRODUCER OF THC) PROFESSIONAL GUIDE RAILS OF RENOWNED COMPANY HIWIN, A FEATURE OF THESE GUIDES IS VERY LONG LIFE, HIGH QUALITY OF CUTTING NOT REQUIRING FURTHER PROCESSING COMPONENTS SUCH AS GEARS, MOUNTS, HANDLES, ETC. ARE MADE BY US USING CNC TECHNOLOGY, WHICH RESULTS IN HIGH QUALITY AND REPEATABILITY OUR STRENGTHS HIGH CLASS SHIELDED CABLES INDUCTIVE SENSORS ON ALL AXES, WHICH ARE NOT SUBJECT TO DUST JAMMING ADVANCED THC MY PLASM SMOOTH BURNER OPERATION CPC INTERFACE (VOLTAGE DIVIDER SEPARATOR) MOUNTED ON CUTTING MACHINES WE ASSEMBLE CUTTING MACHINES DELIVERED BY A CUSTOMER OR WE PURCHASE CUTTING MACHINES MEETING CUSTOMER'S REQUIREMENTS WE ASSIST IN ARRANGING LEASES It is possible to select the appropriate cutting machine to individual needs of the company. We offer other dimensions of tables.

Condition: ready for operation (used), From business liquidation: Hypertherm Powermax 1650G. The unit has been tested for functionality! Comes with an 8-meter torch package. 380 Volt. 30-100 Amp power output. Quality cut up to approx. 35 mm. Severance cut up to approx. 45 mm. Includes several spare nozzles (see photo). Torch and ground cable have been repaired with insulation tape in some places (see photo). Fpodpfx Ahoxq Rbdj Ujp

Condition: used, Year of construction: 2007, functionality: fully functional, plasma cutting torch PT36 with inclined mounting, straight oxy-fuel torch, height sensor, Precision plasma source 400 with CC-11 cooling unit, spare oxy-fuel cutter, Marlborough extraction table 14x3.5 meters, Vision control software, Columbus compatible, sheet thickness 3-300mm Fsdpfx Ajxqn S Teh Uspp

Condition: excellent (used), Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet Used to test water ingress into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test duration from 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated recirculation system reduces water consumption to a minimum. Features - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Interchangeable oscillating pipes - Swivel and interchangeable nozzle holders - Adjustable and measurable water flow rate - Test duration control Data for mechanical load: - Max. load with test specimens (evenly distributed): Permissible total weight for specimen carrier: 25 kg - Spray radius: 200 mm / 400 mm Data for IP protection class tests - Oscillation speed approx. 60°/s - Oscillation angle IPX3 approx. ±60° Fpjdpfjxg Hrkjx Ah Uep - Oscillation angle IPX4 approx. ±180° -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External dimensions (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data: - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 6.0 A - Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) Further questions can be answered by phone.

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWi 20.20 Dry splash wall Fodpfx Aefr T Eqjh Uopp Dimensions: 2000 x 2000 mm W X H Fan is built into the wall Air capacity: 7,200 m³ / h Motor: 1,50 kW ex-proof exhaust air pipe: 400 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+150,- EUR net) Options/additional price for: transition angular to round: 150,- EUR net Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Condition: good (used), Year of construction: 2012, Worktable: 3,000 x 1,500 mm Table height: 700 mm Fpjdpfx Asxugqvoh Uop Load capacity: Max. 600 N/m² Material thickness: 0.5 – 6 mm Speed: Max. 36 m/min Control unit: Flat display, keyboard and mouse Power supply: 3x 400V, 50Hz + 1x 220V, 50Hz (approx. 10 kW) Pneumatics: 6.0 – 8.5 bar (approx. 300 l/min) Dimensions: 4,100 x 2,200 x 1,700 mm Weight: 1,400 kg The extraction unit is not included in the price. However, upon request, we can provide a suitable extraction system for the machine.

Year of construction: 2023, condition: new, PLASMA CUTTING MACHINE MODEL MTX 1500/3000 Construction: steel+aluminium Overall dimensions: 3350/2200/1300 Working area: 3100/1520/140 XY axis drive: 4Nm stepper motors with gears, precision grade 8 Z axis drive: stepper motor ball screw Travel speed: up to 25m/min Z axis control system: THC My plasma system Collision protection system to prevent burner damage Linear guide: TBI Automatic material detection system Power supply: 240V Maximum load: 1700kg Total weight: 1200kg net INCLUDED: - control panel -water table -exchangeable grate -control software in German, English, Polish -Certification of conformity CE Fsdpeh Rabnofx Ah Ujpp - DTR - warranty The possibility of selecting the appropriate Hypertherm cutter to individual needs of the company.

Condition: ready for operation (used), From business liquidation: Hypertherm Powermax 1000G Fjdpfxsxq N Trs Ah Uopp Device has been function tested! with 10-meter torch package on transport cart 380 Volt 20–60 ampere power output Quality cut up to approx. 22 mm Severance cut up to approx. 30 mm + several spare nozzles (see photo)

Condition: new, Year of construction: 2025, total length: 19,100 mm, total width: 6,600 mm, total height: 5,000 mm, inner dimension height: 4,000 mm, inner dimension length: 18,000 mm, inner dimension width: 6,000 mm, We offer the production of foldable, "accordion-style" spray booths in any dimensions and specifications defined by the client. Example projects can be seen in the photos. As a manufacturer, we handle the design, production, installation, and warranty service of spray booths. Our offer includes a wide range of spray booths – we encourage you to check out our other listings. Fpedpjvphfzsfx Ah Usp Feel free to contact us!

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSE 20.20 Dry splash wall Dimensions: 2000 x 2000 mm W X H Fan is installed above the wall + Fan in the height Air capacity: 7,200 m³ / h Motor: 0.75 kW explosion-proof (ATEX) Exhaust air pipe: 500 Ø mm depth: 900 mm The pipeline should not exceed a total length of 3-4 meters. Double filtration: paper filter + Paintstop filter mat over Terminal strip (+150,- EUR net) Fpodpfofv Hiqox Ah Uop Options/additional price for: Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWc 20.20 Dry bulkhead Dimensions: 2000 x 2000 mm W X H + Fan in the height Air capacity: 7,200 m³ / h Motor: 1,50 kW ex-proof exhaust air pipe: 400 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+150,- EUR net) Options/additional price for: Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. Fpodpfxefn Ndco Ah Ujp We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. T.S.W.C. 30.20 Dry bulkhead Dimensions: 3000 x 2000 mm W X H + Fan in the height Air capacity: 10.800 m³ / h Motor: 2,20 kW ex-proof Exhaust air pipe: 500 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+180,- EUR net) Options/additional price for: Paintstop filter mat terminal strip: 180,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. Fjdpfofn Nddex Ah Uopp We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.