Used Plasma Torch for sale (749)

Condition: used, functionality: fully functional, Micro and mini plasma welding generator, complete with torch and power cables. Suitable for welding stainless steel with thicknesses ranging from 0.5 to 1.00 mm. Power supply: 380-41.5V (12A). Maximum welding current: 150A, with a welding speed of 5 to 10 mm/sec. Nedpfozlud Esx Alaeld

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Nledpfx Ajzizkyolaod Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Year of construction: 1999, condition: ready for operation (used), A ZinserCNC plasma cutting machine is offered, max. plasma capacity: 130A, max. plasma material thickness: approx. 25mm, max. oxy-fuel material thickness: approx. 200mm, cutting table dimensions X/Y: approx. 2750mm/10500mm, working area X/Y: approx. 2000mm/9000mm, X/Y drive: rack and pinion, control: Zinser CNC 500. Inspection possible by appointment. Nlodozklgbopfx Alajd

Condition: excellent (used), I sell plasma cutter hypertherm powermax 800 d very good condition. /////Price listed for 1 pc ///// Nlodpfeulc Ixex Alaed Plasma cutter Hypertherm Powermax 800 Plasma cutter description The Powermax800 plasma cutting system uses an inverter power supply to provide a smooth DC output voltage for superior cutting and gouging of mild steel, stainless steel, aluminum and other metals. The Powermax800's power supply provides a constant output current that varies from 20 to 50 amps, providing optimal performance for all metal thicknesses up to 1/2 inch (12 mm). At 50 amps, the Powermax800 can cut metals up to 3/4 inch (20 mm) thick and cut metals up to 1 inch (25 mm) thick.

Condition: ready for operation (used), Dimensions: Width: 180 mm Nledpsxfk Dzsfx Alajd Depth: 460 mm Height: 280 mm Year of manufacture: 2008 Cutting thickness: Quality cut 12 mm – Severance cut 14 mm

Condition: used, Year of construction: 2020, functionality: fully functional, type of input current: three-phase, sheet thickness steel (max.): 80 mm, table length: 6,000 mm, working width: 3,000 mm, table width: 3,000 mm, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,000 mm, Equipment: documentation/manual, CNC Plasma Cutting Machine 6000x3000 mm – Messer MetalMaster Xcel 6030 – Hypertherm XPR300 – Bevel Head CNC Plasma Cutting Machine Messer MetalMaster Xcel 6030 General Information • Manufacturer: Messer Cutting Systems year of manufacturing 2020 • Model: MetalMaster Xcel 6030 • Machine Type: CNC Plasma Cutting Table Nlsdpsyx Svbsfx Alajd • Condition: Used – good working condition • Availability: Immediate available Working Area • Cutting table size: approx. 6000 × 3000 mm Plasma System • Plasma power source: Hypertherm XPR300 High-definition plasma system for precise and high-speed cutting of carbon steel, stainless steel, and aluminum. Equipment / Options • Bevel cutting unit: BEVEL-R (5-axis bevel cutting system) for weld preparation and angled cuts • Software: OmniWin – programming and nesting software for optimized material usage Dust extraction system • BEUTING PFM3-9 (100 L extraction unit Machine Advantages • Robust industrial gantry construction • High precision and productivity • Bevel cutting capability for complex parts • Efficient nesting and programming via OmniWin software • Suitable for heavy steel fabrication and industrial production Applications • Structural steel fabrication • Industrial metal cutting • Manufacturing of machine components and steel constructions Additional Information Sold as it is dismantling and shipping not included. Machine can be inspected under power by appointment. Further technical details, photos, and videos available on request.

Condition: used, total length: 28,000 mm, For sale: MGM OMNICUT PGV3 CNC plasma and gas cutting machine. The machine is used, fully functional, and operational. It can be inspected and tested on-site. These CNC thermal cutting machines are manufactured by the Czech company MGM Tábor and are designed for plasma and gas cutting of metal sheets. The MGM OmniCut series is designed for professional, heavy-duty, and continuous operation, making it ideal for the production of large metal structures. Technical specifications: Manufacturer: MGM Tábor Model: OMNICUT PGV3 CNC control Plasma cutting Gas cutting Working table length: approx. 28,000 mm Working table width: approx. 3,000 mm Cutting thickness: Plasma: from 0.5 mm to 150 mm (depending on the plasma source) Gas cutting: up to 300 mm Heavy-duty portal construction Designed for continuous operation in industry Advantages: Large working area Plasma and gas cutting capability in one machine Suitable for cutting thick and large-format metal sheets CNC control ensures precise and repeatable cutting Reliable industrial construction The machine is connected and in use Can be seen in operation in production Nsdpfxjzd Td Is Alasld Application: Ideal for the production of metal structures, shipbuilding, energy, heavy industry, agricultural machinery, bridges, tanks, and other large metal products. If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 2014, functionality: fully functional, ■ Infeed roller conveyor (length 6m, width 2000mm, roll diameter 159mm, roll distance 800mm, capacity 1250kg/m, including liftable datum line) ■ V320-2000 Plate processing system (base frame with vertical drilling unit, automatic tool changer and automatic discharge table) ■ Feeder trucks (servo driven, master truck with 3 hydraulic clamps, support truck with 2 hydraulic clamps) ■ Swarf brush (automatic swarf removal after drilling operations) ■ Oxy-fuel cutting torch (1 pcs, with automatic height control IHT M4000 Cap) ■ Plasma cutting unit Hypertherm HPR260XD (1 pcs, automatic gas console, complete with cutting parameter database) ■ Fume extraction unit Donaldson DFPRO6 ■ Product conveyor belt ■ Outfeed roller conveyor (length 3m, width 2000mm, roll diameter 159mm, capacity 1250kg/m) ■ Hardware and software (including VACAM ‘Machine Edition’, VACAM ‘Office Edition’) ■ Safety devices (safety fencing, light curtain, light curtain muting) ■ Year of construction 2014 Technical specifications Operating range V320-3000 Min. / max. plate length 850 – 6.100 mm Min. / max. plate width 200 – 2.050 mm Min. / max. plate thickness 6 – 75 mm Max. capacity 7.500 kg Material Mild steel Drilling unit VD40 Automatic tool changer 10 positions Feed Synchronous driven servomotor, servo-inverter Spindel rpm Step less 0 – 2.500 rpm (servomotor) Nominal power 30 kW Lubrication Internal and external by mist of air / oil Tool holder SK 40 Njdoy E Nxgspfx Alaold Drill diameter 5 – 40 mm Thread tapping M6 – M24 Centre point marking possibility Yes Countersinking possibility Yes Layout marking possibility Yes Hydraulic clamping Yes Plasma cutting unit HPR260XD Max. thickness 64 mm Max. pierce capacity 38 mm Dross-free cutting max. 32 mm Marking Yes, with same consumables Plasma gas mild steel Cutting O2 (99,9% pure clean, dry, oil-free) Marking Argon gas Shield gas mild steel O2 / Air (99,9% pure clean, dry, oil-free) Cutting speed 6 mm Approx. 4.035 mm / min 130A 12 mm Approx. 3.060 mm / min 200A 25 mm Approx. 1.660 mm / min 260A 50 mm Approx. 590 mm / min 260A 64 mm Approx. 195 mm / min 260A * Grounding max. 6 m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes. Oxy-fuel cutting unit Type Nozzle mix Automatic height setting Yes Gas supply Magnetic valve with back-fire protection Ignition Automatically Max. thickness 75 mm Gas Propane Optional gas Acetylene Cutting gas O2 Operating direction From left to right General information Voltage stabilizer Not included Current Transformer Not included Ambient temperature 0 – 35°C max. 95% relative humidity Working height 760 mm (+/- 25 mm)

Condition: used, Year of construction: 2014, ■ V304 plate cutting machine capable of processing plates up to 1.500mm x 3.000mm ■ V304 plate processing machine (including gantry beam 2.500mm and side trucks) ■ X-rail (5.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ■ Plasma cutting and extraction table (1.600mm x 3.090mm, 1 pcs) ■ Plasma cutting unit Kjellberg HiFocus280i (1 pcs) ■ Torch suspension for plasma cutting unit (including IHT M4000 PCS automatic height control) ■ Carriage for cutting unit (motor driven, including laser pointer, 1 pcs) ■ Kemper fume extraction unit 81 0550 090 (including spark trap 1 pcs) ■ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module) ■ Safety devices (safety bumpers, emergency stop cord) Technical specifications PLASMA CUTTING UNIT HIFOCUS 280i Material Mild steel, stainless steel, aluminum Nlsdpfx Alsy E Nykeasd Min. thickness 3 mm Max. thickness 70 mm Max. pierce capacity 40 mm Dross-free cutting max. 35 mm Automatic height setting Yes, IHT M4000 PCS Marking lines Yes, with same consumables Plasma gas mild steel Cutting O2 (99,9% pure clean, dry, oil-free) Marking Argon gas Shield gas mild steel O2 / air (99,9% pure clean, dry, oil-free) Automatic gas console Yes Cutting speed mild steel 6 mm Approx. 4.100 mm / min 90A 12 mm Approx. 3.200 mm / min 160A 25 mm Approx. 2.000 mm / min 280A 40 mm Approx. 720 mm / min 280A 50 mm Approx. 400 mm / min 280A 70 mm Approx. 150 mm / min 280A * Grounding max. 6m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes. COLOUR Plates RAL 3003 Red Frames RAL 7011 Grey GENERAL INFORMATION Working height 700 mm (+/- 20 mm) Voltage stabilizer Not included Ambient temperature 0 – 35°C max. 95% relative humidity

Condition: used, functionality: fully functional, Year of construction: 2008, Peddinghaus FDB 1000/3 – CNC Plate Drilling & Profiling System– Year 2008 6 metres x 1 metres Capacity. Maximum workpiece width 1000 mm. Maximum workpiece thickness 50 mm. 3 x drilling spindles. Maximum drilling diameter 40 mm. Oxy‐Fuel. Hypertherm Plasma. Kemper Extraction Unit Nlodjy E N Hdjpfx Alasd

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm.  Gantry bridge.  Carriage with servo-drives (to position the gantry bridge in X-direction).  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m.  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs. Nedpstp Dhpofx Alajld  Plasma bevel cutting unit, including automatic height control system.  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch).  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support).  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support).  Emergency stop with stop cord.  Year of build: 2013.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, MESSER MULTITHERM 3600 GLOBAL CNC PLASMA BED LENGTH 10300mm BED WIDTH 2100mm RAIL WIDTH 3650mm HYPERTHERM HPR 260. Cutting capacities: Mild steel cut capacity Nodpfey Tpqxox Alaold Dross free* 32 mm (1-1/4") Production pierce 38 mm (1-1/2") Maximum cutting capacity 64 mm (2-1/2") Stainless steel cut capacity Production pierce 32 mm (1-1/4") Maximum cutting capacity 50 mm (2") Aluminum cut capacity Production pierce 25 mm (1") Maximum cutting capacity 50 mm (2")

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) Nledjvpalaepfx Alaed ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: good (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 2,000 mm, total length: 6,000 mm, type of cooling: water, cutting current: 135 A, Messer MetalMaster 6020 – Plasma Cutting Machine High-quality, robust plasma cutting machine engineered in Germany, equipped with a powerful Hypertherm power supply and a large working area. The machine has been well-maintained and is in good operating condition. Key Highlight: The machine underwent a complete retrofit/modernization in 2016, ensuring upgraded reliability, longer service life, and modernized performance. Technical Specifications | Feature | Details | | --- | --- | | Manufacturer / Model | Messer MetalMaster 6020 | | Year of Manufacture | 2008 / Retrofitted in 2016 | | Working Area (X × Y) | 2000 × 6000 mm | | Plasma Power Source | Hypertherm HPR 130 | | Table Type | Downdraft table (efficient fume extraction) | | Control / Features | Cut Chart integrated (ready-to-use cutting parameters for various materials and thicknesses) | Machine Condition & Key Benefits 2016 Retrofit: Having been retrofitted in 2016, critical components (such as controls, electronics, or drive systems) have been modernized. This significantly increases operational reliability and extends the machine's lifespan well into the future. Condition: In good condition, regularly serviced, and ready for immediate operation. Integrated Cut Charts: The machine features pre-installed cutting databases/charts. This makes setup incredibly fast and easy for different materials and plate thicknesses, ensuring optimal cut quality and maximizing consumable life. Hypertherm HPR 130: A highly reliable and industry-standard power supply with excellent global availability for spare parts and servicing. Delivers precise cuts (HyPerformance plasma). Njdpjzhn Atsfx Alaeld Large Working Area: The 6-meter bed length allows for cutting long plates or loading multiple smaller sheets simultaneously, significantly increasing production efficiency.

Year of construction: 2008, condition: ready for operation (used), Mains voltage: 3x 400V, 50Hz, fuse protection: 125A slow-blow, maximum connected load: 83kVA, cutting current at 100% duty cycle: 80 to 300A, output voltage: 112 to 200V, rated output current: 300A, duty cycle: 100%, maximum input current: 120A, protection class: IP22, insulation class: F, cooling method: AF (air cooling), no-load power consumption: 1.3kW, maximum operating pressure: 0.55MPa (5.5bar), impulse withstand voltage (Up): 17kV, plasma torch: PB-S80 W, compatible plasma gases: O₂, air, Ar, H₂, compatible swirl gases: air, N₂, length: 1375mm, width: 870mm, height: 1505mm, weight: 556kg. Inspection on site is possible. Nedpfx Alozhnuceaeld

Condition: like new (used), functionality: fully functional, Year of construction: 2021, operating hours: 55 h, control type: CNC control, degree of automation: automatic, actuation type: pneumatic, controller manufacturer: HyperTherm, controller model: HYPERTHERM EDGE CONNECT, laser type: CO₂ laser, laser source manufacturer: Hypertherm XPR 170 (USA), sheet thickness (max.): 60 mm, sheet thickness steel (max.): 60 mm, table length: 8,100 mm, table width: 3,500 mm, table height: 750 mm, working length: 6,000 mm, working width: 2,000 mm, working height: 750 mm, power: 50 kW (67.98 HP), input voltage: 400 V, compressed air connection: 8.5 bar, overall weight: 7,000 kg, total length: 8,200 mm, total width: 4,100 mm, total height: 2,500 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Baykal BPS 2006 CNC Plasma Cutting Machine – Hypertherm XPR170 High-Definition + True Bevel + True Hole CNC plasma cutting machine in very good working condition - Like NEW, year of manufacture 02/2021 (serial no. 27804), low operating hours - approx. 55h, one owner. Plasma source: Hypertherm XPR170 X-Definition (made in USA) with automatic gas console — cutting capacity 0.5–60 mm, accuracy ±0.1 mm. True Hole technology for superior hole quality on mild steel. Bevel cutting: True Bevel technology — automatic bevel head up to +/- 45° (weld-prep cuts without secondary operations). CNC control: Hypertherm EDGE Connect TC, Windows-based, touch screen. Software: Hypertherm ProNest CAD/CAM with automatic nesting (DXF, DWG, IGES import). Main specifications: Cutting table: 2000 x 6000 mm, sectional fume extraction with CNC-operated electropneumatic dampers Positioning speed: up to 30 m/min, positioning accuracy ±0.01 mm Dual synchronized AC servo drive on longitudinal axis, rack & pinion Automatic torch height control (capacitive initial height sensing + arc voltage THC), torch collision protection Nominal power: 50 kW, 380/400 V Air pressure: 8.5 bar Machine dimensions: 8100 x 4100 x 2500 mm, weight approx. 7000 kg Includes filter/extraction unit and XPR170 consumables starter kit (mild steel) Machine is ready for inspection. Dismantling and loading can be arranged. Price negotiable, export possible worldwide. Nlsdozktiqjpfx Alasd

Condition: good (used), Vollmer GPA 10 U Machine for automated stelliting in the plasma welding process Equipped for band saw blades with auxiliary feed Nljdpfxod Ernwo Alasd with heavy-duty support tables

Condition: new, Year of construction: 2006, type of input current: three-phase, total height: 800 mm, total width: 520 mm, total length: 800 mm, input voltage: 400 V, Professional Jackle Power Plasma 160A cutting machine for sale. German-made industrial equipment, suitable for a variety of metal cutting applications. Power supply: 400V, three-phase. Cutting current adjustable from 20A to 160A. The machine is in working condition. Nljdey U Izfjpfx Alajd

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 1200603/R, type of input current: three-phase, working range: 6,000 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 3 mm, overall weight: 4,000 kg, input voltage: 380 V, total width: 3,000 mm, total height: 2,250 mm, total length: 7,600 mm, cutting height (max.): 20 mm, table height: 790 mm, table length: 6,000 mm, working width: 2,000 mm, table width: 2,000 mm, cutting current: 100 A, working length: 6,000 mm, input current: 31 A, travel distance X-axis: 2,000 mm, travel distance Y-axis: 6,000 mm, travel distance Z-axis: 200 mm, type of cooling: water, height adjustment type: mechanical, input frequency: 250 Hz, water tank capacity: 25 l, power: 3 kW (4.08 HP), Equipment: documentation/manual, HD Plasma Cutting System – Farina – 2000x6000 mm – Excellent Condition For sale: High-definition (HD) plasma cutting system by Farina, year 2003, in excellent working condition. This machine is a robust and reliable solution, ideal for heavy-duty fabrication and precision work on large formats. Technical specifications: - Brand: Farina - Year of manufacture: 2003 - Worktable dimensions: 2,000 x 6,000 mm - Generator: Hypertherm HD3070 (High Definition), synonymous with quality and precision in plasma cutting. - Included equipment: Dedicated dust extraction system and filters (MA-FER). - Software: Controlled via InfoLab software. - New torch: Original PAC186 torch, upgraded to HyPerformance HD3070 Key features: - Worktable dimensions ideal for handling large sheet metal. Nedpfszkhmdjx Alaeld - Hypertherm HD3070 technology guarantees superior cutting quality compared to standard systems. - Complete system with dust extraction, ready for use. - Robust machine, perfect for those seeking an excellent balance between investment and productivity.

Condition: used, Year of construction: 1995, functionality: fully functional, BANCO DI TAGLIO AL PLASMA usato SOITAB da mt.4x2, CON GENERATORE HYPERTHERM MAX 200, revisionato e con CNC nuovo. SP. MAX 40mm IN FE Nedpfjzh Dg Isx Alaeld SP. MAX 20mm IN INOX Viene fornito tutto revisionato con controllo CNC nuovo ed installato dal cliente con corso di formazione all’uso, tempi 30/40gg per ultimare il lavoro,prezzo chiavi in mano finito compreso di filtro usatto ma escluse le predisposizioni elettriche ed il camino fumi dal filtro al al tetto.

Condition: used, functionality: fully functional, BANCO DI TAGLIO AL PLASMA usato CR ELECTRONIC da MT.8x2.5 CON GENERATORE HYPERTHERM HT2000 LHF, REVISIONATO "CE" Nledezhutropfx Alaed

Condition: good (used), MicroStep SPL-PA plasma cutting system with extraction and compressor technology Manufacturer: MicroStep Group Model: SPL-PA 4501.15+S50 Current requirement: 120 A Machine type: CNC plasma cutting system CNC control: iMSNC Nedpfeyvd Uiex Alaold Design: Portal design with linear guides Extraction system: Donaldson Torit DCE Electrical connection for extraction system: 400 volts Motor power of extraction system: 7.5 kW Compressed air generation: Screw compressor Compressor manufacturer: Kaeser Compressor model: TA 8 CE marking: present Location: Waltenhofen, Germany Dismantling and loading by the seller included.

Condition: good (used), functionality: fully functional, MKS Instruments. Inc. plasma generator, AX7670 60 R, ASTRONi Model: AX767060R Type: ASTRONi 200-208V AC Nodpfx Alsuyi U Aoajld 50/60Hz 30A

Condition: excellent (used), Year of construction: 2017, working range: 4,000 mm, overall weight: 6,500 kg, total width: 2,400 mm, total height: 2,600 mm, total length: 6,000 mm, Working area X Axis:4000mm Working area Y Axis:2000mm Working area Z axis:400mm Power resonator: 300kW / Amp Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Dust collector: Kemper Length: 6000mm Width: 2400mm Nodpfoy T Hywjx Alajld Height: 2600mm Weight: 6500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2010, machine/vehicle number: VG6000 3224, Equipment: documentation/manual, Koike Versagraph 6000, including cutting tables. Excluding strips. Nlodpjzdz U Usfx Alaed The machine was fully functional until April 2022. It has been disassembled and stored since 2022. Original new price: 450,000 euros.