Used Plate Compactor for sale (14,702)

Condition: used, Year of construction: 1973, sheet width 3100 mm plate thickness 3 mm rear stop 1000 mm down holder 18 Stk cutting angle 0.5 - 1,0° 30° ° oil volume 150 l total power requirement 5,5 kW weight 4300 kg dimensions of the machine ca. 3800 x 1950 x 1600 mm Features: - Manual rear stop (front via handwheel) - Manual cutting angle adjustment - 1x front support arm - 1x side stop Fjdpfx Ahjtzv T To Uepp - Front finger guard - Operating instructions (English)

Condition: used, Radial drilling machine with plate field WEBO type HRH 100 / 3000 Machine. No. 10009555/7 -- 1110185 -- 6046 Year of manufacture 1979 Drilling capacity Ø 100 mm in ST 60 at feed rate 0.5 mm/rev. Nominal throat depth 3000 mm Max. throat depth max. 3100 mm Spindle holder MK 6 Spindle speed 22.4 - 1600 rpm 36 steps Feed rate 0.05 - 2.5 mm/rev 18 steps Spindle - base plate distance 970 - 2335 mm Pinol stroke 325 mm Swivel range of the arm 360 movable on bed, bed length 7500 mm Clamping area panel field 8000 x 2100 mm - Electrical central clamping - Drilling unit can be moved lengthwise on the machine bed by electric motor - Panel field consisting of 2 clamping plates with 7x T-slot, (length 4000 x width 2100 x panel thickness 360 mm) Space requirement L x W x H 8000 x 4550 x 4300 mm Maximum height 4300 mm Fodpfx Ahsfbt Hue Uopp Transport height (bed with drilling machine) approx. 3150 mm Transport weight (bed with drilling machine) approx. 20 tons Transport dimensions of panel section L x W x H 4000 x 2100 x 900 mm (2 panels stacked on top of each other) Transport weight panel field approx. 14 ton. good condition

Condition: used, each with 26 stations with divider plate suitable for 52 blocks : - dimensions 1 full block per station -> 1.060 mm x 520 mm - dimensions 2 blocks per station -> 535 mm x 500 mm max. thickness blocks 100 mm suitable for cooling with ammonia or freon (not included) Fpedpsxtcxtsfx Ah Uop dimensions (l x w x h) : ± 4.000 x 1.700 x 1.300 mm 52 blocks weighing 26 kg or 104 blocks weighing 13 kg 1352 kg / Cycle (2h30) in good condition

Condition: new, Year of construction: 2025, Schnittbereich quadratisch (B x H): 2600 x 100 mm Kürzeste Länge des abgeschnittenen Stücks : 1100 x 20 mm Kürzeste Reststücklänge im automatischen Betrieb*: 400 mm Kürzeste Reststücklänge im Einzelschnitt: 40 mm Electrical connected load: 41 kW Leistung des Sägemotors: 30 kW Leistung hydraulischer Motor: 7,5 kW Schnittgeschwindigkeit stufenlos regelbar: 20-100 rpm Saw feed speed: 1-700 mm / min Fpjdpfx Aoxlcaueh Uop Höhe der Materialauflage: 720 mm Sägeblattdurchmesser: 425 mm Sägeblattbohrung: 50 mm Sägeblattdicke: 2,7 mm Length: 12000 mm Breite inkl. Späneförderer : 6300 mm Height: 3000 mm Weight of machine approx.: 28000 kg Standard configuration Variable blade speed controlled by inverterPrecision feed pressure & feed rate dual valve systemServo feeding motor with precision ball screwCombined guides with bearingsOil mist cooling de anti-vibration deviceP.L.C. control for all electric and hydraulic raulic pump with three-phase motorTwo sets of horizontal and vertical clamping devicesAdjustment baseRoller table

Condition: good (used), functionality: fully functional, Sheet width: 4050 mm Fpedpfx Ahexu Nc Is Ujp Sheet thickness: 8 mm Cutting angle: 2 - 10° Cutting speed: 0.053 m/s Table length: 710 mm Machine weight approx.: 10,100 kg

Condition: excellent (used), Year of construction: 2017, Vacuum lifting device, Schmalz vacuum lifter for heavy panels with new suction rubber Load capacity 150 kg horizontally and vertically Suction pad is motor-driven, 90° rotatable Suction box 1000 x 675 mm Acoustic warning signal in case of insufficient vacuum 400V, 1.5kW Can be attached to an existing customer chain hoist Fsdpfx Ahsv S Syne Uepp CE marking No inspection logbook available Suction rubber replaced As new condition The machine can be demonstrated at our site by appointment. We only offer machines that are ready for demonstration in our warehouse – see 'more offers from this seller'.

Condition: used, Year of construction: 1985, sheet width 3100 mm plate thickness 4.0 mm Fpodsxab Tvepfx Ah Uep thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 oil volume 160 L Control ELGO P8511 column arm 200 mm distance between columns 3050 mm 0 max. 300 bar voltage 400 V main drive 9.0 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear "swing cut" - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left * for positioning the electro-motoric rear stop * target/actual position value input possible * adjustment by three-phase motor via toothed belt - support table with ball rollers * there are recessed grips between the table plates - front finger guard - hydraulically acting sheet metal hold-down device - 1x freely movable foot switch - emergency stop button at the front - movable scrap switch - original operating instructions + circuit diagram Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal cuts - 1x EHT extra long side stop 3.000 mm with mm scale & support foot - 1x EHT extra long support arm with 3.000 mm with scale & Support foot - EHT additional support arms with mm scale

Condition: new, Year of construction: 2025, Extremely strong industrial magnet for iron separation Special price 970 € net (shipping 14,90 € net) *the lengths can be seen in picture 2 The active side has a stainless steel end plate (material 1.4301). There are threaded holes on the back for mounting *handle available on request The block magnet systems can be used up to a maximum operating temperature of + 100 °C. The magnet surface should be regularly cleaned of any trapped iron parts. Starting heights for all types e.g. For a steel nut M5 approx. 60 mm For an M5 x 30 screw approx. 100 mm Fodpfx Ahetqfhxs Uspp Installation example 1: Mounted above a conveyor belt, the iron parts "jump to the holding surface of the magnet". Installation example 2: Mounted in a piping system with direct contact to the material flow. For a high level of separation safety, it is possible to install several block magnets in a cascade, one behind the other. Installation and safety instructions: When handling, unpacking and then installing, make sure that there are no loose iron parts such as tools or screws in the vicinity. The magnetic attraction is so strong that painful injuries can occur if fingers come between iron parts and the active surface. There should be no steel parts within a minimum distance of 400 mm below the active surface.

Condition: used, Year of construction: 1996, total length: 3,500 mm, total width: 1,500 mm, total height: 1,400 mm, Empty weight: 3.000 kg - Year: 1996 - Documentation available: Yes - Max. sheet thickness: 5mm - Top roll diameter: 150mm - Max. working width: 1000mm - Drive: raulisch - Number of rolls: 4 - Bottom roll diameter: 150mm - Transport dimensions: 3500mm x 1500mm x 1400mm (l x w x h) - Transport weight [kg]: 3000kg Fpjdpfx Ahjw Abn Is Ujp - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2008, condition: good (used), Item: D-7802-APV-Heat Exchanger Stainless Steel Heat Exchanger Type APV H17, Fpjdpfjf Srmzex Ah Uop Temperature max. 110 C From 2008. Nominal Capacity: 20,5 kW Transmission: 2,7 m2 Press: 4,5 Bar

Condition: good (used), functionality: fully functional, Year of construction: 1993, Sheet width: 3100 mm Fodpfx Ajxu Nb Dsh Uopp Sheet thickness: 6 mm Stroke: 160 mm Back gauge: 1000 mm Total power: 5.5 kW Machine weight approx.: 6,500 kg

Condition: used, sheet width 2000 mm plate thickness 3 mm Fpodpfx Aexfwdzjh Uop rear stop von Hand, 750 mm dimensions ca. 2800 x 1120 x 1510 mm weight ca. 1800 kg

Condition: used, Year of construction: 2017, sheet width 2070 mm plate thickness 25 mm pre-bending 18 diameter of upper rolls 320 mm side roll diameter 260 mm diameter of lower rolls 320 mm 26 kW 8100 kg 4700 x 2000 x 2200 mm Features: - Hydraulic side roller adjustment - Conical bending device - 2 driven rollers - Hardened rollers - Hydraulic folding bearing - Mobile control panel - Foot switch - Safety device Fjdpfewc D Dxex Ah Uepp - CE mark

Condition: new, Year of construction: 2025, Cutting length 3200 mm Cutting height 1600 mm Motor output 1,3 kW Dimensions (L/W/H) 4000x1500x2000 mm machine weight ab. 350 kg Fjdswiipmopfx Ah Ujpp

Condition: used, Plate roller Sheet metal roller Model: Electric Manufacturer: Gosmeta Type: PW.2050 Max. Sheet-width: 2000mm Max. Sheet-thickness: 5mm Rolls-diameters: 150mm Machine-dimensions: 2800x1050x1200mm - Documentation available: No Financial information Fjdpfx Aownhdyeh Uepp VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate Fsdexryzispfx Ah Uepp -Clamping plate: on solid base frame -Clamping surface: 2015 x 1000 mm -Table height: 930 mm -Plate thickness: 30 mm -Transport dimensions: 2015/1000/H930 mm -Weight: 973 kg

Condition: new, PTG - eccentric die 9 and 10 mm Ø, anvil 15°, clamping/equalising plates, PMH - Anvil 15° and others, clamping/equalising plates 6°/4° and 8°/5° POR 40/42U - eccentric die 9.5 mm Ø, anvil 9.5 mm Ø Fpsdpfspfaxuex Ah Ujp

Condition: used, functionality: fully functional, Year of construction: 1997, Used guillotine shear by Safan Fedpfxoxrf Hwj Ah Uspp Type: VS 255 4 Capacity: 2550 x 4 mm Electric back gauge with NC control

Condition: used, Year of construction: 1994, sheet width 3100 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 3.0 ° cutting gap adjustment 0.05 - 0.8 mm no. of strokes 12 - 50 Hub/min back stop - adjustable 5.0 - 750 mm oil volume 120 ltr. engine output 7.5 kW weight 6400 kg. range L-W-H 4045 x 1783 x 1750 mm Good condition (!!) According to the previous seller, with very few operating hours From a maintenance workshop Equipment: - Robust electro-hydraulic sheet metal shear * Design: Guide rail - LVD control panel centrally located on the front of the machine - Electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment * Adjustment from the front - via handwheel * Including analog value display - Electro-motor-driven backgauge with recirculating ball screws * Continuously variable adjustment range * Analog position display * Rapid traverse possible - Ball transfer units + recessed grips in the support table - Front finger guard - 1x freely movable foot switch - 2x emergency stop buttons at the front - Original operating instructions * Special accessories included: - LVD movable sheet support device for thin sheet metal blanks Fsdpexaap Nofx Ah Ujpp - 1x LVD extra-long side stop (3.000 mm) with Support leg - 1x LVD used set of replacement blades

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 6000x1150x2980 mm Weight 800 kg Fedpfovz Eukjx Ah Uepp Total power requirement 3 kw

Condition: good (used), Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: surface plate with adjustable feet -Length: 2000 mm -Width: 1000 mm -Height: 285 mm -Plate thickness: 35 mm -Adjustable feet: 4 pieces 240/240/H590 mm Fjdpfjxrywqex Ah Uopp -Transport dimensions: 2000/1000/H525 mm -Weight: 960 kg

Condition: good (used), functionality: fully functional, Year of construction: 1995, Used hydraulic guillotine shear by Safan Fedjxrf Emopfx Ah Uepp Model: VS 205 6 Capacity: 2050 x 6 mm Electric NC back gauge Rear safety guard

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5000x1150x2980 mm Weight 665 kg Total power requirement 3 kw Fpjdpfx Ahovz Euds Usp

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: Straightening plate with adjustable feet -Length: 2000 mm Fpodpjxryv Hefx Ah Ujp -Width: 1000 mm -Height: 285 mm -Sheet thickness: 30 mm -Adjustable feet: 4 pieces 240/240/H590 mm -Transport dimensions: 2000/1000/H525 mm -Weight: 960 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 6530x1150x2980 mm Weight 900 kg Fpedpfx Aevz Eg Hjh Ujp Total power requirement 3 kw