Used Plate Frame for sale (17,886)

Condition: used, Year of construction: 2013, length / mm width / mm height / mm Becker Vacuum Clamping System U 3.6 S-09 – 230 V – Year 2013 – Complete with Vacuum Pump, Vacuum Tank & Vacuum Table For sale is a complete Becker vacuum clamping system consisting of a Becker vacuum pump, model U 3.6 S-09, a vacuum tank (reservoir), a vacuum clamping table, and the mounting accessories shown in the photos. The system was previously used in an industrial environment and is ideal for CNC routers, machining centers, woodworking, plastics processing, fixture holding, and other vacuum clamping applications. Technical Specifications Manufacturer: Becker Fjdpfx Apjzn Aiuswegf Model: U 3.6 S-09 Year of Manufacture: 2013 Power Supply: 230 V, Single Phase Motor Power: 0.30 kW (50 Hz) / 0.36 kW (60 Hz) Speed: 1380 / 1650 rpm Inlet Capacity: 6.4 / 7.4 m³/h Maximum Vacuum: 10 mbar Protection Class: IP54 Scope of Delivery Becker vacuum pump U 3.6 S-09 Vacuum tank / reservoir Vacuum clamping table Clamping rails Mounting and clamping accessories (as shown in the photos) Condition The vacuum clamping system is in good used condition with normal signs of wear consistent with industrial use. It was removed from a fully operational machine. The sale includes everything shown in the photographs. Inspection is welcome by appointment. Shipping or collection can be arranged by mutual agreement. Plate size: 440 x 280 x 50 mm

Condition: good (used), Year of construction: 2006, sheet width 2050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 2100 mm down holder 12 Stück no. of strokes max. 26 Hub/min cutting angle 1.6 ° back stop - adjustable 750 mm Control ELGO oil volume 120 ltr. total power requirement 11.0 kW weight 3900 kg range L-W-H 2860 x 2100 x 1560 mm with only approx. 400 operating hours (!!) Original price approx. 30.000 euros Special price upon request Features: - Robust electro-hydraulic oscillating shear - ELGO digital display, Model P9521, Fgsdpfx Ajznngxepwof * for electric backgauge - NC-controlled electric motor-driven material/backgauge * Travel range continuously adjustable backgauge X = 750 mm * Backgauge with backlash-free ball screw * Travel speed: 100 mm/sec - 1x sturdy side stop * with T-slot and millimeter scale - 1x sturdy support arm - Electric cut length limiter * Cut length limiter to increase the number of strokes per minute - Manual kerf adjustment * Operated centrally from the right-hand side stand - Front support plates with ball bearings - Front finger/interference guard - Jog mode with push buttons on the left control panel - Protective guard = safety device behind the machine - Operating instructions (PDF)

Condition: excellent (used), Catalog number 7828 TECHNICAL DATA - max. width of workpiece: 200 mm - max. height of workpiece: 180 mm - 2 sanding units: - top: metal roller + sanding shoe + metal roller - bottom: metal roller + sanding shoe + metal roller - top: - 2 pressure rollers, rubber, pulling type - sanding unit - 2 pressure rollers, rubber, pulling type - bottom: Fgodpszp N Erefx Apwef - sanding unit - side guide strip - electrically adjustable sanding height, 0.37 kW - 6 feed speed settings + right/left: 2.25; 4.5; 9; 12.5; 18; 25 m/min - feed motor: 0.75 kW - main motors: 2 x 4 kW - diameter of dust extraction nozzles: 80 mm - overall dimensions (L/W/H): 1500x740x1600 mm - weight: 560 kg ADVANTAGES - Made in Germany - 2 sanding units - Unpainted - DTR documentation - Used sander, very good condition Net price: 10900 PLN Net price: 2600 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to higher fluctuations)

Condition: used, Year of construction: 2008, Product information "4-Roll Round Bending Machine" with crowning Type / Model: Nossebro 8268 30/20 Condition: Used Year of manufacture: 2008 Technical data Maximum working length: 3,040 mm Sheet thickness (max. capacity for structural steel St 37): 2.0 mm Number of rolls: 4-roll system (asymmetrical/symmetrical arrangement) Driven rolls: All 4 rolls individually driven Roll diameter (top roll): approx. 110 mm to 140 mm Motor power: 2.2 kW Fgsdpfxjzp Ip Ao Apwef Power connection: 400 V / 3-phase Equipment: CNC control Mylock 100 Request item: Transportation costs will be provided in an individual offer.

Condition: used, Rotary table, dividing head, machine rotary table Table diameter: 250 mm Table height: 95 mm Table bore: Ø 25 mm Gear ratio: 90:1 Clamping surface: 375 x 295 mm Hole spacing on clamping surface: approx. 340 mm, Ø 18 mm - Indirect division via handwheel on the worm gear, gear ratio: 90:1 Fsdpszpbrqjfx Apwsgf - Worm gear can be swiveled in and out for direct and indirect division - Clamping via 2 clamping levers in any position - 12-fold indexing and a readable degree scale on the rotary table - Crank with perforated disc - 1 perforated disc with 17, 19, 28, 32, 33, 39, 40 holes - 12 mm T-slots in the table top - Table surface slightly countersunk Overall dimensions L x W x H: 500 x 375 x 95 mm Weight: 40.5 kg Good condition

Condition: good (used), Year of construction: 1996, sheet width 3050 mm Fgodszndq Topfx Apwef plate thickness 6.5 mm thickness at "Niro-steel" 4.0 mm back stop - adjustable 750 mm work height max. 770 mm no. of strokes 11 - 22 Hub/min cutting angle 0.5 - 3.0 ° down holder 18 Stück Control SC 5 voltage 380 V engine output 11.0 kW weight of the machine ca. 5000 kg range L-W-H 3950 x 1750 x 1720 mm Features: - Electro-hydraulic / slide-guided panel shear - HACO NC control, Model SC 5, front left * Preset positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * Programmable retraction of the backgauge * Emergency stop switch - Electromotor-driven backgauge, mounted on ball screws - Hydraulic sheet metal hold-down devices - Front finger guard - 1x long side stop - 1x freely movable foot switch - Operating instructions in German (PDF)

Condition: excellent (used), Plate size: 1500 x 1500 mm Plate height: 100 mm Table height above floor: 950 mm Fgjdpfx Apezn I Uiswef Material thickness, approx.: 11.5 - 13 mm Bore diameter: 16 mm Weight, approx.: 397 kg

Condition: used, Year of construction: 2018, Please contact Gebrauchtgeräte Center for more information Fsdpfozfluzsx Apwjgf

Condition: good (used), Code: 0462 Brand: SERRMAC Model: V 22 - CE Standard Pillar drill with swivel table for machine shops, workshops, carpentry shops, and other applications - CE Standard Technical data: Sturdy construction Drilling capacity in steel diameter 22 mm Spindle taper cm2 Spindle stroke 90 mm Column diameter 98 mm Distance from column to spindle center 201 mm Table 350 x 250 mm Fgodpfjzp Exzox Apwof Spindle speed 255/380/420/560/630/660/950/990/1090/2380/2590/3850 rpm Motor power 0,55 Kw Overall dimensions mm 400 x 750 x 1700 h Weight kg 170

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, spindle diameter: 200 mm, x-travel 11,500 mm y-travel 4,500 mm w-axis 1,600 mm z-axis 2,000 mm Spindle diameter 200 mm Rotary table 3,000 x 4,000 mm Fgsdpfx Asztp Iuopwjf Bed length of rotary table 4,600 mm Tool holder SK50 Workpiece weight on rotary table 80 t Total power requirement 83 kW Additional information incl. 15 plates

Condition: good (used), Year of construction: 1983, travel distance X-axis: 6,000 mm, Spindle diameter: 200 mm Machining width: 6000 mm Machining height: 3150 mm Max. machining depth: 1985 mm Slide cross section: 530 x 550 mm Table load capacity: 20 t Plate field size: 11200 x 5550 mm Tool holder: SK 60 Machine weight approx.: 173 t Additional information: Fgedpfx Apeztp Ibswef - Additional equipment: large and small angular heads - Listing No.: 22979 - The table is model S20 MP, size: 2200 x 2500 mm - The machining width on the X-axis of the machine is 6000 mm - Including 6 plates measuring 5600 mm x 1850 mm

Condition: new, Filter plates (250 - 1200 mm) for all filter presses in all sizes and qualities, short delivery times, ask us Fedpjikl Uisfx Apwsgf Location is 58762 Altena

Condition: excellent (used), Year of construction: 2007, Technical data: Working length: 2550 mm Max. bending capacity for small diameters: 12.0 mm Bending capacity from diameter 900 mm: 18 mm Fjdpfxsztckio Apwogf Bending allowance: 10 / 12.0 mm Roller diameter: 310 mm Hydraulic folding bearing Drive power: 11 kW Lateral bending support Sheet metal holding device Digital display Dimensions (length x width x height): approx. 4200 x 1500 x 1650 mm Weight: approx. 10 tons Condition: Overall in very good condition, used only sparingly. The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1999, cutting width 3000 mm Numbers of torche 1 Fgodpfx Aszmy Tbopwjf Cutting system Plasma PA-S 150 total power requirement 4,5 kVA weight of the machine ca. ca. 8-12 t required space 16000 x 5000 mm

Condition: used, Year of construction: 2019, functionality: unexamined, API Heat Transfer SIGMA M37 SBV plate heat exchanger in good industrial condition. Specifications: Manufacturer: API Schmidt-Bretten GmbH & Co. KG Brand: API Heat Transfer Model: SIGMA M37 SBV Year of manufacture: 2019 Maximum operating pressure: 10 bar Operating temperature: 0–120°C Heavy-duty stainless steel plate heat exchanger Suitable for industrial process applications Complete frame with plate pack and tightening bolts The unit is offered as removed from service. Fgjdpfxszrnfce Apwsf Sold as is, where is, without warranty. Delivery terms: EXW Rotterdam, The Netherlands, loaded onto your truck. Inspection is possible by appointment.

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Fjdpjthuzpsfx Apwegf Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: used, Fixed angle clamping table, fixed machine table, clamping angle, angle table for milling machine Clamping surface: 700 x 260 mm Table size: 785 x 310 mm (external dimensions) Slot width: 12 mm Slot spacing: 50 mm - for table mounting surface at 90° - Table top with 5 T-slots - Mounting surface 90° = 600 x 195 mm, hole spacing center-to-center 560 x 125 mm with Ø 12 mm elongated hole, 12 mm guide slot Dimensions L x W x H: 785 x 320 x 263 mm Fodsznn Hlopfx Apwegf Weight: 80 kg Good condition

Condition: used, empty load weight: 469 kg, Year of construction: 2020, Year of construction: 2020. Engine: Hatz. 1D81Z Diesel Plate width: 70 cm. Impact force: 65kn. Electric start Forward/Reverse. Fgjdpfeyh Rzwsx Apwof Price: € 2.950,- ex. VAT

Condition: used, fuel type: gasoline, empty load weight: 199 kg, Year of construction: 2018, Honda Petrol Hand start. Weight: 199 kg Fgjdpfsxw H Hvsx Apwjf Impact force: 30kn Plate width: 50cm Forward/reverse Price: €1.700,- ex. VAT Several in stock!!

Condition: used, fuel type: diesel, empty load weight: 484 kg, Year of construction: 2019, Weight: 484 kg Impact force: 59 kn Diesel, 1 cylinder Hatz (1b40)\ Forward/reverse. Electric start. Plate width: 60 cm Price per unit: € 3.400,- ex. VAT Fjdpfx Aexw H Hcspwogf Several in stock!

Condition: reconditioned (used), Year of construction: 2014, Working width 4000 mm Working height 2550 mm Number of cylinders 6 St. S+S Bavaria 2000 L window frame and sash press The press will be partially reconditioned at our warehouse prior to pickup. Technical specifications: - Working dimensions: 4000 mm x 2550 mm (length x height) - Abutment and pressure plate depth: 100 mm - Automatic press cycle for "mortise and tenon" corner joints - hand control for manual pressing mode - 1 central pressure beam (accommodates heights up to 2550* mm) - 1 transverse pressure unit - 1 shut-off valve for the 3rd vertical cylinder Fgedpozpblkjfx Apwjf - 1 shut-off valve for the upper horizontal cylinder - 3 controls for angled window processing (vertical cylinders) - 3 attachable pivoting pressure plates for pressing angles up to 60 degrees - 2 extensions for pivoting pressure plates (for triangular/pointed windows) - All pressure plates and abutments faced with plastic - Control cabinet located on the inside of the left base leg - Press can be completely disassembled if required (price on request!) - Finish: RAL 7035 Light Grey and RAL 7016 Anthracite Grey Image shows an archive photo of a delivered press. No original photos available yet. (Technical specifications provided by the manufacturer – subject to change/no guarantee)

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Features and technical data: 2-jaw drill chuck up to 20 mm shank diameter Pneumatic positioning adjustment on 2 levels 0-100 mm Max. drilling depth: 150 mm Precision indexing rail 12 mm Fedpfx Apow I Uy Tjwsgf Center locking and cross adjustment 2 pneumatic safety clamping cylinders Motor 1.5 kW Speed: 2800 rpm Long hole drilling device, lowerable, with 2 program cams Machine weight approx. 310 kg Machine dimensions (W x D x H): 1100 x 1100 x 1500 mm (without stop) Availability: short-term Location: Röllbach

Condition: new, Steel Frame Automatic Nailing Bridge A fully automatic nailing station for nailing or stapling sheet materials in accordance with the design specifications including the following functions: ​ 1. Nailing or stapling of sheeting 2. Routing of openings or overhangs 3. Application of breather membrane 4. Nailing or stapling of battens ​ Specification Full PC control with 17” touch screen Interactive display of operation being performed Automatic download from drawing software. Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1300mm minimum panel height Fsdpjdzc Rxsfx Apwsgf Maximum panel height up to 3.5m (optionally extendable) Maximum panel length 6m – optionally up to 13m 400mm wide heavy duty work tables 825mm working height 300mm maximum panel thickness (optionally 5000mm) Motorised table opening with automatic brake locking Bridge mounted with one nailing / stapling tool mounting as standard. (Options for 2 or 3 nailing tool mounts) Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail & Mitek. Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional electrically driven sheet feeding system, including automatic sheet feeding and height indexing of the support table. Optional router unit with 4kw motor - servo drive controlled Optional Equipment ​ Table with rails mounted for bridge Additional price per meter for table with rails mounted Independent rails to travel 8m over one 6m capacity table (16m of rail in total) Additional price per meter of rail Working table for holding panel 6m (no rails mounted) Additional price per meter for table Motorised chains rather than manual rollers - initial cost Price per meter for motorisation Baton positioning guiding arrangement Additional tool mount Paper roll clamp, holder and software Electric paper cutting Panel thickness of 500mm Saw blade in X, Y, Z & C axes 350mm max panel thickness Saw blade in X, Y, Z & C axis 500mm max panel thickness. Inclination of the sawblade to one fixed angle Router complete with frequency inverter, mounted on the bridge for routing out openings in the panels. Complete with software controls and dust extraction.

Condition: new, A self assembly heavy duty modular timber frame table suitable for framing and boarding of panels. The modular 2m or 3m x 1m tables can be assembled in various configurations, to suit either wall panels or floor cassettes. 4 off 2m / 3m x 1m Modular tables suitable for frames up to 4m / 6m x 2.8m PLY top with channel for fitting (optional) pop up rollers Complete with: 1 fixed infill for spacing the table to 2.8m capacity Fedpfxon Up R Is Apwegf 1 sliding infill for supporting subcomponents inside the panel. 9m of fixed fence (6m length x 3m width) Working Height 700 - 850mm

Condition: new, A complete working station for the production of timber frame walls including the following functions 1. Framing of the wall 2. Application of cladding 3. Nailing or stapling of cladding 4. Drilling and Routing of openings and overhangs 5. Application of breather paper 6. Nailing of battens 7. Gluing of sheeting material to frames Specification Fsdpjb Tmrvjfx Apwegf Full PC control with 2 off 19” touch screens Interactive display of framing for panel assembly Automatic download from drawing software Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1500mm minimum panel height Maximum panel height 6m Maximum panel length 20m 825mm working height 500mm maximum frame height Motorised table opening with automatic brake locking Independent retractable clamping system, for the complete access of nail guns along top and bottom rails, to enable square and accurate clamping of the panel Framing tools driven to the required position via a servo drive motor, with heights controlled by software Bridge mounted with nailing / stapling tool as standard. Options for other tools to be mounted Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail, DDS, Mitek.& Inventor Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Selection of multiple nail positions in both automatic and manual modes Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional stud/sheeting carriage enabling studs to remain adjacent to the operator whilst assembling the frame.