Used Plate Frame for sale (19,267)

Condition: used, Year of construction: 2000, length 2750 mm width 1400 mm height 340 mm Dodpfxjznnd Ro Ab Njwc total power requirement 0 kW weight of the machine ca. 3 t dimensions of the machine ca. 2750 x 1400 x 340 mm Marble table as a surface plate. It was the bottom part of a Zeiss measuring machine. Size is 2750 x 1400 x 340 mm.

Condition: excellent (used), Year of construction: 2009, Single Cassette Autoloader SA-L 8000 Extra Cassette für SA-L 8000 PLATE STACKER PST 480C Dwedpfx Abjzqudcj Nec Plate Size Max: 1,160 x 940 mm Plate Size Min: 450 x 370 mm 20 plates/hr at 2,400 dpi

Condition: good (used), Year of construction: 2014, Approx. 200 units. Frames from a Stow picking tower, approx. 7–8 m high, used: Price per meter of frame: €10.00 (net) ex-works, disassembled, packaged, and loaded! If you are interested, the entire picking tower with the 7 storage and retrieval machines is also available! Price upon request. Manufacturer: Stow Type: 32 Year of manufacture: 2014 Frame depth: approx. 1.40 m Frame height: approx. 7–8 m, frame height (exact measurement still to be determined) Frame width: approx. 12 cm Approx. 200 units Condition: good to very good Dodszqz Uhepfx Ab Nowc Available: from approx. Q4/2026 Location: Hamburg

Condition: good (used), functionality: fully functional, overall weight: 810 kg, total width: 1,000 mm, total length: 1,500 mm, plate height: 350 mm, machine base height: 670 mm, space requirement width: 1,000 mm, space requirement length: 1,500 mm, space requirement height: 1,190 mm, -KOM 3183- Here, we offer a mounting plate. The mounting plate is in good used condition. The feet have a thread, which allows the height to be adjusted between approximately 600 mm and 670 mm. Technical data: Table dimensions (without feet): approx. 1000 mm x approx. 1500 mm x approx. 520 mm Foot height (min.): approx. 600 mm Dwjdszwc E Iepfx Ab Njc Foot height (max.): approx. 670 mm Foot diameter: approx. 350 mm Total weight: approx. 810 kg (including two pallets)

Year of construction: 1990, condition: used, Capacity: 250 hl/h Dwsdpfxozty Hne Ab Njc Pressure: 16 bar Length: 3.000 mm Width: 750 mm Height: 2.246 mm Weight: 3150 kg Material: plates: 1.4404/0,8mm 196 WAP, 59 HHP, 3 AP / seals: Perbunan PRESS IN Base construction: clamping screw cap NIRO pedestal Features: 4-stages (heater, hot holding section, regenerative heat exchanger, pressure reduction), connections: DN65

Condition: used, Year of construction: 1999, Capacity: 350 hl/h Dwjdpfezty Tuex Ab Nsc Operating over pressure: 24 bar Desing temperature: 104 °C Length: 1,6 m Width: 0,85 m Height: 2,2 m Weight: 5000 kg Features: product pump H: 9,8 bar (Hygiana CN II, GEA, 350 hl/h), booster pump H: 4,7 bar (EURO Hygia CN II, GEA, 350 hl/h), hot water pump H: 1,3 bar (Maxa -DIN 80-2ßß 4/4, GEA, 700 hl/h)

Condition: good (used), Workbench, work table, assembly bench, assembly table, work table, base -Base frame: Work table tubular frame frame with mounting plates for swivel casters -Width: 1200 mm -Depth: 800 mm -Height: 720 mm -Quantity: 1x workbench available -Weight: 29 kg Djdszru Tmepfx Ab Nowc

Condition: used, each with 26 stations with divider plate Dwodpszx Ug Tefx Ab Nsc suitable for 52 blocks : - dimensions 1 full block per station -> 1.070 mm x 530 mm - dimensions 2 blocks per station -> 528 mm x 530 mm max. thickness blocks 100 mm suitable for cooling with ammonia or freon (not included) dimensions (l x w x h) : ± 4.000 x 1.700 x 1.300 mm 26 blocks weighing ± 26 kg or 52 blocks weighing ± 13 kg ± 1.380 kg / Cycle (2h30)

Condition: excellent (used), Year of construction: 1988, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 370 mm, roller (top) diameter: 370 mm, side roll diameter: 280 mm, sheet thickness (max.): 20 mm, overall weight: 13,500 kg, total length: 6,900 mm, total width: 2,100 mm, total height: 2,100 mm, New ( 2026) Digital read out position side rolls Hydraulic drop end Minimum bending diameter 420 mm Full hydraulic machine Roll quality C60 900N/mm2 Dodpfezxxgwox Ab Nswc Rolling width: 3100mm Rolling thickness 3x toproll Ø:15mm Rolling thickness 5x toproll Ø:20mm Rolling thickness prebending: 12mm Top Roll Ø: 370mm Bottom Roll Ø: 370mm Side roll Ø: 280mm Number of rolls: 4 Rolling speed: 0 - 4 Adjustiment lower roll: 0 - 700mm/min. Adjustment side rolls: 0 - 200mm/min. Number of driven rolls: 2 Power: 15kW Length: 6900mm Width: 2100mm Height: 2100mm Weight: 13500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, three-jaw chuck diameter: 630 mm, STOCKLIST NEW BISON CHUCKS Chucks in Original wooden Boxes ===== 1 x 4344-630-8 1 x 4344-315-11 1 x 4334-630-8 1 x 4334-500-6 1 x 3204-160 1 x 4305-800 (JAWS) 1 x 3244-400-8 1 x 3544-400-11 3 x 4344-400-6 1 x 3704-250-6 1 x 4344-250-6 1 x 3514-250-6 1 x 3744-400-11 1 x 3704-400 1 x 3544-400-8 1 x 3245-400-8 2 x 4334-400-8 2 x 4344-400-8 1 x 3434-315-8 1 x 4344-200-6 1 x 3704-315 1 x 4344-250-8 1 x 3204-200 Dsdpjqpg Hyefx Ab Njwc 1 x 3234-200-5 Please always check if still available! Delivery: EXW – NL

Condition: excellent (used), 0.75 kW motor Working height: 205 cm Working length: 300 cm Working width: 8 cm 4 upper clamping jaws Dwsdpfezu Ndrjx Ab Noc 2 lateral clamping jaws

Condition: good (used), Technical data for the frame profile: Shelving system: Stow Type: Pallet rack NS Included in the scope of delivery: 1x Frame profile, used Material color: RAL 5015 blue Frame type: PLFB 155 Frame profile dimensions: 100 x 65 x 2.25 mm Frame height: 3,100 mm Your contacts at our company: Mr. Andre Evering Dedpfezxc A Njx Ab Njwc Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any further desired transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: used, Year of construction: 1973, sheet width 1500 mm plate thickness 5 mm weight 3,8 t Dwjdpfx Abozxt Tre Nsc

Condition: used, each with 32 stations with divider plate Dwjdpfx Aszxrkvob Noc suitable for 64 blocks : - dimensions 1 full block per station -> ± 1070 mm x 530 mm - dimensions 2 blocks per station -> ± 535 mm x 530 mm max. thickness blocks 100 mm suitable for cooling with ammonia or freon (not included) dimensions (l x w x h) : ± 4.710 x 1.600 x 1.120 mm 32 blocks weighing ± 26 kg or 64 blocks weighing ± 13 kg ± 1.664 kg / Cycle (2h30)

Condition: used, each with 38 stations with divider plate suitable for 76 blocks : - dimensions 1 full block per station -> ± 1.070 mm x 530 mm - dimensions 2 blocks per station -> ± 535 mm x 530 mm max. thickness blocks 75 mm suitable for cooling with ammonia or freon (not included) Dwsdozxrlaopfx Ab Nec dimensions (l x w x h) : ± 4.548 x 1.600 x 1.120 mm 38 blocks weighing ± 20 kg or 76 blocks weighing ± 10 kg ± 1482 kg / Cycle (2h30)

Condition: excellent (used), overall weight: 10,000 kg, total height: 400 mm, total length: 6,280 mm, total width: 2,100 mm, T slotted bed plate STOLLE - SDT MACH-ID 9775 Make: STOLLE Type: SDT Floorplate Length: 6280mm Floorplate Width: 2100mm Height: 400mm No. Of T-slots: 7 Distance from T to T-slot / Jump:300mm T -slot size: 35mm Weight a plate approx.: 10000kg Number of matching pieces: 1 Length: 6280mm Width: 2100mm Height: 400mm Dwedpfx Abszrl A So Njc Weight: 10000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, The deep girders are suitable for a support depth of 1,100 mm and a crossbar width of 50 mm. Current delivery time: approx. 10-15 working days (from external warehouse). The scope of supply includes: 1x deep girder, new Material color: Sendzimir galvanized Overall length: approx. 1,108 mm Clear span: approx. 998 mm U-profile dimensions: approx. 40x100x40 mm Material thickness: approx. 3.00 mm Crossbar support: approx. 50 mm Weight/piece: approx. 6.00 kg Dwsdpsztc E Hofx Ab Noc

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring mill, T-slot plate, pallet changer -Quantity: 1 piece (a second plate is still available ID 21153) -Width: 1465 mm -Length: 4930 mm -Working height: 860 mm -Sheet thickness: 35 mm -Plate height: 315 mm -Plate with: supporting ribs -Groove width: 51 mm -Slot spacing: 292 mm -Transport dimensions: 4930/1640/H860 mm Dwodpfx Abjd Ehfle Nsc -Weight: 6155 kg

Condition: used, Year of construction: 1995, Frame grinding machine LÖWER Type LZ 1 Working width 280 mm Working height 120 mm Arbor diameter 35 mm Table length 1100 mm Dwedszynpkspfx Ab Nsc

Condition: new, number of rollers: 4, number of digital displays: 3, Equipment: cone bending device, hardened rollers, swiveling upper roller, – 4 rolls – Capacity: 1270 x 4/5 mm – Pre-bending capacity: 1270 x 3/4 mm – Hardened rolls – Cone rolling capability – Top roll diameter: 130 mm – Bottom roll diameter: 130 mm – Side roll diameter: 130 mm – Digital display for left roll movement – Digital display for central lower roll movement – Digital display for right roll movement Dwedpfjxytlqex Ab Njc – Top roll hydraulically swiveling – Steel construction ST-52 – Overload protection – Documentation – 400 V

Condition: good (used), Filter plates for chamber filter press, chamber filter plates for chamber fitters presses. Format 1000 x 1000 The Chamber filter plates made of Polypropylen, is characterized by excellent chemical resistance and easy handling, due to its low weight, The plates are cleaned befor delivered. (Example photo) Dwjdpfx Asd Ezfmsb Nec We always have good second-hand and new chamber filter plates from stock Gladbeck for your chamber filter press in all sizes. You are welcome to ask us for your requirements.

Condition: used, Used Membrane Chamber Filter Plates 1000 x 1000 PP Djdpfxjbppv De Ab Newc approx. 190 on stock

Condition: used, Used Chamber Filter Plates Dsdpfx Abjbppvys Njwc PP 1000 x 1000

Condition: good (used), Year of construction: 2006, sheet width 2050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 2100 mm down holder 12 Stück no. of strokes max. 26 Hub/min cutting angle 1.6 ° back stop - adjustable 750 mm Control ELGO oil volume 120 ltr. total power requirement 11.0 kW weight 3900 kg range L-W-H 2860 x 2100 x 1560 mm with only approx. 400 operating hours (!!) Original price approx. 30.000 euros Special price upon request Features: - Robust electro-hydraulic oscillating shear - ELGO digital display, Model P9521, * for electric backgauge - NC-controlled electric motor-driven material/backgauge * Travel range continuously adjustable backgauge X = 750 mm * Backgauge with backlash-free ball screw * Travel speed: 100 mm/sec - 1x sturdy side stop * with T-slot and millimeter scale - 1x sturdy support arm - Electric cut length limiter * Cut length limiter to increase the number of strokes per minute - Manual kerf adjustment * Operated centrally from the right-hand side stand Dwedoznngxspfx Ab Nsc - Front support plates with ball bearings - Front finger/interference guard - Jog mode with push buttons on the left control panel - Protective guard = safety device behind the machine - Operating instructions (PDF)

Condition: new, sheet width 1550 mm plate thickness 6.5 mm pre-bending 4.5 mm diameter of upper rolls 150 mm side roll diameter 130 mm Dwedpfxoxabkbo Ab Nsc diameter of lower rolls 150 mm distance max. OW zu UW 20.0 mm total power requirement 2.2 + 1.5 kW weight of the machine ca. 2370 kg. range L-W-H 3300 x 1150 x 1110 mm Exhibition machine - NEW not yet in use (!!) Special price on request Equipment: - electro-hydraulic 4-roller round bending machine * with driven top roller + bottom roller * stable welded construction - Area of application: * light to heavy sheet metal processing (steel/aluminum/stainless steel) - electro-hydraulic adjustment of the bottom + side rollers - linear guidance of the side rollers - top roller driven by robust electric motor + planetary gear - freely movable, separate control panel - hardened rollers SAE 1050 (CK 45) + crowning - conical bending device - 3x axis digital display for precise roller positions - electro-hydraulic folding bearing - operating instructions (PDF)