Used Plate Warmer for sale (11,933)

Year of construction: 1984, condition: ready for operation (used), Immediately available from business closure: Motorized four-roll sheet bending machine Manufacturer: RAS Model: 44/10 Year of manufacture: 1984 Bending length: 1020 mm Material thickness up to 4 mm Fjdpfxoyilpfo Afnsfu Drive power: 1.5 HP Weight: 800 kg Offered at EUR 2,000—plus VAT, ex location

Condition: used, empty load weight: 469 kg, Year of construction: 2020, Year of manufacture: 2020. Engine: Hatz 1D81Z Fodpfjyh Rzwsx Afnefu Diesel Plate width: 70 cm Impact force: 65 kN Electric start Forward/Reverse Price: €2,950 excl. VAT

Condition: used, empty load weight: 469 kg, Year of construction: 2017, Year of manufacture: 2017. Engine: Hatz 1D81Z Diesel Plate width: 50 cm Impact force: 65 kN Ffjdoyh Ryyopfx Afnju Electric start Forward/Reverse Price: €2,500 excl. VAT

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: PROGRAMMABLE PLATE ROLL, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: SIEMENS, number of rollers: 4, roller (bottom) diameter: 270 mm, roller (top) diameter: 290 mm, side roll diameter: 240 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 700 mm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 15 mm, overall weight: 8,000 kg, total length: 4,400 mm, total width: 1,600 mm, total height: 1,550 mm, power: 8 kW (10.88 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 3, Equipment: centralized greasing system, cone bending device, documentation/manual, emergency stop, hardened rollers, 4-roll plate bending machine NC 4 axis equipped with side support and central support, Manufacturer Imcar-Italy year 2017, model 4RH10/4NC , capacity 2500 x15mm TECHNICAL DATA: Capacity plate width 2500 mm Plate thickness 15 mm Prebend 12 mm Upper roll 270 mm Lower roll 240 mm Surface useful on rolls 2550 mm Electric 380/50 motor 7,5Kw on centralized hydraulic unit Weight 8 Ton Machine dimension 4400x 1600 x H 1550 mm Configuration: Hardened rolls very high surface resistance Conical bending attachment Digital readout NC programmable 1X central support vertical motorized ( see photo) 1X roller table with hydraulic side arm ( see photo) 1X NC controller programmable 4 axis Hydraulic rolls power driven with planetary gear unit Hydraulic side rolls on linear guideways plate prebend Open front drop-end hydraulic to unload the closed shell Safety and emergency installed Ffedpfsyg Eazsx Afnou

Condition: used, Year of construction: 1985, machine/vehicle number: 5801, Plate drilling and burning machine FDB 600, The Peddinghaus FDB 600 plate processor from the Peddimat product range is suitable for automated drilling and oxy-fuel flame cutting of flat steel and steel sheets in steel construction. CNC control SIEMENS SINUMERIC drill diameter: min ø 8, max. ø 40 mm, inner coolant drilling system Number of drilling agregates:3 pcs. Cutting system: Autogen burning equipment total power requirement: 30 kW max. workpiece height: 600 x 50 x 6000 mm Min. material size: 80 x 8 mm sheet thickness - min.:6 mm sheet thickness - max.:50 mm dimensions of the machine ca.:2,4 x 2,4 x 2,8 m Lead roller conveyor: 6 m Fjdpfxeibq Its Afnefu Outside roller conveyor: 1 m weight of the machine ca.: 6,5 t

Condition: used, functionality: fully functional, actuation type: hydraulic, roller (top) diameter: 420 mm, sheet thickness (max.): 25 mm, Hydraulic cylinder Brand: Casanova Bending length: 3,100 mm Ffedpfx Asydk D Hofnou Maximum bending thickness: 25 mm Top roller diameter: 420 mm The side rollers are raised parallel, without inclination. New control and command panel, installed and modified in 2003. Equipped with hydraulic flag and hydraulic side table. Pit dimensions: - 200x6800 mm - 555 mm depth

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: 2roll 1250x3 mm total bend, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: siemens, controller model: simatic hmi, number of rollers: 2, roller (bottom) diameter: 350 mm, roller (top) diameter: 100 mm, roller length: 1,250 mm, working width: 1,250 mm, roller height adjustment: 30 mm, working height: 700 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, overall weight: 2,800 kg, total length: 3,500 mm, total width: 1,000 mm, total height: 1,200 mm, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: centralized greasing system, documentation/manual, emergency stop, Plate bending machine 2-roll pinch total bend in one-turn. Make Faccin model HCU 1250 x 3 mm year 2009 Plate sheet max width 1200 mm Plate thickness up to 3 mm Machine fully hydraulic operated Hydraulic power unit with 5,5 kw electric motor Top roll size 100 mm Lower pinch roll size 350 mm urethane rubber coated Automatic rolling sequence programmable Vertical support hydraulic adjustable to the diameter to hold in place the round formed plate. Set of mandrel tubes interchangeable slip-on to change the rolling diameter Ffedpfx Ajygxm Usfnsu Console electric commands for manual use and automatic programmable bending cycle Safety and emergency stop system installed Manuals and schematics with the machine

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: 4roll 2600x16 mm, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: parmigiani, controller model: 4axis nc programmable, number of rollers: 4, roller (bottom) diameter: 270 mm, roller (top) diameter: 290 mm, side roll diameter: 220 mm, roller length: 2,600 mm, working width: 2,500 mm, roller height adjustment: 45 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 16 mm, overall weight: 7,500 kg, total length: 4,450 mm, total width: 1,330 mm, total height: 1,400 mm, power: 18 kW (24.47 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: centralized greasing system, cone bending device, emergency stop, hardened rollers, 4roll hydraulic plate bending machine Parmigiani VBH 2500 X 16_12 mm Used ( year 2009 ) , in optimal working condition Capacity plate width 2500 mm Plate thickness 16 mm Prebend 12 mm rated on plate yield 260 MPa min rolling dia. ID 330 mm -- Upper roll 290 mm Pinch roll 270 mm Surface useful on rolls 2600 mm Power supply 380/50 Electric motor 18 Kw on hydraulic unit Configuration Hardened rolls very high surface resistance Ffodpfxjygxldo Afnou Conical bending attachment Digital position readout of the 4 rollers NC programmable automatic plate roll Hydraulic driven two central rollers Hydraulic motion of side rollers individual in guideways dual initial pre-pinch Open front drop-end hydraulic to unload the closed shells Safety and emergency installed Manuals and schematics with the machine weight 7500 Kg layout mm 4450X1330 X H1400 mm

Condition: ready for operation (used), empty load weight: 19,000 kg, nominal power: 33.526 kW (45.58 HP), Boven- en onderrol worden aangedreven (planetaire tandwielkast) Conische buiging Automatische gelijktijdige balancering Onderste rol excentrische balk Fodpfx Afex Dd Hyonjfu Number of rolls: 4 rolls - 2 roll driven Roll capacity cold: 3100 x 32 mm Roll dia upside: 410 mm Dia under roll - side rolls: 370 - 300 mm

Condition: good (used), Year of construction: 2006, sheet width 3100 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3120 mm down holder 14 Stück cutting angle 1°5 no. of strokes 14 Hub/min control ENC 100 table width 500 mm work height max. 880 mm oil volume 170 ltr. total power requirement 11.0 KW weight 5550 kg range L-W-H 3750 x 1950 x 1650 mm Machine was used for ALU processing no "heavy" sheet metal processing good condition (!) new price ~ 32.000 Euro - in checked conditions - machinevideo - ?v=o2LW7L2r7Xs ----- Swing cut guillotine shear with fixed cutting angle * with DURMA ENC 100 NC control unit * manual cutting gap adjustment from the front ----- Equipment: - electro-hydraulic guillotine shears "swing cut" - with DURMA "ENC 100 NC" control unit * Backgauge preselection - X axis * Number of pieces (in automatic mode) * Control panel, front left * Retraction from backgauge on/off * Input of target/actual value procedure with button - NC electro-motorized backgauge (X axis) * on recirculating ball screws * Traversing speed 120 mm/sec. - Manual cutting gap adjustment, from the front - hydraulically acting hold-down device - 1x side stop 1,000 mm - 2x front support arms Fsdsycxgmspfx Afnefu - Ball rollers in the front support table - Light barrier behind the machine (safety device) - 1x free-moving foot switch - Rear sheet metal chute - Operating instructions

Condition: new, Year of construction: 2026, Extremely powerful industrial magnet for iron separation Special price: €990 net (shipping €14.90 net) *Construction lengths can be found in image 2 The active side is equipped with a stainless steel end plate (material 1.4301). Threaded holes are provided on the rear side for mounting; *handle available on request The block magnet systems can be used at temperatures of up to max. +100°C operating temperature. The magnet surface should be cleaned regularly from captured iron parts. Pickup distances for all types, for example: For a steel nut M5: approx. 60 mm For an M5 x 30 screw: approx. 100 mm Mounting example 1: Mounted above a conveyor belt, 'iron parts jump onto the holding surface of the magnet.' Ffjdpfx Afetqfhxjnou Mounting example 2: Mounted within a pipeline system with direct contact to the material flow. For maximum separation safety, a cascade setup of multiple block magnets in series is possible. Assembly and safety instructions: When handling, already upon unpacking and later during installation, ensure that there are no loose iron parts, such as tools or screws, nearby. The magnetic force is so strong that painful injuries may occur if fingers get caught between iron parts and the active surface. There should be no steel parts under the active surface within a minimum distance of 400 mm.

Condition: good (used), Clamping plate, welding table, welding table, straightening plate, perforated plate -Dimensions: 2280/1060/40 mm -Table height: 960 mm -with supporting ribs Ffsdpfxeb A Nbno Afnou -Cast iron plate -Weight: 1050 kg

Year of construction: 2008, condition: good (used), Item: D-7802-APV-Heat Exchanger Stainless Steel Heat Exchanger Type APV H17, Temperature max. 110 C From 2008. Nominal Capacity: 20,5 kW Transmission: 2,7 m2 Ffsdef Srmzopfx Afnou Press: 4,5 Bar

Condition: used, functionality: fully functional, Year of construction: 1987, machine/vehicle number: 101536, Offered for sale is a hydraulic guillotine shear Manufacturer: Eisen und Hammerschmidt GmbH Model: TSS4-20 Year of manufacture: 1987 Serial No.: 101536 Capacity: 4 mm Working width: 2,000 mm Control: ELGO Type P8511 Light curtain system by SICK Used, fully functional condition. Collection by purchaser; assistance with dismantling/transport can be arranged if required. — Ffjdpfx Afsx Da D Uoneu If you are interested or have any questions, please feel free to send me a message. Viewing on site by appointment possible. Further metalworking machinery such as bench drills, press brakes, column drilling machines, eccentric presses, heavy-duty racking, welding tables, MIG welders, compressors, etc. – please take a look at my other listings. Location for viewing and collection: 12277 Berlin Domestic price net plus VAT or Net export price Collection only – dismantling and transport by buyer or by arrangement. If you are interested or have any questions, please feel free to send me a message. Further photos and technical details available on request. All information is subject to change without notice. Errors and prior sale reserved. For further questions, please call Nous parlons Français / Мы говорим по-русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype We handle all customs and registration matters for an additional charge. For an extra fee, we can transfer the vehicles to the port.

Condition: used, tank capacity: 8,310 l, GENERAL INFORMATION Equipment: Crane lugs Design: rectangular Remarks: Each tank contains 2 cooling plates inside; 1 manhole approx. 340 x 440 mm in the front base; some feet are shimmed (see photos) Total width: 1,420 mm Total height: 2,550 mm Total length: 3,200 mm Fsdpfx Ajyckt Esfnofu Heating/Cooling: available Location: Bremen Volume: 8,310 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Previous application: wine storage TANK Mounting type: feet Number of feet: 4 HEATING/COOLING JACKET Internal tempering: cooling plate EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Material of tempering system: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 8,750 l, GENERAL Design: rectangular Comments: Each tank contains 2 cooling plates inside; 1 manhole approx. 300 x 400 mm in the front bottom; feet equipped with loose, height-adjustable spherical cap screws (possibly not all feet complete; cap screws not included in the total height, total height will increase accordingly if used); feet are slightly off-set Overall width: 1,620 mm Overall height: 2,700 mm Overall length: 2,950 mm Heating/Cooling: available Location: Bremen Nameplate: Volume: 8,750 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last use: wine storage TANK Mounting: feet Number of feet: 4 pcs HEATING/COOLING JACKET Temperature control inside: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature system material: stainless steel Foot material: stainless steel Fsdpfxeycktro Afnjfu

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, x-travel 11,500 mm y-travel 4,500 mm w-axis 1,600 mm z-axis 2,000 mm Ffjdpfxsyiphhs Afnsu Spindle diameter 200 mm Rotary table 3,000 x 4,000 mm Bed length of rotary table 4,600 mm Tool holder SK50 Workpiece weight on rotary table 80 t Total power requirement 83 kW Additional information incl. 15 plates

Condition: good (used), Year of construction: 1983, travel distance X-axis: 6,000 mm, Spindle diameter: 200 mm Machining width: 6000 mm Machining height: 3150 mm Max. machining depth: 1985 mm Slide cross section: 530 x 550 mm Table load capacity: 20 t Plate field size: 11200 x 5550 mm Tool holder: SK 60 Machine weight approx.: 173 t Fodpfeyipgdsx Afnjfu Additional information: - Additional equipment: large and small angular heads - Listing No.: 22979 - The table is model S20 MP, size: 2200 x 2500 mm - The machining width on the X-axis of the machine is 6000 mm - Including 6 plates measuring 5600 mm x 1850 mm

Condition: new, The scope of delivery includes: 25x new leveling plates Suitable for manufacturer: Mecalux Material color: Sendzimir galvanized For frame profile: P 101 Material thickness: 1.00 mm Total width: 155 mm Total depth: 110 mm Fjdpjwa Npzofx Afnsfu Hole diameter: 15 mm Number of holes: 2 Weight | Unit: 0.130 kg Your contact person in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: good (used), Included in the delivery: 01x Base plate, new Manufacturer: Arestant NS Type designation: STD Base Plate BP80 Material finish: Sendzimir galvanized For frame profile width: 80 mm Material thickness: 6.00 mm Total width: 118 mm Total depth: 150 mm Fedpfexgp E Tex Afnefu Height: 45 mm Number of mounting holes: 03 pcs. Hole diameter: 13 mm Weight per unit: 0.83 kg / pc. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about this item: This item is offered for collection only. If transport or shipping is required, additional costs will apply, which can be requested from us depending on the delivery location and scope of supply.

Condition: new, The scope of delivery includes: 01x shim, new Ffedpstdb T Esfx Afnsu Manufacturer: Stow Material color: sendzimir galvanized Total width: approx. 120 mm Total depth: approx. 140 mm Material thickness: 1 mm Weight: approx. 0.125 kg | pc. Currently available in stock: approx. 2,500 pcs. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This item is only offered for collection. Any additional transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), The scope of delivery includes: 01x printing plate, used Material color: blue Dimensions: approx. 200 x 95 mm Material thickness: approx. 5 mm Number of drill holes: 02 pcs. Drill hole Ø: approx. 15 mm Weight per piece: 0.750 kg Your contact persons in our company: Ffodpfst N T A Uex Afneu Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), Technical data for the locking bracket: Manufacturer: SSI Schäfer Scope of delivery includes: 01x Locking bracket, used Material color: Sendzimir galvanized Leg "A": approx. 35 mm Leg "B": approx. 53 mm (support surface, see description) Incl. spacer block (grey) Internal dimension "C": approx. 22 mm Material thickness: approx. 2.00 mm Weight per piece: approx. 0.120 kg Note: Ffsdpfx Afjpgndgjnsu Thanks to the included spacer block, the Z-bracket can be used for various beam widths from 40 to 60 mm! Quick overview / Application area: - Without block for beam width 60 mm (e.g., for INP) - With block (small side inside) for beam width: 50 mm (INP or box profile) - With block (large side inside) for beam width: 40 mm (INP or box profile) General information about the item: This item is available for pickup only. Additional shipping or transport services are subject to extra charges, which can be provided upon request depending on the delivery location and quantity.

Condition: new, The scope of delivery includes: 01x shim, new Manufacturer: Stow Material color: sendzimir galvanized Total width: approx. 120 mm Total depth: approx. 140 mm Material thickness: 3 mm Fodpfx Aetda Sdefnjfu Weight: approx. 0.38 kg | pc. Currently available in stock: approx. 2,610 pcs. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This item is only offered for collection. Any additional transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), functionality: fully functional, Year of construction: 2000, sheet thickness steel (max.): 16 mm, back gauge: 1,000 mm, cutting length (max.): 3,150 mm, foot switch Fedsv Syyvopfx Afnjfu motorized arrester behind cutting angle adjustment Technische Daten / technical details: Schnittleistung / max. cutting capacity 16 mm max. Schnittlänge / max. cutting length 3150 mm Anschlag / limit stop 1000 mm Gewicht der Maschine / weight 16300 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.