Used Portable Sawmill for sale (1,383)

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 2,834 h, load capacity: 5,000 kg, lifting height: 4,500 mm, free lift: 2,200 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, motor manufacturer: DEUTZ, gearing type: hydrostat, fork carriage width: 1,350 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: pneumatic tires (air-filled), front tire size: 8.25 R15, rear tire type: pneumatic tires (air-filled), rear tire size: 8.25 R15, overall weight: 14,500 kg, empty load weight: 9,500 kg, total height: 2,650 mm, total length: 4,650 mm, total width: 2,100 mm, color: yellow, Equipment: CE marking, cabin, centralized greasing system, fork extension, lighting, pallet forks, # COMBILIFT C5000FSL | DIESEL | DUPLEX 4500 MM | FREE LIFT | FORK POSITIONER | FULL CAB 🚜 🔧 FULLY SERVICED | 🛡️ WARRANTY | 🌍 WORLDWIDE DELIVERY If you are looking for a professional sideloader designed for the safe and efficient handling of long and heavy materials, this COMBILIFT C5000FSL is an excellent solution for demanding industrial applications. We are offering a used COMBILIFT C5000FSL diesel sideloader from 2018, equipped with a duplex mast, 4500 mm lift height, 2220 mm free lift, hydraulic fork positioner, and full operator cabin. Before delivery, the machine will undergo a comprehensive technical inspection, full service, and operational testing. 🔧✅ ## ⭐ KEY ADVANTAGES * 💪 5000 kg load capacity * ⏱️ Only 2849 operating hours * ⚙️ Reliable DEUTZ diesel engine * 📏 Duplex mast – 4500 mm * ↕️ 2220 mm free lift * ↔️ Hydraulic fork positioner * 🏗️ Full operator cabin * 📷 Camera system * 📦 1200 mm load platform * 🛡️ Warranty available * 🎥 Live online demonstration * 🚛 Direct delivery * 🌍 Worldwide transport Dodpfx Ais Agknne Eskw ## 📋 TECHNICAL SPECIFICATIONS Manufacturer: COMBILIFT Model: C5000FSL Type: Sideloader Forklift Year: 2018 Serial Number: 40353 Capacity: 5000 kg Engine: DEUTZ Diesel Operating Hours: 2849 h Mast: Duplex Lift Height: 4500 mm Free Lift: 2220 mm Fork Positioner: Hydraulic Fork Positioner Width: 1350 mm Forks: 1200 mm | 150 x 50 mm Cab: Full Operator Cab Service Weight: approx. 9530 kg ## 📐 DIMENSIONS Overall Height: 2650 mm Lowered Mast Height: approx. 3170 mm Length: 4650 mm Width: 2100 mm Platform: 1200 mm ## 🛞 TIRES Front: Pneumatic Rear: Pneumatic Tires will be inspected during pre-delivery preparation. ## 🔧 PROFESSIONAL PRE-DELIVERY PREPARATION Before delivery, the forklift undergoes comprehensive inspection and servicing, including: * ⚙️ Engine and drivetrain * 💧 Hydraulic system, hoses, and connections * ⛓️ Mast, chains, and lifting components * 🛞 Steering system * 🛑 Braking system * ↔️ Forks and fork positioner * 🛞 Tires and wheels * ⚡ Electrical system * 💡 Working lights * 🦺 Safety systems * 🛢️ Oils, filters, and operating fluids The machine is operationally tested and prepared for immediate use at the customer's facility. ✅ ## 🏭 IDEAL FOR * 🪵 Timber and sawmill industry * 🔩 Steel mills and service centers * 🏗️ Structural steel * ⚙️ Metal and aluminum processing * 🔧 Pipes and profiles * 📏 Long steel sections * 📦 Long and bulky loads * 🏭 Manufacturing facilities The sideloader design makes the C5000FSL ideal for handling long materials while maintaining excellent maneuverability. ## 🏆 WHY FT LOGISTICS? We specialize in COMBILIFT forklifts, multidirectional forklifts, and sideloaders. Every used machine undergoes professional inspection, servicing, and testing before delivery. ## 🤝 WE PROVIDE 🔧 Full pre-delivery service 🛡️ Warranty options 👨‍🔧 Technical support 💶 Leasing and financing 🚛 Worldwide transport 📄 Export and customs documentation 🎥 Live online demonstration 📸 Additional photos and videos # FT LOGISTICS 🚜🌍 We deliver machines that are ready to work. ✅

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 6,420 h, load capacity: 5,000 kg, lifting height: 4,040 mm, free lift: 1,975 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, motor manufacturer: DEUTZ, gearing type: hydrostat, fork carriage width: 1,350 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: pneumatic tires (air-filled), front tire size: 8.25 R15, rear tire type: pneumatic tires (air-filled), rear tire size: 8.25 R15, overall weight: 14,500 kg, empty load weight: 9,500 kg, total height: 2,650 mm, total length: 4,650 mm, total width: 2,100 mm, color: yellow, Equipment: CE marking, cabin, centralized greasing system, fork extension, hydraulic fork positioner, lighting, pallet forks, # COMBILIFT C5000FSL | DIESEL | DUPLEX 4040 MM | FREE LIFT | FORK POSITIONER | FULL HEATED CAB 🚜 🔧 FULLY SERVICED | 🛞 NEW TIRES | 🛡️ WARRANTY | 🌍 WORLDWIDE DELIVERY If you are looking for a reliable and powerful sideloader for handling long and heavy materials, this COMBILIFT C5000FSL is an excellent solution for demanding industrial applications. Manufactured in 2018, the machine features a reliable Deutz diesel engine, Duplex mast with 4040 mm lift height, 1975 mm free lift, hydraulic fork positioner and full heated cabin. Before delivery, the forklift undergoes comprehensive inspection, servicing and operational testing. It is also equipped with 100% brand-new pneumatic tires. 🛞✅ ## ⭐ KEY ADVANTAGES * 💪 5000 kg load capacity * ⚙️ Deutz diesel engine * 📏 Duplex mast – 4040 mm * ↕️ 1975 mm free lift * ↔️ Hydraulic fork positioner * 🔥 Full heated cabin * 🛞 100% brand-new pneumatic tires * 📦 1200 mm platform * 🍴 1200 mm forks * 🔧 Fully serviced and tested * 🛡️ Warranty available * 🎥 Live online demonstration * 🚛 Direct delivery * 🌍 Worldwide transport ## 📋 TECHNICAL SPECIFICATIONS Manufacturer: COMBILIFT Model: C5000FSL Type: Sideloader Forklift Year: 2018 Serial Number: 38028 Capacity: 5000 kg Operating Hours: 6420 h Engine: Deutz Diesel Mast: Duplex Lift Height: 4040 mm Free Lift: 1975 mm Fork Positioner: Hydraulic Positioner Width: 1350 mm Forks: 1200 mm | 120 x 50 mm Cab: Full Heated Operator Cab Service Weight: approx. 9500 kg ## 📐 DIMENSIONS Overall Height: 2650 mm Lowered Mast Height: 3000 mm Length: 4650 mm Width: 2100 mm Platform: 1200 mm ## 🛞 TIRES Front: Pneumatic 8.25 R15 – 100% NEW Rear: Pneumatic 8.25 R15 – 100% NEW ## ⚙️ EQUIPMENT Dsdpfs Agki Hsx Ai Eekw * Hydraulic fork positioner * Duplex mast with free lift * Full heated operator cabin * Deutz diesel engine * Working lights * Brand-new pneumatic tires * 1200 mm forks and load platform ## 🔧 PROFESSIONAL PRE-DELIVERY PREPARATION Before delivery, the forklift undergoes comprehensive technical inspection and servicing, including: * Engine and drivetrain * Hydraulic system, hoses and connections * Mast, chains and lifting components * Steering and braking systems * Forks and fork positioner * Tires and wheels * Electrical and safety systems * Working lights * Oils, filters and operating fluids The machine is operationally tested and prepared for immediate use at the customer's facility. ✅ ## 🏭 IDEAL FOR 🪵 Timber & sawmills 🔩 Steel mills & service centres 🏗️ Structural steel ⚙️ Metal & aluminium processing 🔧 Pipes and profiles 📏 Long steel sections 📦 Long and bulky loads 🏭 Manufacturing facilities The sideloader design makes the C5000FSL particularly suitable for transporting long materials while maintaining excellent manoeuvrability. ## 🏆 WHY FT LOGISTICS? We specialise in COMBILIFT multidirectional forklifts and sideloaders. Every used machine undergoes professional inspection, servicing and operational testing before delivery. ## 🤝 WE PROVIDE 🔧 Professional pre-delivery service 🛡️ Warranty options 👨‍🔧 Technical support 💶 Leasing & financing 🚛 Worldwide transport 📄 Export & customs documentation 🎥 Live online demonstration 📸 Additional photos & videos # FT LOGISTICS 🚜🌍 We deliver machines that are ready to work. ✅

Condition: used, Bark remover Cambio 500 in good condition Dkedpfx Ajwi Iz Ioi Ejw

Condition: good (used), Bandsaw line for big logs 1. Log conveyor Djdpeikvlijfx Ai Eokw 2. Buffering log deck and one piece feeder 3. Log conveyor and centering infeed with turner 4. Söderhamn AKE 245A Twin reducer bandsaw (ARI 6 knife heads) 5. Board separator with block turner 6. Side transfer of blocks 7. Block infeed 8. ARI BKR-600 9. ARI DS-75 multi rip saw 10. Edging line with ARI KT-52 Edger Price: 2 100 000 SEK, in existing condition on site. Line is complete but not all conveyor in bottom floor. Bruks 1503M chipper. No power on electric cabinets (no PLC software) Can be dismantled and loaded by UJ Trading AB Sawmill is located in Sweden.

Condition: new, pinion heads for gang saw complete with ball joint pins and red brass bushes, spare part number 23 a + b or 235254-01 Dkedpfotq Eq Rox Ai Ejw

Condition: used, A compact and lightweight portable extraction system for removing wood shavings and sawdust. Technical data: - Motor: 0.37 kW - Length: 650 mm - Width: 500 mm Dkodpfoztvwvox Ai Eew - Height: 1,800 mm

Condition: good (used), EKH-455 Shrink Wrapping machine Machine ready to use. Photos show the actual product. Dkodez R Iquopfx Ai Esw Description: The main advantages of shrink wrappers include simultaneous sealing and shrinking, small dimensions, and easy portability. They are an ideal solution for shops, bakeries, warehouses, archives, bookstores, etc. They offer adjustable sealing time and heater temperature, and can also shrink PVC and polyolefin films. Technical Specifications: Power Supply: 230 V Power: 3.77 kW Maximum Product Dimensions: 520 x 390 x 250 mm Sealer Dimensions: 550 x 420 mm Weight: 125 kg

Condition: ready for operation (used), Year of construction: 2011, operating hours: 77,128 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: SIEMENS, controller model: 840D solution line, spindle speed (max.): 8,000 rpm, spindle motor power: 43,000 W, number of slots in tool magazine: 50, number of axes: 4, This 4-axis HELLER H6000 horizontal machining centre was manufactured in 2011. It features a generous X, Y, and Z-axis travel of 1,000 mm each, along with a B-axis NC rotary table. The machine is equipped with a SIEMENS 840D control unit and has a maximum permissible clamping mass of 1,000 kg. If you are looking to get high-quality machining capabilities, consider the HELLER H6000 machine we have for sale. Contact us for further details. - Operating Hours (Betriebsstunden): 77,128 h- Effective Operating Time (Nutzlaufzeit): 57,997 h- Control Unit: SIEMENS 840D solution line- X-Axis Travel: 1,000 mm- Y-Axis Travel: 1,000 mm- Z-Axis Travel: 1,000 mm- Rapid Traverse Speed: 50,000 mm/min- Feed Speed: 1 - 50,000 mm/min- Acceleration: 5 m/s²- Max. Permissible Clamping Mass: 1,000 kg- Pallet Changing Time: 13 s- Pallet Changer: 2 pallet slots- Pallet Size: 630 x 630 mm (2 units in basic machine + 1 additional pallet)- Workpiece Diameter: 900 mm (1,290 mm)- Workpiece Height: 1,200 mm- Work Unit: PC 100 PowerCutting- Speed Range: 8,000 rpm- Max. Drive Power (S6-40%): 43 kW- Max. Torque (S6-40%): 822 Nm- Workpiece Table: NC Rotary Table, indexing 360,000 x 0.001°- Workpiece Setup Station: Manually rotatable pallet 4 x 90°- Workpiece Clamping: Mechanical (includes 5-fold media interface, hydraulic pressure 60 bar)- Tool Taper: HSK 100 A (DIN 69 893)- Tool Magazine: Chain magazine with 50 slots- Max. Tool Diameter (all slots occupied): 112 mm- Max. Tool Diameter (adjacent free slots): 280 mm- Max. Tool Length: 600 mm- Min. Chip-to-Chip Time (t2,3 according to VDI 2852): 4.2 s- Coolant & Chip Management: KNOLL scraper belt chip conveyor for wet machining, KNOLL KF 400 paper band filter coolant cleaning system (70 bar internal coolant supply / IKZ), work area flushing, drip tray drawing, window blow-off device- Tool Monitoring & Accessories: Fast drill breakage control, chain magazine tool shank cleaning device, process-integrated tool monitoring + collision protection monitoring, portable handwheel unit (Bedienhandgerät) with interface- Electrical Parameters: 400 V, 50 Hz, Nominal Current 87 A Technical Specification Taper Size HSK 100 Dkedpfoz Spt Tox Ai Ejw

Condition: used, Esterer Linck debarking machine, model ELC ER 72 N 12 SR. Dksdpfxjz Dvdze Ai Esw Suitable for trunk diameters of 10 to 75 cm. Feed rate up to 70 m/min. 12 infeed and outfeed rollers. Minimum wood length: 1.80 m. Debarking rotor with 6 knives. Hydraulically pre-tensioned. Main motor: 55 kW. Feed motor: 7.5 kW with 2 speeds. Also ideal as a replacement machine, as many new parts have been installed in recent years.

Condition: used, Year of construction: 1998, LBL Brenta Oxia Dedpfxovw Rnbo Ai Ejkw -max. cutting height 150mm -max. passage width 1000mm -multi-blade saw with fixed saw attachment

Year of construction: 1970, condition: good (used), functionality: fully functional, Stenner RESAW VHL 48 Dkjdpfx Aiovuhumo Esw manufacture Stenner UK S/N J2103 year 1970 (original photos coming soon) Principal Dimensions and data: Diameter of saw pulleys: 48"= 1220mm Width of saw pulley face-standard 5" (127mm) Width of saw pulley face-optional 5 1/2" (140mm) Maximum width of saw - standard 5 1/2" (140mm ) Maximum width of saw-optional 6" (150mm)A Minimurn length of saw 25" 8" (782mm) Maximum height of top saw guide above table 28" (710mm) Table height from floor level 31 1/2" ( 800mm 9 Overall height from floor level 9.1" ( 2770mm) Overall width 8.1" (2460mm) Speed of saw pulleys,r.p.m. 8,000 (2440m/min) Horse power range 30 kW Size of fast and loose pulleys 20"x6 1/2" Feed speeds, standard; f.p.m. or m/min. 0-140 (0-42.6m) Shipping Specification : Standard Machine : Net weight, lbs. 3583 kg The VHL 48 is a band resaw of advanced design embodying many new features resulting from a close study of user-operator requirements, and the necessity to provide fast and accurate sawing coupled with ease of operation, reduced operator fatigue, low maintenance, and increased safety. The design caters fully for these essential factors which contribute to a markedly high level of operating efficiency. The machine is primarily designed for the planning mill and joinery shops. The thin bandsaw gives the machine a high timber recovery rate; the loss due to saw kerf being very low. Compared with a circular radial-arm resaw, the VHL is faster, less wasteful, and uses less power for a given class of work general The VHL is made only as, a left-hand machine, i.e. the saw pulleys run in an anti-clockwise direction when looking in the direction of the feed. The drive is normally arranged to give a saw speed of 8,000 feet permin. (2440m l/min.) Main Drive The main drive is applied to the bottom saw pulley spindle which is prepared for vee belt, flat belt, or flat belt fast and loose pulleys to suit the proposed driving unit. Complete electric motor drives, up to 40 H. P. and for most current supplies can be provided; they include two vee pulleys, set of vee belts, belt guard, motor with slide rails, starter and a master stop button which is fitted to the machine base close to the sawyer's position. horizontal rollers The horizontal rollers are 6" (152mm) diameter and extend the full opening on the fence side and 6" (152mm) beyond the table on the open side; they are normally free-running idle rollers. They can be supplied hydraulically driven as optional equipment, either with the machine or after installation; the rollers are then driven in synchronism with the main feed rolls, by a separate motor. The drive is arranged so that the open-side roller at the outfeed end rotates in the reverse direction to facilitate the return of timber to the sawyer. The roller in front of the saw is moveable sideways to permit rapid saw changing.

Condition: reconditioned (used), functionality: fully functional, approx. 4.5 m long infeed and centering table Drive via chain from the feed motor Centers the logs in the middle of the rotor Debarking machine VK 26 4 main cutters 4 pre-cutters 30 KW main motor Dksdpfxju Hmacj Ai Eow 11 KW feed unit non-driven extraction table Machine workshop checked Machine cleaned and repainted

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Log scanner with belonging electric-operating equipment and operators chair *Is a high-performance scanner. The system will operate at very high line speeds, making it the perfect choice in a modern sawmill. Dsdpot Irffsfx Ai Eokw • Provides a true image of log ovality, taper and sweep. Damage and knots are registered and taken inti consideration. • Can be used at all log measuring positions. Log sorting, log optimisation and log turning in the saw line. • Can measure bark thickness. The RS-Bark add-on can calculate the actual log shape under bark. The function can be used in combination with log pattern sorting in the log sorting line to reduce the need of diameter-based log classes. • Minimal need for calibration and service. Easy to calibrate and no need for supplier expertise in case of replacement

Condition: good (used), functionality: fully functional, Multi-blade saw H 33. Chain bed width 250 mm. Maximum cutting height 100 mm. Djdpfj Af Im Nox Ai Ejkw Feed rate, continuously adjustable up to 25 m/min. Drive motor 22 kW. Double anti-kickback protection. Includes a wide range of accessories, such as bushings, spacer rings, and saw blades. Ideal for cutting stacked strips.

Condition: ready for operation (used), Slab recovery line with below machines: Dkodpfxogwqk So Ai Eow One 2-blade board edger One single blade horisontal resaw Conveyors system between the machines included.

Condition: refurbished (used), Stacker for boards and planks manufactured by Almab. Packing machine Dodspguk Iopfx Ai Eekw

Condition: ready for operation (used), Logsorting line with 14 + 1 pockets ( 2 x 7 ) Rema system with measuring frame type 9001 Dksdpfx Aisr Hbcfs Ejw Hydraulic log kickers

Year of construction: 2011, condition: ready for operation (used), - USED - DRILLING-MILLING MACHINE LONGITUDINAL TRAVEL: 3250 mm TRANSVERSAL TRAVEL: 500 mm VERTICAL TRAVEL: 1500 mm W-AXIS: 500 mm RAPID FEEDS: 8 m/min MIN DRILLING DIAMETER: 5 mm MAX DRILLING DIAMETER: 50 mm MAX DRILLING DEPTH: 2000 mm DRILLING REVOLUTION SPEED: 4200 rpm HEAD: ISO 50 ; ±20° ; 17 kW TABLE SIZE: 2500 x 2000 mm MAX ADMITTED LOAD: 50000 Kg HIGH PRESSURE COOLANT: 80 Bar TOOL MAGAZINE: 20 POS CONTROL UNIT: HEIDENHAIN TNC 530 WEIGHT: 45000 Kg OVERALL DIMENSIONS: 6000 x 8000 x 4300 mm ACCESSORIES: SWARF CONVEYOR ; LINEAR SCALES ; Dkodpfx Aewt Er Sji Eew PORTABLE HANDWHEEL NOTE: MAX ADMITTED LOAD ON ROTARY AND SHIFTING TABLE FOR ROTATING PIECE 30.000Kg; GUNDRILLS WITH ADAPTER BUSHES; RAPID CLAMPING PLATE 2200X2500X70 mm

Condition: new, Year of construction: 2026, CORMAK TSC630 Planer Knife Sharpener is a precise and efficient machine designed for sharpening planer knives, chipper knives, shredder knives, and other machine blades used in woodworking, sawmills, and industrial production facilities. Thanks to its ability to sharpen knives up to 630 mm in length, this model is an excellent solution wherever accuracy, repeatability, and fast tool restoration are essential. Dull knives result in poorer machining quality, increased machine load, and unnecessary downtime. The CORMAK TSC630 quickly restores the perfect sharpness of machine knives, ensuring high-quality grinding results and full control over the sharpening process. Main advantages of the machine Dedey Sf Ukspfx Ai Eskw Sharpening knives up to 630 mm – suitable for most standard planer knives and machine blades within this length range. Liquid cooling system – effectively removes heat generated during grinding, protecting the cutting edge from overheating. Adjustable sharpening angle 0–90° – allows precise adjustment according to the knife type and required cutting geometry. Smooth manual feed system – linear bearing guides ensure stable and precise movement of the grinding assembly. Adjustable clamps and stops – enable quick and repeatable positioning of the knife. Ability to sharpen several thin knives at once – stacking blocks allow simultaneous sharpening of planer knives with a thickness of 3 mm. Smooth grinding wheel height adjustment – allows accurate positioning of the grinding wheel relative to the sharpened knife. Collection tank with drain opening – enables collection and reuse of the coolant. Construction and technology The CORMAK TSC630 sharpener has been designed for users who require a stable, accurate, and convenient machine for daily knife sharpening operations. The grinding assembly moves along precision linear guides equipped with linear bearings, ensuring smooth movement of the grinding wheel across the entire length of the blade. This solution provides a uniform grinding process without the risk of uneven sharpening and allows full control over the sharpening operation, even when working with longer knives. Perfectly sharp knives without overheating the cutting edge Temperature control is one of the most important factors during sharpening. The integrated liquid cooling system effectively removes heat generated during grinding, protecting the material from overheating and loss of cutting properties. Thanks to the cooling system, sharpened knives maintain the correct geometry, retain sharpness for longer, and ensure high-quality performance after being installed back into the machine. Standard equipment CORMAK TSC630 knife sharpener Corundum grinding wheel Built-in cooling system Coolant collection tank with drain opening Blocks for simultaneous sharpening of several thin knives Adjustable clamps and stops Mounting elements User manual Technical specifications Parameter Value Motor power 1.1 kW Power supply 230 V Maximum knife length up to 630 mm Maximum knife width up to 150 mm Maximum knife thickness up to 30 mm Grinding wheel speed 2800 rpm Grinding wheel diameter / height 100 / 51 mm Grinding wheel thickness 13 mm Sharpening angle 0–90° Cooling system Yes Feed type Manual, with linear bearings Machine dimensions 1000 × 465 × 610 mm Weight 55 kg

Condition: used, Belt conveyor with a modular plastic belt and a stainless steel frame. High side guides on both sides keep material on the belt. Dsdpfxo Afu Uze Ai Eekw Technical data: Length: ~5.5 m Frame: stainless steel Belt: modular plastic belt Drive: Bauer gear motor (Germany), 0.5 HP, 220/380 V, 50 Hz

Year of construction: 1997, condition: used, EWD DK90 T2L2 Combination Saw Year of manufacture: 1997 Cutting height: 15 mm - 120 mm Cutting width: 80 mm - 750 mm 4 moving blades Feed rate: 15-160 m/min 75 kW Microtec visualization system Cross conveyor - inclined conveyor - infeed table with miter saw - machine - roller conveyor with chip separator Dedpfx Aioz Nivio Eekw

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 5,244 h, load capacity: 5,000 kg, lifting height: 4,550 mm, free lift: 2,250 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,150 mm, motor manufacturer: GM, gearing type: hydrostat, fork carriage width: 1,150 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 23 X 10 - 12, rear tire type: cushion tires (black), rear tire size: 355 X 65 - 15, overall weight: 12,200 kg, empty load weight: 7,200 kg, total height: 2,600 mm, total length: 2,420 mm, total width: 2,250 mm, color: yellow, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, all wheel drive, cabin, front guard, head guard, lighting, pallet forks, sideshift, 🚜 COMBILIFT C5000XL | LPG | DUPLEX 4550 MM | FORK SIDESHIFT | FULL HEATED CAB | READY TO WORK ✅ FULLY SERVICED | WARRANTY | WORLDWIDE DELIVERY Looking for a reliable forklift that delivers value from day one without unexpected maintenance costs? We offer a fully inspected, serviced, and tested COMBILIFT C5000XL four-way forklift, ready for immediate use in manufacturing, warehousing, and logistics. Ideal for long, heavy loads and confined spaces. ⭐ KEY ADVANTAGES ✔ Full service and operational testing ✔ Start-up warranty ✔ Super Elastic tires in 100% condition ✔ Powerful 65 HP LPG engine ✔ DUPLEX 4550 mm mast ✔ Hydraulic fork sideshift ✔ Full heated cab ✔ Four-way multidirectional steering ✔ Excellent technical and cosmetic condition ✔ Ready to work without additional investment ✔ Live online demonstration available Djdpo Ag N Hlefx Ai Eskw ⚙️ TECHNICAL SPECIFICATIONS Manufacturer: COMBILIFT Model: C5000XL Year: 2016 (02/2016) Type: Four-way multidirectional forklift Capacity: 5000 kg Load centre: 600 mm Engine: LPG, G.M., 3.0 L, 65 HP Operating hours: 5244 h Mast: DUPLEX Lift height: 4550 mm Free lift: 2850 mm Fork sideshift: Hydraulic Cab: Full heated cab Service weight: 7200 kg 📏 DIMENSIONS Cab roof height: 2600 mm Collapsed mast height: 3150 mm Overall length: 2450 mm Overall width: 2250 mm Platform length: 1200 mm 🔧 FORKS Length: 1200 mm Width: 120 mm Thickness: 50 mm Hydraulic sideshift included 🛞 TIRES – 100% CONDITION Front: 23 x 10 - 12 Super Elastic Rear: 355 / 65 - 15 Super Elastic 🛠️ EQUIPMENT ✔ Hydraulic fork sideshift ✔ DUPLEX lifting mast ✔ Four-way steering ✔ 65 HP LPG engine ✔ Full heated operator cab ✔ Opening windows ✔ Working lights and LED lighting ✔ Warning beacon ✔ Air conditioning and cab heating ✔ Windshield wipers and ventilation fan ✔ Adjustable operator seat ✔ Third and fourth hydraulic valves ✔ CE certification and operator's manual 🏭 IDEAL FOR Timber processing, sawmills, steel mills, steel service centres, structural steel manufacturing, pipes, profiles, long materials, warehouses, logistics centres, and manufacturing plants. Suitable for outdoor operations and indoor use with adequate ventilation. Excellent maneuverability in confined spaces. 🏆 WHY FT LOGISTICS? We specialize in forklifts, sideloaders, four-way and multidirectional forklifts, and warehouse equipment. Every machine undergoes full inspection, servicing, and testing before delivery. 🚜 OVER 200 MACHINES AVAILABLE FROM STOCK! 🌍 Supplying customers throughout Europe and worldwide. Hundreds of European customers trust us and return for further purchases. 🤝 OUR SERVICES ✅ Full pre-delivery service and warranty ✅ Technical advice and after-sales support ✅ Leasing and financing ✅ European and worldwide transport ✅ Export assistance and customs documents 📸 Live demonstrations, photos, and videos available. Individual delivery quotations directly to your facility. 📞 FT LOGISTICS Sp. z o.o. FT LOGISTICS – WE DELIVER MACHINES THAT ARE READY TO WORK!

Year of construction: 2010, condition: ready for operation (used), - USED - CNC DOUBLE RAM VERTICAL LATHE MAX ROTATING DIAMETER: 3000 mm MAX TURNING HEIGHT: 800 mm MAX TURNING DIAMETER: 2800 mm SPINDLE: 1-160 rpm; 71-114 kW; 68500 Nm; 2500 mm X-AXIS TRAVEL: -150+1780 mm Z-AXIS TRAVEL: 900 mm RAPID FEEDS X-Z: 8 - 10 m/min TOOL MAGAZINE: BASKET-TYPE ; TYPE CAPTO C5; 24 POS. POS CONTROL UNIT: SIEMENS 840D MAX ADMITTED LOAD: 15000 Kg WEIGHT: 54000 Kg ACCESSORIES: SWARF CONVEYOR ; Dkjdpjyyrh Hefx Ai Esw TOOL SETTER ; AUTOMATIC DOOR ; HEAD COOLING SYSTEM ; TOUCH PROBE ; PORTABLE HANDWHEEL

Condition: reconditioned (used), functionality: fully functional, A debarker, model CAMBIO 35, is for sale. The CAMBIO 35 is equipped with a baby roll, which allows for debarking logs with a minimum length of 1.5 m. Spare parts are included in the sale. Djds Ahi Imepfx Ai Ejkw

Condition: ready for operation (used), Year of construction: 2013, For sale is a Baljer Zembrod OBX V-24 with up to 200m of rail. Dedpowxndnofx Ai Ejkw