Used Pots for sale (516)

Condition: as good as new (ex-display), Year of construction: 2016, We offer an immediately available Hydraulic spotting press with 40 tons pressure. Due to a change of warehouse location, this press is offered at a very competitive price. Pressure 40 t Table length 1000 mm table width 700 mm Machine weight approx. 9 t space requirement approx. 4000 x 4400 x 1800 mm stroke length 1050 mm installation height 1200 mm table rotatable 180 degrees table load max. 5 t forward speed 100 mm/sec return speed 100 mm/sec working speed adjustable from 0 to 10 mm/sec. Main cylinder 1 piece table extendable for 1050 mm table tiltable 50 degrees upper tool tiltable 180 degrees Traversing speed of the table 25 mm/sec Pressure, travel and speed adjustable via monitor- control adjustable robust machine body with solid welded construction, manufactured according to DIN 8651 low maintenance and reliable due to robust technology maintenance balcony with marine ladder entire range of motion secured by Sick light barriers Table moves out of the machine to the front and straightens up by 45 degrees on request. Control cabinet to the left of the machine Monitor control with 200 memory locations REMOTE function for remote maintenance Operating manual, technical documents, documentation in German language CE certificate monitor SIEMENS 9" Motors from WEG Hydraulics from Bosch Rexroth Interior lighting Itedpfshtm E Nsx Ahyeb Operator panel on swivel arm Two-hand operation on movable stand USB interface for data transfer Siemens control system Light sensors Sick 1250 mm ram plate can be folded down hydraulically, moves up to approx. 175 degrees Columns and cylinders are made of SAE 1045 tool steel (identical to German standard C 45) and are induction hardened and chrome plated on the outside. The linear measuring rod informs the control system of the position of the ram in each case. The travel distance, the upper stop point and the changeover point at which the press is to switch from idle to working speed, as well as the end position to be approached, can be entered easily and quickly via the monitor control. The working speed can be set in 1 mm/sec increments from 0 to 10 sec and in 10 mm increments from 10 to 155 mm. The control monitors the secured areas, all hydraulics and the pump. The control system is housed in a separate control cabinet. The actual press operation is carried out via a control panel mounted on a swivel arm, which reduces the distances involved.

Condition: used, Year of construction: 2015, machine/vehicle number: 4273, pressure:110 t table length:1200 mm table width:1000 mm stroke max.:1150 mm Itedpfxsd Ap Ugs Ahysb dimensions:4200 x 2400 x 4800 mm draw back pressure:11 t stroke max.:1150 mm weight:16 t stroke of the table:1200 mm swivable table::45 Grad table load:12 t table speed:25 mm/sec table speed:10 mm/sec power capacity:23 kW voltage:400 V control voltage:24 V DC frequency:50 Hz work speed:0 - 10 mm/sec. :130 mm/sec :195 mm/sec. Colour:Grau 7035 RAL Colour:Orange 2009 RAL Colour:Dunkelgrau 7021 RAL Oil tank capacity:400 l Recommended oil:DIN HLP / ISO VG 46

Condition: used, Year of construction: 1998, Performance and Design Pressing Capacity: 26–100 t (adjustable) Return Force: 45 t Table: 1,600 × 1,300 mm Max. Table Load: 5,000 kg Distance Ram – Table (max.): 950 mm Frame Type: 4-column Overall Dimensions (W×D×H): approx. 3,400 × 4,200 × 3,700 mm Total Weight: approx. 8,500 kg T-slots/Bores: DIN 650, 22 mm Hydraulics Pump: Rexroth SYDFE11x71RN0030CAM Motor Power: 7.5 kW Max. Operating Pressure: 200 bar Press Stroke Pressure Accuracy: ± 5 bar Tank Volume: 215 l Hydraulic Oil: HLP 36 Electrics Main Supply: 400 V AC Control Voltage: 24 V DC Frequency: 50 Hz Main Motor Connection: 7.5 kW Total Connected Load: approx. 10 kW Features 180° tiltable ram plate (up to 3 t) Ejector in table (3.5 t, 130 mm) Oil ports for core pull Digital measuring system Material feeding (injection molding) via ram plate possible Speed increase possible Documentation Hydraulic schematic Electrical schematic Technical drawing Data sheet (used spotting press, 100t press, Reis hydraulic press, 4-column press, toolmaking press, forming press, injection molding press, used machine, industrial machine, hydraulic press, tool testing press) Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they meet all aspects of the national Brazilian safety guideline NR 12, which builds on these standards. Our key strength is special-purpose machine construction and press automation. We offer tailor-made hydraulic presses, press brakes, and guillotine shears at surprisingly affordable prices. We use components from leading European manufacturers for the hydraulics of our presses. Iodoxd Tiqjpfx Ahyjtb

Condition: as good as new (ex-display), Year of construction: 2015, machine/vehicle number: 4293, pressure:40 t table length:1000 mm table width:700 mm daylight opening:1200 mm No. of Cylinders:1 St. stroke length max.:1200 mm Iedpfx Ahedxrqxeyotb table height over floor:700 mm table extendable:1200 mm Speed of table:25 mm/sec Table tilting:45 Grad table load:5 t Fold-down upper tool:170 Grad :1250 x 1000 mm :95 mm/sec speed of return flow:80 mm/sec working speed:0 - 10 / 10 - 155 mm/sec dimensions:4300 x 2700 x 4500 mm total weight:8,5 t Monitor Siemens:9 Zoll :1200 mm

Condition: good (used), Year of construction: 2020, operating hours: 70 h, For Sale: Spiro STW-2.0 – Year 2020 Iedpfx Ajx Hrwzehyotb We offer for sale a Spiro STW-2.0, manufactured in 2020. The machine is in good condition and has been used in professional industrial production. Key details: Manufacturer: Spiro Model: STW-2.0 Year of manufacture: 2020 Condition: Used, in working condition Application: Sheet metal ducting / HVAC production The machine has been regularly maintained and is ready for continued use. Inspection and testing can be arranged by appointment. It is also possible to purchase approximately 600 kg of copper wire for an additional price.

Year of construction: 2019, condition: refurbished (used), machine/vehicle number: DF0137, pressure:120 t Itjdpfxoffamto Ahyob table length:600 mm table width:600 mm stroke max.:400 mm dimensions:1070 x 2340 x 2800 mm weight:4,2 t pre-running speed:10 mm/sec :26 mm/sec :200 l Oil cooling (electric):1,5 kW (max) table height:875 mm Working height from to:500 mm diameter of piston:230 mm total power requirement:15 kW pump capacity:24 Lt./sec Pressure power:300 bar :76 mm :650 mm capacity of ejector in table:20 t :150 mm Recommended oil:46er

Condition: excellent (used), Spot welding machine with single-acting cylinder and flange-mounted electrode holders above and below Make: DALEX Type: PMS 14-3 Throat depth: 350 mm Rated power at 50% duty cycle: 80 kVA Secondary short-circuit current: 54.5 kA Secondary open circuit voltage: 7-14 V Electrode force: 80-1,200 daN Equipped with: 8-step switch Main switch Attached control cabinet HARMS+WENDE Synchronous welding control MPS 200 8 welding programs with AEG nameplate Itjdetuwz Iopfx Ahyjb Start via foot pedal

Year of construction: 1999, condition: excellent (used), Year of construction approx. 1980 Power at 50% ED 35 kVA Projection 250 - 450 mm Working stroke 40 mm Itedsium Niepfx Ahysb Electrode force 100 - 460 kp infinitely adjustable Electrode force at 6 bar 460 daN Operating air pressure 2 to 6 bar Electrode arm Ø 60 mm Electrode holder Ø 30 mm Insertion electrodes cone MK 2 Ø 17.78 mm Arm distance 200 / 400 mm Adjustability of the electrode holder 200 mm Connected load 83 KVA Mains connection 380 volts, 50 Hz - 4-time control - stepless power adjustment - Single points and series points - parallel electrode guidance - Water-cooled (without cooling unit) - electric foot switch Weight 300kg

Condition: excellent (used), functionality: fully functional, nominal power at 50% duty cycle: 14 kVA, input voltage: 380 V, type of cooling: water, overall weight: 300 kg, welding power (max.): 40 kVA, arm spacing: 450 mm, total width: 450 mm, total height: 1,450 mm, total length: 1,100 mm, stroke length: 110 mm, input frequency: 50 Hz, Spot welding machine Soudometal SP14P maximum welding current at 50 ED: 14 ​​kVA max. welding power 42 kVA Electrode force: 30-200 DAN Electrode stroke = 30-110 mm Projection: 450 mm Mains connection 380V / 42A secondary current continuous current 1.85 kA; kA short-circuit current 12.5 kV; Electrode force: 30-200 DAN foot control Cooling water volume: 3 l/min Electrode arm Ø: 45 mm Electrode holder Ø: 25 mm Machine weight: 300 kb kg Dimensions: 1250x1100x450 mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Itsdpjwkr Insfx Ahyjb Your ad has been automatically translated. Translation errors are possible.

Condition: used, DALEX Spot Welding Machine Type SF 204 Machine No. AZA/N-32865 Year of Manufacture 2010 Power at 50% duty cycle: 30 kVA Continuous power: 21.2 kVA Maximum short-circuit power: 108 kVA Maximum welding power: 86.4 kVA Throat 500 mm Arm distance 350 - 500 mm Electrode force: 65 - 360 kp (short throat) Electrode force: 25 - 140 kp (long throat) Electrode arm Ø 45 mm Electrode holder Ø 25 mm Electrode stroke 20 mm Welding capacity: Itsdpfx Ajit Rq Hshyob Steel sheet 5 + 5 mm / max. 6 + 6 mm Brass sheet 2 + 2 mm / max. 3 + 3 mm Aluminum sheet 1 + 1 mm / max. 1.2 + 1.2 mm mm CrNi 1 + 1 mm Round steel 12 + 12 mm / 16 + 16 mm Open circuit voltage 5.2 volts Connected load 55.2 kVA Mains connection 400 volts, 50 Hz - Multifunctional welding control system with Dalex RS 15 microprocessor - Lower electrode arm with swivel fitting for height adjustment and lateral swiveling - Foot pedal operation - Water-cooled (cooling water requirement 4 liters/min.) Space requirement L x W x H 1250 x 415 x 1200 mm (height = 1310 mm with base) Weight 196 kg Very good condition

Condition: refurbished (used), Year of construction: 2025, Power at 50%: 80kVA Itedpfx Ajx Dmu Tshyjb Short circuit-current: 35kA Electrode force: 100-600daN / single stroke Throat depth: 350-650mm --- Weld control: MPS 10 (5-times, 8-program) --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: used, Dalex Works Pms 10-2 380V 50Hz rated power at 50 duty cycle: 63 kVA Iedpfjg Rcpxsx Ahyetb secondary short circuit current: 45 kA rated primary voltage 380 V - 50 Hz open circuit voltage of 5,6 V electrode force: 65-390 daN Machine weight 341 kg

Year of construction: 2013, condition: ready for operation (used), A resistance spot welding machine Pei is available. Rated power at 50%: 35kVA, secondary short-circuit current: 19kA, max. welding current: 15.2kA, secondary continuous current: 4.8kA, secondary voltage: 5.3V, electrode force: 180daN, arm spacing range: 140mm-350mm, arm reach: 430mm, arm diameter: 50mm, electrode stroke: 60mm, weight: approx. 280kg. Documentation vorhanden. An on-site inspection is possible. Itjdpfx Aex A Hhkshysb

Condition: used, current capacity 8,0 kVA throat 80 - 480 mm contact pressure capacity 17 - 235 daN Itsdpfx Aextqv Tehyeb horn spacing 140 mm mm rated capacity 8,0 kVA voltage 380 V total power requirement 17,8 kVA weight of the machine ca. 77,5 kg dimensions of the machine ca. 0,35 x 0,80 x 1,05 m - Serial-No.: 18310126 - 2

Condition: good (used), nominal power at 50% duty cycle: 100 kVA, – Power 100 kVA – Pneumatic – Throat depth 900 mm – Bosch PSP 2000 control – 380 V Iedpfx Ahoxc Nx Eoyotb

Condition: good (used), nominal power at 50% duty cycle: 8 kVA, - Capacity 8 kVA Itedpfx Aevbr Dljhyob - Timer - 380V

Condition: used, Year of construction: 2012, manufacture NIMAK electric cabinet Rexroth - Bosch Group dimension div. verfügbar Itsdexrg Ebjpfx Ahysb In our opinion, the machine is in good used condition Condition and can be viewed by appointment. Welding tons Technical features: - including control unit There are around 150 different welding tons available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: good (used), Power: 16 KVA Itedpfehc Syzjx Ahyob

Condition: good (used), Power: 50 kVA Arm design: 520 mm Ijdpspy Dydsfx Ahyjtb

Condition: not inspected (used), throat depth: 500 mm, Manufacturer: Fase Full: 116 kVA Version: 500mm The machine used to be part of a system, its settings and performance were controlled via a central control unit, which is currently missing, This version is required to operate the machine! Ijdpeuhn Uhjfx Ahystb

Condition: good (used), Power: 15 KVA Execution: 530 mm Iedpfx Ahem Twiceyotb

Year of construction: 2017, condition: new, The device is new, only tried on!!! Year of manufacture: 2017! Manufacturer: Simsek Full: 16 KVA Itodpfxjixtmwo Ahyeb Execution: 550 mm Welding head with cooling!

Condition: good (used), Arm design: 270 mm Itjdpfx Aopy Dy Eehyjb Power: 125 kVA

Condition: not inspected (used), Year of construction: 1995, functionality: unexamined, throat depth: 500 mm, Manufacturer: Fase Full: 116 kVA Version: 500mm Isdpfx Aheuhn Tkoystb The machine used to be part of a system, its settings and performance were controlled via a central control unit, which is currently missing, This version is required to operate the machine!

Condition: repair required (used), Full: 63 KVA Arm design: 400 mm The machine is currently not working (control panel missing) Itjdpfx Ahepy Dx Isyjb