Used Powder Press for sale (13,121)

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Quantity of oil in l: 1100 Ibodpfx Aohtaaqep Djc Stroke in mm: 300 Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12000 Operating pressure in bar: 6 Approach speed in mm/sec: 375 Working speed in mm/sec.: 18 - 40

Condition: good (used), Year of construction: 2007, frame press GOMA PHA 3500 Door Press hydraulic Location Gorzów Wlkp. Conditions of delivery OWN RECEIVING Cost of delivery to be negotiated Isdpfx Aodntc Njp Debc Startup type to be negotiated Description Comments Working space 3500 x 2300 mm 1000kG (daN) pressure, engine at hydraulic unit 2,2 kW lenght 3500 mm hight 2300 mm weight 2000 kg agrageate hydraulic

Condition: new, Year of construction: 2026, Actually one showroom machine available. Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how Ibsdjxfwdjpfx Ap Dec + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: like new (used), Year of construction: 2009, functionality: fully functional, Table size 2600*1800mm maximum daylight 2200 mm clamping force 300T table size 2600*1800mm Ibodjrl Irkspfx Ap Dsc max day light 2200mm clamping force 300T

Condition: like new (used), Year of construction: 2004, HYDRAULIC PRESS FOR GLUING WOODEN ELEMENTS TO THE THICKNESS OF HSKG Category: VI - Hydraulic presses for gluing wooden parts. The HSKG device is used for gluing wooden cut-thickness parts under high pressure of hydraulic cylinders. The range of achievable crushing forces per cylinder is 5-11kN (horizontal) and 25-55kN (vertical). The gluing of elements is carried out in a stack with the dimensions of the loading field. Stack forming is carried out by hydraulic compression between the sliding vertical beams and the vertical slats of the transverse cylinders. Both stack forming elements are equipped with wooden or metal inserts corresponding to the profile of the slat stack. Gluing wooden elements from the thickness improves the quality of the frames, reduces the cost of machining, reduces the amount of wood waste. Technical and operational data ( of standard execution HSKG - 6m ) Number of loading fields pcs 4 Dimensions of a single loading field - loading height - length of slats in one field mm mm 1140 1530 Maximum width of slats mm 150 Maximum length of glued elements mm 3120 Installed power kW 3 Electricity supply V AC 3/N/PE, 400V 50Hz Control voltage V DC 24 Number of actuators on one field: mm mm O 50x100 - 3 pcs. O 80x100 - 3 pcs. Ibedpfstrl R Aex Ap Dec External dimensions (L x W x H) mm 8120x1000x2300 Weight of the device kg 4800 At the request of the customer, we also make other configurations of pressure actuators control depending on the expected length of glued elements, as well as other lengths of individual working fields in different quantities in the whole press set, and working width of up to 220 mm maximum with increased pressure force.

Condition: excellent (used), Schroeder & Bauer WB 32-1 Universal Wire and Strip Bending Machine Wire feeder Clear text display Press force monitoring Wire straightening device Bosch stripping devices Ibsdpsh I Nrqsfx Ap Dsc Mounting and brush motor with integrated tool W32/1-32 Soundproof cabin Barrel for CU wire with stamped parts Control cabinet Technical data: Drive power: 7.5 kW Speed (min. - max.): 40 - 250 rpm Press force / stamping unit: 200 kN Longitudinal feed: 250 mm Strip width (longitudinal): 50 mm Wire diameter: 6.0 mm Machine weight: 3500 kg Dimensions without electrical components (L x W x H): 3600 x 1500 x 2400 mm More items – new and used – can be found in our shop! International shipping costs available upon request!

Year of construction: 1966, condition: good (used), Used, well-maintained eccentric press, Weingarten, with pneumatic retraction, piece counter, documentation, press test book, spare parts (2 pallets). Pressing force: 1500 kN (150 tons) Stroke: 60 mm Ram, small/large stroke: 10 – 140 mm Overhang: 550 mm Cylindrical mounting: 30 mm Table width x depth: 1200 x 1000 mm Dimensions width x depth x height: 150 x 270 x 290 cm Weight: 13,500 kg Technical data and dimensions: Subject to change without notice. Iedpfoir I Slox Ap Debc

Year of construction: 2022, condition: new, Press hydraulic 6 six meters automat for fingerjointing line lignum Press hydraulic 6 six meters automat for fingerjointing line lignum Second hand 2022 Make: Press hydraulic 6 six meters automat for fingerjointing line lignum Model: Iodoimwx Eepfx Ap Dsbc Press hydraulic 6 six meters automat for fingerjointing line lignum Description: press hydraulic 6 six meters automat for fingerjointing line lignum .iNPUT TRANSPORT band output automat proces .More infomation plese send for mail Year: 2022

Condition: used, pressure 75 t stroke 250 mm Ibjdpfsupxr Ujx Ap Doc daylight longitudinal/sideways 800 x 215 mm dayligth 170 - 885 mm working pressure 7,5 - 8.5 bar weight of the machine ca. 0,45 t dimensions 1,2 x 0,8 x 2,1 mm Hydraulic/pneumatic workshop press Cylinder can be moved sideways pneumatic foot pedal Winch for table height adjustment 2 pcs. pressing blocks CE marking

Condition: used, pressure 2 t throat 150 mm stroke 150 mm table surface area 310 x 250 mm power requirement 2,0 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,2 x 0,8 x 1,7 m Single column press - with table base - various press accessories Ibsdotzv Hmopfx Ap Dsc

Condition: new, Promess servo press KA-EMF80 80 kN, new, with DMS amplifier Manufacturer: Promess Type: KA-EMF80 Type: Servo press kN: 80 Condition: New Calibrated: Yes Ibsdpfx Apsrgn Nnj Dec DMS amplifier: BA 624.u2 More servo presses, new and used, can be found in our shop! International shipping costs available upon request!

Year of construction: 1994, condition: good (used), machine/vehicle number: 24.105, A used, well-maintained hydraulic press brake HATASTAR, equipped with: - CYBELEC DNC 70 control system - Controlled axes Y1, Y2, X, R - Hydraulic upper tool clamping - Hydraulic crowning - FIESSLER AKAS safety system Iodofthzkepfx Ap Djbc - Tools - Press brake manual - Documentation Bending length 4600 mm Frame width 4100 mm Pressing force 1350 kN Stroke 220 mm Rapid traverse 140 mm/sec Working speed 10 mm/sec Return speed 100 mm/sec Further technical data can be found in the PDF document. Technical data and dimensions: Subject to change.

Year of construction: 2019, condition: new, We offer bending tools and punching tools for TRUMPF, AMADA, BYSTRONIC, LVD, SALVAGNINI, DURMA, ERMAKSAN, MVD, and HACO machines. Standard and custom tools. Please send us your requirements, and we will provide you with the appropriate tool. Iedod H T Tfspfx Ap Dsbc

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 697/2, Equipment: 4th hydraulic function, Hounsell Engineering 50 Tonne 4-Column Hydraulic Press – 1997 We are pleased to offer this Hounsell Engineering Ltd (UK) 50-tonne 4-column hydraulic press, manufactured in 1997. A substantial, British-built industrial hydraulic press with heavy-duty construction, previously used in a production environment and now available for sale due to surplus requirements. Suitable for a wide range of pressing, forming, assembly, fabrication, maintenance and general engineering applications. Machine specification: Manufacturer: Hounsell Engineering Ltd, UK Type: 4-Column Hydraulic Press Iedpfxoz Ib R Ie Ap Dobc Rated capacity: 50 tonnes Year of manufacture: 1997 Machine / Serial No.: 697/2 Stroke: 200 mm System pressure: 250 bar Pump motor: 5.5 kW Electrical supply: 415 V Control voltage: 110 V Hydraulic fluid: Texaco HD 32 Construction: Heavy-duty industrial steel Condition: Very good used condition The press was in service prior to removal and is being offered for sale as surplus equipment. With a rated capacity of 50 tonnes, the machine is capable of generating approximately 500 kN of compressive force, making it suitable for a broad range of industrial and workshop applications. Condition & Inspection The machine is offered in good used condition. Prospective purchasers are welcome and encouraged to inspect the press before purchase to satisfy themselves as to its condition, specification and suitability for their intended application. Sold as seen. No warranty is given or implied. Collection & Loading Location: Kent, England, UK Collection only due to the size and weight of the machine. Loading assistance may be available by prior arrangement. Further photographs and information can be provided, including serial plate details, overall dimensions, weight and loading arrangements. A good opportunity to acquire a substantial 50-tonne industrial hydraulic press at considerably below the cost of a comparable new machine. Please contact via the links within for further details, photographs, or to arrange an inspection. Many Thanks, Search terms: Hounsell Hydraulic Press, 50 Tonne Press, 4 Column Press, Hydraulic Workshop Press, Industrial Press, Engineering Machinery, Pressing Machine, Forming Press, Manufacturing Equipment, Fabrication Machinery.

Condition: excellent (used), Year of construction: 2018, Veneer press, OMC Type PL 105 30/13 Year of manufacture: 2018 Dimensions: 3000 x 1300 Ibsdpfxozx Sh Uo Ap Doc Piston diameter: 6 x 85 3.2 kg/cm2 Weight: approx. 3300 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Gannomat Concept 70 Eco Body Press Year of manufacture: 2026 including the following options: - Rapid traverse speed, adjustable up to 50 mm/sec - Machine feet (working height 500mm) The Concept Eco and Concept Primus are ideal assembly aids for dowel joints in body pressing, as well as for drawer production. Brief description: • Proven tolerance compensation system (GANNOMAT system) • 2 potentiometers for steplessly adjustable pressing force • Minimum pressing force 300/500 daN (kg) for Concept Eco, or Minimum pressing force 600/800 daN (kg) for Concept Primus • Maximum pressing force 2200 daN (kg) for Concept Eco, or Maximum pressing force 3500 daN (kg) for Concept Primus • 3 pressing and traversing speeds Isdpovxgrrefx Ap Djbc 5 / 10 / 25 mm/sec (with fine positioning / creep speed) • Freely adjustable pressing time preselection with automatic opening function • Concept Eco: Simplest operation via 6 separate push buttons for 8 movement sequences • Concept Primus: Simplest operation via LCD display Universal application range: • Bodies, e.g. for furniture and cabinets • Mitered bodies • Bodies with an overhanging lid • Drawers • Pressing of multiple bodies / drawers Advantages: • Proven tolerance compensation system (GANNOMAT system) • Electromechanical body press with frequency-controlled geared motors • Independent vertical and horizontal pressing bars • High service life due to proven and high-quality components • Construction in a solid and robust design • Space-saving design • Body pressing = Simple + Fast + Efficient + Flexible + Precise + Professional • Simple operation via a simple and practical control panel • Fast pressing due to pressing bar positioning speed of up to 50 mm/sec (option) • Efficient due to precise pressing of various body sizes • Flexible due to adjustable parameters such as pressing force, pressing time, traversing speeds • Precise due to angle-accurate pressing of furniture bodies and drawers • Professional production of bodies and drawers with a modern body press

Condition: new, stroke: max. 500daylight: max. 1000motor: 15performance of pump: 65oil filling: 120messurements (LxWxH): 1300 x 3300 x 2950weight approx.: 6000pressure: 300Speed: vorlauf 8 / rücklauf 13,5Electro-hydraulic workshop press 300 t- Anti-rotation device for the cylinder piston - Pressure regulating valve - Speed control throttle valve - Emergency stop safety device Ibodpfxjz Hgb As Ap Dsc - Noise level: 75 dB - Soft starter - Two-hand control panel - Linear measuring device for stroke adjustment with digital display - Pressure gauge - Digital pressure display - Emergency stop buttons on the control cabinet and on the two-hand control panel - Hydraulic tank including motor mounted at the lower side next to the frame - Hydraulic lines with check valves - Table manually height-adjustable and secured with 3 locking pins

Condition: good (used), Year of construction: 1991, Used squaring shear from Haco Type TS 3012 Capacity: 3050 x 12 mm Adjustable back gauge Ibsdezhbglopfx Ap Doc Blades recently sharpened

Condition: good (used), Year of construction: 1996, Well-maintained, used press brake from Beyeler / Bystronic. Type PR6 150 4100 Capacity: 4100 x 150 tons Cybelec DNC 880S Y1, Y2, X, R, Z1, and Z2 axes CNC controlled Iedpfxszbhh Rj Ap Dobc Includes a set of tools.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Well-maintained, used E Brake by Safan Type E Brake 100 3100 Capacity 3100 x 100 tons Y1, Y2, X, R, Z1, and Z2 CNC controlled Manual crowning Iodpfx Ajzbhk Esp Dobc Hydraulic Wila NS top clamp

Condition: good (used), Parker 82C 061 hose crimping machine for hoses from 1/4" to 1 1/4" (depending on the crimping dies) with 5 sets of crimping dies (colors see images). Included is an Enerpac PUJ1200E hydraulic power unit, as well as a TONE SM 210-SL hose cutter, manufactured in 03/2016. The table is also included. The equipment has been checked for proper functioning and has undergone electrical inspections, which were carried out by an electrical company. Ibodpfoz N Slmox Ap Djc

Condition: excellent (used), Year of construction: 1966, Exner 200 Pressure: 200 t Stroke: 180 mm Table length: 690 mm Table width: 530 mm Distance between columns: 420 mm Hydraulic four-column press for embossing, upsetting, flow forming, calibrating, and punching Type H4SP 200 S 1101-3 Year of manufacture: 1966 _____ Downward pressure capacity: approx. 200 tons Upward retraction force: approx. 20 tons Usable table size: 420 x 220 mm Total table size: 700 x 530 mm Iedez N Tf Ujpfx Ap Debc Distance between columns at the front: 420 mm Laterally: 220 mm Installation height, table to ram (top): 380 mm Ram stroke: approx. 200 mm Piston / column diameter: 270/120 mm Piston bore: 50 mm Closing speed of the ram: - Rapid traverse / working stroke / ram at 330/10/180 mm/s Total power consumption: approx. 15 kW - 380 V - 50 Hz Weight: approx. 3,000 kg Machine dimensions: approx. 1.4 x 1.3 x approx. 2.75 m Accessories / special equipment: Sick light curtain

Year of construction: 2026, condition: new, functionality: fully functional, COLUMBUS PIONEER – Modular Vacuum & Membrane Press with Lifetime Guarantee The COLUMBUS Pioneer is the professional solution for joineries and woodworking shops looking to produce flexibly and invest securely for the long term. Ideal for: * Veneering * Form gluing * Laminating * Thermoforming * Solid surface materials * Curved workpieces Your benefits: * Modular system – can be expanded at any time * Lifetime guarantee on the machine frame * Robust industrial construction * Columbus 360° included: Master Manual + AI support * Premium components from BECKER, FESTO, and SIEMENS * Simple operation and high reliability Features: * Quick-change membrane system * Natural rubber membrane rated up to +130 °C * Adjustable vacuum pressure from 400–900 mbar * Connection for external vacuum bag * Sturdy phenolic resin work surface * Smooth-running swivel casters Available sizes: Ibsdpfxjz Izrfs Ap Dec * L: 3,050 x 1,350 mm * XL: 4,050 x 1,350 mm * XXL: 4,050 x 1,700 mm COLUMBUS has been developing vacuum technology for professional users for 50 years. Viewing and consultation available by appointment.

Year of construction: 2026, condition: new, COLUMBUS PIONEER – The Modular Professional Vacuum Press for Flexible Joineries More possibilities. More applications. More future security. The COLUMBUS Pioneer is not just a vacuum press, but a well-designed complete system for modern joineries and woodworking businesses. Ideal for: * Veneering * Form bending * Laminating * Thermoforming * Solid surface materials * Curved and complex workpieces Why choose COLUMBUS? Many businesses discover completely new uses and additional orders within a short time because the Pioneer makes jobs economical that were previously turned down. Your advantages: * Modular system – grows with your business * Lifetime warranty on the machine structure * Heavy-duty industrial construction for decades of use * Columbus 360° included: Practical expertise, master manual, and AI support for maximum application safety * Premium components from BECKER, FESTO and SIEMENS * Simple operation and reproducible results Ibsdsz Iz Dbspfx Ap Djc Equipment: * Quick-change membrane system * Highly elastic natural rubber membrane up to +130°C * Pressure regulation from 400–900 mbar * Connection for external vacuum bag * Sturdy phenolic resin worktop * Smooth-running swivel castors Available sizes: * L: 3,050 x 1,350 mm * XL: 4,050 x 1,350 mm * XXL: 4,050 x 1,700 mm COLUMBUS has been developing vacuum technology for professional users for almost 50 years. Viewing and personal consultation available by appointment.

Condition: ready for operation (used), Year of construction: 1984, stroke length: 60 mm, controller manufacturer: SIEMENS, Mechanical stamping press manufactured in 1984. This KAISER V50W High-Speed Press underwent a complete mechanical and electrical overhaul in 2022, featuring a new Siemens control system and a SEW 59 kW main motor. It offers a pressing force of 500 kN and a stamping speed of up to 400 strokes/min. If you are looking to get high-quality stamping capabilities, consider the KAISER V50W High-Speed Press we have for sale. Contact us for further details. • Retrofit/overhaul: Complete mechanical and electrical overhaul in 2022 (approx. €50,000) • Stroke: 8–60 mm • Ram adjustment: 80 mm • Stamping speed: up to 400 strokes/min • Table size: 800 × 550 mm • Main motor: SEW 59 kW (installed 2022) • Control system: Siemens (new electrical system and cabinet in 2022) • Operator panel: Siemens SIMATIC HMI Ibodpfx Apez E Ikio Dsc • Press force monitoring: UNIDOR • Condition: Very good, ready for operation Technical Specification Stamping Force 500 Kn