Used Power Generators for sale (45,421)

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Hydraulic power unit: with hydraulic reservoir, mobile -Hydraulic pump: Pressure up to 140 bar -Flow rate: 12 l/min -Motor: Electric 2.2 kW / 1380 rpm -Pressure accumulator: 6.3 liters Gjdjyiz Nwspfx Abrstu -Hydraulic tank/filter/valves: see pictures -Dimensions: 770/380/H810 mm -Weight: 110 kg

Year of construction: 2015, condition: excellent (used), Type: DUAL-PACK 12 Serial number: 152656 P12 Year of construction: 2015 Capacity: 500 kg/24h Refrigerant: R404a Compressor: Copeland Emerson ZB15KCE-PFJ-551 Gtedsqvnpaspfx Abrsu Generator: Geneglace F15 Power: 230VAC, 1Ph, 50Hz Dimensions: 800 x 700 x 700 mm

Condition: used, Vacuum pump WERIE RIETSCHLE Type CLFG 11 DV Serial no.: 669299 Year of manufacture: 1981 Volume flow rate: 10 m3/h Vacuum: 0.95 bar Tank capacity: 40 litres Motor power: 0.37 kW Motor speed: 1,450 rpm Power supply: 380 V, 50 Hz Dimensions (L x W x H): 850 x 650 x 350 mm Weight: 60 kg Gsdpfx Aboykaunorstu

Condition: used, Year of construction: 1976, cone distance min./max. 0/108 mm Pitch angle min/max 5°/84° Pitch diameter (1:1 ratio) 152 mm pitch diameter (10:1 ratio) 216 mm Diametral pitch (finest/coarsest) 1.3/8.5 Mod. Face width gear wheel max. 35 mm speeds: 98-286 weight of the machine ca. 6577 kg dimensions of the machine ca. 1560 x 2140 x 2200 mm Equipment/accessories: Gjdpjyh Rmtsfx Abretu -Cutting tools -Spacer angle -Technical documentation

Condition: used, cone distance min./max. 0-108 mm Pitch angle min/max 5°/84° Control GE Fanuc Series 0-GC Pitch diameter (1:1 ratio) 152 mm pitch diameter (10:1 ratio) 216 mm Diametral pitch (finest/coarsest) 1.3/8.5 Mod. Face width gear wheel max. 35 mm Knife spindle - Speed range 41-121 U/min working spindle speed range 0-33.33 U/min weight 9025 kg dimensions of the machine ca. 2707 x 2720 x 2200 mmxmmxmm Equipment/accessories: -Knife Gedpfeyh Rmmex Abretu -Chip conveyor -Technical documentation

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 174146, fuel type: gas, color: blue, power: 10,000 kW (13,596.20 HP), nominal power: 10,000 kW (13,596.20 HP), nominal power (apparent): 12,163 kVA, 10MW Wärtsilä AMG Gas Power Plant with Heat Recovery Primary Power Generation: Wärtsilä W20V34SG Gas Engine - Output: 10,000 kW (10 MW) - Configuration: 20‑cylinder, spark‑ignited gas engine - Fuel: Natural gas - Year: 2013 Electrical Generation: AMG 1120LT08 DSE Generator - Rating: 12,163 kVA - Year: 2013 Heat Recovery System: Cochran Waste Heat Boiler - Thermal Output: 17,500 kW - Year: 2013 Cochran Economiser – Waste Heat Recovery Unit Gtjdpfx Ajygx Tzobreu - Thermal Output: 2,719 kW - Year: 2013

Condition: used, Year of construction: 1985, Technical details: rated capacity: 1410 kVA drive motor: 1270 kW Number of working hours: 980 h revolution per minute: 1500 U/min type of fuel: Diesel weight of the machine ca.: ca. 9,0 t CHP - (Combined Heating and Power Plant) (Diesel) with air output filter Standby Aggregate: - 1410 kVA - fuel consumption approx. 220g/kWh - parallel operation possible such as public net + 2. Generator Generator: - make A.van Kaick; type DKBN 100/1400-4TS - 1410kVA by 1500U/min Motor: - make MTU Friedrichshafen; type 16V 396 TC 33 - 1270 kW by 1500 rpm Gjdpfx Abeu Nu U Heretu - cooling via water, start with battery equipment: - heat exchanger with ventilator - fuel tank - Siemens circuit breaker - not many documentation available - no electric cabinet *

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: HAW07.5-2-22-T96, overall weight: 100 kg, total length: 600 mm, total width: 400 mm, total height: 900 mm, input voltage: 400 V, type of input current: AC, input frequency: 50 Hz, power: 7.5 kW (10.20 HP), operating pressure: 250 bar, Equipment: hydraulics, Hydraulic power packs from 1.1 to 22 KW output ⦁ Drive type electric motor - petrol engine - diesel engine or PTO driven ⦁ Hydraulic oil tank 36L - 96L - 144L - 250L or according to customer requirements ⦁ Hydraulic pump Gear pumps or axial piston pumps ⦁ Additional components such as valves and control technology ⦁ Tank size 36L - 96L - 144L - 250L or according to customer requirements (customer drawing) Gtodpfx Ajt U Uiaobrsu

Condition: excellent (used), CATALOG NUMBER 7895 Gtedpfxeykavrs Abrju TECHNICAL DATA - Motor: 7.5 kW - Voltage: 400 V - Number of waste containers: 2 pcs - Extraction capacity: approx. 8900 m3/h - Rotational speed: 3000 rpm - Negative pressure: 2800 Pa - Extraction speed: 28 m/s - Filter area: 20 m2 - Number of filters: 45 pcs - Filter category: G - Filter material: polyester - Extraction duct diameter: 300 mm - Overall dimensions (L/W/H): 2370x1170x2300 mm - Weight: 470 kg ADVANTAGES – Mobile sawdust containers – Unpainted – Used extraction system – Very good condition Net price: 13,900 PLN Net price: 3,300 EUR based on 4.2 EUR exchange rate (Prices may vary subject to significant fluctuations)

Condition: used, New precision lathe chuck, precision chuck 3-jaw high precision power chuck High Precision Air Chuck KITAGAWA KPC63C100 EP 3-jaw pneumatic precision chuck with integrated cylinder Chuck No. L1208 - P - EP Year of manufacture: 2011 External diameter: 150 mm External clamping range: approx. 3-135 mm Internal clamping range: approx. 6-149 mm Jaw stroke: Ø 2.5 mm Max. clamping force: 11.6 kN Gjdpjyif I Iofx Abrstu Repeatability: 0.0010 mm Jaw mounting bolts: M5 x 16 mm, 4 units per jaw Chuck mounting bolts: 6 units, M6 x 65 mm Max. speed: 4000 rpm - Unused, packed in original box - Box only opened for photos Weight (chuck): 6.3 kg Weight with box: 8.5 kg New, unused, as-new from stock Suitable for DMG WASINO G series and many Japanese lathes

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, spindle speed (max.): 7,000 rpm, type of input current: three-phase, grinding wheel diameter: 200 mm, overall weight: 4,650 kg, grinding length: 350 mm, center height: 190 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, travel distance X-axis: 490 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 660 mm, grinding spindle motor power: 24,000 W, workpiece diameter (max.): 320 mm, input voltage: 400 V, nominal power (apparent): 35 kVA, spindle nose: ISO 50, swivel angle A-axis (min.): 360 °, CNC tool grinding machine WALTER Helitronic Power Production TECHNICAL CHARACTERISTICS: CNC control: HMC 500 Software installed: Tool Studio 2.1 R4 Number of axes: 5 Height of centers: 190 [mm] Stroke X: axis 490 [mm] Resolution X axis: 0.00001 [mm] Stroke Y axis: 320 [mm] Resolution Y axis : 0.00001 [mm] Stroke Z axis: 660 [mm] Resolution Z axis: 0.00001 [mm] Traversing feeds X, Y and Z axes: 15000 [mm/min] A axis: 360 [°] C axis: +/- 200 [°] Resolution C axis: 0.0001 [°] Max. workpiece lenght: end face grinding: 320 [mm] Max. grinding length: 350 [mm] Max. grinding diameter: 320 [mm] Grinding spindle attachment: NCT Grinding spindle diameter: 80 [mm] Grinding wheel max. speed: 7000 [rpm] Grinding spindle motor power: 24 [kW] Max. diameter grinding wheel: 200 [mm] Internal workpiece spindle nose: ISO 50 Workpiece spindle max. speed: 60 [rpm] Total power required: 35 [kVA] Weight: 4650 [Kg] EQUIPMENT INCLUDED: x1 TRANSOR 12290-800A filtration unit x1 MTA oil chiller model TAE 015 x1 DSL oil mist extractor model AES-GAMMA 30 x1 RENISHAW part probe x1 disc-type tool loader 40 positions x1 SCHUNK gripper x2 grinding wheel arbor adapters x1 fire protection system - to be inspected by the buyer through a certified organization x1 electrical schematic manual x1 Service Instructions manual LICENSED WALTER WINDOW MODE (WWM) PACKAGES: - Package 001 (cylindrical mills) - Package 002 (tapered mills) - Package 003 (drills) - Package 004 (step drills) - Package 006 (woodwork tools) - Package 013 (reamers) - Package 015 (insert seats) - Package 016 (warmup program) - Package 027 (flexible program) - Package 090 (loader package) - Package 091 (acm) - Package 098 (loader package) - Package 099 (loader package) - Package 100 (reference data m.) - HELICONE (flute calc. conical.) - HELIDRILL (flute calc. drills) - HELIFLUTE (flute calc. cyl. mill.) - MCS (machine control .) - SCHEIBE (wheels menu) - TS_ADVANCED (toolstudio (v1.0-v.) - TS_STANDARD (toolstudio (v1.0-v.) - TS_STEPTOOLS (toolstudio (v1.0-v.) LICENSED TOOLSTUDIO OPTIONS: - Tool Studio 2.0 server/machinecontrol - Tool Studio 2.0 standard license - Tool Studio 2.0 advanced license - Tool Studio 1.9 upgrade options - Tool Studio 2.0 upgrade options - Option steptools - Option profile light (contour roughing ...) - Option calibration w/ touch probe - Option drills Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. Gsdpfxsyh Nf Ie Abrotu The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed.

Condition: good (used), Wanson steam generator from meat factory which closed in 2016. 698 Kw. Further details are on the plates shown in the photographs. Gjdpfoi Uli Ejx Abrstu

Condition: excellent (used), Pneumatic power clamp Make DESTACO type 82L 3G-251C8HO used from machine dismantling length 200 mm Gtedpfsq Evraex Abrou width 35 mm height 75 mm 2 x available

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, CNC Tool Grinding Machine Walter Helitronic Power FH, Year of manufacture: 2015 Fanuc control system with cylindrical pallet loader, pallets from 4 mm to 25 mm 8-position disc changer, electrostatic mist collector fire extinguishing system, Software: Walter Window Mode and Toolstudio, Gtsdpsyh Dl Nofx Abrju Software packages: 001, 002, 003, 016, 017, 026, 090, 091, 098, 099, 032, Helicone, Helidrill, Heliflute, NC-Mode, Power-IMS, Toolstudio_Standard, with preparation for hydraulic unit (steady rest), The grinding spindle (single spindle) is directly driven and equipped with an oil cooler. The hollow shaft motor for the A-axis operates at a speed of 0-750 rpm. The C, X, Z, and A axes were overhauled in 2022.

Condition: good (used), Year of construction: 1998, operating hours: 1,329 h, fuel type: diesel, motor manufacturer: Yanmar, Field of application: Construction Drive: Wheel Empty weight: 3.380 kg Number of owners: 1 Technical condition: good Visual appearance: good Drill equipment: Tank, Control Panel, Steel canopy Production country: NL Please contact Michael Overmeer for more information Gjdpfx Aboygwfiorstu Atlas-Copco with 1.329 operating hours mounted on a trailer year of construction december 1998 with a hydraulically operated light tower (9 meters), hydraulic support legs and a hydraulic nose wheel. Changes and typographical errors reserved.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Shrinking device for diameters 3-32 mm; HSS and HM; shank tolerance H6; simultaneous heating and cooling; base unit dimensions approx. 500 x 670 x 700 mm. Speed Cooler with rear wall including 5 heat sinks. The information has been taken from a brochure and is therefore provided without guarantee. Gtedpfx Asyia Rwebreu

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Water cooler for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding unit POLYSOUDE PS 204 + RC 200 Year of manufacture: 1996 Serial number welding source: 9785153 Serial number cooling unit: 968628 Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Mains connection: 230 volts, 50 Hz, Schuko plug - Note: Display on the power source becomes illegible after some time - Remote control cable type BP 1436 with 7.5 meter connection cable - Adjustable output from 1 to 200 amps Gjdpeyhq A Rofx Abrotu - DC only - HF ignition - Cooling water unit for torch cooling - 118,643 operating hours (read off) - Operating and maintenance manual Space requirement welding machine (L x W x H): 550 x 360 x 500 mm Space requirement cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Note: Display on power source becomes illegible after some time Without accessories Price applies to one set consisting of 1x power source and 1x water cooler.

Condition: used, New three-phase electric motor 37 kW three-phase motor SIEMENS Heavy-duty motor, electric motor, squirrel cage, asynchronous motor Type 1LE16032AA534GB4 Design V1 Frame size 200L Motor speed 2955 rpm Current draw 65 amps Motor power 37 kW Mains connection 400 Volt, 50 Hz Shaft diameter Ø 55 mm Shaft projection length 110 mm Keyway width in shaft 16 mm Flange diameter 400 mm Centric diameter 300 mm Pitch circle diameter Ø 350 mm - Flange motor with 4 mounting holes Ø 19 mm Overall housing length without shaft 640 mm Overall housing length with shaft 740 mm Required installation space (L x W x H) 740 x 400 x 520 mm Net weight 250 kg Gsdpfeyhq Awsx Abretu Excellent condition – new, unused from stock clearance

Condition: used, Hydr. flat form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic unit) Year of manufacture 1991 Gedjl Nbqcjpfx Abrjtu Nominal lifting capacity 1500 kg Lifting capacity (practically tested) 1000 kg (at approx. 350 bar) platform size 2100 x 1400 mm stroke max. 930 mm Overall height - bottom 100 mm (with mounting frame) Overall height - top 1030 mm Hydr. operating pressure 350 bar = lifting force 1000 kg Motor power of hydraulics 1,5 kW mains connection 400 Volt, 50 Hz - mechanical-hydraulic safety limit switches stop the lowering process when the safety bar is actuated - without hydraulic power unit - without electric control length of installation frame 2270 mm width of mounting frame 1580 mm height of mounting frame = height at bottom 100 mm dead weight of lifting table 500 kg good condition

Condition: used, Micro welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO Type ISQ-MG - Spot welding head MIYACHI PECO Type F160S – 25 mm stroke with Heidenhain measurement system Gtodpfx Abspy Uzyereu - Connection cables Mains voltage: 3x 400 V AC Mains frequency: 50 / 60 Hz Connected load: 22 KVA Welding current types: AC / DC Output current: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external toroidal coil Control panel: MFT1 (independent removable control unit) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Error monitoring and process control - Monitoring of current, voltage, power, energy - Test pulse for part recognition - Program memory for 99 programs Inverter dimensions (W x H x D): 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated current: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force ignition from 1.2 to 550 N - Heidenhain distance measuring system Welding unit with 5 pneumatic cylinders and Festo valve terminal Type CPX Welding head mounted on horizontal guide rail and can be moved 20 mm via pneumatic cylinder. 3 pneumatic cylinders available for workpiece clamping (2 units with 46 mm stroke, 1 unit with 20 mm stroke). Throat depth (distance from welding tip to frame): 300 mm Welding tip height above floor: 315 mm Welding unit dimensions (W x H x D): 410 x 760 x 700 mm Welding unit weight: 75 kg Total weight: 100 kg 2 nearly identical units available, price per complete unit.

Condition: used, functionality: unexamined, Ferwood Code: RU0005376 - Manufacturer Code: TVM 2.2-050-220/300-W1 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Gtedsv Efi Ajpfx Abrsu

Year of construction: 2012, condition: good (used), Power generator, emergency power generator, generator, power generator, power generator, emergency power generator, power generating unit -Manufacturer: SAB, Power generating unit type D-4107 F -Previous use: Ship Gtedeh I Ez Dspfx Abrsu -Power: 44/55 kW/kVA 50 Hz -Engine: Deutz type BF 4M 2012 60 kW -Generator: Marelli type MJB 200 MA 4 -Note: without control, without cooling -Individual components: see photos -Dimensions: 1630/710/H1060 mm -Total weight: 840 kg

Condition: excellent (used), 3HAC029818-001 DSQC663 HV MDU Power unit Gtedpfx Asygqnksbreu DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: good (used), Year of construction: 2007, Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Manufacturer: Sauer Sundstrand, hydraulic unit from Atlantic ATS 3006 guillotine shear -Hydraulic pump: double version -Motor: EMI 7.5 kW / 1440 rpm -Dimensions: 790/330/H295 mm -Weight: 83.6 kg Godpfsyghunsx Abrstu

Condition: used, Holz Her Sprint 1329 Power Heavy-duty design – edge thickness 0.4 – 8 mm (15 mm with tool change) 21.5" PPC 332 touchscreen control fa.s.t. setting technology “Set-up on the fly” Motorized, CNC-controlled bridge height adjustment Fully automatic edge magazine for roll and strip material (MOT) Pre-milling unit for jointing before the gluing station GLU-JET glue application station – for cartridge, granulate & PU adhesive, thin film technology Maximum edge height: 60 mm Adjustable glue height / sensing nozzle Gsdpfx Absyi Algerstu Pressure unit 1913, motor-driven and pneumatic NC servo axis End trimming unit for roll and strip material up to 15 mm edge thickness With electro-pneumatic adjustment of the end saw angle from 0-10° MOT6 multi-function milling unit – 6 NC-controlled axes: Flush trimming 8 mm (15 mm) Radius milling Bevel milling 0–15° pneumatically MOT4 copying milling unit – 4 NC axes, corner copying, postforming corners: for machining the upper and lower longitudinal edge, and copying the front and rear vertical edges; working height 60 mm, includes shelf program MOT4 scraper unit Flat scraper unit – finish with pre- and post-sensing Buffing unit for final cleaning and edge polishing with 2 textile discs, tiltable by 5° Spray units for entry and exit section as well as antistatic agent at the pressure unit Entry section: electronically controlled separating agent spraying system Pressure unit: electronically controlled antistatic spraying system Exit section: electronically controlled cleaning agent spraying system with detergent Air cushion table at feeding side / L = 1800 mm, W = 600 mm First delivery in 2022 Machine is WORKSHOP TESTED and in TOP CONDITION Available ex stock Lieboch