Used Power Harrow for sale (37,010)

Condition: new, Year of construction: 2025, Z-MaT Power V10 New Design Vertical CNC Machining Center Siemens 828D, Shop Mill 15" Touchscreen with 5 axes (3+2, 255mmØ table) Axis Travels X-axis travel: 1050 mm Y-axis travel: 650 mm Z-axis travel: 600 mm Spindle nose / Table: 120–720 mm Work Table Table size: 1400 x 650 mm Max. table load: 1,000 kg T-slot size: 18 x 5 x 100 mm Spindle Data Spindle: SK 40, 12,000 rpm DDS, incl. oil chiller Spindle motor: 18.5/15 kW Tool Changer Double-arm gripper, 30 positions / 8 kg Feed Rates Cutting feedrate: 0–12,000 mm/min Rapid traverse (X/Y/Z): 30 m/min Dimensions & Weight Overall dimensions: 3,200 x 2,500 x 2,450 mm Total weight: 8,200 kg Standard Equipment - Full enclosure - Electronic handwheel (MPG) - Spindle oil cooler Dcjdpfxeww A Dyj Ab Ujf - LED work area lighting - Air blast through spindle - LED status signal light (3 colors) - Automatic central lubrication system - Coolant system with nozzles around the spindle - Coolant chip flushing system - Tapping without compensation chuck - 3-axis linear roller guides - Electrical cabinet heat exchanger - Ethernet, CF card, USB interface - Leveling bolts and machine feet - Toolbox - Coolant gun - Air gun - Operating manual - CE compliance Including special accessories: - Spiral chip conveyor - Coolant through spindle, 30 bar - 3+2 axis table, 255mm diameter Note: Video shows a machine of a different series with 3+2 axis table This machine will be exhibited at EMO, Hall 12/D10, and will be available immediately after the show.

Year of construction: 2025, condition: used, New: Yes Empty weight: 10.000 kg Serial number: 2411167 Dcedpfov Th H Hjx Ab Uef Transport dimensions (LxWxH): 4x2,1x2,1 Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information

Year of construction: 2025, condition: used, New: Yes Empty weight: 35 kg CE mark: yes Dsdpfx Ajxdhfgsb Ujcf Serial number: 25050168 Transport dimensions (LxWxH): 0,54x0,292x0,582 Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information

Year of construction: 2025, condition: used, New: Yes Dodpfxevxdx As Ab Uscf Empty weight: 400 kg CE mark: yes Transport dimensions (LxWxH): 1,5x1,3x1,07 Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 23900101, Equipment: type plate available, PACKAGING MACHINE FOR FOOD PRODUCTS SUCH AS MEAT, COLD CUTS, CHEESE, IN FILM PACKAGING UNDER VACUUM OR IN INERT GAS. THE MACHINE HAS FIVE FORMATS. I HAVE A LARGE SET OF SPARE PARTS FOR THE MACHINE: KNIVES, SEALS, VALVES, ETC. Dedpfx Asw Emh Eeb Uocf

Condition: new, pressure 175 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 180 mm/sec work speed 10.0 mm/sec return speed 135 mm/sec work stroke 275 mm dayligth 550 mm table height 900 mm table width 90.0 mm oil volume 200 ltr. voltage 400 Volt total power requirement 15.0 kW weight 9450 kg range L-W-H 4250 x 2150 x 2800 mm ----- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA-58T graphic/touch screen * 2D graphical programming * 15" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface Dedpexaax Refx Ab Uocf - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "Sliding-System", with T-slot and cam - 1x double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes

Condition: used, Year of construction: 2012, operating hours: 5,570 h, Digging depth approx. 5,000 mm, dump height approx. 5,700 m Dodpfx Askd Hipob Ujcf engine Deutz 4-cylinder TCD 2012-L04, 5.1 km/h, 500 rubber tracks, approx. 2,490mm dozer blade, additional piping -6x approx. 1.95 m. trench bucket, Powertilt PTS-10 swivel device, Lehnhoff mechanical quick coupler MS 10, approx. 1.95 trench bucket + approx. 50cm deep drainage bucket ----Sale only to businesses. ONLY THE NET PRICE IS TO BE PAYED FOR EXPORT !!!!! ALL INFORMATION IS WITHOUT GUARANTEE. EQUIPMENT + ACCESSORIES.The basis of all purchase contracts, invoices, pro forma invoices, orders and sales talks are our general terms and conditions (see legal notice).

Condition: used, Year of construction: 2012, operating hours: 5,570 h, * Digging depth approx. 5,000 mm, * Dumping height approx. 5,700 m * Engine Deutz 4-cylinder TCD 2012-L04, * 5.1 km/h, * 500 series rubber tracks, * approx. 2,490mm dozer blade, additional piping -6x approx. 1.95 m. trench bucket, Powertilt PTS-10 swivel device, Dsdpfxekd Hiwe Ab Ujcf * Lehnhoff mechanical quick coupler MS 10, * approx. 1.95 trench bucket + approx. 50cm deep drainage bucket ----Sale only to businesses. ONLY THE NET PRICE IS TO BE PAYED FOR EXPORT !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE. EQUIPMENT + ACCESSORIES.The basis of all purchase contracts, invoices, pro forma invoices, orders and sales talks are our general terms and conditions (see legal notice).

Condition: excellent (used), Power Supply Manufacturer: Siemens Model: Sitop PSU100L Input: AC 100-240V, 5.55-2.35A, 50/60Hz Output: DC 24V/20A 12 units are available individually, and several more are installed in control cabinets. We have multiple control cabinets in stock, with various configurations or also empty. Djdpfx Asywycmsb Uscf

Condition: excellent (used), Switch Mode Power Supply Manufacturer: Murr Elektronik Model: Emparro 20-100-240/24 Dodpfx Aboywxz Uo Ujcf Art. No.: 85442 Input: 100-240 VAC, 50/60 Hz, 5.3-2.3 A 100-230 VDC.... Output: 24 VDC, 20 A, SELV IP20 8 units are available individually, and several more are integrated in control cabinets. We have various control cabinets in stock, with different configurations or also empty.

Condition: excellent (used), 3-jaw CNC power chuck, e.g. for a HYUNDAI-KIA SKT 100 M Dcodpjw Elp Iofx Ab Uef Diameter: 150 mm Spindle mount: A 2-5 Speed range: max. 6,000 rpm Through bore: 42.5 mm Weight: 8 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, Edgebanding Machine HOLZ-HER 1308 XL AURIGA POWER -Showroom machine- Innovation: GLUJET GJ725 This offer concerns an equipment package. The following components and options are already included in the price: - Extendable workpiece support - Edge Control PPC 322 W control system - ECO MODE energy-saving mode - Jointing cutting unit FG201 with 2 milling heads - Diamond milling cutter Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation - Diamond milling cutter Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation - Edge feed 1903 - Glue application system Glu Jet GJ725 NC PUR PRO - Pressure unit 1912-3 pneumatic - End trimming unit 1918 pneumatic 60 mm - Multifunctional milling unit FR301 MOT6 - Diamond milling cutter Ø 56/60 mm, left-hand rotation - Diamond milling cutter Ø 56/60 mm, right-hand rotation - Corner rounding unit FF301 MOT1 Dedpfju R Sy Ajx Ab Uscf - Scraper unit ZK301 MOT4 incl. high-gloss package - Carbide reversible knives for scraper carrier - Chip collection box for scraper unit - Buffing unit 1940 - Spray device TR301 for infeed and outfeed areas - Motorized pressure bridge adjustment - iTronic-adaptive pressure and glue quantity control - Extended infeed fence 1,252 mm - Motorized adjustment for infeed fence - Pressure unit DW301 with motorized NC axis - Extraction hoods for end trimming unit 1918 - Shelving program - Surface scraper FK701 - Spray device GM301 after the pressure unit - new showroom machine -

Condition: used, Used 2 MW wood biomass power plant built in 2009 and running until February 2023. Plant is made up of a steam boiler that uses forest waste as fuel and a condensing steam turbine generator, electrical room, control room. Main equipment includes: - Biochamm BCV-11.0000 CA biomass boiler built in 2008 with approximately 23,665 hours of use. - Boiler feed system made in 2008 with approximately 22,549 hours of use. - Atlas Copco compressors made in 2008. - Water treatment plant made in 2008. - Hamworthy condenser made in 2008 with 22,539 hours of use. - Siemens SST-110 (TWIN AFA46 GT6) steam turbine made in 2008, with 22,539 hours of use and 563 starts. - Leroy Somer L57 54 m7/41 alternator made in 2008 with 22,539 hours of use. Dodpoyhc Irefx Ab Uocf - EWK cooling towers made in 2008 with approximately 23,102 hours of use. - Fivemasa HVAC made in 2008. Available for relocation or in-situ with land and buildings.

Condition: used, Generator, Power Generator, Used Machine Overall dimensions: Length: 830 mm Width: 510 mm Height: 560 mm Manufacturer: Europower Outputs: 2 × single-phase output 230 V, 30.4 A, 7 kVA Weight: 40 kg Dcjdpfxsypvwio Ab Uef

Condition: used, Bar contactor, DC contactor, contactor, DC switch, power contactor, circuit breakers, high voltage switches ABB Type NORR63-03 CC-SP FPL7146886R6000 CTC2014028R0001 Contactor Type: normally closed Main contacts Design: open mounted on ingots Drive: Alternating current + bleached magnetic circuit +rectifier + economy resistor Drive Nominal voltage: 220-230 V / 50-60 Hz Main contact rated current: 63 A Dsdpfjfipfujx Ab Uecf Main contact Nominal voltage: 1500 VDC Number of main contacts N/O contact: 0 Number of main contacts normally closed: 3 Number of auxiliary contacts: 1 NC contact + 1 NO contact + 1 changeover contact Auxiliary contact rated current: 6 A - Main contacts with deion chambers for fast spark quenching Dimensions W x H x D: 410 x 250 x 195 mm Weight: approx. 9 kg Used but in very good condition

Condition: used, Heavy Duty Powered Roller Conveyor KASTO with Steel Support Rollers Straight roller conveyor section with highly robust steel support rollers Roller conveyor length: 2000 mm Usable width (roller width): 500 mm Conveyor height: 880 - 930 mm Number of rollers: 7 pieces Roller spacing: 4x 295 mm, 2x 390 mm (center-to-center) Roller diameter: Ø 100 mm Transport speed level 1: 3 meters/min Transport speed level 2: 13 meters/min Motor power: 0.17 / 0.7 kW Electrical connection: 400 Volt, 50 Hz - Reversible operation (right and left) - 2 transport speeds via drive motor with 2 speeds - All rollers driven, chain drive - Drive via FLENDER HIMMEL geared motor - Geared motor with brake - 1 adjustable-height support foot via slotted holes - Very robust and heavy design with ball-bearing steel rollers - Metal base frame, frame length 2230 mm Dsdpsu Uwygefx Ab Uocf Required space (L x W x H): 2650 x 870 x 900 mm Net weight: 580 kg Good condition

Condition: used, Hydr. scissor lift table WEIDMANN type E5/13-1 Serial no. 30403339 Year of construction 1982 / 2007 Load capacity 500 kg Platform size 2000 x 1200 mm Lift max. 1280 mm Overall height - table bottom 290 mm Overall height - table top max. 1570 mm Table height with safety support 1430 mm Lifting speed 1280 mm in 25 sec. Lowering speed 1280 mm in approx. 0 to 15 sec. Hydraulic operating pressure approx. 130 bar Motor power 1.5 kW Dodpfx Abohlnznj Ujcf Mains connection 400 Volt, 50 Hz. - Rotary switch on the hydraulic unit for up and down - Infinitely adjustable lowering speed via throttle valve - 1 lifting cylinder - Hydraulic unit built in 2007 with tank opposite - Safety protection frame with limit switches dead weight 660 kg good condition

Condition: used, Hydraulic power unit with hydraulic pump RACINE / VICKERS Hydraulic power unit Operating pressure: max. 44 bar Volume flow: 13 litres/min. Dsdpfx Asgprpneb Uscf Tank capacity: 40 litres Engine speed: 950 rpm Engine power: 0,75 kW Mains connection: 380 Volt, 50 Hz - 1 piece hydraulic vane pump PVQ-PSS=-06CR-J11 - Hydraulic tank with maintenance cover and oil level sight glass - 2 hydraulic hoses with 12L connections, length = 950 mm Space requirement L x W x H:: 700 x 400 x 750 mm Own weight: 97 kg (without oil content)

Condition: used, Hydraulic power unit with hydraulic pump BOSCH REXROTH / HYDRONORMA Hydraulic power unit year of construction approx. 1985 operating pressure: max. 65 bar volume flow: 20 litres/min. tank capacity: 110 litres Engine power: 3 kW Engine speed: 1440 rpm. Mains connection: 400 Volt, 50 Hz - 1 piece hydraulic vane pump MANNESMANN REXROTH, type 1PV2V3-40/25RA01MC63A1 - 1 piece drive motor KATT, type FFN 100L - 1 piece pressure reducing valve BOSCH REXROTH, type DR 8 G433/100 YM - 1 piece return filter - 1 piece 4/2-way manual valve (e.g. for extending and retracting a double-acting hydraulic cylinder) Dcodpjgprpgsfx Ab Uef - Hydraulic tank with maintenance cover and oil level sight glass Space requirement L x W x H 900 x 550 x 1150 own weight: 142 kg good condition

Condition: used, High current EMC filter SCHAFFNER type FS 20364-1200-99 3 phases, 3 x AC ballast, mains connection module, mains filter Dcodpfed D Dh Ajx Ab Uef Input voltage: 3 x 400 VAC Input frequency: 50 / 60 Hz. Rated current: 3 x 1200 A Dimension W x H x D: 135 x 260 x 235 mm weight: 27,5 Kg very good condition, from stock liquidation, unused 2 pieces available, price per piece

Condition: used, E-welding machine, stick electrode welding machine ESAB Type LTG 250 Dcedpfxjd N E Rvs Ab Usf Machine no.: 736-820-387 Year of manufacture: 1997 Output: 250 A = 35% duty cycle 190 A = 60% duty cycle 150 A = 100% duty cycle Power setting: stepless - Electrode holder with 6 m connection cable - Direct current (DC) - Fan-cooled - TIG welding may also be possible, but without torch package Power supply: 380 V, 50 Hz, 32 A plug Dimensions (L x W x H): 1200 x 750 x 1050 mm Weight: 180 kg Good condition The unit was originally designed for TIG welding as well. The torch package for TIG welding is not included and its function has not been tested. The water cooling was intended for the TIG torch package. Therefore, the unit is being sold only as an electrode welding machine. Test welds with stick electrodes show excellent welding results.

Condition: used, Programmable AC power source voltage regulator Laboratory Power Supply, Power Supply, Programmable AC Power Source CHROMA Type 6415 : 64150296 Year of manufacture approx. 2000 Input values - Dcodpfjdz Srajx Ab Ujf Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values- Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. Output current: 15 A / 7.5 A Output power: 1500 VA Efficiency 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation 0.1% Output frequency: 45 - 1000 Hz. Accuracy: 0.1 Resolution: 0.1Hz Measurement: V, F, I, P, PF, CF MAIN FUNCTIONS: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limiting - Integrated output cut-off relays - EEPROM memory for user-defined voltage and frequency combination for instant recall at any time - Optional GPIB, RS-232 and analog programming interface - Over voltage, under voltage, over power, over current, over temperature and short circuit protection - Temperature-controlled fan speed - Self-test when switching on - Supplied as shown, without additional accessories and connection cable Additional connections: - BNC (EXT VREF) - 9 Pol. D-Sub (RS-232C interface) - 24 Pol. Centronic (GPIB) Space requirement H x W x D 221.5 x 425 x 567 mm Weight: 23 kg good condition

Condition: used, Programmable AC power source voltage regulator Laboratory power supply, power supply, Programmable AC Power Source CHROMA Type 6415 : 641500000 363 Year of manufacture approx. 2000 Input values - Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values - Output voltage range: 0 to 150 VAC / 0 to 300 VAC Dsdedz Srbspfx Ab Uecf Max. output current: 15 A / 7.5 A Output power: 1500 VA Efficiency 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation 0.1% Output frequency: 45 - 1000 Hz. Accuracy: 0.1 Resolution: 0.1Hz Measurement: V, F, I, P, PF, CF MAIN FEATURES: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limit - Integrated output isolation relays - EEPROM memory for user-defined voltage and frequency combination for immediate recall at any time - Optional GPIB, RS-232 and analog programming interface - Overvoltage, undervoltage, overpower, overcurrent, overtemperature and short circuit protection - Temperature controlled fan speed - Self-test when switched on Additional connections: - 9-pin D-Sub (Trigger In, AC On, etc.) - 25-pin D-Sub (printer) - BNC (EXT VREF) - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) - 25-pin D-Sub (System I/O) - 3x BNC (Sync / Clock / VREF) - Manual in PDF format Space required H x W x D 221.5 x 425 x 567 mm Weight: 23 kg good condition 2 pieces available, price per piece

Condition: used, functionality: fully functional, Röhm Spannstock SSP 315/3 - ID No. 161508 - Pneumatically actuated stationary clamping block - 3-jaw power chuck Dodpfx Absyuwh Ts Uocf - Operating pressure: 6 bar - Clamping force: 111 kN - Outer diameter: 415 mm

Condition: used, Year of construction: 2024, The control of the dust extraction system is switched on and off via 2 sensors. Suitable for installation on an existing transport system Sword brush Micro-moistening of the brush elements by means of an antistatic moistening nozzle from Riepe. Moisturisation can be finely dosed via this nozzle. Cleaning the product surface using Sword Brush technology The dust particles are picked up by the brushes and removed by the suction system. A rotating squeegee and compressed air nozzles ensure constant cleaning of the brush systems. Power channel The power channel contains 14 rotating double power compressed air nozzles, which remove particles and dust from the material surface and from recesses. The suction system removes the loosened particles. Technical data: Power: 0.5 kW Self-cleaning system via the rotating brush Dust extraction: 2 x D120 mm at the top + 2 x D80 mm on the side. Motorised height adjustment Dcsdpfx Asun N Auob Ujf Material of the panels to be cleaned: MDF, chipboard with melamine Workpiece length: min. 400 mm Panel width: max. 1,350 mm Workpiece height: max. 80 mm Feed speed: max. 35 m/min Removal standard: workpiece surface dust-free Important: Glue residues are not removed. Size of the machine: Width: 2,280 mm Installation length: 500mm