Chain harrow buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbu8vh72vq HASKO 16 Lateral chain feeder ; with (4) roller accelerator -- 16'-0" (8) chains accross deck. Work piece dimensions: Length 2'- 16'; Width 2" to 9.5"; Thickness 1/4" to 3". -- Feed system variable speed 50-100 FPM, with a 10 HP variable speed drive. (2) Smooth steel bottom rollers, (2) Urethane feed rollers from above, pneumatically operated. Feed rollers and feed chains driven electronically. Proximity switch for material detection. Height a... more
6
Technical data feeding conveyor, underfloor, position 12 Manufacturer Bollegraaf Typ HBT 1200/1600 Year of construction 1998 Driving motor 5,5 kW Length feeding conveyor 9,440 mm Effecting width 1,550 mm Height of side wall feeding conv. 550 mm Transport dimensions over all approx. 9,600 x 2,300 x 1,500 mm (L x B x H) Weight approx. 5,000 kg Technical data elevating conveyor with goose neck, position 15 Bb8dq7ym Manufacturer Bollegraaf Typ HBT 1200/1600 Year of construction 1998 Driving m... more
7
wire diameter range: 1,8 - 3,8 mm mesh width: 20 - 80 mm Bcy7ya3vp7 working width: 800 - 2.000 mm output: up to 180 m²/hour more
3
weight max. 0,125 / 0,25 t stroke 3000 mm clamping width mm stroke speed 125kg 8 / 250kg 4 m/min total power requirement 0,13 kW weight of the machine ca. 0,30 t 2kvglhdaf dimensions of the machine ca. m electrical chain hoist no fine hoist more
Bczb3bvrzy double spiral wire diameter 1,5-3,8 mm mesh width 20-80 mm working width 2000 mm capacity - m²/hour 150 m² tolling for mesh 50 mm more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Dv0rlrl WEINIG MSL LCF-8 Lateral chain feeder (seller shortened from 16'); with (4) roller accelerator -- 8'-0" (5) chains accross deck. Work piece dimensions: Length 2'- 16'; Width 2" to 9.5"; Thickness 1/4" to 3". -- Feed system variable speed 50-200 FPM, with a 10 HP hydraulic feed variable speed drive. (2) Smooth steel bottom rollers, (2) Urethane feed rollers from above, pneumatically operated. Feed rollers and feed chains driven electronically. Prox... more
6
Manufacturer BOA Typ 1700 HSB KTH Year of construction 2002, overhauled in 2017 Driving motor 5,5 kW Length feeding conveyor 4,000 mm overall D89vefed Length elevating conveyor 14,000 mm Length goose neck 1,530 mm Grade 30 ° Effecting width 1,700 mm Dimensions feed hopper Inside dimensions 1,920 x 1,090 x 3,100 mm (w x d x h) Outside dimensions 2,100 x 1,700 x 3,100 mm (w x d x h) Comments: The conveyor belt and hopper were completely overhauled. The frame construction and side walls as well ... more
4
Bfgnmyt0 wire diameter range: 1,5 - 5,0 mm mesh width: 20 - 100 mm working width: 800 - 3.000 mm more


chain harrow
daily

New machines via email!

Stay updated!
2
bearing load 1,000 kg hook way approx. 2,500 mm parts of chain 2 Meebt speed of idle stroke 4 / 1m/min with bearing roller chassis electrical data 380V / 0.75 / 0.18KW complete weight approx. 50 kg *- condition as good as new - * more
2

Chain Hoist - Manual HADEF 1.000

Ahaus, GermanyGermany dealership location
6367 km
1985
used
weight max. 1,0 t Beam size 0 mm Gfwlkgh weight of the machine ca. 13 kg. more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbus0fghny PINHEIRO AMA 300 Dip Chain Gang Rip Saw: 12" Capacity, max. width; 4-1/3" max cutting depth; 13-3/4" max. blade diameter; 50 HP main motor. -- Variable speed from 23 - 180 FPM (7 - 55 MPM), Ductile iron chain for long and dependable service life, mechanical feed works with 3 HP drive, double-V rail chain guide system, feed chain with knurled links, and (6) holddown rolls for excellent feeding pressure to the chain. -- Complete with: 70 mm Sle... more
6
Manufacturer Bollegraaf Typ HBT 600/2000 x 21,986 Year of contruction 2000 (overhauled 2017) Drive power 7,5 kW Bb2effqc Length infeed conveyor over all 6,723 mm Length module infeed conveyor 5,500 mm Height infeed conveyor over all 1,300 mm Height side wall infeed conveyor 500 mm Length elevating conveyor over all 13,923 mm Lenght module elevating conveyor 13,300 mm Height side wall elevating conveyor 800 mm Gradient of elevating conveyor 30° Length gooseneck 1,340 mm Lenght module gooseneck 1... more
6

circular harrow Comeb FPSRXAPI330

Willich, GermanyGermany dealership location
6368 km
2010
used
working width 3,3 m Fhhicqrb0 speed of [...] shaft 540 U/min milling unit 4 St more
4

four stop chains H 1 22 x 66 x 6000

Minden, GermanyGermany dealership location
6476 km
used
bearing load 15 tons hook - hook usable length 6,000 mm Yxcuksuv0 nominal thickness of chain 22 mm cracking test according to BGR 500 new in 2012 more
3

Chain Hoist - Manual HADEF 2.000

Ahaus, GermanyGermany dealership location
6367 km
1985
used
weight max. 2,0 t Bbj9ihqekm Beam size 0 mm weight of the machine ca. 13 kg. more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Iwfnd3f COSMEC SM120 DIP CHAIN RIP SAW 11-7/8" Arbor cap., 40 HP arbor motor,Specifications: --3-1/2" max. cutting height, 23" min. board length; 50 mm dia. --3,700 RPM arbor --10" min. to 13-3/4" max. blade dia. -- 12-5/8" Wide feed chain --2-speed feed motor with 0.8 HP & 1.2 HP & inverter controlled variable feed speed for each motor --Speed range of 13 - 40 FPM and 26 - 80 FPM --1 HP motorized opening of the pressure roller assembly. -- Comple... more
6

Baler 78,5 tons with chain belt conveyor BOA [...]

Scheemda, NetherlandsNetherlands dealership location
6317 km
2002
used
Manufacturer BOA Type [...] Year of construction 2002 Press power main press 78,5 tons Press power of pre-presses 41,7 / 47,2 to Feed channel 1,620 x 1,080 mm (l x w) Capacity per cycle time 2,5 cbm Bale size 1,100 x 800 mm (w x h) length adjustable Driving motor 55 kW Connected load 80 kW Tying system 4-fold vertical, 2-fold horizontal, fully automated Bale weight approx. 500 up to 600 kg Weight approx 18 tons Comments: Inspections are possible after agreement. We will not assume liability fo... more
6
BalkankarLiftketand so on Cejy8r23i more
3
bearing load 45to two-string usable length 5,000 mm Grafjfzny nominal thickness of chain 32 mm cracking test according to BGR 500 new in 2012   more
2

Chain Hoist - Manual TIGRIP TBT 10

Ahaus, GermanyGermany dealership location
6367 km
1984
used
weight max. 300 kg Beam size 60 - 80 mm weight of the machine ca. 7,0 kg. Ga2r88bck more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Bbus7odfkd MEREEN-JOHNSON MODEL 424 DIPCHAIN GANG RIPSAW -- 24" Arbor width cap., 14" max. dia. tooling, 3-1/2" max. motorized thickness adjustment, 29" min. length for glue joint accuracy and 22" min. for busting only, 6" throat. -- Equipped with: 75 HP - 3,600 RPM TEFC direct drive motor, arbor with disc brake & load meter, arbor lockout on access door. -- Feed & chain: 5 HP Variable feed speed 30 - 170 FPM with adjustable jam protection, M-J "Posi... more
6
Manufacturer Lindemann Typ BIGRO 1027 V Year of construction 1989 Press power main press 100 tons Specific press capacity 12,1 kg/cm² Press power free stamper 24 tons Feed channel 1,060 x 1,400 / 2,000 mm (l x w) Bale size 1,100 x 750 mm (w x h) length adjustable Driving motor 2 x 55 kW Connected load 138 kW Tying system 4-fold vertical, fully automated Throughput rate at a bulk weight of 20 up to 30 kg/cbm approx. 8 up to 11 to/h bulk weight of 40 up to 60 kg/cbm approx. 13 up to 16 to/h bulk... more
2

hoist GIS GCH 2000NF

Vellmar, GermanyGermany dealership location
6555 km
2006
good (used)
Chain hoist used in very good condition Capacity 3,2 tons Hook path 6, 0 m Lifting speed 4/1 m / min Control bottle with the cable 5, 0 m See more technical data PDF-document Fiqtiwt0s more
3
bearing load 1,500 kg speed of stroke 1 / 4m/min with electric chassis running speed 4 / 16m/min Meeb7 chains 7/8 x 23 mm complete electric and traction motors for crane bridge existing more
2

Chain Hoist - Manual TIGRIP TBT 40

Ahaus, GermanyGermany dealership location
6367 km
1985
used
weight max. 2,0 t Shtxqdoj Beam size 100 - 150 mm weight of the machine ca. 16 kg. more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Hiidnifaa MEREEN-JOHNSON 424 Gang Ripsaw24" Arbor width cap., 14" max. dia. tooling,Specifications: -- 3-1/2" max. motorized thickness adjustment, 29" min. length for glue joint accuracy and 22" min. for busting only, 6" throat. -- Equipped with: 75 HP - 3,600 RPM TEFC direct drive motor, arbor with disc brake & load meter, arbor lockout on access door. -- Feed & chain: 5 HP Variable feed speed 30 - 170 FPM with adjustable jam protection, M-J "Posi-Fee... more
6
Manufacturer Paal Typ Konti 700 E Year of construction 2007 Hours of operation 22,500 h Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 2,000 x 1,020 mm (l x w) Hmzpr0sp0 Capacity per cycle time 3,45 cbm Throughput rate under operating conditions 650 cbm/h Bale size 1,100 x 1,100 mm (w x h) length adjustable Driving motor 3 x 75 kW Connected load 255 kW Tying system 5-fold vertical, fully automated Throughput rate bulk weight of 30 kg/cbm approx. 16 tons/h bulk ... more
4

Chain Hoist - Manual YALE VS Plus

Düsseldorf, GermanyGermany dealership location
6394 km
2008
used
weight max. 2 t stroke 3000 mm total power requirement kW weight of the machine ca. 0,025 t dimensions of the machine ca. 0,3 x 0,4 x 0,2 m Whhcx93w0 more
4
bearing load: - 18 tons to 45° Yxcuud0j2 - 12.5 tons to 60° endless - cuttable usable length 8,000 mm nominal thickness of chain 20 mm cracking test according to BGR 500 new in 2012 more
2

Chain Hoist - Manual HADEF 2.000

Ahaus, GermanyGermany dealership location
6367 km
1985
used
weight max. 2,0 t Beam size 0 mm weight of the machine ca. 16 kg. Y0bmb0i more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Glpd3uefw PROGRESSIVE - Model SB/D 31, [...] Chain Gang Rip Saw. Specifications and features: -- 31" Cap. arbor with: Pneumatic arbor lock, 14" max. dia. tooling, 3-1/2" max. motorized thickness adjustment; 22" min. length for glue joint accuracy, 6" throat depth to fence side of blade. -- (1) 31-1/2" Saw sleeve with: Double-keys arranged for 3-1/8" bore saw blades. -- Equipped with: 60 HP - 3,600 RPM TEFC Direct drive motor, arbor with disc brake & lo... more
6
Manufacturer unoTech GmbH, Niederlangen, Germany Typ 120 V5 Year of construction 2009 Hours of operation 52.810 h, stand January 2018 Press force main press 100 tons Specific press force 145 N/m² Max. cutting force 120 tons Press force free stamper 25 tons Feed channel 2,000 x 1,020 mm (L x W) Capacity per cycle time 1,5 m³ Theoretic throughput rate 650 m³/h Bale size 1,100 x 750 mm (w x h) Driving motor 2 x 75 kW Connected load 160 kW D9ft2vux Rated current 280 A Tying system 5 fold vertical... more
4
with automatic lubrication Working length approx. 220 mm Max. Input speed 6,000 rpm Max. Output speed 3,000 rpm Ratio 1: 0.5 with autom. Lubrication via pneumatic interface Bcwet8ie32 with different accessory chains more
4
bearing load 60 tons four-string with compensator Fi3xnxzx usable length 2,000 mm nominal thickness of chain 32 mm couple chain links with shackle 35 tons cracking test according to BGR 500 new in 2012 test number 29186 weight approx. 318 kg chain inspection in 2012 *- as good as new - unused -*   more
2

Chain Hoist - Manual TIGRIP TBT 10

Ahaus, GermanyGermany dealership location
6367 km
1984
used
weight max. 300 kg Beam size 60 - 80 mm weight of the machine ca. 7,0 kg. Bbj9h788wl more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbus7er9wc MEREEN-JOHNSON MODEL 424 DIPCHAIN GANG RIPSAW -- 24" Arbor width cap., 14" max. dia. tooling, 3-1/2" max. motorized thickness adjustment, 29" min. length for glue joint accuracy and 22" min. for busting only, 6" throat. -- Equipped with: 75 HP - 3,600 RPM TEFC direct drive motor, arbor with disc brake & load meter, arbor lockout on access door. -- Feed & chain: 5 HP Variable feed speed 30 - 170 FPM with adjustable jam protection, M-J "Posi... more
4

circular harrow Lemken Zyrkon 7 300

Willich, GermanyGermany dealership location
6368 km
used
working width 3 m Baqk88e9r8 speed of [...] shaft . U/min numbers of tine holder 11 more

Chain link fence Wafios VDF 80

More Wafios Vdf 80
Bad Bentheim , GermanyGermany dealership location
6367 km
1982
excellent (used)
Bcvxbxg92k Wire diameter: 1,8 - 3,8 mm Width: 20 - 80 mm Working range: 800 - 2.000 mm Power max. 180 m²/hour more
3
bearing load: - 45tons to 45° - 18tons 45 to 60° Yxcubbpbz two-string usable length 6,000 mm nominal thickness of chain 20 mm cracking test according to BGR 500 new in 2012   more
1

Chain Hoist - Manual EATON

Ahaus, GermanyGermany dealership location
6367 km
1981
used
weight max. 4,5 t Na8of stroke 1,35 mm total power requirement manuell kW weight of the machine ca. 35 ca. kg. more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Xwjbm0q MEREEN-JOHNSON MODEL 424 DIPCHAIN GANG RIPSAW -- 24" Arbor width cap., 14" max. dia. tooling, 3-1/2" max. motorized thickness adjustment, 29" min. length for glue joint accuracy and 22" min. for busting only, 6" throat. -- Equipped with: 75 HP - 3,600 RPM TEFC direct drive motor, arbor with disc brake & load meter, arbor lockout on access door. -- Feed & chain: 5 HP Variable feed speed 30 - 170 FPM with adjustable jam protection, M-J "Posi-Fe... more


chain harrow
daily

New machines via email!

Stay updated!

to

to

Edit search
CHAIN HARROW
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close