Used Chain for sale (2,604)

Condition: new, conveyor belt length: 22,000 mm, conveyor belt width: 3,750 mm, overall weight: 800 kg, The flat spiral belt with S-hook is a woven belts consisting of left and right spirals which are twined together by means of straight cross rods. The spirals are attached under post-tension, whereby a very dense belt surface is created. The cross rods at the end are bended in the direction of the previous cross rod. The cross rod is then bended around the previous cross rod. Weight 800kg Width 3.75m Diameter of chains 1.2mm Kedpfx Aketp S E Ej Aona The flat spiral belts with S-sides are practically familiar with a restricted amount of applications. This however doesn’t mean that the belt type can’t be used for other applications: – Oven belts in bread & pastry in industry – A special version of the above mentioned is with duplex chains at the sides – Belts in tunnels serving high temperature treatment processes such as tempering, harden, sintering, hard soldering, etc.

Condition: good (used), Year of construction: 2001, 4 electric chain hoists, Fanr. CHAIN MASTER STAGE CONSTRUCTION Knodpfxewd Tgfj Ak Asa Type: VBG 70 LIFTKET, built in 2001. Lifting height: 20 m. Load capacity: 1000 kg without control block.

Condition: used, Chain conveyor - IDL000773 - length: 6,1 m - working width: 600 mm - electric motor: 1,1 kW - Chain conveyor with pushers after moulder or resaw. Kjdpfx Akjufib Ro Ajna

Condition: excellent (used), functionality: fully functional, power: 53 kW (72.06 HP), fuel type: diesel, overall weight: 9,520 kg, operation weight: 9,520 kg, Year of construction: 2019, operating hours: 2,353 h, Equipment: adjustable boom, air conditioning, centralized greasing system, gripper hydraulics, hammer hydraulics, rubber tracks, Kobelco SK85 MSR-7 / Powertilt / OQS / Air Conditioning / Hydraulic Adjustable Boom / 2 x Buckets • Manufacturer: Kobelco • Model: SK85 MSR-7 • Year of manufacture: 2019 • Operating hours: 2353 hours • Power: 53.7 Kw / 73 hp • Engine: Yanmar 4-cylinder diesel • Powertilt: Wheeled Tilt 90 • Hammer/Grapple hydraulic lines • High/Low speed • Central lubrication system • Swivel boom • Overload warning • Air conditioning • Hydraulic quick coupler • Hydraulic adjustable boom • Dozer blade • 360-degree camera • Bucket: 1.70 meters wide • Bucket: 50 cm wide • Transport length: 6.75 m • Transport width: 2.3 m • Transport height: 2.57 m • Total weight: 9520 kg • First owner • German machine • Immediately ready for use • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos excluded. Kodpfx Aozhwk Hsk Aena

Condition: excellent (used), functionality: fully functional, power: 138 kW (187.63 HP), fuel type: diesel, Year of construction: 2021, operating hours: 8,119 h, Equipment: gripper hydraulics, Kobelco SK260 NLC-10E/GPS Laser Topcon X-73X/Long Reach/Long Front • Manufacturer: Kobelco • Model: SK260 NLC-10E • Year of Manufacture: 2021 • Operating Hours: 8119 hours Knsdpfxezlg Rko Ak Asa • Power: 138 kW / 187 hp • 4-cylinder diesel engine • Engine: Hino J 05 EA-J05E-VB • GPS System: Topcon X-73X • Long Front • Long Reach • High and Low Speed • Heated front and rear windows • Rubber pads • Max. reach: approx. 18.53 m • Digging depth: 14.73 m • Radio • Overload warning system • Swivel bucket • 360° camera system • Heater • Air conditioning • Central lubrication system • Grabber hydraulics • Rotating beacon • Transport length: 14.50 m • Transport width: 3 m • Transport height: 3.20 m • Total weight: 28400 kg • German machine • Immediately ready for operation • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typographical errors not excluded. - Sale subject to our general terms and conditions.

Condition: used, weight max. 250 kg Knjdsykvbqjpfx Ak Aoa stroke / mm Load: 250 kg Chain length: 2.5 m Weight: approx. 30 kg

Condition: excellent (used), For sale: Mannesmann Dematic AG electric chain hoist, model DKUN 5-500 K V2. Knjdezvqk Aspfx Ak Asa A robust, industrial-grade hoist manufactured in Germany, designed for lifting loads. The chain and hook, as shown in the photos, are included. Technical data: Manufacturer: Mannesmann Dematic AG Type: DKUN 5-500 K V2 Lifting capacity: 1/1 – 0.50 t / 2/1 – 1.00 t Lifting speed: 15.0 / 7.5 m/min Motor power: 1.40 kW Power supply: 380–400 V Frequency: 50 Hz Current: 4.00–4.20 A Motor speed: 2720 rpm Protection class: IP55 Chain: 5.3 × 15.2 8DK Factory number: 63159709 Ident-No.: 836 334 44 Year of manufacture: 2000 Weight: approx. 39 kg Country of manufacture: Germany Condition: Used hoist, in the condition shown in the photos. Important information: one of the mounting bracket elements is partially broken off, which is clearly shown in the photos. This damage does not affect the operation or functionality of the hoist. Sold exactly as shown in the photos. PRICE INDICATED IS FOR 1 UNIT.

Condition: good (used), Year of construction: 1985, Electric chain hoist, crane, overhead crane, assembly crane, manual trolley, trolley, trolley drive, crane drive, crane travel, trolley -Manufacturer: Steel, electric chain hoist with chassis -Chain hoist: Type T 302 L, load capacity 500 kg -Main stroke: 4 m/min -Fine stroke: 1 m/min -Hook path: 5 m Kjdpfezt Rvasx Ak Ajna -Crane chassis: Maximum beam width 135 mm Dimensions: see photo and technical drawing -Transport dimensions: 600/550/H420 mm -Weight: 49 kg

Condition: excellent (used), Year of construction: 2020, VETTER P300 PROFI Crane System Manufacturer: Vetter Krantechnik GmbH Type: P300 Year of Manufacture: 2020 Machine Type: Two-rail gantry crane / crane system Kjdpfx Aezgvx Tsk Ajna Load Capacity: 1,600 kg For sale is a used VETTER P300 PROFI crane system with crane bridge, manual trolley, and electric chain hoist. The system is suitable for assembly work, production, mechanical engineering, maintenance, logistics, and general lifting and transport tasks in the industrial sector. Technical Data Span of Crane Bridge: 5,890 mm Support Distance L: 5,570 mm Support Distance B: 5,890 mm Length of Runway Girder: 6,150 mm Length of Cross Girder: 6,260 mm Overall Dimensions of System: approx. 6,590 x 6,590 mm Bottom Edge of Crane Bridge: 4,085 mm Bottom Edge of Portal Girder: 4,507 mm Overall Height: 4,905 mm Ceiling Height according to Drawing: 5,185 mm Operating Voltage: 400 V / 50 Hz Control Voltage: 24 V Classification: HC2 / S2 according to EN 15011 Steel Construction Group: 18/36/30 Electric Chain Hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of Manufacture: 2020 Load Capacity: 1,600 kg Lifting Speed: 4.0 / 1.0 m/min Power: 1.50 / 0.37 kW FEM: 2m / M5 Protection Class: IP55 Duty Cycle: 40 % Number of Load Chains: 2 Weight with 5 m Lift: 65 kg Manual Trolley Type: SiCO-HF 2000 A Load Capacity: 2,000 kg Girder Width: 66 - 220 mm Weight: 17 kg Equipment Crane Bridge Electric Chain Hoist SIXX8AF Manual Trolley SiCO-HF 2000 A Load Hook Floor Control Main Disconnect Switch Cable Festoon / Power Supply Steel Support and Girder Structure Inspection Book Available EC Declaration of Conformity Available Assembly and Operating Instructions Available Transport Data Longest Component: approx. 6.3 m Heaviest Single Component: approx. 300 kg Total weight of the system is approximately between 2,000 and 3,500 kg, depending on the installed steel profiles and foundation plates. Condition Used Optical condition according to pictures System was installed and in operation Inspection book and documentation available Scope of Delivery VETTER P300 PROFI Crane System Crane Bridge Electric Chain Hoist SIXX8AF 1.6 t Manual Trolley SiCO-HF 2000 A Support and Girder Structure Control / Operating Elements Main Disconnect Switch Documentation / Inspection Book EC Declaration of Conformity Assembly and Operating Instructions Accessories as Shown in Pictures The machines, tools, and other items visible in the pictures that are not explicitly described are not included in the scope of delivery. Shipping or freight transport possible. Subject to changes, errors and prior sale.

Condition: excellent (used), Year of construction: 2020, VETTER P300 PROFI Crane System Manufacturer: Vetter Krantechnik GmbH Type: P300 Year of manufacture: 2020 Machine type: Two-rail portal crane / crane system Load capacity: 1,600 kg For sale is a used VETTER P300 PROFI crane system with crane bridge, manual trolley, and electric chain hoist. This system is suitable for assembly work, production, mechanical engineering, maintenance, workshop operations, logistics, and general lifting tasks in an industrial environment. Technical data Span: 5,890 mm Column spacing L: 5,590 mm Column spacing B: 5,890 mm Girder length: 6,390 mm Bottom flange of crane bridge: 4,145 mm Bottom flange of portal girder: 4,567 mm Overall height: 4,905 mm Operating voltage: 400 V / 50 Hz Control voltage: 24 V Classification according to EN 15011: HC2 / S2 Steel construction group: 18/30/30 Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Motor power: 1.50 / 0.37 kW FEM class: 2m / M5 Protection rating: IP55 Weight with 5 m lift: 65 kg Manual trolley Type: SiCO-HF 2000 A Year of manufacture: 2020 Load capacity: 2,000 kg Girder width: 66 - 220 mm Weight: 17 kg Kedpfxozgv U Uo Ak Ajna Equipment Crane bridge Electric chain hoist SIXX8AF Manual trolley SiCO-HF 2000 A Floor control Main disconnect switch Steel column and girder structure Crane test book available Hoisting equipment test book available EC Declaration of Conformity available Assembly and operating manual available Shipping data Longest component: approx. 6.4 m Heaviest component: approx. 300 kg Condition Used System was installed and in operation. Documentation and test records available. Scope of supply VETTER P300 PROFI crane system Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual trolley SiCO-HF 2000 A Column and girder structure Control / operating elements Test books and documentation Accessories according to existing documents and images The machines, tools, and other items visible in the pictures, which are not explicitly described, are not included in the scope of supply. Shipping or freight shipping possible. Subject to changes, errors and prior sale.

Condition: excellent (used), Year of construction: 2020, VETTER P300 PROFI Crane System Manufacturer / Type Manufacturer: Vetter Krantechnik GmbH Type: P300 Year of manufacture: 2020 Design: PROFI crane system as a two-rail gantry with crane bridge Technical data Load capacity: 1,600 kg Crane bridge span: 5,100 mm Support spacing L: 5,570 mm Support spacing B: 5,100 mm Beam length: 5,470 mm Overall dimensions of the system: approx. 6,020 x 5,800 mm Bottom flange of crane bridge: 4,145 mm Bottom flange of gantry beam: 4,567 mm Overall height: 4,905 mm Classification according to EN 15011: HC2 / S2 Steel structure group: 18/30/30 Operating voltage: 400 V / 50 Hz Control voltage: 24 V Max. permissible hoist weight: 85 kg Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Lifting motor power: 1.50 / 0.37 kW FEM class: 2m / M5 Protection class: IP55 Duty cycle: 40 % Weight at 5 m lift: 65 kg Trolley / Running gear Type: SiCO-HF 2000 A Variant A Load capacity: 2,000 kg Beam width: 66 - 220 mm Weight: 17 kg Equipment Two-rail gantry crane system Crane bridge Knsdpjzgrzqofx Ak Asa Electric chain hoist SIXX8AF Manual trolley SiCO-HF Load hook Control / Operating element Main switch Steel supports and beam structure Documentation / Inspection certificate available Accessories as shown in the pictures Areas of application Mechanical engineering Assembly work Production Maintenance Workshop operation Material handling Logistics Weight Total weight of the system is approximately 2,000 to 3,500 kg, depending on experience, depending on the installed steel profiles, foundation plates and equipment variants. Condition Used. System was installed and in operation. Optical condition as shown in the pictures. Inspection certificate and documentation available. Scope of delivery VETTER P300 PROFI Crane System Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual trolley SiCO-HF Support and beam structure Control / Operating elements Documentation / Inspection certificate Accessories as shown in the pictures Subject to changes and errors in the technical data and specifications. Subject to prior sale.

Condition: excellent (used), Year of construction: 2020, VETTER P300 PROFI Crane System Two-rail portal crane with crane bridge and electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: P300 PROFI Crane System Year of manufacture: 2020 Machine type: Two-rail portal crane / workshop crane Description For sale is a used VETTER PROFI crane system, type P300, in a robust two-rail portal design with crane bridge, manual trolley, and electric chain hoist. The system was designed for industrial workshop operation and is ideally suited for assembly, production, mechanical engineering, maintenance, logistics, and material handling. The design complies with the crane classification HC2 / S2 according to EN 15011 and has a load capacity of 1,600 kg. Documentation, test book, and conformity documents are available. Technical data of the crane system Manufacturer: Vetter Krantechnik GmbH Type: P300 Year of manufacture: 2020 Load capacity: 1,600 kg Crane classification: HC2 / S2 according to EN 15011 Operating mode: Workshop crane Control: Floor control Mounting: Composite anchor system Span: 5,100 mm Support spacing L: 5,590 mm Support spacing B: 5,100 mm Overall dimensions of the system: approx. 6,040 x 5,800 mm Beam length: 6,170 mm Bottom flange of crane bridge: 4,145 mm Bottom flange of portal beam: 4,567 mm Overall height: 4,905 mm Operating voltage: 400 V / 50 Hz Control voltage: 24 V Max. permissible hoist weight: 85 kg Steel structure group: 18/36/30 Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Lifting motor power: 1.50 / 0.37 kW Drive group: FEM 2m / M5 Kodpfjzgtzlsx Ak Aona Protection class: IP55 Duty cycle: 40 % Weight at 5 m lift: 65 kg Operating voltage: 400 V 3 PH / 50 Hz Control voltage: 24 V Manual trolley / travelling carriage Type: SiCO-HF 2000 A Design: Manual trolley Beam width: 66 - 220 mm Load capacity: 2,000 kg Self-weight: 17 kg Equipment - Two-rail portal crane system - Crane bridge - Electric chain hoist SIXX8AF - Manual trolley SiCO-HF 2000 A - Load hook - Floor control - Mains connection switch - Steel supports and beam structure - Composite anchor system - Documentation available - Test book available - EC declaration of conformity available Transport data Longest component: approx. 6.2 m Heaviest individual component: approx. 300 kg Total weight of the system, based on experience, approx. 2,000 - 3,500 kg Application areas Mechanical engineering Assembly work Production Maintenance Workshop operation Logistics Material handling Condition Used, functional, dismantled from ongoing operation. Optical condition according to pictures. Test book and technical documentation available. Scope of delivery VETTER P300 PROFI Crane System Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual trolley SiCO-HF 2000 A Support and beam structure Floor control Mains connection switch Test book EC declaration of conformity Documentation Accessories according to pictures (Changes and errors in the technical data are subject to change.) Subject to prior sale.

Condition: used, Electric chain hoist crane DEMAG, type DCM PRO -125 1/1 H2.8 V8/2, Manulift Year of manufacture: 2004 Load capacity: 125 kg Hook travel: 2.8 meters Lifting speed: 8 m/min Knodozugnuepfx Ak Aoa Fine lifting speed: 2 m/min Distance from suspension to load hook: 630 mm Power supply: 400 volts, 50 Hz 1 load chain = 125 kg Manulift hand control directly on the crane hook Weight: 21 kg Good condition

Condition: excellent (used), CATALOG NUMBER 7678 TECHNICAL DATA - Guide bar length: 1670 mm - Cutting length: 1500 mm - Automatic lubrication of the cutting system - Damping and tensioning system in the head - Manual feed of the guide bar - Electric motor: 7.5 kW - Transport dimensions (L/W/H): 1650x900x2350 mm - Total weight: 240 kg ADVANTAGES Knjdpfxozulkzj Ak Aja – Austrian manufacturing – Suitable for cross-cutting packs or round timber – Unpainted – Mobile, on wheels – Used saw, very good condition Net price: 25,900 PLN Net price: 6,160 EUR depending on an exchange rate of 4.2 EUR (Prices may change with greater fluctuations)

Condition: used, Bundle or log saw Kjdsztk Dwepfx Ak Ajna Guide 150cm 6.3 kW-9 HP motor 380V Chain lubrication Chain in average condition (several teeth missing)

Condition: used, Haffner SL100 door lock milling machine for simultaneously: Kjdpfsztvw Nsx Ak Asna Milling out the lock case using a chain cutter Milling out the lock faceplate using a faceplate cutter Drilling out the handle and keyhole using a drill bit. Technical data: - Chain cutter motor: 1.7 kW - Rebating cutter motor: 0.6 kW - Drill motor: 0.25 kW - Blade length: 150 mm - Chain width: 12–17 mm

Condition: used, Year of construction: 2014, operating hours: 5,500 h, Liebherr R924 LC Compact Litronic/Hydraulic Excavator Operating hours: 5500 h Weight: 26300 kg Engine manufacturer: Liebherr, short-tail swing Engine power: 120 kW Air conditioning Engine type: D934S Kjdszv A Slopfx Ak Aena Top machine? * Sales consultant information * + * An appointment is required for a test drive or inspection. * + * Trade-in and financing options are available. * Errors in the information cannot be ruled out. * Please verify the equipment on the vehicle. Subject to errors, typos, and prior sale.

Condition: good (used), Year of construction: 1985, Electric chain hoist, crane, overhead crane, assembly crane, manual trolley, trolley, trolley drive, crane drive, crane travel, trolley -Manufacturer: Steel, electric chain hoist with chassis -Chain hoist: Type T 302 L, load capacity 500 kg -Main stroke: 4 m/min -Fine stroke: 1 m/min -Hook path: 5 m -Crane chassis: Maximum beam width 135 mm -Dimensions: see photo and technical drawing -Transport dimensions: 600/550/H420 mm -Weight: 49 kg Kedpfx Aoya Aiyek Aena

Condition: good (used), Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Quantity: 30x chain hoists Knjdpfx Akeb A Rkho Asa -various manufacturers: Yale, Brand, BKS -Load capacity: from 750-3200 kg -Chain length 1.0-2.5 m -Price/Sale: complete -mostly functional -Dimensions: 1200/800/H600 mm -Weight including packaging: 600 kg

Condition: used, Year of construction: 1968, Unit can be swiveled. Unit can be moved left and right via handwheel. Maximum milling depth: 150 mm - 180 mm. Slot length: approx. 250 mm. Weight: approx. 320 kg. Storage location: Nattheim. Ksdpjzkl T Ujfx Ak Asna

Condition: used, Year of construction: 2017, operating hours: 4,921 h, Equipment: all wheel drive, Komatsu PC490LC-10 - Year of manufacture: 2017 - 270 kW - Weight: 47,410 kg - Camera - LED work lights - Cabin rockfall protection grid - Central lubrication system - Radio - An additional/standard arm will be supplied and is included with the excavator. Subject to errors and prior sale. Internal vehicle number: 10220 WhatsApp support available! If you have questions about the machine or need further information, feel free to contact us conveniently by WhatsApp. Kjdpfxsvc Tftj Ak Ajna WhatsApp WhatsApp

Condition: used, Festo PP-type chain cutter or chain milling machine with pneumatic feed for milling out lock cases or other fittings. Technical data: - Motor: 1.6 kW Knodpfxjzryruo Ak Aea - Guide bar length: 150 mm - Chain width: 7–8 mm

Condition: used, Bäuerle chain cutter / chain mortiser for cutting out lock cases or other fittings, with a swivelling table and swivelling cutting unit. Kjdpozryp Hjfx Ak Asna Technical data: - Blade: 40 x 150 mm - Chain width approx.: 18–15 mm - Motor: 1.6 kW

Condition: used, Fezer KF 50 chain mortiser or chain cutter for cutting mortises for tenons. Knodpfszrypyox Ak Aea Technical data: - Blade: 40 x 175 mm - Technical specifications: see PDF

Condition: like new (used), Year of construction: 2018, machine/vehicle number: DN2383 / 2368, 1 Schmalz Column Swivel Crane 2 cranes available! Height 4.8m, length 3m, upper carriage boom 4m, hook height 3.6m Load capacity at full extension 350 kg Total weight approx. 500 kg including anchor plate 75x75 cm with 500 kg Schmalz chain hoist with floor control (with 2 lifting speeds) Connection to 400V 16A, swivel range approx. 270° Crane is disassembled and packed on a pallet Very good condition, almost new. See pictures Kodpfszvuldjx Ak Asna Item location is 75053 Gondelsheim Shipping by freight forwarder or collection by appointment