Used Precision Rotary Table for sale (52,204)

Condition: new, table diameter 340 mm table load 290 horizontal kg table load capacity 190 vertikal kg turning speeds 0,6 - 6,0 U/min spindle bore 60,0 mm swivelling range 0 - 90 Grad weight of the machine ca. 62 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Fgodpfxjxaafqo Ah Uei Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Condition: ready for operation (used), Year of construction: 1975, functionality: fully functional, machine/vehicle number: 752588, grinding length: 2,000 mm, grinding width: 500 mm, overall weight: 12,000 kg, disc diameter: 700 mm, with magnetic clamping plate 2000x700mm due to insolvency Fsdpfx Asxlaa Ejh Uogi

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, rotational speed (max.): 12,000 rpm, spindle nose: BT 40, number of slots in tool magazine: 24, WORK AREA: Fodpfx Ajxiv T Aeh Usgi Longitudinal X: 1.270 mm Transverse Y: 508 mm Vertical Z: 635 mm Distance between spindle nose and table: 102-737 mm TABLE: Dimensions: 1.321 x 457 mm Maximum weight on table: 1.588 kg T-slot width: 16 mm T-slot center distance: 80 mm SPINDLE: Spindle connection taper: BT 40 Rotation speed: 12.000 rpm TOOL CHANGE: Magazine capacity: 24 Tool taper: BT 40 Machine complete with: • High pressure through the spindle • Remote electronic handwheel

Condition: new, table diameter 300 mm table load 50 Kg swivelling range 90 Grad turning speeds 1 - 12 stufenlos U/min Fsdpfx Asfv Azteh Ujgi table load capacity 50 kg vertikal total power requirement 0,22 kW weight of the machine ca. 0,036 t dimensions of the machine ca. 0,45 x 0,43 x 0,38 m

Condition: new, table load 1000 kg table diameter 900 mm turning speeds 0,12 - 1,2 U/min swivelling range 0 - 135 Grad speed Kipp 0,35 U/min welding current 500 A dimensions of the machine ca. 1475 x 1050 x 900 mm For heavy industry When choosing a turntable, it is essential Turning and tilting torque must be taken into account. To note applies to how far the center of gravity of the workpiece is from the The faceplate is away or how far the center of gravity is is eccentric from the center. By means of a Rotary and tilting tables can be used to optimize workpieces position for welding. - Robust construction. - Infinitely variable. Fgjdpsxaac Ajfx Ah Uei - Hand remote control. - HF protected. Furnishing : - 1 control (integrated) - 1 wired remote control

Condition: new, table length 400 mm table width 400 mm table load 0,2 t table diameter 400 mm swivelling range 90 Grad Fodpofv Azzefx Ah Uogi turning speeds 0,2 - 2 stufenlos U/min table load capacity 100 kg. vertikal total power requirement 220 kW weight of the machine ca. 0,065 t dimensions of the machine ca. 0,56 x 0,42 x 0,46 m

Condition: as good as new (ex-display), Year of construction: 2024, weight max. in kg max. 1000 kg turning speeds 0,18 - 0,58 U/min height 976 - 1436 mm inclination 0 - 115 ° table diameter 895 mm voltage 380 V total power requirement 2,0 kW weight 685 kg range L-W-H 2414 x 920 x 1436 mm Exhibition machine from 2024 with only approx. 2x operating hours Condition NEW!! Special price on request Fgodpfxsw U U R Ee Ah Uei The AK BEND SRH hydraulic welding positioner is ideal for welding, assembly and maintenance work. Positioning is done via a hydraulic rotation and tilting function. Description: - electro-hydraulic turning and tilting function - Fast handling of workpieces - Maximum productivity thanks to optimal working position - Lifting, tilting and turning workpieces in one clamping - Low idle times thanks to turning components - Maximum work performance thanks to comfortable working - Back-friendly working for the user Equipment: - Continuously variable speed adjustment - Freely movable foot switch - Hand-held remote control with 5 meter cable - Freely movable control panel with digital speed display - Analogue angle display * Manufacturer video (identical rotary table): ?v=Vayw8Ny64nc

Condition: new, table diameter 450 mm table load 300 Kg swivelling range 90 Grad turning speeds 0,2 - 2 stufenlos U/min table load capacity 300 kg vertikal total power requirement 220 kW weight of the machine ca. 0,078 t Fjdoupxa Sopfx Ah Uogi dimensions of the machine ca. 0,66 x 0,45 x 0,48 m

Condition: new, table diameter 1500 mm table load 5000 Kg swivelling range 0 - 130 Grad turning speeds 0,05 - 0,5 U/min height adjustment 1300 - 2050 mm max. torque on the faceplate 10000 Nm engine output 1,5 / 1,5 kW Fgjdpfxefv Ay Do Ah Uoi welding current 1000 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch.

Condition: new, table diameter 2000 mm table load 10000 Kg swivelling range 0 - 130 Grad turning speeds 0,02 - 0,2 U/min height adjustment 1450 - 2200 mm max. torque on the faceplate 20000 Nm engine output 1,5 / 2,0 kW welding current 1000 Ampere Fgodpefv Ay Ijfx Ah Uei - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch.

Condition: new, table diameter 330 mm table load 220 Kg swivelling range 135 Grad tilt adjustment: manually/mechanicall manuell turning speeds max. 5 U/min stufenlos table load capacity 100 kg. vertikal total power requirement 0,125 kW weight of the machine ca. 48 Kg Fgedpjh D Svcefx Ah Uji dimensions of the machine ca. 640 x 440 x 630 m

Condition: new, table diameter 1300 mm table load 3000 Kg swivelling range 0 - 130 Grad turning speeds 0,05 - 0,5 U/min height adjustment 1200 - 1800 mm max. torque on the faceplate 6000 Nm engine output 1,1 / 1,1 kW welding current 700 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. Fodpfx Aofv Ayyeh Usgi The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere.

Condition: new, table load 500 Kg table load capacity 250 kg. vertikal table diameter 550 mm swivelling range 135 (-45 - +90) Grad turning speeds 0 - 5 stufenlos U/min Fgjdpfxoulbbwo Ah Uoi connected load frequency 230 V total power requirement 0,8 KW weight of the machine ca. 0,255 t dimensions of the machine ca. 0,82 x 0,73 x 0,71 m Welding turntable with - large passage 165mm - Footswitch - tilt by motor - Speed infinitely adjustable - 250 amp welding current transmission Demonstration machine documentation only in English.

Condition: new, table diameter 330 mm table load 350 Kg swivelling range 135 Grad tilt adjustment: manually/mechanicall manuell turning speeds max. 5 U/min stufenlos Fgsdpeh D Svgsfx Ah Uei table load capacity 120 kg. vertikal total power requirement 0,125 kW weight of the machine ca. 52 Kg dimensions of the machine ca. 640 x 490 x 630 m

Condition: new, table diameter 1000 mm table load 1200 Kg swivelling range 0 - 135 Grad turning speeds 0,1 - 1,0 U/min height adjustment 1000 - 1450 mm max. torque on the faceplate 2000 Nm engine output 0,75 / 0,55 kW welding current 500 Ampere Fedpefv Ayrjfx Ah Ujgi - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere.

Condition: new, table diameter 1100 mm table load 2000 Kg swivelling range 0 - 135 Grad turning speeds 0,1 - 1,0 U/min height adjustment 1100 - 1550 mm max. torque on the faceplate 4000 Nm engine output 1,1 / 0,75 kW welding current 500 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. Fjdpfx Aofv Ayveh Uegi - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere.

Condition: new, table diameter 350 mm Fsdpfx Asupw Nxjh Ujgi table load 100 Kg swivelling range 90 Grad turning speeds 0,2 - 2 stufenlos U/min table load capacity 50 kg. vertikal total power requirement 220 kW weight of the machine ca. 0,055 t dimensions of the machine ca. 0,46 x 0,4 x 0,42 m

Condition: new, table load 110 Kg table load capacity 55 kg. vertikal table diameter 250 mm hollow spindle diameter 65 mm chucking diameter 200 mm swivelling range Grad turning speeds 0 - 8 stufenlos U/min total power requirement 0,15 KW weight of the machine ca. 65 Kg dimensions of the machine ca. 0,5 x 0,53 x 0,6 m Welding turntable with - large passage mm - Footswitch Fsdpfsulbc Ujx Ah Ujgi - tilt/swivel by hand - Speed infinitely adjustable - 250 amp welding current transmission - Bore in faceplate mm. Demonstration machine documentation only in English.

Condition: new, table diameter 550 mm table load 500 Kg swivelling range 135 Grad tilt adjustment: manually/mechanicall motorisch turning speeds max. 5 U/min stufenlos table load capacity 250 kg. vertikal total power requirement 0,8 kW weight of the machine ca. 245 Kg Fgedpfxeh D Svkj Ah Uei dimensions of the machine ca. 820 x 730 x 710 m

Condition: new, table diameter 690 mm table load 0,5/0,25 t swivelling range 0 - 90 motorisch Grad turning speeds 0,2 - 2,5 U/min spindle bore 100 mm Torque 375 Nm welding current 500 Ampere connected load frequency 230 Volt weight 290 kg Dimensions (LxWxH) 800 x 750 x 750 mm Welding turntable with - Footswitch - tilt motor - Speed continuously adjustable - 500 amps welding current transmission Fodpfofv Aykex Ah Uegi

Condition: new, table diameter 800 mm table load 600 Kg swivelling range 0 - 135 Grad turning speeds 0,1 - 2,0 U/min height adjustment 850 - 1300 mm max. torque on the faceplate 900 Nm engine output 0,37 / 0,37 kW welding current 500 Ampere Fgedpfxsfv Ayne Ah Usi - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere.

Condition: new, table diameter 2500 mm table load 20,0 t swivelling range 0 - 135 Grad turning speeds 0,04 - 0,4 U/min max. torque on the faceplate 40000 Nm table pass 200 mm welding current 1000 Ampere total power requirement 5,5 + 11,0 kW weight of the machine ca. t Fgjdefv Axmjpfx Ah Usi ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: new, table diameter 560 mm table load 0,3 t swivelling range 0 - 90 Grad turning speeds 0,25 - 4,0 U/min 360 Nm welding current 500 Ampere total power requirement 0,4 / Hand kW • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. Fjdpfx Ahjfv Axqe Uegi • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.

Condition: new, Table dimensions 800 x 800 mm table load 1500 Kg swivelling range 0 - 105 Grad turning speeds 0,15 - 1 U/min height adjustment 672 - 1180 mm hollow spindle diameter mm welding current 500 Ampere max. torque on the faceplate 3000 Nm total power requirement 0,75 kW dimensions of the machine ca. 1560x1120x750 m Characteristics: • Made in EU • Self-locking gear, therefore no leading and trailing at eccentric load • Hydraulic height adjustment allows almost limitless positioning • Electronic quality components from Schneider / Siemens / Delta • Frequency-controlled stepless speed of the turntable Fsdpfx Ahjfv Azps Usgi • High stability through a heavy and compact design • CE certificate • Very good value for money • Standard version comes with remote control and dual foot pedal • 3 years warranty (see warranty conditions) • Hydraulically height adjustable with locking system (for fall protection)

Condition: new, table diameter 350 mm table load 100 / 50 Kg swivelling range 0 - 90 Grad tilt adjustment: manually/mechanicall manuell Fgedpfxjg Rk Dlo Ah Uei turning speeds 0,5 - 5,0 U/min spindle bore 30 mm Torque 150 Nm welding current 500 Ampere connected load frequency 230 Volt Welding turntable with hollow shaft 100kg capacity With through hole rotation and tilt axis Infinitely variable speed Compact model Incl. foot pedal