Used Preservation Facility for sale (3,209)

Condition: used, Year of construction: 2015, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: 6193, type of input current: three-phase, Complete recycling plant available for sale, comprising a Lindner Micromat 2000 industrial shredder together with Godswill baling equipment, conveyors, control systems and associated plant. This is a substantial industrial recycling setup, previously used for processing waste paper/cardboard and producing compact, baled material. The plant is being offered as a complete package and represents an excellent opportunity for a recycling operator looking to acquire a ready-made processing system. Main equipment includes: * Lindner Micromat 2000 industrial shredder * Manufactured in 2015 * Machine No. 6193 * Motor power 132 kW * 400V / 50Hz * Manufactured in Austria * Godswill GB-1108F baling press * Manufactured 2009 * Series No. 982472 * 40 HP * 415V / 50Hz * 72A * Additional Godswill paper machinery/baling equipment, with a machine rated at approximately 80 HP * Hydraulic systems and associated equipment * Feed and discharge conveyors * Electrical control panels and operator controls * Safety/emergency-stop systems * Material handling and associated ducting/extraction equipment * Complete interconnected plant infrastructure as shown in photographs The machinery has all paperwork from new and installation. Low hours. All services completed and Documented. Gkedpfx Alez Eh Ihj Ujc Ideal for: Waste paper and cardboard recycling • Material recovery facilities • Recycling companies • Waste processing operations • Industrial baling and shredding applications Sold as a complete plant/package.

Condition: new, Year of construction: 2026, functionality: fully functional, fuel type: electric, drive type: Elektro, Industrial vacuum cleaner Condition: New Technical condition: New Gkjdpfxez Hrr Ts Al Uoc Description: New unit for vacuuming hot ash, chimney sweep vacuum cleaner.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 5,450 h, load capacity: 4,500 kg, lifting height: 6,000 mm, free lift: 1,900 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 2,750 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 1,360 mm, fork length: 1,400 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200 / 50 - 10, rear tire type: cushion tires (black), rear tire size: 27 X 10 - 12, overall weight: 11,100 kg, empty load weight: 6,600 kg, total height: 2,450 mm, total length: 2,600 mm, total width: 2,400 mm, color: green, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, air conditioning, all wheel drive, cabin, centralized greasing system, front guard, hydraulic fork positioner, lighting, pallet forks, sideshift, COMBILIFT C4500 | DIESEL | TRIPLEX 6000 MM | FREE LIFT | FULL CABIN | HEATING + AIR CONDITIONING | FORK POSITIONER | READY TO WORK Gedpfxsz Iru Ro Al Ujkc 🔧 FULLY SERVICED | WARRANTY | WORLDWIDE DELIVERY If you are looking for a forklift that can start generating value from day one, instead of incurring unexpected service costs, this machine is an excellent choice. We offer a fully prepared COMBILIFT C4500 multidirectional forklift, professionally inspected, serviced, and tested. The machine is ready for immediate operation in a production facility, warehouse, timber yard, steel service center, or logistics operation. ⭐ KEY BENEFITS ✔ Full service completed before sale ✔ Start-up warranty ✔ Brand-new superelastic tires ✔ Very good technical and visual condition ✔ Ready to work without additional investment ✔ Live online video inspection available ✔ Direct delivery to your company 📋 TECHNICAL SPECIFICATION Manufacturer: COMBILIFT Model: C4500 Year: 2018 Capacity: 4500 kg Engine: DIESEL Operating hours: 5450 h Mast: TRIPLEX Lifting height: 6000 mm Free lift: 1900 mm Fork positioner: 1360 mm Fork length: 1400 mm Cabin: Full enclosed and heated Air conditioning: YES Machine weight: 6600 kg 📐 DIMENSIONS Height: 2450 mm including air conditioning Length: 2600 mm Width: 2400 mm Mast closed height: 2750 mm 🛞 TIRES Front: 200 x 50 - 10 Rear: 27 x 10 - 12 Condition: 100% BRAND NEW ⚙️ EQUIPMENT ✔ Hydraulic fork positioner ✔ Full enclosed heated cabin ✔ Air conditioning ✔ Full free lift ✔ Working lights 🏭 IDEAL FOR ✔ Timber and wood processing ✔ Steel mills and steel service centers ✔ Steel structure manufacturers ✔ Pipes, profiles, and long materials ✔ Indoor and outdoor operations 🌍 WHY FT LOGISTICS? FT LOGISTICS specializes in forklifts, sideloaders, multidirectional forklifts, and professional material handling equipment. Every machine undergoes a comprehensive technical inspection, servicing, and operational testing before delivery. We have more than 100 machines available in stock and supply equipment throughout Europe, as well as South America, Africa, Asia, and the Middle East. 🤝 WE PROVIDE ✔ Full service before sale ✔ Warranty ✔ Professional technical advice ✔ Leasing and financing ✔ International transport ✔ Export and customs documentation ✔ After-sales support Hundreds of customers across Europe have trusted our machines and return to us for further purchases. 📹 We can arrange a live online presentation, provide additional photos and videos, and prepare an individual transport quotation directly to your company. FT LOGISTICS WE DELIVER MACHINES READY TO WORK.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 6,663 h, load capacity: 6,000 kg, lifting height: 4,550 mm, free lift: 1,950 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 3,250 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 1,550 mm, fork length: 1,500 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 27X10-12, rear tire type: cushion tires (black), rear tire size: 400/60-15, overall weight: 16,400 kg, empty load weight: 10,400 kg, total height: 2,600 mm, total length: 4,300 mm, total width: 2,300 mm, color: red, Equipment: CE marking, all wheel drive, cabin, head guard, lighting, pallet forks, sideshift, ## 🚜 COMBILIFT C6000SL | DIESEL | 4550 MM DUPLEX MAST | FREE LIFT | FORK POSITIONER | FULLY ENCLOSED HEATED CAB | READY FOR WORK ### ✅ FULLY SERVICED | WARRANTY | WORLDWIDE DELIVERY 🌍 If you are looking for a forklift that delivers value from day one, rather than incurring unexpected maintenance costs, this machine is the perfect choice. We offer a reliable and fully prepared COMBILIFT C6000SL multidirectional sideloader, professionally inspected, fully serviced, thoroughly tested, and ready for immediate operation in production facilities, warehouses, steel service centers, and logistics operations. --- ## ⭐ Key Advantages ✅ Fully serviced before sale ✅ Warranty included ✅ Brand-new super elastic tires Gksdjz Irw Eepfx Al Ujc ✅ Excellent technical and cosmetic condition ✅ Ready for immediate operation – no additional investment required ✅ Live online machine demonstration available ✅ Direct delivery to your facility available --- # ⚙️ Technical Specifications 🏭 Manufacturer: COMBILIFT 📌 Model: C6000SL 📅 Year of Manufacture: 2012 🏋️ Load Capacity: 6,000 kg 🔧 Engine: Kubota Diesel ⏱ Operating Hours: 6,663 h 📏 Mast: Duplex ⬆️ Lift Height: 4,550 mm ↕️ Free Lift: 1,950 mm 📐 Fork Positioner: 1,550 mm 🔩 Fork Length: 1,500 mm 🚪 Cab: Fully enclosed, heated ⚖️ Service Weight: 10,400 kg ### 📐 Dimensions • Height: 2,600 mm • Length: 4,300 mm • Width: 2,300 mm • Lowered Mast Height: 3,250 mm ### 🛞 Tires Front: 27×10-12 Rear: 400/60-15 Condition: ✅ 100% New --- # 🔧 Equipment ✔️ Fork Positioner ✔️ Free Lift ✔️ Fully Enclosed Heated Cab ✔️ Working Lights --- # 🏭 Ideal For 🌲 Timber Industry 🏗 Steel Mills & Steel Service Centers 🏭 Structural Steel Manufacturers 📦 Handling Pipes, Profiles & Long Loads 🏢 Indoor & Outdoor Applications --- # 🤝 Why Choose FT LOGISTICS? When purchasing from FT LOGISTICS, you are buying from a company specializing exclusively in forklifts, sideloaders, multidirectional forklifts, and warehouse handling equipment. Every machine undergoes a comprehensive technical inspection, full servicing, and operational testing before delivery. We maintain an inventory of over 100 machines available for immediate delivery and supply customers throughout Europe, South America, Africa, Asia, and the Middle East. ### ✅ We Provide ✔️ Full pre-delivery service ✔️ Warranty ✔️ Professional technical support ✔️ Leasing & financing solutions ✔️ Worldwide transport organization ✔️ Export documentation & customs assistance ✔️ Comprehensive after-sales support --- 🌍 Hundreds of customers across Europe and worldwide trust our equipment and continue to choose FT LOGISTICS for their material handling needs. 📹 We can arrange a live online demonstration, provide additional photos and videos, and prepare a tailored transport quotation for delivery to your facility. 📩 Contact us today for more information or a personalized offer. --- # FT LOGISTICS ### 🚜 Ready-to-Work Material Handling Equipment ### 🌍 Delivered Worldwide

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 10,649 h, load capacity: 7,000 kg, lifting height: 5,000 mm, free lift: 1,250 mm, load center: 700 mm, fuel type: diesel, mast type: duplex, construction height: 3,750 mm, motor manufacturer: PERKINS, fork carriage width: 1,500 mm, fork length: 1,400 mm, fork width: 200 mm, fork thickness: 70 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 10.00-20 SE, rear tire type: superelastic tires (black), rear tire size: 10.00-20 SE, overall weight: 19,400 kg, empty load weight: 12,400 kg, total height: 3,400 mm, total length: 5,000 mm, total width: 2,300 mm, color: yellow, Equipment: cabin, lighting, pallet forks, 🚜 USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 📌 Years of experience | 🛠️ In-house service & paint shop | 💼 Professional consultancy | 🚚 Own transport | 🤝 After-sales support Looking for a forklift you can truly depend on? We are an established dealer of new and used forklifts with a longstanding tradition. We serve clients throughout Europe – from small companies to major international industrial facilities. Our forklifts are more than just machines – they are a guarantee that your logistics will operate smoothly and reliably. ⭐ What sets us apart? ✅ Every forklift undergoes a thorough technical inspection (servicing, testing, filter and oil replacement, refurbishment of main components) ✅ Full safety inspection (UDT) available on request ✅ In-house paint and service workshop – machines perfected aesthetically and technically ✅ Europe-wide transport – performed with our own fleet and trained drivers ✅ Operator training at delivery + practical on-site demonstration ✅ After-sales service & technical support – support continues after the sale ✅ Possibility to visit & test the machine at our premises – you are welcome! ✅ Hundreds of satisfied customers across Europe – join those who already trust us ✅ Financing assistance – we cooperate with most leasing companies ✅ Invoice in EUR or PLN – as per customer preference 🔹 Current Offer: BAUMANN GS 70/14/50 – 7 T Side Loader 📅 Year of manufacture: 2007 ⏱️ Operating hours: 10,649 h ⚡ Power: Diesel 🏋️ Capacity: 7,000 kg – load centre 700 mm 🗜️ Mast: Duplex – 5000 mm 🔧 Forks: 1200 mm 🛞 Superelastic tyres: 100% condition 🛠️ Technical condition: Excellent – after full service ✨ Visual condition: Well-maintained, rust-free, ready for work 📏 Free lift: 1250 mm Dimensions: 📐 Truck height: 3400 mm 📐 Total length: 5000 mm Gedpfx Aloz Ir D Ee Uekc 📐 Width: 2300 mm 📐 Fork positioner width: 1500 mm 📐 Overall height: 3750 mm 🏭 Ideal applications: Warehouses with narrow aisles Wood, steel, and pipe industries Handling of long goods Both indoor and outdoor operations

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 6,258 h, load capacity: 2,000 kg, lifting height: 8,050 mm, free lift: 2,835 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 3,750 mm, motor manufacturer: ELECTRIC, gearing type: converter, battery capacity: 930 Ah, remaining battery capacity: 82 %, battery voltage: 48 V, battery weight: 1,320 kg, fork carriage width: 920 mm, fork length: 1,150 mm, fork width: 100 mm, fork thickness: 40 mm, tire condition: 100 %, front tire type: superelastic tires (non-marking), front tire size: 413 X 178 X 285,8, rear tire type: superelastic tires (non-marking), rear tire size: 16 X 9 X 12 1/8, overall weight: 9,500 kg, empty load weight: 7,500 kg, total height: 2,250 mm, total length: 2,750 mm, total width: 1,400 mm, color: yellow, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, fork extension, front guard, head guard, lighting, pallet forks, sideshift, 🏗️ AISLE MASTER 20WHE | ELECTRIC | 2000 KG | TRIPLEX 8050 MM | FREE LIFT 2835 MM | SIDESHIFT | 48V 930AH BATTERY >80% | CHARGER INCLUDED ⚡ ARTICULATED FORKLIFT FOR VERY NARROW AISLES | FULL SERVICE | WARRANTY | READY TO WORK | WORLDWIDE DELIVERY 🌍 We offer a 2018 AISLE MASTER 20WHE electric articulated forklift, designed for very narrow aisles and high-bay warehouses. Its articulated design provides excellent maneuverability between racking and allows significantly narrower working aisles compared with conventional counterbalance forklifts. With an overall width of only 1400 mm and a lifting height of 8050 mm, it enables maximum use of warehouse space, both horizontally and vertically. ⚙️ TECHNICAL SPECIFICATION • Manufacturer: AISLE MASTER • Model: 20WHE • Type: Articulated / Very Narrow Aisle Forklift • Year: 05/2018 • Serial number: 39882 • Power: Electric • Operating hours: 6258 h • Lifting capacity: 2000 kg • Machine weight: 7500 kg • Mast: TRIPLEX • Lifting height: 8050 mm • Free lift: 2835 mm • Forklift height: 2250 mm • Closed mast height: 3750 mm Gkodpfx Aoz Itgnjl Ujc • Overall length: 2750 mm • Overall width: 1400 mm • Carriage width: 920 mm • Forks: 1150 × 100 × 40 mm • Hydraulic sideshift: YES • Fork positioner: NO • Cabin: Open • Platform: None 🔋 BATTERY & CHARGER The forklift is equipped with a heavy-duty 48 V / 930 Ah traction battery weighing approximately 1320 kg. The battery is fully operational, professionally reconditioned, and has a tested capacity of over 80%. 💰 THE PRICE INCLUDES THE COMPLETE SET: • AISLE MASTER 20WHE forklift • Reconditioned 48 V / 930 Ah battery – capacity >80% • Three-phase battery charger The machine is therefore supplied as a complete, ready-to-use package with no need to purchase a separate battery or charger. 🛞 TIRES • Front: Superelastic 413 × 178 × 255.8 – approx. 100% • Rear: Superelastic 406 × 95 × 12 – approx. 100% 🛠️ EQUIPMENT • TRIPLEX mast • Hydraulic sideshift • Full free lift • Work lights • Warning beacon • Oscillating axle • Superelastic tires • Open operator cabin • Reconditioned traction battery • Three-phase charger 🔧 PROFESSIONALLY PREPARED FOR WORK Before sale, the forklift undergoes a comprehensive inspection in our own service center. We check the electric drive, battery, hydraulics, mast, chains, rollers, articulated mechanism, steering, brakes, and all operating functions. The machine also undergoes a load test and is prepared for immediate professional operation. 🏭 APPLICATION Ideal for very narrow aisle and high-bay warehouses, logistics and distribution centers, production facilities, and pallet storage. The articulated design allows maximum use of available warehouse capacity while maintaining excellent maneuverability. 🌍 TRANSPORT & SALES We organize professional transport throughout Europe and worldwide, including direct delivery, export documentation, and assistance with international transport formalities. ✅ FULL SERVICE & INSPECTION | 🔋 BATTERY >80% | 🔌 3-PHASE CHARGER INCLUDED | 🛡️ WARRANTY | 🌍 WORLDWIDE DELIVERY | READY TO WORK

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 3,729 h, load capacity: 14,000 kg, lifting height: 3,550 mm, free lift: 1,730 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,100 mm, motor manufacturer: GM, gearing type: hydrostat, fork carriage width: 2,050 mm, fork length: 1,500 mm, fork width: 250 mm, fork thickness: 60 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 400/60-15, rear tire type: cushion tires (black), rear tire size: 465/55-20, overall weight: 29,250 kg, empty load weight: 15,250 kg, total height: 3,000 mm, total length: 3,000 mm, total width: 3,300 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, 🚜 COMBILIFT C14000 | LPG | 3550 MM | HYDRAULIC FORK POSITIONER | FULL CABIN | READY FOR WORK ✅ FULLY SERVICED MACHINE ✅ WARRANTY INCLUDED 🌍 WORLDWIDE DELIVERY AVAILABLE If you are looking for a forklift that will generate value from day one instead of incurring maintenance costs, this machine is the perfect solution. We offer a modern and fully prepared COMBILIFT C14000 multidirectional forklift. The machine has been professionally serviced, thoroughly inspected, and extensively tested to ensure maximum reliability and performance. It is ready for immediate operation in warehouses, production facilities, timber yards, steel service centers, and demanding logistics environments. ⭐ KEY BENEFITS ✅ Fully serviced prior to sale ✅ Start-up warranty included ✅ Excellent technical and cosmetic condition ✅ Low operating hours – only 3,729 h ✅ Ready for immediate operation with no additional investment required ✅ Live online demonstration available ✅ Direct delivery to your facility available 🔧 TECHNICAL DATA 🏭 Manufacturer: COMBILIFT Gsdpfxjz Il Iwo Al Ujkc 📌 Model: C14000 📅 Year of Manufacture: 2019 🏋️ Capacity: 14,000 kg 📍 Load Centre: 600 mm ⛽ Engine: Kubota LPG 🕒 Operating Hours: 3,729 h ⬆️ Lift Height: 3,550 mm ⚖️ Machine Weight: 15,250 kg 📐 DIMENSIONS 📏 Overall Height: 3,000 mm 📏 Construction Height: 3,100 mm 📏 Overall Length: 3,000 mm 📏 Overall Width: 3,300 mm ↔️ Fork Positioner Width: 2,050 mm 🔩 FORKS 📏 Fork Length: 1,500 mm 📐 Fork Section: 250 x 60 mm 🛞 TYRES Front: 400/60-15 Rear: 465/55-20 ⚙️ EQUIPMENT ✅ Fully enclosed cabin ✅ Heating system ✅ Radio ✅ Hydraulic fork positioner ✅ Working lights ✅ Kubota LPG engine ✅ Multidirectional steering system ✅ Operator comfort package 🏭 IDEAL FOR 🌲 Timber and wood processing industry 🪑 Furniture manufacturers 🏗️ Steel mills and steel service centers 🔩 Aluminium and PVC profile handling 📦 Long-load transportation and storage 🚧 Narrow aisle operations 🏢 Indoor and outdoor applications 🤝 WHY CHOOSE FT LOGISTICS? When purchasing from FT LOGISTICS, you are partnering with a company specializing exclusively in sideloaders, multidirectional forklifts, and professional material handling equipment. 🔍 Every machine undergoes a comprehensive technical inspection, full servicing, and operational testing before delivery. 🌍 With more than 100 machines available from stock, we supply customers throughout Europe, South America, Africa, Asia, and the Middle East. 🎯 WE PROVIDE ✅ Full service before delivery ✅ Warranty coverage ✅ Professional technical support ✅ Leasing and financing assistance ✅ Transport organization ✅ Export documentation and customs support ✅ After-sales service 🏆 Hundreds of customers across Europe trust our equipment and continue to return for future purchases. 📞 CONTACT FT LOGISTICS Sp. z o.o. 🎥 We can arrange a live online demonstration, provide additional photos and videos, and prepare a customized transport quotation directly to your location. FT LOGISTICS 🚜 We Deliver Machines Ready for Work.

Condition: used, functionality: fully functional, Fully automatic robotic grinding system ROBOTICOM SANDROB with vacuum tables For sale is a used ROBOTICOM SANDROB robotic grinding system with ABB industrial robots and associated vacuum tables. The system was recently dismantled from an existing production facility and is now ready for resale. The system is designed for automated surface finishing. The vacuum tables allow for the fixing of workpieces during the grinding process. Workpiece-specific fixtures support the processing of shaped parts and complex contours. Equipment and features: - ROBOTICOM SANDROB grinding robot system with ABB industrial robots - Vacuum tables with workpiece fixtures and vacuum components - Tool storage and change stations, as shown in the pictures - Existing hose packages and extraction connections - For automated, repeatable grinding processes after appropriate setup and programming Condition: Used, recently dismantled. The pictures show the robots and associated system components. The exact scope of delivery will be specified in the offer. An interesting solution for companies looking to automate their grinding processes or expand existing manufacturing capacity. Gjdpfx Aljz Ih Exs Uskc Price on request. If you are interested, please contact us for further information and to arrange a viewing.

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: 25787, rotational speed (max.): 1,500 rpm, inlet: 400 mm, input voltage: 380 V, extraction nozzle diameter: 400 mm, input frequency: 50 Hz, input current: 12 A, Description For sale is a robust industrial extraction fan / chip extraction fan from a stationary extraction system of a wood processing production facility. The fan was in regular operation until recently. Before the sale, a test run was performed: the fan starts reliably and runs smoothly for its age. The commissioning was documented on video; the video can be sent to serious potential buyers upon request. The scope of delivery also includes the existing control cabinet of the extraction system, including the fan control. The control cabinet is complete. The labeling indicates that the control originally controlled other functions of the filter system in addition to the fan (including vibrator and discharge). Technical data - fan / motor Motor manufacturer: Rüetschi & Co. AG, electric motors, CH-5040 Schöftland Motor type: KMER 160 M-4 Motor no.: 25787 Power: 11.0 kW / 15 hp Motor voltage according to nameplate: 380 / 660 V Current according to motor nameplate: 23.0 / 13.0 A Gksdpfxsz Ikxzo Al Usc Frequency: 50 Hz Speed: 1,500 rpm Protection class: IP44 Insulation class: B Design: stationary industrial radial / extraction fan Control cabinet / control System designation: extraction system Year of manufacture of control: 06/1995 Rated voltage: 3 x 400 V / 50 Hz Power: 11 kW Rated current: 23 A Fuse rating: 35 A Control voltage: 230 V Wiring diagram no.: 95-189-1 Existing control cabinet including fan control included in the scope of delivery Condition Used, functional condition with signs of wear and tear due to age and use. The current test run was successful. Inspection and functional demonstration possible by arrangement. Video of the test run available upon request. Location / Dismantling Location: 3608 Thun, Switzerland. The fan and the control cabinet are still installed. Dismantling, removal, loading and transport are the complete responsibility of the buyer and will be carried out at his expense. Terms of sale Sale from the location. Sale in the existing used condition, as inspected. No guarantee or warranty, to the extent permitted by law. Technical data provided to the best of our knowledge; errors and prior sale reserved. On-site inspection is possible and recommended by appointment. Selling price: 1,500.00 EUR Price net, any applicable statutory taxes and duties. Export, customs clearance and import duties are the responsibility of the buyer.

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, working width: 430 mm, area performance: 1,935 m²/h, overall weight: 160 kg, warranty duration: 12 months, water tank capacity: 40 l, TASKI SWINGO 755B Scrubber-Dryer New SIAP 12V 85Ah gel batteries (2x) Gkjdpfsz Rnrfsx Al Usc 2018 model year 430mm cleaning head equipped with a new medium-stiffness disc brush, suitable for use on all surface types. New polyurethane squeegee blades, resistant to oils, greases, and petroleum-based substances. Built-in battery charger for convenient daily operation. Suction motor ensures powerful water pickup from the squeegee assembly. Each unit we offer features custom-taken photos; you are buying the exact machine shown. TECHNICAL DATA: Supply voltage: 24 V Brush working width (mm): 430 Squeegee working width (mm): 690 Theoretical coverage (m²/h): 1935 Brush pressure (kg): 32 Tank capacity (l): 40/40 Machine weight ready for operation (kg): ~160 Dimensions (L x W x H) (mm): 1160 x 475 x 1195 INCLUDED: NEW 12V 85Ah SIAP gel batteries (2x) NEW 430mm disc brush (PPL 0.8) 24V 500W vacuum motor Squeegee assembly with new blades Built-in battery charger Tenzi Normal cleaning fluid (5 liters) – FREE KEY FEATURES: The 40-liter tank allows for a large volume of cleaning solution, minimizing the need to stop work for refills. The machine's design ensures excellent maneuverability; a tight turning radius allows for operation in narrow passages and aisles. The parabolic squeegee ensures thorough extraction of the solution from the cleaned surface. The wide working width (430mm) ensures high area coverage. Highly legible and intuitive control panel.

Condition: reconditioned (used), Year of construction: 2021, functionality: fully functional, working width: 550 mm, area performance: 2,475 m²/h, overall weight: 179 kg, warranty duration: 12 months, water tank capacity: 40 l, TASKI SWINGO 955B Scrubber-Dryer New SIAP 12V 85Ah gel batteries (2x) New NEOS 24V 10A charger Year of manufacture: 2021 550mm cleaning head equipped with new medium-stiffness disc brushes, suitable for use on any surface. New polyurethane squeegee blades, resistant to oils, greases, and petroleum-based substances. Wheel drive facilitates daily operation. Suction motor ensures high water recovery power from the squeegee tool. Each unit we offer features custom-taken photos; you are buying the exact machine shown. TECHNICAL DATA: Supply voltage: 24 V Brush working width (mm): 550 Squeegee working width (mm): 800 Gkedpjz Rpa Dsfx Al Ujc Theoretical coverage (m²/h): 2475 Working speed (km/h): 4.5 Tank capacity (l): 40/40 Weight ready for operation (kg): ~179 Dimensions (L x W x H) (mm): 1180 x 800 x 1150 INCLUDED: NEW SIAP 12V 85Ah gel batteries (2x) NEW NEOS 24V 10A charger NEW 280mm disc brushes (2x) 24V 500W suction motor Suction hose + drain hose Squeegee assembly with new oil-resistant blades Tenzi Normal cleaning fluid (5 liters) – FREE KEY FEATURES: The 40-liter tank allows for a large volume of cleaning solution, minimizing the need to stop work for refills. The machine's design makes it highly maneuverable. A tight turning radius enables operation in narrow passageways and aisles. The parabolic squeegee ensures thorough extraction of the solution from the cleaned surface. The wide working width (550mm) ensures high area coverage. Clear and intuitive control panel.

Year of construction: 1995, condition: used, COMI SL2000 x 900 x 550mm Thermoforming Machine. S/No. 646 (1995) TECHNICAL DATA OF THE EQUIPMENT Max. frame inner size mm 2005 x 905 Scrap cutter motor power kW 3 Max. tool base size mm 2000 x 900 Scrap conveyor motor power kW 0.37 Min. tool base size mm 700 x 500 Finished workpiece discharge belt motor power kW 0.75 Max. sheet size mm 2090 x 960 Cross-cutting motor power kW 0.25 Min. sheet size mm 790 x 560 Cross-cut scrap conveyor motor power kW 0.22 Max. tool height mm 800 (550+250) Transfer unit motor power kW 1.5 Maximum formed workpiece height mm 550 Auxiliary units max. consumption kW 5.10 Max. sheet stack height mm 1000 Max. installed power kW 375 Max. pallet height mm 180 Tempering unit power kW 52 Upper heating power kW 83.3 Power consumption at 70% load kW 262.5 Lower heating power kW 71.3 Vacuum pumps capacity m3/h 750 (250x3) Upper preheating power kW 52 Gsdpfx Aez I Sbdol Ujkc Tool vacuum tank capacity L 2000 Lower preheating power kW 46.8 Bell vacuum tank capacity L 2000 Oil pump motor power kW 19 (15+4) Required oil quantity L 600 Vacuum pump motor power kW 23.4 (7.8x3) Required air pressure kPa 600 Sheet centering motors power kW 0.24 (0.12+0.12) Incoming water pressure kPa 200-300 Sheet feed motor power kW 2.2 Max. hydraulic operating pressure MPa 18 Sheet feed width-adjustment motor power kW 2.2 Hydraulic operating pressure MPa 10 Sheet picker motor power kW 0.37 Incoming water temperature °C 12-20 Location: These lots are located in Susegana, Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Year of construction: 2011, condition: used, MSK Covertech Tension Tech Stretch Hood Wrapping Machine. S/No. 371-3 (2011) Gsdpfxez I Suws Al Uekc Location: These lots are located in Susegana, Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Year of construction: 1982, condition: used, Sapim Door Panel Line (1982), Panel Dimension Min/Max Length 490/1730mm x 538mm Width, Cycle Time 13 Seconds, Dimension of Sheet Min/Max Length 550/1800mm x 538mm Width x 0.5mm Thickness Godpfx Aez I Sx Aol Ujkc Location: These lots are located in Susegana, Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser

Condition: used, Year of construction: 2017, functionality: fully functional, total length: 3,820 mm, total height: 2,105 mm, total width: 2,010 mm, type of input current: three-phase, product height (max.): 380 mm, product length (max.): 2,000 mm, input voltage: 415 V, compressed air connection: 6 bar, input current: 43 A, working height: 1,105 mm, length of welding knife: 1,370 mm, passage height: 380 mm, overall weight: 1,180 kg, power: 26.7 kW (36.30 HP), film width: 1,350 mm, input frequency: 60 Hz, year of last overhaul: 2026, space requirement width: 2,010 mm, Equipment: documentation/manual, safety light barrier, For sale is a used Saropack / SMIPACK BP1402AS strapping machine with an integrated shrink tunnel, manufactured in 2017. The machine was used in our facility, regularly maintained, and is in fully functional and ready-to-use condition. Suitable for the automatic or semi-automatic packaging and strapping of various products with shrink film. Technical data: - Manufacturer: SMIPACK S.p.A. / Saropack - Model: BP1402AS - Year of manufacture: 2017 - Serial number: 63604 - Connection: 3PH + N + PE - Voltage: 380–415 V - Frequency: 50–60 Hz - Power: 26.7 kW - Current consumption: 43 A Godpfoz I Sz Rjx Al Uskc - Sealing bar: approx. 1,370 mm - Maximum product height: approx. 380 mm - Automatic and semi-automatic operation - Motorized film unwinding - Integrated shrink tunnel - Suitable for shrink film / LDPE film Condition: Used, regularly maintained, and fully functional. Normal signs of wear and tear consistent with age and use. The machine can be inspected and demonstrated in operation by arrangement. Location: Kestenholz, Switzerland Price: EUR 22,900 (negotiable) Transport and loading by arrangement.

Year of construction: 1959, condition: used, functionality: fully functional, machine/vehicle number: 59/4235, We are offering this used Probat UG 22 drum roaster, manufactured in 1959, which was completely overhauled in 2010 and has been in use at our facility since 2011. It is a gas-fired model and includes a destoner, cyclone, cooling sieve, and chimney. This machine was used in our production until recently and initially roasted 2 tons, and later around 10-15 tons of green coffee. It was completely overhauled in 2010, including new electrical components, and has been running reliably ever since. We are selling it because we are closing down the business. Gsdoz I Tyzepfx Al Uskc Type: UG 22n Serial number: 59/4235 Year of manufacture: 1959 Heating: Gas [natural gas] Voltage: 230/400 V Current: 16 A Frequency: 50 Hz Temperature sensor: retrofitted, WLAN-enabled, for digital recording of the roasting curve [e.g., Artisan] Included in the scope of supply: Destoner Cyclone Cooling sieve Chimney Connecting pipes --> Ready for immediate use If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2024, operating hours: 6 h, functionality: fully functional, Manufacturer: Spaleck Oberflächentechnik Model: Z1 Year of manufacture: 2024 Used, like new condition Operating hours: 6 h Technical data according to the manufacturer: Working container volume: 11 l Usable volume: 7 l Turntable speed: approx. 280 rpm Drive power: 0.75 kW Height of working container: 1,000 mm Godpfez H Rfxox Al Uskc Operating voltage: 400 V, 50 Hz Dimensions (W x D x H): approx. 530 x 950 x 1,350 mm The system has been dismantled and is stored at our facility. An inspection is possible by appointment.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, overall weight: 109,000 kg, input voltage: 110,000 V, input frequency: 50 Hz, warranty duration: 24 months, nominal power (apparent): 100,000 kVA, nominal power: 100,000 kW (135,962.00 HP), secondary voltage: 33 V, temperature: 70 °C, empty load weight: 109,000 kg, input current: 530 A, type of output current: three-phase, output voltage: 33,000 V, Equipment: documentation/manual, type plate available, 110/33 kV transformer with 80 MVA capacity without forced air cooling and 100 MVA with forced air cooling, cooling type ONAF. Switching method: YNyn0+d. Gkodpfx Aljz Iycvs Ujc The transformer was intended for connecting a wind farm and a battery storage system, neither of which is currently being implemented. Therefore, the transformer is being offered at a price significantly below the purchase price. The transformer will be inspected and accepted on October 23rd/24th, 2026, in Ljubljana, Slovenia, at the manufacturer Kolektor ETRA’s testing facility.

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, operating hours: 6,656 h, load capacity: 4,000 kg, lifting height: 4,050 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,780 mm, motor manufacturer: GM, gearing type: hydrostat, fork carriage width: 1,320 mm, fork length: 850 mm, fork width: 130 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200 / 50 - 10, rear tire type: cushion tires (black), rear tire size: 27 X 10 - 12, overall weight: 9,800 kg, empty load weight: 5,800 kg, total height: 2,450 mm, total length: 2,000 mm, total width: 2,250 mm, color: green, Equipment: 3rd hydraulic function, CE marking, all wheel drive, cabin, fork extension, front guard, hydraulic fork positioner, pallet forks, 🚜 COMBILIFT C4000 | DUPLEX 4050 MM | FORK POSITIONER | FULL CABIN | GM 3.0 LPG | READY TO WORK 🔧 FULLY SERVICED | 🛡️ WARRANTY | 🛞 BRAND NEW SUPERELASTIC TIRES | 🌍 WORLDWIDE DELIVERY Are you looking for a reliable multidirectional forklift that starts generating value from day one, instead of creating additional service costs? This machine is the right choice. We offer a proven 2004 COMBILIFT C4000, equipped with a GM 3.0 LPG engine, DUPLEX mast, and hydraulic fork positioner. Before delivery, the machine undergoes a comprehensive technical inspection, complete service, and detailed testing and is supplied ready for immediate operation. ⭐ KEY BENEFITS 🔧 Complete service before sale 🛡️ Start-up warranty 🛞 Brand new superelastic tires – front & rear ⚙️ GM 3.0 LPG engine ↔️ Hydraulic fork positioner 🚪 Full cabin 💡 Work lights 🚨 Warning beacon ✨ Very good technical & visual condition ✅ Ready to work without additional investment 📹 Live online presentation available 🚛 Direct delivery available 📋 TECHNICAL SPECIFICATION 🏭 Manufacturer: COMBILIFT 🔹 Model: C4000 📅 Year: 2004 ⏱️ Operating hours: 6656 h 🏋️ Load capacity: 4000 kg ⚖️ Machine weight: 5800 kg 🔥 Power: LPG / Gas ⚙️ Engine: GM 3.0 ⬆️ Mast: DUPLEX Gkjdpfx Aoz I Afgol Usc 📏 Lifting height: 4050 mm ↔️ Hydraulic fork positioner: Yes 📐 Fork positioner width: 1320 mm 🍴 Forks: 850 x 130 x 50 mm 🚪 Cabin: Full 📐 DIMENSIONS ↕️ Overall height: 2450 mm ⬆️ Mast closed height: 2780 mm ↔️ Length: 2000 mm ↔️ Width: 2250 mm 🛞 TIRES Front: 200/50-10 superelastic – 100% brand new Rear: 27x10-12 superelastic – 100% brand new 🧰 EQUIPMENT ↔️ Hydraulic fork positioner 🚪 Full cabin 💡 Work lights + front work lamp 🚨 Warning beacon 🌧️ Wipers 🔧 Third hydraulic valve ⚙️ GM 3.0 LPG engine 🛞 Brand new superelastic tires 🏭 IDEAL FOR 🪵 Timber industry 🏗️ Steel mills & steel stockholders 🔩 Steel construction manufacturers 📦 Pipes, profiles & long materials 🧱 Building material industry 🏭 Production facilities 🌦️ Indoor & outdoor operation 🏆 WHY FT LOGISTICS? FT LOGISTICS specializes in forklifts, sideloaders, multidirectional forklifts, and warehouse equipment. Every machine undergoes a comprehensive inspection, complete service, and detailed testing before delivery. 🌍 100+ machines available from stock, supplied to customers throughout Europe, South America, Africa, Asia, and the Middle East. 🤝 WE PROVIDE 🔧 Complete service before sale 🛡️ Warranty 👨‍🔧 Professional technical advice 💶 Leasing & financing 🚛 Transport organization 🌍 Export & customs documentation 🤝 After-sales support Hundreds of customers across Europe have trusted our machines and return for further purchases. 📹 Live online presentation, additional photos, and videos are available. We can also prepare an individual transport quotation directly to your company. 🚜 FT LOGISTICS – WE DELIVER MACHINES READY TO WORK.

Condition: used, Year of construction: 2024, operating hours: 682 h, functionality: fully functional, working width: 510 mm, area performance: 1,530 m²/h, overall weight: 240 kg, tank capacity: 55 l, This used, trailing-type scrubber dryer BD 50/55 W Classic from Kärcher (year of manufacture: 2024 | operating hours: 682) has been technically overhauled and cosmetically refurbished in our in-house workshop. The brush head and suction bar have been newly powder-coated. New suction strips and a new disc brush have been installed. Thanks to its compact design, the machine offers excellent visibility. The self-explanatory operation allows for easy starting and reduces the need for training. Gjdez Nd Nqspfx Al Uokc The standard curved suction bar ensures rapid drying thanks to the reduced residual water on the cleaned surfaces. The integrated drive system and the comfortable four-wheel system make it easy and energy-efficient to operate. An externally supplied charger ensures that the batteries are charged during daily use. The BD 50/55 is suitable for use in public buildings, in retail stores and car dealerships, as well as in industrial environments. Technical data: Working width, brushes: 510 mm Working width, suction: 850 mm Tank capacity, fresh/dirty water: 55 / 55 l Theoretical area performance: max. 2550 m²/h Practical area performance: 1530 m²/h Permissible total weight: 240 kg

Condition: reconditioned (used), functionality: fully functional, pressure: 200 bar, input voltage: 400 V, overall weight: 168 kg, temperature: 155 °C, Kärcher HDS 10/20-4MX Hot Water Pressure Washer The unit comes with new accessories, including a German-made R+M spray gun, a stainless steel lance, a steel-reinforced hose, and a 25° power nozzle. A built-in high-pressure hose reel makes winding and storage easy. A durable brass pump head with new ceramic pistons and seals ensures long, trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable performance, even during prolonged use. With operating parameters of 200 bar and 1000 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer features custom-taken photos; you are buying the exact machine shown. TECHNICAL DATA: Model: HDS 10/20-4MX Supply voltage: 400 V ~ 3-phase Flow rate (l/h): 500 – 1000 Gedpfoz Nguijx Al Ujkc Operating pressure (bar): 30 – 200 Max. Water heating temperature (°C): 80–155 Connected load (kW): 7.8 Fuel tank capacity (l): 25 Detergent tank capacity (l): 20 + 10 High-pressure hose length (m): 20 Weight (kg): 168 Dimensions (L x W x H mm): 1330 x 750 x 1060 EQUIPMENT: Built-in hose reel NEW heavy-duty high-pressure gun (German brand R+M) NEW stainless steel spray lance NEW reinforced 20m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Two built-in detergent tanks allow for direct dosing of cleaning fluid through the machine Highly legible and intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other lines. The exhaust gas temperature sensor shuts down the engine if the temperature exceeds 300°C. When the eco!efficiency function is activated, the unit heats the water to 60°C, enabling effective cleaning—even of heavy soiling—while reducing fuel consumption by approximately 20%.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 2,245 h, load capacity: 2,500 kg, lifting height: 4,900 mm, free lift: 1,380 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,250 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 1,400 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16 x 7 x 10½, rear tire type: cushion tires (black), rear tire size: 23 x 10 x 16, overall weight: 8,800 kg, empty load weight: 6,300 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: green, Equipment: CE marking, all wheel drive, cabin, head guard, lighting, pallet forks, sideshift, # 🚜 COMBILIFT CB3000 | LPG | 4900 MM | FORK POSITIONER | SIDE SHIFT | FULL CABIN | READY FOR WORK ✅ ## 🔧 FULLY SERVICED MACHINE | 🛡️ WARRANTY | 🌍 WORLDWIDE DELIVERY AVAILABLE If you are looking for a forklift that will generate value from day one instead of incurring maintenance costs, this machine is the perfect solution. We offer a modern and fully prepared COMBILIFT CB3000 multidirectional forklift, professionally serviced, thoroughly inspected, and ready for immediate operation in warehouses, production facilities, timber yards, steel service centers, and logistics environments. --- ## ⭐ Key Benefits ✅ Fully serviced prior to sale ✅ Start-up warranty included ✅ Excellent technical and cosmetic condition ✅ Low operating hours – only 2,245 h ✅ Ready for immediate operation with no additional investment required ✅ Live online demonstration available ✅ Direct delivery to your facility available --- # 📋 TECHNICAL DATA 🏭 Manufacturer: COMBILIFT 🚜 Model: CB3000 📅 Year of Manufacture: 2023 🔢 Serial Number: 73868 ⚖️ Capacity: 2,500 kg 📏 Load Center: 600 mm ⛽ Engine: Kubota LPG Gas ⚙️ Engine Power: 42 kW 🕒 Operating Hours: 2,245 h ⬆️ Lift Height: 4,900 mm 🏋️ Machine Weight: 6,300 kg --- # 📐 DIMENSIONS 📏 Overall Height: 2,250 mm 📏 Construction Height: 2,250 mm 📏 Overall Length: 1,550 mm 📏 Overall Width: 1,550 mm 📏 Fork Positioner Width: 1,400 mm --- Godpfxjz Ni Dte Al Uokc # 🔩 FORKS 📌 Fork Length: 1,200 mm 📌 Fork Section: 120 x 50 mm --- # 🛞 TIRES Front: 16 x 7 x 10½ Rear: 23 x 10 x 16 --- # 🛠️ EQUIPMENT ✅ Full enclosed cabin ✅ Heating system ✅ Radio ✅ Hydraulic fork positioner ✅ Side shift ✅ Working lights ✅ Kubota LPG engine ✅ Multidirectional steering system ✅ Operator comfort package --- # 🏭 IDEAL FOR 🌲 Timber and wood processing industry 🪑 Furniture manufacturers 🏗️ Steel mills and steel service centers 🔩 Aluminium and PVC profile handling 📦 Handling of long loads ↔️ Narrow aisle operations 🏢 Indoor and outdoor applications --- # 🤝 WHY CHOOSE FT LOGISTICS? When purchasing from FT LOGISTICS, you are working with a company specialized exclusively in: ✅ Sideloaders ✅ Multidirectional forklifts ✅ Long-load handling equipment ✅ Specialist material handling solutions Every machine undergoes a comprehensive technical inspection, full service, and operational testing before delivery. 🌍 With more than 100 machines available from stock, we supply customers throughout Europe, South America, Africa, Asia, and the Middle East. --- # 🚀 WE PROVIDE 🔧 Full service before delivery 🛡️ Warranty 👨‍🔧 Professional technical support 💰 Leasing and financing assistance 🚛 Transport organization 📄 Export documentation and customs support 🔩 After-sales service --- Hundreds of customers across Europe trust our equipment and continue to return for future purchases. 📹 We can arrange a live online demonstration. 📸 Additional photos and videos available upon request. 🚛 Customized transport quotation available for any destination worldwide. --- # FT LOGISTICS ### 🚜 We Deliver Machines Ready for Work.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 3,674 h, load capacity: 5,000 kg, lifting height: 5,550 mm, free lift: 1,700 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,720 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 1,360 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 23 Z 10 - 12, rear tire type: cushion tires (black), rear tire size: 28 X 12,5 - 15, overall weight: 12,300 kg, empty load weight: 7,300 kg, total height: 2,550 mm, total length: 2,500 mm, total width: 2,400 mm, color: green, Equipment: CE marking, cabin, head guard, lighting, pallet forks, sideshift, # 🚜 COMBILIFT C5000XL DIESEL TRIPLEX 5550 MM FORK POSITIONER FULL FREE LIFT FULL CABIN READY FOR WORK ## ✅ FULLY SERVICED ## ✅ WARRANTY INCLUDED ## 🌍 WORLDWIDE DELIVERY AVAILABLE Are you looking for a reliable multidirectional forklift that is ready to generate value from day one instead of creating unexpected maintenance costs? This Combilift C5000XL has been professionally prepared by our experienced service team and is ready for immediate operation. The truck has undergone a complete technical inspection, full servicing, and extensive operational testing to ensure maximum reliability and performance. Ideal for production facilities, warehouses, steel service centers, and companies handling long or bulky materials. --- # ⭐ Key Advantages ✅ Fully serviced before delivery ✅ Startup warranty included ✅ Brand new Super Elastic tires ✅ Excellent technical and cosmetic condition ✅ Ready for immediate operation with no additional investment ✅ Live online video inspection available ✅ Worldwide shipping available --- # 📋 Technical Specifications Manufacturer: Combilift Model: C5000XL Year of Manufacture: 2017 Load Capacity: 5000 kg Engine: Diesel Operating Hours: 3764 h Mast Type: Triplex Lift Height: 5550 mm Fork Positioner Opening: 1360 mm Fork Length: 1200 mm Cabin: Full enclosed, heated cabin Truck Weight: 7300 kg --- # 📏 Dimensions • Overall Height: 2550 mm • Length: 2500 mm • Width: 2400 mm • Mast Closed Height: 2720 mm --- # 🛞 Tires Front: 23 x 10 - 12 Rear: 28 x 12.5 - 15 Condition: 100 percent brand new Super Elastic tires --- # ⚙ Equipment ✔ Hydraulic Fork Positioner ✔ Full Enclosed Heated Cabin ✔ Full Free Lift ✔ Working Lights --- # 🏭 Ideal For ✔ Timber Industry ✔ Steel Mills ✔ Steel Service Centers ✔ Structural Steel Manufacturers ✔ Pipe and Profile Handling ✔ Long Material Transportation Gkjdpfx Aoz Ni E Rol Uec ✔ Indoor and Outdoor Applications --- # 💼 Why Choose FT LOGISTICS FT LOGISTICS specializes exclusively in forklifts, multidirectional forklifts, side loaders, and warehouse equipment. Every machine is thoroughly inspected, professionally serviced, and tested before delivery to guarantee reliability and immediate productivity. We currently have more than 100 forklifts available from stock and supply customers throughout: 🌍 Europe 🌍 South America 🌍 Africa 🌍 Asia 🌍 Middle East --- # 🤝 What We Offer ✅ Complete pre-delivery inspection and servicing ✅ Warranty ✅ Professional technical support ✅ Leasing and financing solutions ✅ Worldwide transport organization ✅ Export documentation and customs support ✅ After-sales service --- # 🎥 Additional Services We can provide: 📹 Live online video demonstration 📸 Additional high-resolution photos 🎬 Detailed walk-around videos 🚛 Customized transport quotation to your location anywhere in the world --- ## ⭐ Hundreds of customers across Europe and worldwide trust FT LOGISTICS and continue to purchase from us thanks to the quality of our machines and professional customer service. ## FT LOGISTICS ### We Deliver Machines Ready To Work

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 61 h, load capacity: 4,000 kg, lifting height: 6,350 mm, free lift: 1,890 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,920 mm, motor manufacturer: ELECTRIC, gearing type: hydrostat, battery manufacturer: GNB, battery capacity: 625 Ah, remaining battery capacity: 95 %, battery voltage: 62 V, battery weight: 1,200 kg, fork carriage width: 3,350 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 405 X 220 X 305, rear tire type: cushion tires (black), rear tire size: 27 X 10 - 12, overall weight: 10,650 kg, empty load weight: 6,650 kg, total height: 2,450 mm, total length: 2,350 mm, total width: 2,620 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, # 🚜 COMBILIFT C4000ET | ELECTRIC | TRIPLEX 6350 MM | 3350 MM WIDE FORK POSITIONER | FREE LIFT | FULL CAB | READY TO WORK ## ✅ FULLY SERVICED | 🛡️ WARRANTY | 🌍 WORLDWIDE DELIVERY If you are looking for a forklift that generates value from day one, rather than creating unexpected maintenance costs, this machine is the perfect choice. We are offering a fully inspected and work-ready Combilift C4000ET multidirectional sideloader. The truck has undergone a comprehensive technical inspection, complete servicing, and extensive operational testing. It is ready for immediate use in manufacturing facilities, warehouses, steel service centres, timber yards, and logistics operations. --- # ⭐ Key Features ✅ Fully serviced before sale 🛡️ Warranty included 🆕 Brand new super elastic tyres 🔧 Excellent mechanical and cosmetic condition 🚀 Ready for immediate operation with no additional investment required 🎥 Live online video demonstration available 🚛 Worldwide delivery directly to your facility --- # 📋 Technical Specifications Manufacturer: Combilift Model: C4000ET Year of Manufacture: 2021 Load Capacity: 4000 kg Power: Electric Operating Hours: 61 h Mast Type: Triplex Lift Height: 6350 mm Wide Fork Positioner: 3350 mm Fork Length: 1200 mm Free Lift: Yes Cab: Fully enclosed and heated Truck Weight: 6650 kg ### 📐 Dimensions • Height: 2450 mm • Length: 2350 mm • Width: 2620 mm • Overall Mast Height: 2920 mm ### 🛞 Tyres Front: 405 × 220 × 305 Rear: 27 × 10 - 12 Condition: ✅ 100% Brand New --- # ⚙️ Equipment ✔️ 3350 mm Wide Fork Positioner ✔️ Fully Enclosed Heated Cab ✔️ Free Lift ✔️ Working Lights --- # 🏭 Ideal Applications 🌲 Timber and Wood Processing Industry 🏗️ Steel Mills and Steel Service Centres 🔩 Structural Steel Fabrication 📦 Handling Pipes, Profiles and Long Loads 🏢 Indoor and Outdoor Material Handling --- # 🤝 Why Choose FT LOGISTICS When you purchase from FT LOGISTICS, you are buying from a company specialising exclusively in forklifts, sideloaders, multidirectional forklifts, and warehouse equipment. Every machine undergoes a complete technical inspection, professional servicing, and performance testing before delivery. We maintain an inventory of more than 100 machines available for immediate delivery and supply customers throughout Europe, South America, Africa, Asia, and the Middle East. --- Gedpfxoz Ni Ure Al Uskc # ✔️ We Provide 🔧 Full Pre-Delivery Service 🛡️ Warranty 👨‍🔧 Professional Technical Support 💳 Leasing and Financing Solutions 🚛 Worldwide Transport Arrangements 📄 Export Documentation and Customs Clearance 🤝 Comprehensive After-Sales Support --- # 🌍 Trusted Worldwide Hundreds of customers across Europe and international markets trust our machines and continue to return for future purchases. We can arrange: 🎥 Live Online Machine Demonstration 📷 Additional High-Resolution Photographs 🎬 Detailed Walk-Around Videos 🚛 Personalized Worldwide Transport Quotations --- # 🏢 FT LOGISTICS ## 🚜 Ready-to-Work Forklifts Delivered Worldwide 🌍 Quality. Reliability. Experience.

Condition: reconditioned (used), Year of construction: 2008, operating hours: 1,592 h, functionality: fully functional, working width: 650 mm, area performance: 3,200 m²/h, overall weight: 391 kg, warranty duration: 12 months, water tank capacity: 74 l, Hako Hakomatic B70 CL TB650 Scrubber-Dryer New SIAP 6V 175Ah gel batteries (4x) Year of manufacture: 2008; operating hours: 1,592 650 mm cleaning head (TB650) equipped with two new medium-stiffness disc brushes, suitable for use on any surface New polyurethane squeegee blades, resistant to oils, greases, and petroleum-based substances Built-in battery charger and wheel drive facilitate daily operation The unit is equipped with a new, durable drain hose and a new suction hose A new suction motor ensures high water pickup power from the squeegee Each unit we offer features unique, actual photos; you are buying the exact machine shown TECHNICAL DATA: Supply voltage (V): 24 Brush working width (mm): 650 Squeegee working width (mm): 950 Theoretical coverage (m²): 3200 Working speed (km/h): 5 Tank capacity (l): 72/74 Weight (kg): ~391 Power (kW): 2.28 INCLUDED: NEW 6V 175Ah SIAP gel batteries (x4) NEW 330mm PPL 0.5 disc brushes (x2) NEW 24V 600W suction motor NEW suction hose NEW drain hose NEW brush head splash guard Gkedpfxez Nkrxo Al Uoc Squeegee assembly with new oil-resistant blades Built-in battery charger Tenzi Normal cleaning fluid (5 liters) – FREE KEY FEATURES: The 72-liter tank allows for a large volume of cleaning solution, minimizing the need to stop work for refills The machine's design ensures excellent maneuverability. A tight turning radius allows for operation even in narrow passageways and aisles. The parabolic squeegee ensures thorough suction of the solution from the cleaned surface. A wide working width (650 mm) ensures high area coverage. A highly legible and intuitive control panel.