Used Soil Treatment Plant for sale (4,263)

Condition: excellent (used), the plant is consisting of: - 2 chain separators - 2 55 cbm³ silos with discharge screws - 2 discharge screws - 4 mixing and homogenising chambers, - 5 conveyor belts - 2 double-shaft extruders connected in parallel - 1 double shaft mixers Dkodpfolxzl Esx Ai Eew - container for liquid extracts, etc.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: QuickTOCultra, Manufacturer: LAR Dkodpov N U Tlofx Ai Esw Type: QuickTOCultra Description: TOC analyzer Technical specifications: Measurement parameters: TOC (Total Organic Carbon), DOC, TIC, TC Measurement principle: High-temperature combustion (HTC) at 1,200°C – no wet chemical reagents required Measurement ranges: 0.1 ppb to 20,000 ppm (depending on configuration) Complies with standards: EN 1484, ISO 8245, EPA 415.3 Applications: Drinking water, process water, wastewater, ultrapure water (USP/Ph.Eur.), pharmaceuticals, chemicals Sampling: continuous online operation Interfaces: 4–20 mA output, RS-232, Modbus (depending on configuration) Power supply: 230 V AC, 50/60 Hz

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 70 bar, total height: 4,000 mm, total width: 2,550 mm, total length: 13,900 mm, temperature: 40 °C, operating pressure: 70 bar, noise level: 60 dB, input current: 150 A, energy consumption: 75 kWh, Equipment: documentation/manual, rotational speed infinitely variable, Mobile treatment system for digestate, slurry, and slaughterhouse wastewater Biogas plants and animal husbandry operations are facing increasing costs for the disposal and transport of liquid digestate and slurry. This system treats the wastewater on-site, separating it into clean permeate and a nutrient-rich concentrate. The permeate can be discharged, used for irrigation, or as utility water, and the concentrate can be used as fertilizer. The volume that needs to be transported is significantly reduced. The entire system is mounted on a trailer. It is delivered, connected, and put into operation. Foundations, buildings, or permits for permanent installations are not required. PROCESS 1. Pre-separation: equalization tank, peristaltic pump, two cyclones for the removal of sand and heavy solids 2. Ozone oxidation reactor: oxidative decomposition of the organic load with ozone directly in the water stream 3. Lamella separator: separation of coarse suspended solids Dsdpfxjw Uf Iho Ai Ejkw 4. Microflotation (DAF): separation of suspended particles with microbubbles and ozone 5. Multi-layer filter: fine separation before the membrane stage 6. Reverse osmosis: open-channel modules with parallel spacers, up to 70 bar, very fouling-tolerant. The RO concentrate is returned to the DAF. RESULTS FROM PILOT OPERATION (Evaluation by the Fraunhofer Institute) Biogas digestate (decanter): - COD: over 20,000 mg/l in the influent, 12 mg/l in the permeate - Total nitrogen: 4,800 mg/l in the influent, 25 mg/l in the permeate - N removal: 99% Slaughterhouse wastewater: - COD: over 20,000 mg/l in the influent, 26 mg/l in the permeate - Total nitrogen: 2,750 mg/l in the influent, 120 mg/l in the permeate - N removal: 95% Pig slurry (separated): - COD: over 20,000 mg/l in the influent, 34 mg/l in the permeate - Total nitrogen: 2,500 mg/l in the influent, 180 mg/l in the permeate - N removal: 91% The values are from pilot operation and laboratory validation. We will determine the performance for your wastewater after a water analysis, and we can also offer an on-site trial run. YOUR ADVANTAGES - Reduced volume for storage, transport, and application - Permeate can be used for discharge, irrigation, or as utility water - Concentrate can be used as fertilizer - Mobile: can be used at different locations, trial run without investment - Energy-efficient ozone oxidation, power consumption per m³ on request - Fully automatic PLC control APPLICATIONS - Biogas plants: digestate treatment after the decanter - Pig and cattle farming: slurry treatment - Slaughterhouses and the food industry - Other industrial wastewater with high organic loads, after evaluation TECHNICAL DATA System type: mobile wastewater treatment, ozone oxidation + DAF + RO Design: 40-ft trailer Process stages: cyclones, ozone oxidation reactor, lamella separator, DAF, multi-layer filter, reverse osmosis RO modules: open-channel, 26.5 m² per module, up to 70 bar COD influent: over 20,000 mg/l (pilot) COD permeate: 12 to 34 mg/l (pilot) N removal: 91 to 99% (pilot) Control: PLC, fully automatic Electrical: 400 V / 50 Hz, connected load 75 kW, fuse rating 150 A MARKETING - Rental with or without operation - Treatment per m³: RIEFILT provides and operates the system; you pay per treated cubic meter - Purchase on request - On-site trial run possible to confirm the performance data NOTES ON THE INFLUENT For the design, we need an analysis of your wastewater (at least TS, COD, N-total, NH4-N, conductivity, pH) and the

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 1,200 mm, pressure: 5 bar, total width: 1,800 mm, operating pressure: 4 bar, Now offering a new treating plant with a fully automatic door type IWT-Moldrup Timber Impregnation Plant – Ø1,800 × 12,000 mm Industrial pressure impregnation plant for the treatment of timber. The plant will be manufactured following an order and configured to suit the buyer’s treatment process and production requirements. Industrial Timber Impregnation Plant – Ø1,800 × 12,000 mm The plant is built around a pressure vessel measuring Ø1,800 mm in diameter and 12,000 mm in length. The specification can be tailored to the required preservative, timber dimensions, treatment cycles and level of automation. We offer to supply both autoclave alone and complete treating plant incl. pumpskid, storage tank etc. Dodpfx Aisz Eg Nqo Eskw Depending on the agreed scope of supply, the installation can include preservative storage and working tanks, vacuum and pressure pumps, process piping and valves, timber loading equipment, safety systems and PLC-based controls. We can supply the plant with process automation and provide supervision during installation and commissioning, as agreed in the written contract. This is an offer for a newly manufactured plant. The equipment shown or described is not an existing plant available for immediate delivery. Final technical specifications, scope of supply, price and delivery time will be confirmed in our quotation. We also offer other diameters and lengths upon request. Please contact us with your treatment requirements for a detailed proposal.

Condition: good (used), Year of construction: 2005, PureWaterPlant / Pharmaceutical water treatment plant Make: LETZNER 400 ltr. / h Dsdpfx Aiomfnv Se Eskw with tank, piping, control box, etc. with operating instructions, etc.

Year of construction: 1996, condition: good (used), Offer: Drinking water treatment plant Water treatment plant Dsdpfx Aiohr D Hns Eskw 120 cubic meters/hour Year of manufacture: 1996 Fully functional Housed in a 6m container Control system and pumps included. Previously used to supply a container village.

Condition: used, Year of construction: 2011, Water treatment plant from Grünbeck for treatment of brewing and process water. Fully mounted on a stainless steel frame and controllable via Simatic S7-300. Reverse osmosis system for removing hardness compounds, salts, particles and micro-contaminants from water. This produces brewing water with the desired hardness. To protect the membranes, coarser particles are first removed in two fine filters (with pore sizes of 50 µm and 5 µm respectively). Desalination then takes place in two pressure pipes containing membrane modules. Includes sterilization filtration, membrane modules, chemical dosing, centrifugal pump, piping, valves, measurement technology, and control cabinet with touch panel. Additional title: reverse osmosis Permeate capacity: 8000 l/h ; Feed: 10000 l/h Recovery: 80 % Concentrate: 2000 l/h Max. overpressure: 16 bar Power: 6.5 kW Voltage: 3 x 380 - 415 V Frequency: 50 Hz Water: feed 2.5 - 5 bar Length: 5000 mm Width: 1000 mm Height: 2000 mm Operation / Control: Simatic S7-300 Material: membranes from polyamid Dedpfsz E Rv Ujx Ai Ejkw Base construction: on stainless steel frame with feet Features: 2 fine filters; pressure pipes with membrane modules; chemical dosing system with two dosing pumps; centrifugal pump (Lowara); various pipes, valves, and measurement equipment; control cabinet with touch panel

Condition: like new (used), functionality: fully functional, fuel type: electric, Year of construction: 2020, Used crushing and screening plant for sale, backed by the Fabo guarantee; fully maintained and ready for operation. Suitable for processing soft to medium-hard stone, with a high production capacity for sand-rich output. Our plant consists of the following components: 30 m³ rock feed hopper PDK-140 primary impact crusher Cubitzer Impact crusher (secondary) 120-series tertiary crusher 2000x6000 mm vibrating screen 800x4000 mm conveyor belt 800x20000 mm conveyor belt 800x12000 mm conveyor belt Dkodpfx Aj Aigbnji Ejw 600x15000 mm conveyor belt 600x10000 mm conveyor belt 600x10000 mm conveyor belt

Year of construction: 1999, condition: good (used), For sale is a water treatment plant of make ENVOTECH and type 0320 from 1999. In 2016 a new reaction tank of the brand Leiblein, made of stainless steel, with the dimensions of 500*500*400 mm was added. The plant is fully functional and the contact details of the competent service technician are available and can be forwarded at the time of purchase. Technical data & information: - Executed in stainless steel - Including oil separation by coalescence principle - Including automatic cleaning - Built-in pump for waste water, concentrate and distillate - Frequency control of the compressor motor - Type: 0320 - Rated capacity l/h: 320 Energy consumption - In operation: 25 kW - Maximum power: 35 kW Supply voltage: 3*400 V - 50 Hz Dimensions lxwxh: 245x155x265 Face: ca 2600 kg Sound pressure level: 75 dB All data refer to operation with water On request, loading and shipping can be organized throughout Europe. Prices plus VAT Viewing by appointment possible. Contact us, our team is happy to help you. Ch3mj0l3eg Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Dedpfx Aiepl Tqte Eskw Do you need a high quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us please visit our website

Condition: as good as new (ex-display), Year of construction: 2026, Parts cleaning machine / combination spray cleaning system, type L101 HP Automatically operated hot water parts washing machine with basket drive via gearbox motor, stainless steel washing pump (manufacturer: Lowara), spray system with stainless steel nozzles Additionally, manual cleaning with high-pressure nozzle (60 bar) and foot switch, air blow-off gun, large viewing window with gauntlet gloves, LED interior lighting Dksdpfx Aied R Ahlj Ejw - Basket diameter: 910 mm - Usable height: 490 mm - Max. load weight: 200 kg - Spray pressure (washing pump): 2.3 bar - Spray pressure (HD pump): adjustable up to max. 60 bar - Tank volume: 175 liters - Heating: electrically adjustable (room temperature - 60°C) - Machine dimensions (L x W x H): 1,300 x 1,500 x 2,100 mm - Empty weight: approx. 200 kg ++Wash cycle timer freely adjustable (minutes and hours) ++Complete cleaning machine (internal components and external housing) made of ++stainless steel 1.4301 ++Water circulation and loading basket made of stainless steel 1.4301 ++Bath cover with fine filter (2,000 microns) ++Operating hour counter ++Steam extraction with condensate return ++Omron timer for time setting in seconds/minutes/hours OTHER BASKET DIMENSIONS AVAILABLE UPON REQUEST!!!

Condition: used, Year of construction: 2016, Water treatment plant with semi-permeable membrane modules for desalinating pre-treated water. Reverse osmosis takes place via a two-stage process consisting of two pressure pipes, each with two membrane modules. The plant consists of: - Two pressure pipes, each with two membrane modules - Permeate blending and concentrate recirculation - Upstream fine filtration - Various sampling taps - Various measuring instruments for pressure, flow, temperature, conductivity and pH value - Flushing station with flushing tank and flushing pump - Chemical dosing stations for antiscalant and NaOH - High-pressure pump - Various automatic fittings - Control cabinet with touch display Dsdpfxoyxnffj Ai Ejkw Additional title: Reverse osmosis for desalination of raw water Flow rate: 6000 l/h depending on the blending quantity Max. operating overpressure: 14 bar Recovery appr.: 82 % Water: 5-7 m3/h; 1-10 bar Operation / Control: Switch cabinet with touch display Features: 2 pressure pipes, each with 2 membrane modules; sampling taps; fine filters; flushing stations; chemical dosing stations; high-pressure pump; automatic fittings; measurements of pressure, flow, conductivity, temperature and pH value;

Condition: new, Year of construction: 2019, operating hours: 0 h, machine/vehicle number: 20928, Burkhalter water treatment plant (state of the art, Swiss top quality) Dkedpfxjp Hf Ide Ai Ejw - Brand new (the unit has never been installed) - Please consult the attached PDF catalog: There you will find a detailed description of the plant as well as an extensive photo gallery (starting on page 8).

Condition: used, Year of construction: 2007, Prominent water treatment plant, consisting of: 1. Softening: The raw water is fed into the double softener. Only one bottle is ever in operation and the other is in regeneration or stand-by. In the softener, calcium and magnesium are replaced by sodium. The system has a volume counter that switches to the other bottle when the preset quantity is reached. Regeneration takes place with saline solution from the brine tank. The value at the outlet is 0°dH. 2. reverse osmosis: Reverse osmosis fills the permeate tank with demineralised water, so-called permeate. Depending on the raw water quality, water temperature, condition of the membrane and correct setting, different conductance values and operating pressures result. The following flow rates are set during commissioning: Permeate 600 l/h, concentrate 200 l/h, corresponding to a yield of 75%. 3. permeate tank and ozonisation: The unpressurised 500 l permeate tank has an adjustable level control. For treatment with ozone, the water in the permeate tank is circulated via an adjustable ozone feed point. The ozone is generated from air in the ozone generation system by means of a silent electrical discharge and is available as an ozone-air mixture. The air and the undissolved ozone rise upwards in the permeate tank and are discharged via the residual ozone destroyer. A redox potential and ozone measurement is carried out after the centrifugal pump for monitoring purposes. The ozone dosage is set via the touch panel. You can choose between regulation via the redox potential or the ozone concentration. Additional title: Water softening, reverse osmosis system, ozone sterilisation Permeate output: 600 l/h Concentrate output: 200 l/h Ozone output: 5 g/h Max. working pressure: 16 bar Current: 2 A Voltage: 230 V Frequency: 50 Hz Water: < 5 bar (cooling water) Compressed air: 5,5 - 6,5 bar (max. 10 bar); max. 0,37 Nm³/h Operation / Control: Simatic S7-300, Touch Panel Djdsw Uvdgspfx Ai Eekw Position: free standing Base construction: Fully mounted on tubular frame with spherical feet Features: Reverse osmosis unit, reaction tank complete with residual ozone destroyer, ozone generator, ozone gas warning device, ozone and redox sensor, switch cabinets with control unit

Condition: new, Year of construction: 2017, Gas flame treatment system Arcotec FTS 4005 DR som, manufactured in week 42 of 2017. The machine is new and unused and has CE certification. Operating voltage: 400V, power: 7kW. The gas type is preset to propane, but natural gas can also be used. Burners: 4x MB3-500S/2E. The materials that can be treated are metal sheets. Dkjdped Rik Ajfx Ai Ejw The gas flame treatment system is intended exclusively for the thermal pre-treatment of metal sheet surfaces in order to improve the adhesion of printing inks, lacquers, adhesives, foam, etc. The machine cost over €200,000!

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 12 bar, operating pressure: 12 bar, overall weight: 2,000 kg, compressed air connection: 6 bar, Equipment: documentation/manual, RIEFILT Ultrafiltration System UF 25/10 – 25 m³/h High-Performance UF for Industrial, Process & Drinking Water Compact, fully automatic ultrafiltration system for the treatment of river, well, or process water with a capacity of up to approx. 25,000 l/h. The UF 25/10 reliably removes suspended solids, bacteria, microorganisms, and colloids, providing consistently clear filtrate—ideal as a stand-alone treatment unit or as a high-quality pre-treatment stage for RO systems. Typical Applications - Process water treatment in industry and commercial sectors - Filtration of river, surface, and well water - Premium pre-filtration for reverse osmosis systems (extends RO membrane service life) - Drinking water purification for industrial, municipal, or containerized solutions - Recirculation and polishing of industrial and rinse water Wherever secure water quality, high availability, and stable operating costs are required, this system excels. Technical Specifications (Summary) - System type: RIEFILT UF 25/10 - Capacity: up to approx. 25 m³/h raw water, approx. 23.5 m³/h nominal capacity - Membranes: 10 × PVDF ultrafiltration modules - Operating pressure: approx. 1–3 bar (energy-efficient low-pressure operation) - Temperature range: approx. 0–40 °C - Power consumption: approx. 12.5 kW (base), approx. 15 kW incl. CIP module Dkodpfx Aiewnbxde Eew - Design: Stainless steel skid, industrial-grade piping and tanks - Designed for automated continuous operation, containerized, and modularly expandable System Concept & Operation - Pre-assembled skid system—plug & play, quick integration into existing setups - Automatic backwashing and CIP cleaning for minimal downtime - Freely programmable control, user-friendly operation, and clear process visualization - Low chemical consumption, optimized membrane lifespan, robust industrial construction Benefits for the Operator - High operational reliability: stable filtrate quality even with fluctuating raw water quality - Reduced OPEX: energy-efficient operation, automated cleaning, minimal personnel requirements - Flexible integration: as a stand-alone solution or high-end pre-treatment stage for RO / further processes - Future-proof: ideal for system expansions, container concepts, rental or multi-line solutions If interested, I am happy to provide the detailed technical datasheet, layout drawings, and a customized offer tailored to your application, including pricing and delivery terms. Please contact me directly via Machineseeker for further information, project discussions, or to arrange a viewing.

Year of construction: 2026, condition: new, functionality: fully functional, FTS 15-60 is a compact and heavy steel structured trucked plant with three-decks screen. Also integrated with tracked moving system and robust structure. Works via conveyor belt system. The fully electrically driven plant is designed in a variety for maximum capacities and suitable for feeding materials with a maximum edge length of 200 mm. All functions, as well as subsequent and previous crushing plants, conveyor belts, etc. are electrically lockable. • Production capacity: 500-600 TPH • Screen dimension: 1550x6100mm • Mobile three-decks screen • Diesel electric drive • Classifier screen plant up to 4 final fraction sizes Dsdpfx Aj Aigfksi Ejkw Maximum feeding size 100 x 160 mm

Condition: like new (used), Year of construction: 2020, operating hours: 2 h, functionality: unexamined, machine/vehicle number: HY-1000LPH, input voltage: 220 V, total height: 2,000 mm, total width: 1,000 mm, total length: 2,300 mm, energy consumption: 4 kWh, Equipment: documentation/manual, Reverse osmosis unit, purchased in 2020, and only tested once in 2024. Dkodpfx Aez Iqrnoi Eow The machine is being sold as is.

Condition: good (used), Wastewater treatment plant, drilling water purification, chip separator, paper filter, paper belt filter -Tank dimensions: 1000/700/H800 mm Dkodpfx Aiob A Ngps Eew -Agitator: 0.75 kW -Speed: 1500 rpm -Equipment: as shown in pictures, conveyor belt filter/agitator -Dimensions: 1100/710/H1650 mm -Weight: 130 kg

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total height: 4,500 mm, total width: 7,200 mm, total length: 8,500 mm, temperature: 35 °C, energy consumption: 300 kWh, Equipment: documentation/manual, For sale are three unused heat pump vacuum evaporators from Blue Water Plants, manufactured in 2020. The units were delivered for concentrate thickening at a biogas plant in southern France, were preserved at the factory, and have never been operated productively. The evaporators can be purchased individually or as a package. Scope of delivery: 1x Main evaporator, distillate output approx. 55 m³/day 2x Evaporator Type 12,000, distillate output each approx. 12 m³/day Total capacity in combination: up to approx. 79 m³/day Operating principle: The evaporators operate under vacuum at a low boiling temperature. An integrated heat pump recovers the evaporation heat, which is why the energy requirement is significantly lower than with conventional thermal evaporation. The wastewater is separated into two streams: a distillate with low residual load and a thickened concentrate with a greatly reduced volume. An integrated acid reaction binds ammonia as an ammonium sulfate solution. This solution can be used as a liquid nitrogen fertilizer. Typical applications: Biogas plants: Treatment of fermentation residue and digestate, recovery of nitrogen as ammonium sulfate fertilizer, reduction of storage and application volume Composting and waste treatment plants: Thickening of leachate from storage areas and composting processes Agriculture: Volume reduction of slurry and storage basin water, nutrient recovery Food and beverage industry: Thickening of organically contaminated process wastewater, for example from dairies, breweries or juice and vegetable processing Concentrate treatment: Further thickening of concentrates from reverse osmosis or membrane filtration with organic and nitrogenous loads Reduce disposal costs: Instead of disposing of the entire wastewater externally, only the thickened concentrate is now disposed of. The distillate can be reused or discharged after further treatment. Not suitable for: The evaporators are designed for organically and ammonium-contaminated wastewater. They are not intended for saline water such as seawater, brine, drilling fluids, reservoir water or heavily chloride-contaminated industrial wastewater. High salt and chloride loads lead to crystallization and scale formation on the heat exchanger surfaces and increase the risk of corrosion. For such applications, RIEFILT offers suitable alternatives on request. Note on distillate quality: Depending on the inflow, the distillate may contain residual levels of ammonium and COD. For discharge or reuse, RIEFILT offers suitable post-treatment via reverse osmosis. Peripherals (optional): Acid module 20 m³ (H2SO4), pH reactors, adiabatic cooling tower 47 m³/h Documentation: Process flow diagram incl. tank, pump and dosing list, technical documents and CE conformity declarations. Photos available on request. Djdeyr H Anepfx Ai Eekw Conditions: Sale exclusively through RIEFILT GmbH. EXW South France, FCA/DAP on request. Inspection by appointment. Price on request.

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: AC, overall weight: 5,180 kg, workpiece weight (max.): 1,800 kg, input current: 46 A, input voltage: 400 V, C.M. Wheel Blast Machine T18 H850 (Year of Manufacture 2016) Product Description The C.M. Surface Treatment T18 H850 is a high-performance wheel blast machine for the economical surface treatment of workpieces. The machine is suitable for descaling, decoring, cleaning, and surface preparation prior to painting or coating. The rotating table system allows a wide variety of workpieces to be blasted evenly. The robust design and powerful turbine enable high processing quality while simultaneously ensuring efficient abrasive consumption. The system features an integrated abrasive processing system with separator, cyclone extraction, and filter system. This ensures that the abrasive is continuously cleaned and reused. Electrical Data Feature | Value Mains Voltage | 400 V Phases | 3 Frequency | 50 Hz Maximum Power | 27.78 kW Installed Total Power | 24.82 kW Operating Current | 45.46 A Working Area Feature | Value Max. Workpiece Diameter | 1,800 mm Max. Workpiece Height | 850 mm Max. Workpiece Weight | 1,800 kg Wheel Feature | Value Power | 7.5 kW Wheel Diameter | 334 mm Number of Blades | 6 Peripheral Speed | 30–70 m/s Abrasive Feature | Value Usable Grain Size | 0.1–2.0 mm Maximum Hardness | 62 HRC Initial Filling | 1,500 kg Djdpfxoz I Iv Ro Ai Eskw Average Consumption | approx. 500 g/kWh Filter System Feature | Value Suction Capacity | 60–150 m³/min Compressed Air Consumption | 7.2 Nm³/h Filter Area | 75 m² Filter Weight | 1,100 kg Machine Weight Feature | Value Machine Weight | 5,180 kg Unladen Weight (Base Machine) | 4,080 kg Noise Level Feature | Value Sound Pressure Level (Leq) | 83 dB(A) System Components The system consists of: Cabin with rotating table Wheel Sieve Bucket elevator Separator Extraction system with cyclone Filter system Control panel / electrical system Application Areas Descaling Decoring Cleaning of steel components Surface preparation Removal of scale Preparation for painting or powder coating Shot blasting Special Features Rotating table blast machine for large workpieces Closed abrasive system Automatic abrasive processing Integrated dust extraction with cartridge filter Robust industrial design Suitable for workpieces up to 1,800 kg

Year of construction: 2026, condition: new, FABO Mobile Scalper screen is produced for aggregate producers who require higher productivity and versatility. The machine can be used for multiple purposes; it can be used as a heavy-duty incline 2 deck screen, capable of stockpiling, scalping before and after crushing units, or it can be used a standalone system as well. That is why FABO tracked mobile scalpers can separate the hardest materials. FABO Mobile Scalpers helps our customers to maximize productivity while on the other hand helps on reducing the production costs. - Dkjdpfx Aszfp Dasi Eow - - Technical Specifications of the Tracked Scalper Screen: - *Bunker capacity :7m³ - *Production capacity : 220 – 400 Tons per hour - *Vibrating Screen Size : 1530x4800 mm - *Total Power : 110 kvA - *Screen Media : Punch Plate, Grizzly, Bofors - *Weight : 31.000 kg - *The screen angle varies between 18-27°.

Condition: used, Year of construction: 2017, COMPLETE HOOKAH TOBACCO PACKAGING PLANT - TWO LINES + MIXING EQUIPMENT Fixed package: two complete, lightly used hookah (shisha / molasses tobacco) packaging lines with all support equipment, sold together as one lot at one price: - 50g line: up to 120 packs per minute, built 2017, European (mainly Italian) machinery - 250g line: up to 40 packs per minute, built 2018, U.S. and European machinery - Barrel mixing, barrel loading and storage equipment, spare parts and dosing screws Each line runs from bulk tobacco feeding through dosing, flow-pack sealing, check weighing, cartoning and film wrapping. The lines were used from 2017-2018 to 2019 and have been idle since 2020. Location: Gaithersburg, Maryland, USA. Available for inspection by appointment. Reason for sale: the owner stopped plans for U.S. tobacco production because of FDA regulatory requirements. The equipment is not being sold because of any fault. LINE 1 - 50g LINE - UP TO 120 PACKS PER MINUTE (BUILT 2017) 1. Main control cabinet (HMI + PLC) - synchronizes the complete line 2. Manual loading table and feed hopper with twin augers 3. Dosing machine - GB Automazioni (Italy), screw/auger dosing 4. Horizontal flow-pack machine - sealed 50g pouches 5. Inline checkweigher 6. Cartesian robot loader 7. Stepper (indexing) conveyor 8. Case box machine (cartoner) with its own control panel 9. Carpet transfer conveyor 10. Box wrapping machine - film overwrap of each carton 11. Superimpose box unit - carton grouping and stacking 12. Case cross box machine - GB Automazioni (Italy) 13. Overwrapping cross machine - film overwrap of carton bundles 14. Roller exit conveyor LINE 2 - 250g LINE - UP TO 40 PACKS PER MINUTE (BUILT 2018) 1. Material feed hopper 2. Dosing machine - GB Automazioni (Italy) 3. Horizontal flow-pack machine - Delfin 4. Inline checkweigher - Mettler Toledo 5. Stepper conveyor 6. Case box machine (cartoner) 7. Carpet transfer conveyor 8. Box wrapping machine - Barrington Packaging Systems (USA) MIXING AND STORAGE EQUIPMENT (INCLUDED) - 2 barrel mixing / tumbling machines with control panels - Barrel loading machine (lift and tipper) - Blue storage barrels - Stainless steel storage tubs with lids SPARE PARTS (INCLUDED) - Interchangeable dosing screws in several sizes (for setting pack weight) - Spare parts and stainless steel fittings ELECTRICAL AND UTILITIES - 50g line: 220V / 60Hz, 3-phase + PE, approx. 22.5 kW total across 7 supply points (see layout drawing) - 250g line: electrical details available on request Dedpfoz Rtwaox Ai Ejkw - Pneumatic components: compressed air supply required - The equipment has been operated on U.S. 60Hz power DOCUMENTS AVAILABLE - Brochure for each line - 50g line layout drawing with power supply schedule - Additional photos - Videos of the lines running in production and recent walk-arounds PRICE AND TERMS - USD 550,000 for the complete package as described (both lines + mixing and storage equipment + spare parts) - Sold as-is, where-is (EXW Gaithersburg, Maryland) - Buyer arranges rigging, crating and shipping unless otherwise agreed - Inspection welcome: in person, by video call, or by a third-party inspector

Condition: used, Year of construction: 2015, operating hours: 35,000 h, functionality: fully functional, machine/vehicle number: HS6434, path measurement accuracy: 620 mm, type of input current: AC, total width: 620 mm, total length: 3,820 mm, total height: 700 mm, overall weight: 300 kg, input voltage: 230 V, The Cox & Plant HS6434 is a high-performance, industrial-grade electromagnetic vibratory conveyor designed specifically for the hygienic handling of bulk solids, particulates, and fragile products. Manufactured in 2015, this unit represents the pinnacle of Cox & Plant’s specialist engineering in efficient, low-maintenance food and chemical processing technology. Utilizing a precise 6mm stroke amplitude driven by heavy-duty electromagnetic coils, the system offers instantaneous start/stop control and eliminates the mechanical wear components (like belts, bearings, and eccentric drives) common in traditional conveyors. Dedpfxszz Ax Aj Ai Ejkw

Condition: excellent (used), 1 x Oddy Novatek 2 Roll Plant Dkedjy Hk Dajpfx Ai Eow

Condition: used, Year of construction: 2017, functionality: unexamined, machine/vehicle number: VAN18-0015, power: 995 kW (1,352.82 HP), EX Diageo 2017 BINDER / HERZ Biomass-Fired Steam Boiler Plant – Complete System Dedpfx Asz Ik Aaei Eekw Boiler capacity: 995 kW, as stated on the manufacturer’s nameplate. Complete industrial biomass steam generation plant available from Rosemaund Farm Distillery in Herefordshire, UK. Installed and commissioned in 2017 and formerly operated as part of the Chase Distillery site during its period of Diageo ownership. The plant is now surplus to requirements following a change in production strategy. The installation is offered substantially complete and includes: • BINDER / HERZ biomass-fired steam boiler plant • Hydraulic walking-floor fuel hopper • Screw and inclined fuel conveyors / auger stoking system • Economiser • Flue gas and ash collection equipment • Ash removal conveyors and collection system • HERZ / BBSM plant control panel • Flue, fans and associated fittings • BYWORTH insulated steam accumulator, approx. 23m³ • Water treatment equipment • Steam blowdown vessel • Condensate recovery unit • Hotwell and associated pipework/platforms Boiler reference: VAN18-0015 Year: 2017 Steam accumulator: BYWORTH M847, 2018 The plant remains installed and can be inspected by appointment. An independent engineering inspection and functional test can be made available to serious purchasers. Sale basis: Ex-works, Herefordshire, United Kingdom. Purchaser to arrange dismantling, loading and transport. Full technical information, photographs and further documentation available on request.