Used Profile Bender for sale (6,520)

Condition: used, Year of construction: 1993, Technical details: throat: 220 mm number of strokes: 24 Hub/min height of stroke: 100 mm Punching capacity: 800 (80 to) kN round bar steel: max. Ø 30 (scheren) mm square edge steel: 28 (scheren) mm angle steel: 90°/45°: 110 x 10 / 65 x 8 (scheren) mm flat steel: 180 x 18 / 350 x 16 (scheren) mm knife length: 360 mm hole diameter: Ø 30 x 20 mm (stanzen) mm plate thickness: max. 13 (ausklinken) mm total power requirement: 5,5 kW weight of the machine ca.: 1,3 t dimension machine xH: 1,3 x 0,7 x 1,85 m Hydraulic flat, profile and bar steel shears with hole punch, notcher Application: Shearing - notching - punching Shears: with stop L:280 x W:60 xH:12.5 mm Table size WxD: 280 x 440 mm Working height: 760 mm Punching: Table size W: 280 x D: 280 mm Material support W: 538 mm x D: 328 mm x D: 10 mm Working height: 1120 mm with scraper Notching: Table size W: 450 mm x D: 310 mm x D: 13.5 mm Lhjdpfx Akou Ickysqen Working height: 1115 mm Hydraulic pressure 260 bar, 50 liters Hand control / foot control *

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 3,358 h, machine/vehicle number: K22268, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: JORNS, working width: 6,410 mm, folding beam adjustment: 200 mm, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 2 mm, back gauge adjustment: CNC-controlled, back gauge: 1,250 mm, back gauge speed R-axis: 283 mm/s, back gauge travel distance R-axis: 1,250 mm, back gauge travel distance Z-axis: 1,250 mm, overall weight: 13,000 kg, total length: 8,500 mm, total width: 3,354 mm, total height: 1,938 mm, input voltage: 400 V, input current: 80 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, emergency stop, foot remote control, We offer this used Jorns JDB-150G-DP-1250-JC100-6.4-dsp panel bending machine for sheet metal, manufactured in 2023. Year of manufacture: 2023 Model: JDB-150G-DP-1250-JC100-6.4-dsp Rated current: 80 A Operating voltage: 3 × 400 V Frequency: 50 Hz Control voltage: 24 VDC Maximum hydraulic pressure: 210 bar Maximum pneumatic pressure: bar Lodpsz Dilljfx Akqjhn If you have any questions or need further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1988, - The machine was purchased new in 1988 and has been in our possession ever since. - The visual condition can be seen in the photos. Considering its age and the existing paint condition, the mechanical condition is satisfactory. - The machine is operational and can be demonstrated by prior arrangement. - The machine has been technically modified. This provides a second, higher speed for processing smaller pipe dimensions. - A protective frame has been manufactured to protect the machine, which helps to minimize external damage. The protective frame also has two mounts that can be used to prepare or mount various profiles. - The control panel has been expanded. As a result, up to 10 set values can now be pre-programmed. - The existing standard tools are included with the machine. All arbor diameters are 60 mm. - The original operating manual is available. - The scope of delivery includes a comprehensive selection of tools for various applications, including: Round tubes Flat bars for heavy and light arbors Square profiles Rectangular tubes T-profiles Angle irons Diagonal tools - A total of 15 pallets of tools belong to the machine (see photos and description). - The machine will only be sold together with the complete set of tools. Lhedjz Hcp Njpfx Akqsn - The price is ex works. The dismantling, loading, and collection of the machine must be carried out by the buyer himself or by a commissioned forwarding agent. Technical specifications according to available documentation. Subject to prior sale.

Condition: used, Technical details: bending angle max.: 180 ° Lhjdpfx Akexu Dxqsqsn working height: 350-550 mm operating voltage: 380 V revolutions per minute: 10-20 U/min number of bars max.: 1-4 mm total power requirement: 1,3/2,1 kW Weight approx.: 690 kg dimension machine xH: 1,2 x 0,87 x 1,2 m -Two plate speeds -Mode selector switch for automatic mode, jog mode, continuous operation -Four continuously adjustable counterholder bars without accessories! *

Condition: used, Year of construction: 2000, We offer used Nikon V-12 profile projector, year of construction 2000. Manufacturer: Nikon Model: V-12 Serial number: 277120 Country of manufacture: Japan Lhjdpfxez Tdmds Akqen Objective magnification: 20x, 50 x, 200x If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 1978, Equipment: documentation/manual, emergency stop, foot remote control, I am offering an electro-hydraulic profile bending machine, purchased in 2012, manufactured by Roundo AB, Sweden, type: R-7S (used, workshop-inspected, and partially refurbished with standard configuration, including vertically arranged bending axes, for sale. It is fully operational and can be demonstrated under power after prior consultation. - Control panel on the swivel arm with joysticks and switches - Digital displays for the two side rollers Significant added value: Extensive tool and profile package included! To be able to handle customer orders in an even more flexible and individual manner, significant investments have been made in expanding the range of tools. In addition to the standard tools, you will receive: • 36 additional rollers for a wide variety of profiles. • Special tool for flat and light-duty profiles up to a height of 500 mm. • Tools for square and rectangular tubes. • Tools for various round tubes Ø (88.9 + 114.3 + 139.7 + 168.3) mm. This machine is designed according to the latest findings in the tube and profile processing industry (as of 2012). The fixed bending roller is equipped with an adjustable slip clutch, which automatically adjusts the speed of the bending roller to the workpiece being bent. The three bending axes are mounted on oscillating roller bearings. A set of complete universal bending rollers for bending angle and T-sections with flange facing inwards and outwards, flat sections upright and lying flat, and square material. The rollers are made of wear-resistant and hardened steel. They consist of three adjustable rings, allowing various profiles to be rolled. Two independently adjustable guide rollers, which can be adjusted fully hydraulically on three different axes. The guide roller unit is equipped with small, interchangeable rollers. This allows asymmetric profiles to be held flat. This is especially necessary for angle sections with the flange facing inwards. Maximum pressure valve to prevent machine overload. Thermal overload protection for both electric motors. Main switch, emergency stop switch, 24 V transformer, equipment according to UVV standards. Multi-button switch mounted on the swivel arm for operating the machine. A set of keys and tools including operating manual in German. In practice, it has been shown that the quality of bending angle steel with the existing standard roller sets leads to limited results. Extensive investment! Lodpfx Aoz Nhliekqohn In recent years, important core components of the hydraulic system have been professionally renewed. The execution of the work is fully documented with existing invoices: • 2021: All hydraulic hoses were completely replaced. • 2022: As part of an oil leak repair, a brand new Bauer hydraulic motor was installed. The total cost for the motor including professional installation amounted to approximately €21,000 net. • Proof is available for the hydraulic motor: Test Certificate for Hydraulic Motors, Certificate of Conformity, Manufacture Certificate, and invoices. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The dismantling, loading and collection must be organized and carried out by the buyer himself or by a freight forwarder commissioned by him. • Technical specifications according to existing documents. Subject to prior sale.

Condition: ready for operation (used), Year of construction: 1984, machine/vehicle number: No.317, No.327, functionality: fully functional, operating hours: 40,000 h, grinding height: 130 mm, grinding length: 250 mm, grinding spindle speed: 3,300 rpm, grinding width: 100 mm, table length: 400 mm, table width: 225 mm, Equipment: rotational speed infinitely variable, For sale are 2 (two) sets of optical profile grinding machines Wasino type GLS-130AS, with Fanuc control, made in Japan in 1984. 1 machine is full working condition, there are videos of spindle runout and positioning X,Y accuracy measurements. Second machine serial No.327 is the same working condition, just factory worker could not start it up for us, was worked more then 1 year ago. There are accessories, tools and technical documentation for each machine. Lsdowh Udtepfx Akqshn For 1 machine Wasino complete with accesories and tools, price is 18500 euro EXW stock. Preferable to sell as package 2 machines together.

Condition: used, Year of construction: 2012, Number of spindles 4 St. Number of tools variabel St. Spindle diameter 50 mm Spindle length 320,320,320,160 mm WEINIG UNIVAR 12 NC AUTOMATIC PROFILING AND MILLING MACHINE ----- Machine can still be seen in operation! Includes mechanization/handling equipment. For milling the perimeter of windows, doors, and similar items with non-uniform (varying) profiles. For profiling individual components. PROCESSING UNITS ----- 1. Profiling Spindle ----- Motor power: 11 kW (15 hp) Spindle diameter: 50 mm Spindle speed: 6000 rpm Tool clamping length: 320 mm Number of tool positions: variable, infinitely adjustable via NC Radial and axial adjustment: NC-controlled axes Synchronous feed device with automatic plunge function 2. Profiling Spindle ----- Motor power: 11 kW (15 hp) Spindle diameter: 50 mm Spindle speed: 6000 rpm Tool clamping length: 320 mm Number of tool positions: variable, infinitely adjustable via NC Radial and axial adjustment: NC-controlled axes Lhedpfx Ae Aa A Irjkqon 3. Profiling Spindle ----- Motor power: 11 kW (15 hp) Spindle diameter: 50 mm Spindle speed: 6000 rpm Tool clamping length: 320 mm Number of tool positions: variable, infinitely adjustable via NC Radial and axial adjustment: NC-controlled axes Profile Milling Unit (vertical, right-hand side) at the end of the machine ----- Spindle diameter: 40 mm Tool clamping length: 160 mm Axial adjustment with 8 positions Radial indexing with 8 positions for profile milling Includes: ----- Mechanization/Handling system Control System: ----- AALTRONIC (Technical specifications as provided by the manufacturer – subject to change/no guarantee!)

Condition: used, Used beam cambering and straightening machine from BAKKER Capacity: 200 tons Includes several tools ----- Used beam bending machine from BAKKER Capacity: 200 tons Includes various attachments #Stierli-Bieger #Voortman #Busschers #Dynobend Lsdpfxe Aazwfs Akqehn

Condition: like new (used), functionality: fully functional, Year of construction: 2017, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, PIPE BENDING MACHINE WITH ERCOLINA MANDREL, MODEL TOP 030, THREE-PHASE, WITH MANDREL + ERCOLINA AUTOMATIC LOADER, MODEL 030 A3 H76 Machine in like-new condition, CE certified Minimum outer diameter: 10 mm Maximum outer diameter: 76 mm Maximum bending radius (CLR): 200 mm Minimum bending radius (CLR): 20 mm Maximum bending angle: 210° Installed power: 4.2 kW Tank capacity: 15 l hydraulic oil Noise level: 65 dB Dimensions (Length x Width x Height): 4000 x 950 x 1250 (3 m) Weight: 850 kg (3 m) Lhsdpfjz Nf Dcox Akqjn FEATURES •FST closing system (Patented) with an auxiliary system for stabilizing the hydraulic pressure of the sliding carriage. •Display screen for digital visualization of the carriage’s forward movement (Y1 axis) and rotation (B axis). •External pressure gauges to facilitate system setup and closing pressure adjustment. •Variable bending speed up to 4 rpm. •3-meter mandrel bench. •Pneumatic spindle.

Condition: used, Punching Machine MUHR & BENDER - MUBEA Type KL 350 / 203 Machine No. Year of manufacture 19 Punching force 35 tons Throat depth 203 mm Ram stroke 22 mm Capacity Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate 117 x 70 mm Table plate 175 x 100 mm, thickness 100 mm Drop-through opening in table cutout Ø 56 mm Stroke release Single stroke via foot switch Lodpfsyvvkwsx Akqjhn Motor power 1.5 kW Power supply 400 Volt, 50 Hz - Electric foot switch for stroke release - Manual lever positioning device for punch movement - Equipped with a Ø 8 mm punching tool - Support tables approx. 270 x 230 mm each on left and right of punching unit - Metal base frame Space requirement L x W x H 750 x 720 x 1500 mm Weight 430 kg In very good condition

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 8481-05-K951, Edge finishing with fine grinding Ljdpfx Akozv Eaxsqohn We used this machine to process stair treads. 6 processing units: 1 x coarse grinding of the surface 2 x fine grinding of the surface 3 x profile milling on the top 4 x profile milling on the bottom 5 x profile grinding on the top 6 x profile grinding on the bottom Automatic feed – speed can be adjusted continuously Material thickness sensor The machine is equipped for processing stair treads with an edge rounding of r=8mm on the top and bottom (individually controllable). After cutting the treads to size on the circular saw or CNC machine, we completed the processing of the treads in a single pass from the top and bottom. The machine can also be adapted for other profiles, radii, or milling operations.

Condition: used, Year of construction: 2004, machine/vehicle number: 2161, For sale is a Schüco LKF 2600 machine for processing aluminum and steel profiles, manufactured in 2004. The machine is particularly suitable for the efficient processing of long profile lengths. The 3-sided processing over a processing length of 2,600 mm allows complex milling patterns to be incorporated into door and frame profiles without having to remove the profile from the clamping device. The pneumatic profile clamping system with four adjustable clamping cylinders ensures secure fixation of the profiles during processing. The pneumatic 180° rotation allows the profile to be conveniently positioned for processing the opposite side. A special advantage of the machine is the pneumatic rotation of the clamped profile by 180°. This allows processing on multiple sides to be carried out comfortably and precisely. Ljdpfx Akjz Spttoqehn Technical data: • 3-sided processing with a processing length of 2600 mm. This allows the operator to mill the milling pattern, e.g., of a 5-point locking mechanism, into a door profile without having to remove the profile from its clamping device. • During processing, the speed of the milling cutter can be adjusted to the profile. • 1 vertical milling spindle • Pneumatic rotation of the profile by 180° • All intermediate angles can be adjusted via a clamping device • Pneumatic profile clamping with 4 adjustable horizontal clamping cylinders • The working head is lowered manually and pneumatically fixed at the working height • Copying templates along the entire length of the machine

Year of construction: 2005, condition: good (used), functionality: fully functional, machine/vehicle number: 8382, 2-head welding machine for PVC profiles Ledpfxjzdq Tte Akqshn

Condition: used, Grinding spindle drive: 0.5HP, drive: Vibration-damped electric motor, power transmission: Endless woven flat belt, grinding carriage oscillation rate: 55 or 109 strokes/min, continuously adjustable oscillation stroke: 0-3⅛in, max. oscillation stroke: 79.375mm, pantograph ratio: 50:1, profile reduction: Factor 50, lateral clearance angle: ±10°, front clearance angle: 0-35°, an on-site inspection is possible. Lsdpfx Ae Adt Hgokqohn

Condition: used, Width: 60 cm Complete roll forming line equipped with tools for the production of a new type of industrial gutter for galvanized steel/stainless steel Lodoz R S T Uopfx Akqshn CE compliant Uncoiler capacity: 2 metric tons Maximum width: 600 mm Coil inner and outer diameters: 508–920 mm Hydraulic claw extension: 460 > 640 mm 4 kW Roll Forming Line Type H 18 stations Maximum width: 600 mm Maximum thickness: 0.8 mm Shaft diameter: 60 mm Maximum center-to-center shaft distance: 300 mm Siemens Simatic touchscreen control + Ethernet connection 7.5 kW Hydraulic shear Force: 5 metric tons Condition: machine has seen very little use Online auction of metalworking machines, woodworking machines, overhead cranes, workshop equipment, and lumber inventory, including an AMADA Arcade 210 CNC punch and nibbler, MAZAK VTC-41L and MT-V-515 vertical CNC machining centers, MAZAK Super Turbo-X 48 Mk II CO₂ laser cutting machine, BYSTRONIC Byjet 4022 CNC waterjet cutting machine, TECNOMA profiling and roll forming machines, ELUMATEC and EMMEGI aluminum sawing machines, HACO ERMS 200-metric-ton CNC press brake, ADIRA CNC press brake, LEFORT C 265T hydraulic scrap baler/shear combination, ESAB Pegasus CNC plasma cutting machine, GEMA powder coating machine with drying oven and exhaust system, EURO-MAC punching and nibbling machine, various KONE and DEMAG overhead cranes, VECOPLAN industrial shredder, NEDERMANN filter unit, METORA band saw, various metalworking and woodworking machines, panel saws, edge banders, milling machines, drills, compressors, workbenches, teak beams, sawn logs, and various accessories, etc. The online auction opens Wednesday 14 October and closes Tuesday 24 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 17 November Pickup days are on: - Tuesday 1 December - Thursday 3 December Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Year of construction: 2016, A versatile 2 head edge sander for solid timbe, mdf, chipboard, etc Lodpfozd Uzhsx Akqshn 1 - 80mm wide x 2450mm sanding belt with 2 speeds 700 / 1400rpm x 1.0 / 1.5kw with timed entry / exit, mechanical oscillation, and pneumatic belt tensioning 2 - Abrasive wheel sanding unit with automatic compensation for wear Sanding units can be used vertically or horizontally and have mechanical digital readouts for setting Manually adjustable top pressure beam with rubber rollers Track feed with variable feed speeds 1 - 18m/min Touch screen controller Year - 2016 CE.

Condition: good (used), The ALFRA PSG 5+ profile rail cutting device was manufactured in 2015 and is equipped with a hydraulic attachment. The length stop enables precise, repeatable cutting of profiles. An ALFRA 120 electro-hydraulic pump is connected to the hydraulic attachment and is included in the offer. The workbench is also part of the package. The device has been function-tested and has an electrical inspection performed by an electrical company. Ledsz N Smdjpfx Akqjhn

Condition: used, Year of construction: 1991, Optical Profile Projector PRAZIS PO-400-VD Year of construction: 1991 Useful table dimensions: 260 x 240 mm Scale axis X - Y + scale on W axe Diameter of the projection disc: Ø 400 mm Supplied with: 1 optical magnifier 10 x 1 optical magnifier 20 x Lodpfx Akoz H Iw Soqjhn 1 optical magnifier 50 x Length: 1000 mm Depth: 900 mm Total height: 1700 mm Weight: approx 400 KG

Year of construction: 1991, condition: reconditioned (used), Mubea / Muhr and Bender BB 032 P200: Lhsdpsium Eujfx Akqen - rebar bending machine with electr. steering - Saving of bending programs with up to 10 different angle sizes - Memory for up to 200 bending programs Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible.

Condition: good (used), Year of construction: 2002, I - beam section - flat steel 120 x 20 (d 750) mm I-beam section - upend 60 x 10 (d800) mm L-beam 50 x 5 (d 1200) mm bar material - diameter 35.0 (d 800) mm bar material dia. max. 70 x 3.0 (1200) mm 50.0 mm diameter of upper rolls 155 mm diameter of lower rolls 155 mm Stroke length 150 mm Rotating speeds 9.0 U/min total power requirement 1.3 kW weight 305 kg range L-W-H 900 x 700 x 1500 mm Lsdpfsz S U T Sjx Akqjhn Features: - Robust electric-motor-driven ring/profile bending machine - Machine base frame with rear storage shelf - Can be used in both horizontal and vertical orientations - Equipped with a wide variety of roller sets * Split roller segments * Pipe rollers - Electro-hydraulic feed of the upper roller - Manually adjustable side/alignment rollers - 1 freely movable control panel - Base frame with forklift pockets * For easy transport

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 15 h, machine/vehicle number: 121282, BENDMAK PRO 120 – Hydraulic three-roll profile and tube bending machine | 2024 | only 15.5 hours of use We offer a nearly new hydraulic three-roll profile and tube bending machine, BENDMAK PRO 120, manufactured in 2024. The machine has been used only minimally. The control system currently shows only 15 hours and 27 minutes of machine operating time and 31 hours and 14 minutes of hydraulic operating time. Operating times can be verified directly on the machine's display – see photos. The machine is fully functional, in very good technical condition, and ready for immediate use. The sale includes an extensive set of interchangeable rolls/tools for bending various profiles and tubes, as shown in the photos. Technical data: Manufacturer: BENDMAK Model: PRO 120 Year of manufacture: 2024 Serial number: 121282 Machine operating hours: 15:27 h Hydraulic operating hours: 31:14 h Type: hydraulic three-roll profile bending machine Shaft diameter: 120 mm Working roll diameter: 390 mm Motor power: 11 kW Power supply: 400 V / 50 Hz Weight: 4,720 kg CE Equipment and accessories: hydraulically controlled lower rolls hydraulic side guide rolls drive for all three rolls Lodpfx Akjzzkvpjqehn separate mobile control panel touchscreen display multiple sets of interchangeable rolls/tools for various profiles and tubes accessories shown in the photos are included in the sale The machine can be inspected and demonstrated in operation on-site.

Year of construction: 2013, operating hours: 6,044 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1400040693, CNC-profielbewerkingsmachine met 4 assen: - Bouwjaar 2013 - Draaiuren: 6.044 uur - Bewerkingslengte: 7,6 m - Gereedschapsset De machine kan ter plaatse in werking worden getoond; demontage is voor rekening van de koper. Machine komt beschikbaar begin decemeber 2026. Lodpfjz Eqxcsx Akqshn

Condition: good (used), Year of construction: 2000, I - beam section - flat steel 100 x 15 (d 400) mm I-beam section - upend 60 x 10 (d 500) mm L-beam 50x50x6,0 (d 600) mm round material 35.0 (d 500) mm bar material dia. max. 70 x 1.5 (d 1500) mm square material 50x50x3.0 (d 1400) mm bending speed 8.5 U/min Lhedpfxoz S U Uce Akqen roll diam. toproll 152 / 162 mm bore 40.0 mm Stroke length 120 mm voltage 400 V total power requirement 1.1 kW weight 470 kg range L-W-H 900 x 600 x 1100 mm Original price with accessories: approx. 10.000 euros Features: - Two driven rollers (lower rollers) - Manual feed of the upper roller - Horizontal and vertical working positions - Shafts mounted with tapered roller bearings - Lateral, manually adjustable stop rollers - 1 set of standard rollersâ??split - 1 sets of tube rollers - 1 freely movable control unit - Operating instructions

Year of construction: 1978, condition: used, We offer this used Doebeli OP 125 optical profiling machine, model OP 125x102, manufactured in 1978. Machine number: OP 125x102 Year of manufacture: 1978 Supply voltage: 380 V Lodpfoz Dg A Usx Akqjhn Frequency: 50 Hz Phases: 3 If you have any questions or require further information, please do not hesitate to send us a message or call us.