Used Profile Bender for sale (6,438)

Condition: used, functionality: fully functional, Year of construction: 2015, load capacity: 3,000 kg, Double pallet fork ISO Class: ISO Class 3 = 2,500 - 4,999 kg Technical condition: good Kdjdpfsw Dwrxox Ap Dsu Description: Year 2015 ISO 3A (51 cm) Capacity 3,000 kg Sideshift Opening range 560-1960 mm Width 1,600 mm Forks 1,150 mm ID OS1558

Condition: good (used), functionality: fully functional, Year of construction: 1992, control type: manual, degree of automation: manual, actuation type: hydraulic, shaft diameter: 100 mm, roller diameter: 300 mm, bending radius (max.): 500 mm, bending radius (min.): 500 mm, rotational speed (min.): 5 rpm, rotational speed (max.): 5 rpm, pipe diameter (max.): 115 mm, tube wall thickness (max.): 3 mm, overall weight: 2,700 kg, total length: 150 mm, total width: 150 mm, total height: 150 mm, power: 7.35 kW (9.99 HP), input voltage: 380 V, operating pressure: 200 bar, year of last overhaul: 2026, Equipment: documentation/manual, emergency stop, hardened rollers, Profile bending machine model PP100 Output shafts 100 mm fully hydraulic operated lower shafts motion independent pyramid pinch -all the 3 shafts driven with gear unit and hydraulic motor -lateral correctors left/right for guiding and align the profile, -Set of rollers complete with extra rollers to seat and bend the various shape of profiles. Kdsdpfjywhamjx Ap Dsu -7 set of rollers for pipe bending from 1,5” to 4,5” inch ( see photo in enclosed ) -Centralized control panel electric with digital position readout -Safety & emergency installation -voltage 3ph 380/50 -10 Hp -capacity chart in enclosed

Condition: excellent (used), The Formid Limited is a roll forming line with an electrically extendable support system for forming sets up to 800 mm. The drive is manual via a bevel gearbox. It can be combined into a single electric system and measures the width of the spacing. Mounted on 45 mm shafts, 12 keyways, shaft distance 145 mm. Axle spacing 250 mm. Shaft spacing minimum 200 mm from each other and 800 mm apart. Powered by a 380-volt electric motor with 15 kW. The system is suitable for profiles with frequently varying center widths. It features center roller supports to maintain the lower layer of the steel strip, which in turn supports the base strip substrate in a defined profile. The system also includes 16 stations. Kdedpfswxv Izex Ap Dsu

Condition: used, Pressure zone turret, softforming interchangeable profiles for softforming machines, double-end tenoners, edging machines, scoring motor, chipper motor, milling motor for edging machines -HOMAG softforming interchangeable profiles for softforming profiles can be quickly converted to straight edges -with heavy leadership -laterally movable -with counter -HOMAG milling unit for joint milling Kdjdpfx Ajb Uhukep Dou -with heavy dovetail guide -1x engines Perske -Motor type: -Power: 3.0/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2860/5860 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1800/1400/H1300 mm -Weight: 712 kg

Year of construction: 1998, condition: good (used), machine/vehicle number: 4422758898019, Offer 22646 Hydr. profile and bar shears with notching device and hole punching machine Technical data: - Flat steel shear - flat steel - 400 x 16 mm - or: 300 x 18 mm - Section steel shear - L- and T-iron at 90° 130 x 12 mm - square steel / round steel 40 / 40 mm - notcher - with square notcher for sheets up to approx. 13 mm Kdsdpfomb U Slsx Ap Dou - notch depth approx. 70 mm - notch width approx. 52 mm - Hole punch - punching force approx. 60 t - throat 400 mm - stroke approx. 10 to 50 mm - punches in steel up to Ø 31 in 15 mm - material stop - div. 10 pcs. punch + dies - drive 400 V / 5,5 kW - space requirement W 1100 x H 2000 x D 1700 mm - weight approx. 2100 kg

Condition: good (used), Finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -Manufacturer: Homag, profile scraper from edge banding machine BRANDT KM 36 / KM35 -Quantity: 1 piece available -Dimensions: 510/430/H570 mm -Weight: 62 kg Kdsdpfogylq Sox Ap Dsu

Condition: used, Year of construction: 1993, machine/vehicle number: 9384, Buchdeckenausbiegemaschine - Case Bender Orient CXYear 1993 - Serial- No. 9384/15344 Working width max. 500mm Online-Video-Inspection by Skype-Video Ksdpfeh Aydrox Ap Dodu We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, TECHNICAL DETAILS - Ø screen : 600 [mm] Kdjdpfouhb Nfox Ap Dsu - Strokes (X/Y) : 200 / 100 [mm] - Magnification : 10X, 20x, 50x, 100x - power max : 1 [kW] - floor space (L x D x H) : 1100 x 1720 x 2100 [mm] - weight : about 400 [kg]

Year of construction: 2002, condition: ready for operation (used), X-axis: 635mm, y-axis: 510mm, z-axis: 460mm, clamping surface dimensions: 790x560mm, max. spindle speed: 8000rpm, control: Heidenhain TNC 620, connected load: 17kVA, spindle motor drive power: 8.4kW at 100% duty cycle, length: 3290mm, width: 2920mm, height: 2650mm, weight: 3.8t, operating hours: 27,125h, spindle hours: 8668h. Equipment: SK 40 DIN69871 tool holder, 20-position tool changer, coolant system 3.7bar, DMG TS 649 electronic touch probe, Heidenhain TT140 tool measurement system, Lehmann FA-510L-485 A-axis indexing unit s/n A756, four-jaw chuck, Vischer & Bolli zero-point clamping system, chip conveyor, chip cart, workbench with hand tools, milling and drilling tools, platform trolley for the indexing unit, tools and accessories, various tool holders approx. 36 pieces, various accessories, spare parts and documentation. An on-site inspection is possible. Kedpfxezrn I Ro Ap Djdu

Condition: ready for operation (used), Year of construction: 2012, Machining length: 6500mm, equipment: fencing, control cabinet, Hagen & Göbel spindle unit, power: 5.5kW S1/7.9kW S6, speed range: 100 to 6000/min continuously variable, tool holder: SK30/DIN69871 form A, drilling capacity in steel 60/aluminium: 18/20mm, thread in steel 60/aluminium: M14/M16, spindle throat: 150mm, vertically opening protective cabin, pneumatically movable up and down, operation via push button, coolant system emulsion AP3000/6500, delivery rate: 70l/min, tank capacity: 150l, support table with T slot strips size 16, ten clamping cylinders, support surface: 6500x330mm, equipped with ten double acting pneumatic cylinders (50x40), tool changer plate magazine, travelling plate magazine for eight tools, change time: approx. 8 to 10s, max. tool holder diameter: 50mm, max. length for tool holder with tool: 250mm, Heidenhain HR130 handwheel integrated in control housing, chip tray, 6 removable chip drawers, pendulum operation for normal table, protection by light barrier, device for efficient production of series parts, machine table with separating discs for 900mm safety zone, spray mist device, tank capacity: approx. 1l, laser technology, retrofit AP6500 HK laser technology. Control: HEIDENHAIN iTNC530, length: 8000mm, width: 2400mm, height: 2450mm, weight: 4.5t, with documentation. An on site inspection is possible. Ksdpfxjzcfi Uo Ap Dsdu

Condition: ready for operation (used), Year of construction: 1985, An old but fully functional IMA double-end profiler is available. Working width: 2000mm, max. cutting height: 35mm, machine dimensions X/Y/Z: approx. 4000mm/6000mm/3000mm, weight: approx. 3000kg. Documentation available. An on-site inspection is possible. Kdedpfx Apszc Rdkj Deu

Year of construction: 1994, condition: used, Profile scraper unit, profile scraper, flat scraper unit, finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine Kedpfx Apsu Drugo Dsdu -Manufacturer: OTT, profile scraper from edge banding machine type U206 -Quantity: 1 piece available -Dimensions: 460/430/H560 mm -Weight: 57 kg

Condition: used, functionality: fully functional, load capacity: 4,000 kg, Double pallet fork ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Kdedpfxox Racaj Ap Deu Description: ISO 3A (51 cm) Capacity 4,000 kg Sideshift Opening range 560-1960 mm Width 1,200 mm Forks 1,150 mm Load stabilizer ID OS1806

Condition: used, functionality: fully functional, Year of construction: 2021, load capacity: 2,500 kg, Double pallet fork ISO class: ISO class 2 = 1,000 – 2,500 kg Condition: Ready for use and fully operational Kdsdpfx Apex Rk Rno Dju Technical condition: good Description: Year 2021 ISO 2A (41 cm) Capacity 2,500 kg Sideshift Opening range 560–1960 mm Width 1,200 mm Forks 1,000 mm ID OS1831

Condition: used, functionality: fully functional, Year of construction: 2023, load capacity: 2,200 kg, Double pallet fork Load center: 600 ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Kdsdpjzi H Nbsfx Ap Deu Description: Year 2023, ISO 2B (41 cm), Capacity 2200 kg, Side shift, Opening range 560-1960 mm, Width 1200 mm, Forks 1150 mm, ID OS1995

Condition: good (used), Year of construction: 2000, control type: NC control, controller manufacturer: Davi Smart, number of rollers: 4, roller (bottom) diameter: 340 mm, roller (top) diameter: 370 mm, side roll diameter: 320 mm, roller length: 3,100 mm, sheet thickness (max.): 25 mm, overall weight: 18,500 kg, total length: 5,900 mm, total width: 2,200 mm, total height: 2,300 mm, power: 30 kW (40.79 HP), Equipment: cone bending device, 4 roll plate bender Davi Promau - MCB-3037 MACH-ID 9751 Make: Davi Promau Type: MCB-3037 Control: Davi Smart Year: 2000 Conical bending attachment Extended roll end for section bending jobs Digital read out position side rolls Central lubrication CE-Declaration Kdjdpfx Aezi Ra Rsp Dsu Rolling width: 3100mm Rolling thickness 3x toproll Ø:20mm Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending: 22mm Top Roll Ø: 370mm Bottom Roll Ø: 340mm Side roll Ø: 320mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 30kW Length: 5900mm Width: 2200mm Height: 2300mm Weight: 18500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, Year of construction: 2021, load capacity: 5,500 kg, Double pallet fork ISO class: ISO class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully functional Technical condition: normal Description: Year 2021 ISO 4A (61 cm) Ksdpfx Apozlvmzo Dsdu Capacity 5500 kg Side shift Opening range 560-2140 mm Width 1600 mm Fork length 840 mm ID OS2049

Condition: used, functionality: fully functional, Year of construction: 2022, load capacity: 2,200 kg, Double pallet fork Kdjdpfxezigude Ap Dju Load center of gravity: 600 ISO class: ISO Class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Description: Year: 2022 ISO 2A (41 cm) Capacity: 2200 kg Side shift Opening range: 560-1940 mm Width: 1200 mm Fork length: 1200 mm ID: OS1979

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 2,600 kg, Double pallet fork Load center: 600 ISO class: ISO Class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2020 ISO 3A (51 cm) Capacity 2600 kg Side shift Opening range 560-1940 mm Width 1200 mm Fork length 1200 mm Kjdpfx Apezl Ivzs Dsdu ID OS2077

Year of construction: 2009, condition: ready for operation (used), - USED - ELECTRICAL AUTOMATIC PANEL BENDER FOLD LENGTH: 2150 mm MAX FOLD HEIGHT: 200 mm MIN LENGTH/WIDTH BETWEEN FOLDS: 160-350 mm TONNAGE: 32 ton CONTROL UNIT: SIEMENS 840D WEIGHT: 30000 Kg OVERALL DIMENSIONS: 8500 x 7000 x 2850 mm Kdsdpfx Apey T Szye Deu ACCESSORIES: AUTOMATIC TOOL CHANGE ; MANIPULATOR ; REVERSE BENDING CYCLE ; SHEET METAL CENTERING SYSTEM NOTE: NO 2 ASP/700 CNC AUXILIARY AXIS; ADDITIONAL UPPER TOOL; LOADING/UNLOADING SYSTEM

Condition: used, functionality: fully functional, Year of construction: 2018, load capacity: 2,600 kg, Double pallet fork ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Kjdpfxsvb Rz No Ap Dedu Description: Year 2018 ISO 3A (51 cm) Capacity 4000 kg Sideshift Opening range 550-1930 mm Width 1300 mm Forks 1000 mm 2 of 4 forks ID OS1498

Condition: excellent (used), Year of manufacture: 2004 Comprises: 4 punching units and a forming line with 20 roll-forming stations, including welding and punching. Ksdjygkw Eopfx Ap Dodu

Condition: used, functionality: fully functional, Year of construction: 2015, load capacity: 3,000 kg, Double pallet fork ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Kdedpfx Apsw Dwr Eo Dju Technical condition: good Description: Year 2015 ISO 3A (51 cm) Capacity 3,000 kg Sideshift Opening range 560-1960 mm Width 1,600 mm Forks 1,150 mm ID OS1559

Condition: used, functionality: fully functional, Year of construction: 2015, load capacity: 2,600 kg, Double pallet fork ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2015 ISO 3A (51 cm) Capacity 2,600 kg Sideshift Kdodpfxjw Dwr Se Ap Dsu Opening range 560-1,930 mm Width 1,200 mm Forks 1,100 mm ID OS1560

Condition: like new (used), functionality: fully functional, Year of construction: 2010, The line is from 2010. Modernization is being done in 2020. ZEMAN CZS LINE SPECIFICATIONS ZEMAN's flagship product, the fully automated "PURLIN" line, is used to produce open, cold-formed sections such as C, Z, and SIGMA, in various widths and shapes, thanks to fully automatic adjustment of the profiling rollers. Coils up to 750 mm wide and 1.25 mm to 3 mm thick sheet metal in grade S-390 and lower can be used as raw material. The machine is designed to produce components up to 15 m long. The width of the specially hardened profiling rollers is infinitely adjustable, using only dedicated software. A fully integrated "flying punching" device creates all types of mounting holes, and the entire process is continuous, meaning the material does not stop for individual operations such as punching holes or cross-cutting. To maintain production efficiency, the line speed is dynamically optimized. The machine decelerates and accelerates automatically without operator intervention. A coil uncoiler with a maximum working load of 15 tons is mounted on a mobile trolley, enabling precise centering of the material strip before feeding it into the straightener. Kedpfx Apeymampj Dedu The straightener, along with a crescent straightening system, allows for straightening the material, ensuring the required sheet flatness and reducing the crescent on the feed belt. 2. Punching Section This section contains 5 double, "flying" punching portals, which can be equipped with 20 small (up to 40 mm) or 10 large (up to 100 mm) tools (punches and dies) for punching mounting holes. A combination of these tools can also be used. 3. Pre-cutting Shear A "flying" shear used to make preliminary holes for the cutting shear. This process is designed to maintain material continuity, resulting in a more precise profile shape, especially at its beginning and end. This is an adaptive guillotine that adjusts the width of the hole being cut to the width of the sheet metal strip. 4. Guide Carriage/SIGMA Modules The guide carriage is used to center the sheet metal strip before entering the profiler. It is interchangeable with the module for producing Sigma-shaped profiles. To produce S+ profiles, the guide table should be removed and two Sigma modules inserted. These modules position fully automatically and independently, left and right. 6. Rotary Cut-Off Guillotine. The rotary cut-off guillotine with hook knives is used to finally cut the profile from the material strip using the holes made by the pre-cutting guillotine. This is a "flying" guillotine, so the sheet metal does not stop during the cutting process. Depending on the profile being produced, a properly oriented cutting cassette should be attached. 7. Receiving Table The receiving table is used to automatically discharge the completed profiles from the roller conveyor. The elements are then manually arranged into a package. The design allows for easy bundling of the package. The table is designed to accept 15-meter profiles and allows for access by a forklift or overhead crane to collect the package of profiles.