Profiling machine

Formit limited Duplex F1

Condition: used, Year of construction: 2001, Technical details: turning diameter over bed: 410 mm Knedpfezd Sg Ijx Ap Dsc turning dia. over face-slide: 200 mm turning length: 950 mm bed width: 330 mm turning diameter over support: 410 mm face slide travel: 630 mm centre height: 200 mm control: Siemens/Weiler D2 milling spindle dia. in forward position: 90 mm spindle bore: 54 mm range of revolution per miute: 1 - 3000 U/min feed speed: 0 - 20 mm/U rapid travel - longitudinal/face: 10/5 m/min tailstock taper MT: 4 diameter of quill: 65 mm quill stroke: 120 mm weight of the machine ca.: 2,1 t dimension machine approx.LxWxH: 2,3 x 1,4 x 1,7 m The E35 is neither a purely manual machine nor a classic CNC, but a hybrid: Work like on a conventional lathe Automatic cycles at the push of a button No complex programming required Extremely fast for single parts & small batch production Also suitable for operators without CNC knowledge Weiler describes it as follows: Simple parts like conventional machining Complex parts like CNC, but easier *

Condition: ready for operation (used), Year of construction: 2019, X-axis: 620mm, y-axis: 520mm, z-axis: 460mm, B-axis: -50° to +110°, C-axis smallest increment: 0.001°, distance from spindle nose to table surface B/C-axes: 140-600mm, B/C-axis rotary table diameter: 650mm, centering bore: Ø55H7x12, T-slots quantity/width/pitch: 5x18x100, max. workpiece dimensions: Ø520x330mm, max. table load (90°/horizontal): 200/300kg, max. spindle speed (standard) direct drive: 12,000/min, spindle bearing inner diameter: 70mm, rapid traverse X/Y/Z: 36m/min, working feed rate: 1-10m/min, rapid traverse B/C-axis: 25rpm, tool holder: MAS BT-40, number of tool positions: 40, max. tool length: 250mm, max. tool weight: 7kg, compressed air requirement: 0.6MPa / 500l/min, coolant tank capacity: 420l, connected load: 45kVA, control: Heidenhain iTNC 640 HSCI, length: 2325mm, width: 4210mm, height: 3108mm, weight: 9.5t, operating hours control on: 9,380h, machine on: 9,501h, program run: 3,141h, hydraulics: 8,371h, axes: 1,863h, spindle S1: 2,377h. Equipment: roller guideways in all 3 linear axes (Taiwan manufacture), spindle chiller, hydraulic unit, central lubrication system, oil separator, water gun, air gun, full enclosure, machine light and warning light, M30 machine shutdown, air conditioning unit for electrical cabinet, chip conveyor (scraper-type design), chip bin, work area flushing device, tailstock support for rotary table, roller guideways in all 3 linear axes, CE-compliant design, CTS (coolant through spindle), Heidenhain linear scales X/Y/Z, workpiece probing system, transformer, oil mist extraction unit, collision protection software, spindle thermal compensation, with documentation. An on-site inspection is possible. Kodpfxjzavyfe Ap Dsnc

Year of construction: 1993, condition: ready for operation (used), Center height: 280mm, distance between centers: 2000mm, turning diameter over bed/cross slide: 570mm/365mm, spindle bore: 62mm, speed: 2500rpm, max. workpiece weight: 1000kg, bed width: 360mm. Machine dimensions X/Y/Z: approx. 4000mm/2250mm/2000mm, weight: approx. 5500kg, control: Siemens. An on-site inspection is possible. Kjdpfx Aoxq Eyuep Djnc

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 2,000 mm, table load: 8,000 kg, spindle diameter: 105 mm, table length: 1,500 mm, table width: 1,500 mm, rotational speed (max.): 3,500 rpm, RET10X, 2026 ■ HORIZONTAL BORING MILL – T-TYPE ■ PRODUCER: RETOS VARNSDORF ■ PRODUCTION YEAR: 2026 ■ CONDITION: NEW ■ WARRANTY: YES ■ IN STOCK SPECIFICATION Kjdpfjfk I Nkex Ap Denc ■ HEIDENHAIN TNC 640 control system ■ HEIDENHAIN drives and SIEMENS motors ■ Rolling guideways for all axes ■ Ram headstock ■ B axis interpolation controlled ■ Ready for cooling through spindle axis and automatic tool changer ■ can be equipped with other optional accessories - delivery on request

Year of construction: 2015, condition: ready for operation (used), A CNC milling machine Spinner is available. Travel X/Y/Z: 760mm/460mm/460mm, table dimensions X/Y: 900mm/410mm, max workpiece weight: 350kg, tool stations: 24, max tool weight: 8kg, max tool length: 200mm, speed: 12000rpm, max tool diameter: 80mm, tool holder: SK40. Machine dimensions X/Y/Z: approx. 2600mm/1600mm/2850mm, weight: approx. 4000kg. Including automation and robot M10. Documentation available. An on site inspection is possible. Kjdexwn I Ujpfx Ap Djnc

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 2,050 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 12 m/min, feed rate X-axis: 8 m/min, feed rate Y-axis: 8 m/min, feed rate Z-axis: 8 m/min, table width: 850 mm, table length: 2,200 mm, table load: 4,800 kg, spindle speed (min.): 10,000 rpm, distance table to spindle center: 950 mm, Equipment: chip conveyor, documentation/manual, Johnford VMC 2000 vertical machining center, CNC Heidenhain iTNC 530. X-axis – Longitudinal 2,050 mm Y-axis – Transverse 850 mm Z-axis – Vertical 800 mm Spindle-to-table distance 150-950 mm Main spindle to column distance 885 mm Table Surface 2,200x850 mm Maximum weight 4,800 kg Spindle Head Spindle taper - BT-40 (BIG PLUS System) Speed range (2) 10,000 rpm Motor HP 25 Equipped with: - Internal coolant system 20 bar Knedpfjxdiigjx Ap Djc - Part probe - Tool probe - Rigid tapping - Electronic handwheel - 2 longitudinal chip conveyors - Separate tank with filtration unit - Full enclosure

Condition: used, Year of construction: 2004, Technical details: x-travel: 1500 mm y-travel: 1000 mm z-travel: 1000 mm control for program: TNC 530 spindle hours: noch nicht bekannt h milling head speed: 1: 30 bis 930 und 2: 930 bis 4000 / steples U/min tool taper: horiz./vertical: SK 50 (DIN 69871/Din 69872 Form A) max. torque on the spindle: 1000 Nm spindle head swivable left - right: 90 ° feed: 1 - 6000 mm/min feed power: 30 kN kN rapid traverse: 15 m/min Number of tools: 1 St. table clamping surface LxW: 1600 x 800 mm table load: 40 kN kN voltage: 400 V / 50 HZ V total power requirement: 42 kW Weight approx.: 15,2 t compressed air: 6,3 bar Ksdpfx Apju Nc Ris Denc dimension machine xH: 3,1 x 4,7 x 2,6 m dimensions: Kühlfilter: 1,9 x 1,6 x 1,4 mm space requirements approx. LxWxH: ca. 38,5 m² m² Applications: Milling, drilling; tapping, boring. with direct coded length measuring systems the guideways of the 3 axes are on flat guideways CTS and external cooling Milling head position controlled +/-90° milling spindle nominal drive power 22 kW with integrated hydraulic power unit up to 100bar operating pressure with coolant unit with filtration, with high pressure pump 60 bar (internal cooling), nominal delivery 20 l/min. and low pressure pump 4 bar (external cooling) as well as spray gun Hinged belt chip conveyor DGS, type SSF 600 P50 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO *

Condition: good (used), Year of construction: 2003, turning length: 1,505 mm, Turning-milling center GILDEMEISTER GMX 400 linear with Y-axis and milling spindle Year of manufacture: 2003 Control system: Sinumerik Powerline Technical data: Drive power main spindle ISM 90: 36/45 kW (100/40%) Main spindle speed: Main spindle torque: Bar diameter: 90 mm Number of magazine slots: 120 pcs. Tool holder for milling spindle: HSK 63 Drive power counter spindle ISM 90: 36/45 kW (100/40%) Counter spindle speed: Counter spindle torque: Bar diameter: 90 mm B-axis / milling spindle: Knsdpswzbq Tsfx Ap Dec Drive power: Speed: Torque: Tool holder: HSK 63 Y-axis: +/- 110 B-axis: +/- 120° Lower turret: X-axis: Z-axis: Speed of driven tools: Number of turret slots: 12 pcs. Tool holder: VDI 40 Accessories: - Chip conveyor - High-pressure system with 20 bar - Preparation for 3D measuring probe - Tailstock function for counter spindle - Automatic sliding doors

Condition: used, Year of construction: 2018, operating hours: 8,563 h, functionality: fully functional, WEILER E 30 X 750 Cycle Turning Machine (2018) Knsdpfx Ajzy Sr Nep Doc Manufacturer: WEILER Type: E 30 X 750 Cycle Turning Machine Year of manufacture: 2018 Condition: Used Operating hours: 8563 h

Condition: excellent (used), Year of construction: 2020, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,500 mm, rapid traverse X-axis: 35,000 m/min, rapid traverse Y-axis: 40,000 m/min, rapid traverse Z-axis: 40,000 m/min, total width: 5,800 mm, total height: 4,500 mm, total length: 13,500 mm, table length: 10,000 mm, table width: 1,250 mm, Travelling Column High performance, precision and machining power Linear guiding of RAM combined with Hydrostatic Guiding HDS ACD2 Milling head with 5000 Rpm and 1400 Nm torq Aitek ATC chain 60 position with L=400 and 250 diameter x 35 Kg Filtration with IKZ 15 Bar Chip conveyor BLUM 3D Measuring probe Wide bed linear guided in X-Travel W=930 mm Rotary table driver prepared in E-Cabinet X-Axis: 8000mm Y-Axis: 1300mm Z-Axis: 2500mm Table Length: 10000mm Table Width: 1250mm Power on spindle: 40kW Spindle speeds: 5000Rpm Spindle Taper: 40ISO/Bt/Mk Feed rate X-Axis: 35000mm/min. Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Millinghead auto-index:0.001 x 0.001 Gr° Working hours: 3800H Length: 13500mm Width: 5800mm Kedjyr Dmdepfx Ap Donc Height: 4500mm Weight: 45000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!