Used Profile Grinding for sale (9,410)

Condition: excellent (used), Year of construction: 2023, Connected load: 3 kVA Max. current: 4.3A Price on request Fpsdpfx Aoxrmruoh Uop

Condition: ready for operation (used), Year of construction: 2000, operating hours: 1,234 h, functionality: fully functional, grinding length: 600 mm, grinding width: 350 mm, Surface grinding machine by Geibel & Hotz - FS 635 SA - Year of manufacture: 2000 - Equipped with a PLC control - Grinding area: 600 x 350 mm - Magnetic area: 600 x 350 mm Fodpfxjxrgi Ts Ah Ujpp The machine is still in operation and can be made available at short notice by arrangement. Inspection is possible at any time. Collection by the buyer (assistance with loading is possible – forklift available).

Condition: used, Double Bench Grinder AEG Type DWS 200/800M No: 87 644919 Year of manufacture: approx. 1970 Grinding wheel diameter: 200 mm Grinding wheel width: 32 mm Fpsdsxrgvaspfx Ah Ujp Motor power: 0.8 kW Grinding wheel speed: 3000 rpm Power supply: 380 V, 50 Hz - Motor bearings need to be replaced - 1 grinding wheel with 25 mm width - 1 grinding wheel with 32 mm width Required space (L x W x H): 600 x 280 x 300 mm Weight: 40 kg

Condition: good (used), Year of construction: 1984, Used TOS KAMENICEK model BUC63A x 3000 Universal cylindrical grinding machine. YEAR OF MANUFACTURE: 1984. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION Max Swing 630 mm Distance between centres 3000 mm Workhead swivel – towards wheelhead only 90 deg. mm Fedpfx Ash U Rzneh Uepp Work spindle bored taper No. 6 M.T. Length of stroke of tailstock barrel 70 mm Tailstock barrel taper No. 6 M.T. Spindle nose clamping Din 55021 Swivelling of wheelhead + 30 deg – 10 deg Length of adjustment by re-circulating ball screw 290 mm Additional length of adjustment 250 mm Length of rapid feed 90 mm Length of infeed setting per each rev. of handwheel, measured on work diameter 0.5 mm Grinding wheel dia. X width X bore 750 x 80 x 305 mm Min. dia. of worn grinding wheel 570 mm Max. face width of grinding wheel 125 mm Rate of table traverse – steplessly variable 0.5-0.6 m/min Table traverse per 1 rev of handwheel 8 mm Swivelling of table +/- 5 deg. Max. permissible weight of work between centres 2500 kg Max. permissible weight of workpiece in chuck with overhang. (including weight of chuck) 150 kg Wheel spindle speeds (2) 840,970 rpm Grinding wheel surface speed 33 m/sec Work spindle speeds – int. var. in 2 ranges 8-50, 50-315 rpm Drive – total power required rated 31 kva Output of workhead motor 3 kw Output of wheelhead motor Electrics 15 kw 415V ,3Ph,50Hz Equipped with:- Additional wheel flanges, coolant system with clarifier and splash guards. FEATURES AND EQUIPMENT – Swivel Round Internal Grinding Attachment

Condition: used, Year of construction: 2000, grinding length 600 mm grinding width 300 mm magnetic clamping plate 600x250 mm Fjdpfx Ahsw Hg Uzo Uopp wheel diameter 220-300 mm weight 2200 kg

Condition: good (used), Year of construction: 1992, 1,0 St. gebr. Flachschleifmaschine Hersteller: ELB Typ: SUPER - RUBIN 024 CNC Baujahr: 1992 Verfahrwege: Schleiflänge: 600 mm Schleifbreite: 275 mm Schleifhöhe: 375 mm Tischaufspannfläche: 900 x 300 mm Tischbelastung: 300 kg Fpjdsi Ra Tyepfx Ah Usp Vertikal - Vorschub: max. 300 mm/min. Quervorschub: max. 2.000 mm/min. Steuerung: UNICON Im Lieferumfang sind Schleifscheiben enthalten siehe Fotos.

Condition: excellent (used), Year of construction: 2012, DISKUS DDS 750 XR – Technical Specifications Machine type: vertical double-disc grinding machine Model: DDS 750 XR Grinding wheel diameter: 750 mm Maximum grinding width (through-feed): 180 mm Maximum material thickness (through-feed): 30 mm Maximum grinding width (plunge-cut): 300 mm Fodpfx Ahewwrqce Uspp Maximum material thickness (plunge-cut): 80 mm Grinding spindle 1 power: 48 kW Grinding spindle 2 power: 48 kW Grinding wheel surface speed (max): 63 m/s Coolant delivery: through the spindle center Feeder type: rotary feeder Feeder speed range: 20 mm/min to 240 mm/min Control system: Siemens 840 D CNC Total machine height: approx. 3,100 mm Overall weight: approx. 13,000 kg Footprint requirements: length approx. 4,900 mm, width approx. 5,000 mm Construction features: triangular rigid frame, linear-guide spindles, 16 CNC axes, central lubrication, coolant filtration

Condition: used, Year of construction: 2004, grinding wheel diameter 660 mm Control Siemens 840D work piece width min. 5 / max. 180 mm Fjdpfxexq R Haj Ah Uspp max. workpiece diameter 200 mm weight of the machine ca. 15,0 t dimensions of the machine ca. L 3,1 x B 4,0 x 2,7 m In our opinion, the machine is in good used condition. The machines were used for the production of connecting rods. Two machines are available. One machine is suitable for pre-grinding and one for regrinding. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Double grinding machine METABO Type 730 Serial No. 208158 Grinding wheel diameter: 200 mm Grinding wheel width: 33 mm Motor power: 0.75 kW Grinding wheel speed: 2800 rpm Power supply: 380 Volt, 50 Hz - Original stand Required space (L x W x H): 630 x 340 x 1150 mm Weight: approx. 80 kg Fjdpfxoxrguie Ah Ujpp

Condition: good (used), Year of construction: 1998, Manufacturer: Henninger Type: ZS-201 Year of manufacture: 1998 Self centerring device Double column slide ways Dressing Unit Tailstock by rack & pinion Eccentric adjustment 0 - 20 mm Large Cone-Stone tooling package Specifications Metric US Standard Minimum workpiece Ø Fpedpfjvt Tuijx Ah Usp 20 Ø Min. Maximum workpiece Ø 450 Ø Max. Max. product length 1200 mm Speed 18300 Rpm Max. grinding angle 45 - 120 ° Max. workpiece weight 190 Dimensions (estimate) Length 1250 mm Width 1250 mm Height 1900 mm Weight 365 kg Please note: The information on this page has been compiled to the best of our knowledge and belief by us and, where possible, by the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you review all important details.

Condition: used, Year of construction: 2017, grinding length 1000 mm centre height 180 mm length 3600 mm width 1650 mm height 1800 mm weight of the machine ca. 3,7 t Fedpewp Tumsfx Ah Uspp

Condition: good (used), Year of construction: 1993, with oil filtration system Fpsdpexr Arqofx Ah Usp Unfortunately, no further technical data is available.

Condition: good (used), Year of construction: 1992, Favretto MB 130 – Technical Specifications Machine type: tangential (horizontal) surface grinding machine Year of manufacture: 1992 Table size: 1700 × 400 mm Magnetic chuck size: approximately 1300 × 400 mm Magnetic plate height: 40 mm Longitudinal travel (X-axis): 1380 mm Cross travel (Y-axis): 450 mm Vertical travel (Z-axis): 550 mm Fpodpfxet Rwvzj Ah Uep Distance between spindle center and table surface: 203 mm (min) to 753 mm (max) Grinding wheel dimensions: 400 mm diameter × 152 mm width × 100 mm bore Spindle speed: approximately 1400 rpm Longitudinal feed rate: 2000 to 40000 mm/min Cross feed rate: 50 to 3000 mm/min Vertical feed rate: 700 mm/min Grinding head motor power: approximately 15 kW Total installed power: approximately 25 kW Maximum table load without magnetic chuck: approximately 1500 kg Maximum table load with magnetic chuck: approximately 1205 kg Overall grinding capacity (L × W × H): approximately 1500 × 600 × 550 mm Machine weight: approximately 7100 kg

Condition: ready for operation (used), Year of construction: 2000, Immediately available ex location: Fpedpfxoxvnz Ee Ah Ujp Horizontal Surface Grinding Machine ABA Type ECOLINE L 1006 Year of manufacture: 2000 Control: Abamatic – 1 Operator Table: 1000 x 600 mm Table load capacity: 1000 kg Grinding length: 1000 mm Grinding width: 700 mm Installation height: 700 mm Grinding wheel: 400 x 100 x 127 mm Grinding wheel speed steplessly adjustable up to 2600 rpm Drive power: 11 kW Grinding wheel speed steplessly adjustable up to 2600 rpm Feed rates, X axis: steplessly adjustable up to 10,000 mm/min Feed rates, Z axis: steplessly adjustable up to 10,000 mm/min Feed rates, Y axis: steplessly adjustable up to 10,000 mm/min Magnetic chuck Belt filter system Weight: 6 t Price: EUR 9,500 – plus VAT, ex foundation

Condition: used, Double grinding pedestal AEG type DWS DWS 301/1100 No: 87 154303 Year of manufacture: approx. 1970 Grinding wheel diameter: max. 300 mm Grinding wheel width: max. 40 mm Motor power: 1.1 kW Grinding wheel speed: 1500 rpm Power connection: 380 Volt, 50 Hz - Fitted grinding wheels Ø 260 mm - Motor newly fitted with bearings Required space (L x W x H): 650 x 450 x 370 mm Weight: 64 kg Good condition Fodpfx Ajxrgtxsh Uspp

Year of construction: 2007, condition: used, control Siemens 840D grinding wheel diameter 900 mm Workpiece - grinding width 144 - 152 mm Workpiece - grinding dimension 22 - 25 mm turning speeds 24 m/s: 1.425 U/min peripheral speed max. 25 m/sec capacity 37 kW total power requirement 75 kW weight ca. 18,0 t dimensions of the machine ca. L 4,9 x B 4,9 x H 2,6 m In our opinion, the machine is in good condition used condition. Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Fjdpjxq Hkuofx Ah Ujpp Subject to prior sale!

Condition: used, Year of construction: 1999, grinding diameter 120 mm centre height 100 mm Stirnschleifeinrichtung Kein Typenschild auffindb Fsdsw Sybdjpfx Ah Uspp

Condition: good (used), Year of construction: 2000, Grinding diameter: up to 100 mm Max. Grinding depth with a table stroke of a) 300 mm = 120 mm b) 550 mm = 230 mm Center height above grinding table = 235 mm Fpedpfxsxr Ayue Ah Uep Table speed = 0-20 m / min including various spindles and accessories

Condition: not inspected (used), Year of construction: 1998, machine/vehicle number: 2183, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, spindle speed (max.): 60,000 rpm, spindle speed (min.): 9,000 rpm, workpiece weight (max.): 300 kg, total height: 3,250 mm, feed rate X-axis: 2,000 m/min, feed rate Y-axis: 2,000 m/min, table width: 380 mm, table length: 600 mm, table load: 300 kg, overall weight: 4,500 kg, travel distance W-axis: 450 mm, Equipment: documentation/manual, THIS MACHINE IS SOLD EXCLUSIVELY WITHIN THE EU – THANK YOU FOR YOUR UNDERSTANDING! Item type: CNC Coordinate Grinding Machine Manufacturer: HAUSER Model: S35-400 Year of manufacture: 1998 Machine number: 2183 Condition: According to the previous owner and a Hauser specialist, the machine is in good condition. Terms of delivery: Free loaded onto truck Availability: Immediately (subject to prior agreement) Location: Magdeburg Technical data: • Control: GE Fanuc Series 16-M • Tool holder: Collets EX 19 or grinding arbors E19 • Travel X / Y / W axes: 500 / 300 / 450 mm • Feed rate X & Y axes: 0 – 2000 mm/min • Feed rate W axis approx.: 900 mm/min • Table dimensions: 600 x 380 mm • Max. table load: 300 kg • Grinding spindle speed stepless: 9,000 – 60,000 rpm • Z-axis stroke speed stepless: 0.5 – 14,000 mm/min • Fire extinguishing system • Further technical data – see pictures Scope of delivery: • Grinding motor 60S (9,000 – 60,000 rpm) – see separate pictures • Extraction system • Coolant system • Dressing turbine • Available manuals • The clamping equipment visible in the pictures as well as the currently mounted grinding motor are NOT included in the scope of delivery! Dimensions & weights: • Installation dimensions (L x W x H) approx.: 4,250 x 4,000 x 3,250 mm • Weight approx.: 4,500 kg Fpedowakqyjpfx Ah Uep If you have any questions or would like to arrange a viewing, please feel free to contact us. Additional notes: The tool changer is not operational – according to the previous owner, it was never needed anyway! • On request, we can arrange transport to the destination. • The offer price is net plus VAT. • The goods are sold under exclusion of any warranty! • The sale is exclusively to business customers! • Technical data subject to change and without guarantee. • Subject to prior sale.

Year of construction: 2002, condition: ready for operation (used), General Data Measurements depth 3340 mm Measurements width 1960 Measurements height 2050 mm Machine weight 5000 kg Control Unit Fsdpfoxulfxox Ah Uepp Brand FANUC Model Series 21i-T This JUNKER EJ 29 CNC was manufactured in 2002. A robust cylindrical grinding machine, it features a grinding wheel diameter of 400 mm, motor power of 4.5 kW, and spindle speeds up to 1000 rpm. It can handle grinding lengths up to 600 mm and diameters up to 280 mm. Control is managed via a GE Fanuc Series 21i-T unit. Consider the opportunity to buy this JUNKER EJ 29 CNC cylindrical grinding machine. Contact us for more information. Application Types Grinding

Condition: used, Year of construction: 2017, grinding length 1500 mm centre height 180 mm weight of the machine ca. 3,9 t Fodpfx Aswm Rqgjh Uepp dimensions of the machine ca. L: 4900 x 1650x 1800 m

Year of construction: 1979, condition: good (used), Flat grinding machine make Brand Type: Compact 600/800 with Heidenhain control We do not have any further technical data. Fpsdpfx Ahoxr Ax De Uep

Condition: used, Year of construction: 1995, table-size Breite: 800 mm table-size Tiefe: 350 mm Dimensions (L/W/H) 4600 x 3200 x 2500 mm Fpsdpfx Ahswp Tuye Uep weight of the machine ca. 4,5 t

Condition: used, Year of construction: 1960, grinding diameter ca. 360 mm grinding length 1500 mm Fsdpfow Sya Tsx Ah Uopp serial number 12013

Condition: used, Year of construction: 2001, x-axis 1000 mm y-axis 500 mm z-axis 425 mm table size 1000x500 ja weight 4200 kg Fpjdoww Nf Djpfx Ah Uep