Used Profiling Machine for sale (67,856)

Condition: used, Profile ring bending machine with manual crank drive, year of construction approx. 1950 Lower rollers Ø 56 mm with grippy knurling Lower roller width: 115 mm Upper roller Ø 100 mm Upper roller width: 110 mm - Symmetrical roller arrangement with 2 driven lower rollers Laodpfx Ahsxbtx Hj Ssf - Upper roller adjustment 55 mm via threaded spindle - Manual crank drive with 6:1 gear ratio Required space (L x W x H): 440 x 660 x 1000 mm Weight: approx. 200 kg

Condition: used, Thread rolling machine, cold rolling machine, thread forming machine, profile rolling machine Manufacturer PEE-WEE, Type P 24 Q Lajdpfxjh A S Htj Ah Sof Serial No. LC2403099, Year of manufacture 2004 Rolling force, max. 24 tons Tool diameter, max. 200 mm Rolling spindle diameter 69.85 mm Tool bore diameter 70 mm (nominal diameter) Receiving length, tool length, max. 180 mm Workpiece diameter, max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 RPM Hydraulic motor power approx. 3 kW Rolling drive motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Swiveling rolling spindle for thread through-rolling - Rolling spindle speed in 4 stages via gear change - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons Good condition Plunge rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The thread length is a maximum as long as the rolling tools are wide. Through-rolling tools: If the thread length is greater than the rolling tool width. Through-rolling tools have 3 sections - the inlet, the calibrating section, and the outlet. Grooved rollers have no pitch and are swiveled with the helix angle of the profile to be rolled. Helix rollers differ from grooved rollers by having a pitch in the profile. The sum of the helix angle and the swivel angle results in the helix angle in the workpiece.

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lsdpfx Ahjuz If Ns Ssaf Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: used, Mechanical quick-action vise, NC machine vise, FRIBOSA, Type, Size B Precision machine vise, grinding vise, clamping device Jaw width 100 mm Jaw height 34 mm Clamping range 0 to 130 mm Guide rail height 40 mm Guide rail length 270 mm - Mechanical machine vise Lodpfx Aoilx Ufeh Sjaf - Clamping range via trapezoidal spindle - Sturdy base, ground on all sides - Can be mounted horizontally, vertically, or laterally Dimensions L x W x H 310 x 100 x 77 mm Weight: 10 kg Good condition

Condition: used, 5-way combination profile steel shear, PEDDINGHAUS Type 210 AD/13 Machine No. 529A059, Year of manufacture approx. 1970 Punching unit: Punching force 60 tons Punch stroke 25.5 mm Punching capacity Ø 25 mm in 16 mm sheet metal Ø 20 mm in 19 mm sheet metal Overhang 365 mm Round bar shear: Cutting capacity, round 42 mm Square 38 x 38 mm Flat bar shear: Cutting capacity at shear angle 5° 150 x 13 mm or 200 x 10 mm Blade length 245 mm Profile steel shear: Shearing capacity, angle iron at 90° 110 x 10 mm Shearing capacity, angle iron at 45° 90 x 9 mm T-steel 110 x 10 mm Notching device: Rectangular notching up to 12 mm sheet metal Punch dimensions 85 x 50 mm Laodpfxsi Duh Ij Ah Sef Motor power 3 kW Mains connection 380 Volt, 50 Hz - Center-finding device via hand lever and centering device - Mechanical stroke release via hand lever - Flat bar shear equipped with 2° blade - Mechanical clamp on the profile steel shear, round bar shear and on the flat bar shear Space requirement L x W x H 1500 x 800 x 1900 mm Weight 2000 kg Good condition

Condition: like new (used), Year of construction: 1998, Technical Data: 2 hydraulically adjustable rollers 3 driven rollers Laedpfx Aoy Rxuzoh Sef Display with digital readout Bending moment: 110 cm/3 Shaft diameter: 180 mm Roller diameter: 460 mm Main motor power: 15 kW Dimensions (L x W x H): approx. 2400 x 2000 x 1600 mm Weight: approx. 7.8 t Accessories: Various tools Condition: Very good, almost as new The seller assumes no liability for typing or data transmission errors. The machine complies with its age in terms of appearance, technology, and wear; used machines are sold without any warranty.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser power: 12,000 W, sheet thickness (max.): 30 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Supports 12m steel pipe cutting Equipped with fully automatic combined loading and unloading system One-stop intelligent loading, cutting and unloading, increasing production efficiency by 200% Supports multiple processes such as beveling, locking, cutting, punching, opening welding holes, cutting bolt holes, marking and marking Lajdpfx Ajw A H T Aoh Sjf Laser power 12,000 W – 20,000 W X-axis travel 1,600 mm Y-axis travel 1,900 mm Z-axis travel 900 mm A-axis rotation ±90° C-axis rotation ±90° U-axis travel 30 mm V-axis travel 13,000 mm Positioning accuracy ±0.1 mm Max. workpiece section 1,000 × 400 mm Max. supported weight 5 T Supported profiles H-beam, channel steel, I-beam

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 15360599, spindle speed (max.): 2,800 rpm, travel distance X-axis: 600 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 383 mm, disc diameter: 300 mm, TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 350 mm Z-axis travel: 383 mm Lsdpfx Asxnwm Ueh Sjaf Maximum grinding area: 600 x 350 mm Standard magnetic table size: 600 x 350 mm Grinding wheel diameter: 300 mm Spindle speed: 2,800 rpm Clamping surface: 820 × 350 mm Maximum table load: 400 kg Table speed: 0.005–35 m/min Rapid traverse (cross and vertical movement): 4,000 mm/min MACHINE DETAILS Control system: Siemens Electrical Data Operating voltage: 400 V, 3-phase Mains frequency: 50 Hz Machine weight: 2,200 kg EQUIPMENT - Coolant system - Automatic grinding wheel dresser

Condition: used, Year of construction: 2000, machine/vehicle number: 90816, Technical specifications: 1st shaft: lower horizontal, 2nd shaft: right spindle moulder, 3rd shaft: left spindle moulder, 4th shaft: upper horizontal, 5th shaft: lower horizontal, 6th shaft: universal, ATS control, any width, maximum width: 230, maximum height: 120. Lasdpfx Ahexp U R He Sjf

Year of construction: 1990, condition: used, functionality: fully functional, For sale is a robust and fully operational roll forming machine for the production of corrugated and tile-profile sheets made of aluminum. The system is suitable for the continuous production of various profile geometries. The machine was commissioned in October 1990 at Leichtmetallwerk Nachterstedt GmbH and impresses with its solid industrial design. Thanks to the integrated profiling line, the cutting and embossing tool, and the automatic stacking device, an efficient production process is possible, from the coil to the finished profile. The system is particularly designed for the production of roofing profiles, tile profiles, and aluminum corrugated profiles, thus offering a versatile range of applications in the field of sheet metal processing and profile manufacturing. System components: - Coil Laodpfoy Sxhwjx Ah Sof - Profiling line - Cutting and embossing tool - Automatic stacking device Currently produced profiles: - Tile profile 33/175; material thickness: 0.6 mm - Asymmetrical corrugated profile 33/175; material thicknesses: 0.6 mm and 0.7 mm - Aluminum corrugated profile 28/125; material thicknesses: 0.7 mm, 0.8 mm and 1.0 mm Condition & Inspection: The system is ready for production, is in fully operational condition, and is currently still used for production. This allows the functionality to be verified on-site if desired. The roll forming machine can be inspected at any time by arrangement at our location in Krostitz, Hilchenbacher Straße 2A. The system is immediately available and ready for sale. We will gladly provide further technical information, images or details upon serious interest.

Condition: new, Number of sanding units 1 St. Profile width 390 mm Profile height max. 390 mm Lodpfx Aeytx Ufeh Soaf

Condition: used, total length: 3,700 mm, total width: 1,000 mm, total height: 1,700 mm, overall weight: 800 kg, oscillation stroke: 30 mm, grinding belt length: 1,500 mm, grinding belt width: 150 mm, power: 6.5 kW (8.84 HP), rotational speed (min.): 1,400 rpm, rotational speed (max.): 2,800 rpm, No. 04513 Profile grinding machine / automatic edge processing machine Rehnen KBA Used Profile grinding machine / automatic edge processing machine for grinding edges, milling profiles, and grinding profiles in a continuous process. The machine also has a corner copying milling machine. The materials to be processed are solid wood, chipboard, and MDF. Material thickness 10 - 65 mm Material length min. 50 mm Material width min. 60 mm Feed speed 8 m/min Total power 6.5 kW Equipment: - Oscillating edge sanding device (sanding belt dimensions 150 x 1500 mm / 1400 and 2800 rpm / oscillation stroke 30 mm / contact roller and sanding shoe) - Upper milling unit - Lower milling unit - Corner copying milling machine / corner rounding milling machine - Bottom profile sanding device - Top profile sanding device - Feed chain conveyor with top pressure Incl. technical documentation Incl. 6 used profile belts (must be refitted) Transport dimensions approx. 3700 x 1000 x 1700 mm LWH Lodeytd Tmopfx Ah Soaf Weight approx. 800 kg To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: ex warehouse

Condition: like new (used), Year of construction: 2017, functionality: fully functional, operating hours: 2,600 h, controller model: Fanuc 32 C, control type: CNC control, Equipment: documentation/manual, Standard programs such as parameter settings Dressing settings Speed settings Program management settings Limitation of travel distances x + y Basic parameter settings Grinding wheel management program Warming-up cycle program Surface plunge grinding program Measuring program 15 kVA transformer Full enclosure Meister G3 Spindle upgrade to 3.7 kW, disc 225 mm Laodpfew I Tt Sex Ah Sof ETHER interface for network connection Control module with extended memory Fanuc Macro B option Program creation for batch programs Programmable spindle speed WinWop program for contour creation (Windows) WINWop program for error compensation WinWop postprocessor CGS Complete Grinding Solutions software Option Dressing Swiveling profile dressing device Diamond dressing wheel Pre-dressing device VPA 100 L Diamond wheel 100 mm for pre-dressing device Regrinding package diamond wheel G3 / W Option – Clamping and Balancing Magnetic chuck 400 x 200 400 mm stop bar with prism Fully automatic balancing device, size 1 Grinding wheel flange for G3, bore 51 mm Option Filter Systems Belt filter system 175 l Extraction unit for emulsion mist 500 Inquiries only from Europe, preferably the EU.

Condition: used, functionality: fully functional, machine/vehicle number: 0171793397124, input voltage: 220 V, input frequency: 50 Hz, used Muhr & Bender HIW 550/510 Lasdpjy Tivusfx Ah Sef Price negotiable

Condition: good (used), Year of construction: 2003, functionality: fully functional, planing width: 230 mm, working height: 100 mm, Planer Moulder P 1000 UNIMAT STAR with 6 Tool Holders Lodpsxyu Itefx Ah Seaf

Condition: used, Work spindles: Number of shafts: Typically 3 tool shafts. Spindle length: 320 mm. Spindle diameter: 50 mm. Maximum tool diameter: Up to 220 mm. Lasdpfx Aheyzrdwo Sef

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, rotational speed (max.): 8,000 rpm, shaft length: 145 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Router unit Number of motors: 1 Laodpfoxxar Ujx Ah Ssf Shaft length: 145 mm Motor power: 4 kW Speed: 8,000 rpm MACHINE DETAILS Installed total power: 5 kW Motor power: 3 kW

Condition: new, Year of construction: 2026, Langmesser profile grinding machine, grinding area 1800 x 250 mm, spindle power 40 kW, with swivel magnet and clamping device, table scraper, automatic coolant nozzle adjustment, grinding wheel 500 x 150 x 203 mm, very powerful machine. We would be happy to send you further details. We look forward to receiving your grinding request. Delivery time for a new machine is approximately 9 months. Financing / leasing is no problem; we would be happy to provide you with a quote! Laodsh H Stropfx Ah Sjf

Condition: good (used), functionality: fully functional, Year of construction: 2005, It is important to know that a total of two welding machines and two CNC corner cleaning machines are available, comprising two complete production lines. The machines are operational and still in daily use. CE Conformity: Yes (CE marking on the machine) Power supply: 400 V Frequency: 50 Hz Current connection: 25 A Main switch: Industrial main switch with safety interlock Operating air pressure: 7 bar Main components - 4 welding heads - Linear motion system - Profile clamping units - Welding plate system - Pneumatic press units - Electronic temperature control - Central control unit - Safety light curtain Operation Profile clamping – Insertion of the heated welding plate – PVC melting – Application of welding pressure – Welding cooling – Removal frame The system operates semi-automatically/automatically. ``` Includes: Lodeyyavropfx Ah Soaf - Automatic head positioning - Pneumatic clamping system - Digital temperature control - PLC control - Operator panel and industrial PC Control system Industrial PC control Safety system - Light curtain - Emergency stop button - Safety covers - CE conformity Powered up in Hungary, the system can be dismantled and delivered in approximately June.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 280022, Schüco profile punching tool for facade series FWS50 and FWS60 with base frame Lasdpfx Asy R D Akjh Sjf

Condition: like new (used), functionality: fully functional, Year of construction: 2019, Sahindler - Scantool profile bending machine Lodpfjytb U Ujx Ah Seaf Model PV 60 NC Year 2019 - New / Demo Roll diameter : 215 mm. Capacity flat iron : 120 x 25 mm. Capacity flat iron on edge : 80 x 20 mm. Capacity angle iron: 70 x 7 mm. NC control 1 set profile bending rolls Hydraulic top roll movement Bending support Footpedal

Condition: ready for operation (used), functionality: fully functional, control type: manual, actuation type: hydraulic, Geka (Spain) Hydraulic Punching, Shearing, and Notching Machine Model: Hydracrop–55/110A Year of Manufacture: 2001 Flat Bar Shear Capacity: 300 x 15 mm / 200 x 20 mm Blade Length: 305 mm Square: 25 mm Working Height: 880 mm Angle Shear Capacity: 1100 kN Deformation-free Angle Iron: 120 x 120 x 10 mm Angle Iron 45° Shear: 70 x 70 x 7 mm Round and Square Bar Shear Round Steel: 40 mm Square Steel: 40 mm Notcher Sheet Thickness: 10 mm Angle Iron: 100 mm Notch Depth: 90 mm Notch Width: 42 mm Punching Station Capacity: 550 kN Maximum capacity with quick-change system: Ø 40 x 10 mm / Ø 20 x 20 mm Throat Depth: 250 mm Stroke Length: 60 mm Working Height: 1085 mm General Specifications Number of strokes per minute at 20 mm stroke: 25 Power: 3 kW Net weight: 1320 kg Gross weight: 1518 kg Dimensions (L x W x H): 1600 x 1100 x 2000 mm Machine Details - 2 cylinders: one for the punching side, one for the shearing side - Punching unit with quick-change system - C-frame die holder + extra support - Nipple and die up to Ø 40 mm selectable - Flat bar shear incl. support table and 45° and 90° guides - Angle shear - Round and square bar shear (suitable for mounting U and I profiles as well) - Rectangular notcher - Emergency stop - Key switch for notcher safety - Selector switch for deep or shallow punch/shear operation - Selector switch for foot pedal / back gauge - Stroke adjustment for punch and shear side - 2 foot pedals - Scrap collection tray for punch slugs - Dutch instruction manual Includes: Punch table incl. back stops Notching table incl. back stops Electric length stop 1000 mm 30 sets of punch nipples Price of the Geka Hydraulic Punch/Shear/Notch Machine: €16,500 Machine is as new, original paint, like new, original finish Delivery conditions: Delivery time: from stock, subject to prior sale Delivery: ex works Baarle-Nassau Payment: before collection Prices: net, excluding VAT Machinehandel De Leeuw BV cannot be held liable for discrepancies between the technical specifications in this offer and the actual machine, accessories, and/or parts. Machines, accessories, and parts are sold as-is and as known to the buyer. We cannot provide a warranty for used machines, accessories, and parts. Lsdpfx Ajyxpaweh Seaf Delivery terms: Delivery time: ex stock, excluding VAT Delivery: ex works Baarle-Nassau Payment: before collection Prices: net, excluding VAT Machinehandel De Leeuw BV is one of the few companies in Europe that stocks and sells primarily used Kardex Remstar automatic lift and rotating warehouse systems. We install and/or dismantle these systems safely with VCA-certified engineers and have been doing so for more than 33 years. Best regards, Antoine de Leeuw Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands VAT No.: NL800103026B01 Chamber of Commerce Tilburg 18034279

Condition: new, Year of construction: 2026, number of rollers: 3, shaft diameter: 60 mm, overall weight: 1,080 kg, Equipment: documentation/manual, emergency stop, hardened rollers, - Ring bending machine - Shaft diameter 60 mm - The two lower rollers are hydraulically moved - Three rollers are driven Lodpfxjgg N Ame Ah Sjaf - 2 digital displays - Brake motor - Can be used horizontally/vertically - Mobile control panel - Emergency stop - Documentation - 400V

Condition: like new (used), Year of construction: 2022, functionality: fully functional, TM-California-4: 4-Axis CNC Machining Center Type California/4-4 • CNC machining machine suitable for aluminium profiles Lodpfex Hd Hzjx Ah Soaf • Automatic opening and closing of the safety cover • Spindle movement via linear guides and servo motor • Equipped with ISO 30 spindle • Power 7.5 kW and speed 24,000 rpm • Electrically rotatable spindle from 0° to 180° • Pneumatic profile stop on both left and right sides • 6 pneumatic profile clamps • The profile clamps are manually positioned as standard • Tool magazine on the right with 6 slots + disc cutter • Automatic tool changing • Automatic cutter length measuring system • Automatic cooling mist with micro-dosing system • Industrial PC and remote service system • 21.5" PC with Windows 10 operating system • Includes Uni-Link CADCAM software with Uni-Link On Board • User-friendly interface for operation and visualisation • Machining length: 4,200 mm • Machinable profile cross-section: 230 x 230 mm • Accuracy: 0.1 mm/m

Condition: new, Year of construction: 2024, shaft diameter: 80 mm, Profile bending machine AHB 100 - with universal rollers - Three roller drive - Digital display left and right bending axis Ljdpjvaw Elefx Ah Seaf - Hydraulic lateral rectifier - Hydraulic drive of the bending rollers - Vertical and horizontal operation - built according to CE standards - Bending capacity flat bars max. 12 x 20 mm - Flat bent 200 x 40 mm - U profile inside and outside 180 mm - Angle profile web outside 100x100 mm - Angle profile web inside 90x90 mm - Solid material round 75 mm - INP 140 - Shaft diameter 100 mm - Roller diameter 315 mm - Bending speed 5 m/min. - Motor power 11 KW - Weight 2600 kg - module max Wcm3 -400 Volt 50 Hz. 3 ph. -1950x1600x2100 mm