Used Prop for sale (9,967)

Condition: new, Year of construction: 2025, An active lime production line is a set of equipment designed to produce high-quality lime from limestone, with the aim of meeting various industrial applications, such as in the production of steel, environmental desulfurization, and other processes. The process typically involves several stages, including limestone crushing, calcination, hydration, and finally, the production of active lime. Here is a general overview of the main steps involved in an active lime production line: 1. Limestone Quarrying: - Raw limestone is extracted from quarries and transported to the lime plant. The limestone may undergo crushing and sizing processes to achieve the desired particle size. 2. Limestone Preheating: - The raw limestone is typically preheated in a preheater or precalciner before entering the rotary kiln. This preheating step helps to reduce the energy consumption in the kiln by partially decarbonizing the limestone. 3. Loading into the Rotary Kiln: - The preheated limestone is loaded into the rotary kiln, a large, rotating cylindrical furnace. The kiln is inclined at a slight angle to facilitate the movement of materials through the kiln. 4. Calcination: - In the rotary kiln, the limestone undergoes high-temperature calcination (typically in the range of 900 to 1,450 degrees Celsius). This process causes the limestone to undergo chemical and physical changes, converting it into lime (calcium oxide). 5. Cooling: - After calcination, the lime moves through the cooling zone of the kiln, where it is cooled down. This cooling step is essential to stabilize the lime and prepare it for further processing. 6. Hydration: - The quicklime produced in the kiln is then slaked with water in a hydration process to produce slaked lime (calcium hydroxide). This is typically done in a separate hydrator. Nodpfx Ageq Nyzbszedf 7. Separation of Unreacted Lime: - The slaked lime is separated from any unreacted quicklime or impurities. This step ensures that the final product is of high quality. 8. Filtering and Drying: - The separated slaked lime is filtered to remove excess water, and the resulting product is dried to achieve the desired moisture content. 9. Storage and Packaging: - The final product, active lime (calcium oxide), is stored in silos or other storage facilities. It can then be packaged for sale or transported to end-users. 10. Environmental Considerations: - Dust collection systems and other environmental control measures are often implemented to minimize emissions and ensure compliance with environmental regulations. The design and configuration of an active lime production line can vary based on factors such as the type of limestone used, production capacity requirements, and specific industrial applications. Modern production lines often incorporate advanced technologies to optimize energy efficiency, minimize environmental impact, and ensure high-quality active lime production.

Condition: used, Year of construction: 2009, Vollautomatische Hochleisungsstanze - Fully Automatic Punching System KUGLER-WOMAKO ProPunch 50-110 (R)Baujahr / Year 2009 - Serial-No. MK00579 Arbeitsbreite / Working width max. 500mm Format / Sizes min. 120 x 105mm Format / Sizes max. 500 x 500mm Stanzstärke / Punching thickness max. 3mm Mechanische Taktleistung per Minute / Mechanical cycles per minute 110 Cycles/min. Anlegesystem für kontinuierliches Arbeiten / Paper feeding for continuous running Kastenauslage mit Rüttler / Paper output with Jogger Inkl. Handbücher / Incl. Manuals Leistungsaufnahme / Power requirement 4kVA / 3kW Nodpfeiypk Isx Agzsdf Nennstrom / Power 10 A2 Werkzeuge / 2 tools 3:1 - 550 mm lang Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2008, Heating capacity: 9 kW (option: 12/16 kW) Pump capacity (50 Hz) standard: Magnetically coupled, 0.5 kW, max. 4,5 bar, max. 40 l/min Pump capacity (50 Hz) enhanced: Magnetically coupled, 1 kW, max. 6 bar, max. 60 l/min Speed-controlled pump: 1 kW, max. 9 bar, max. 50 l/min Cooling water connection: G 3/8" Nodpfx Agsv Efyzszsdf Mold connection: G 3/4" Power supply: Standard 3 x 380 - 415 V/50 Hz

Year of construction: 2009, condition: ready for operation (used), A Lasercomb CNC high-speed die milling machine is available. Travel X/Y: 1070mm/1070mm, number of spindles: 4, spindle speed: 50000rpm, continuous power: 180W. Dimensions X/Y: approx. 2100mm/1900mm, weight: approx. 430kg. Documentation available. An on-site inspection is possible. Nsdpfx Agjxbrxrszedf

Condition: good (used), mileage: 449,423 km, first registration: 08/2003, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, Year of construction: 2003, Equipment: ABS, = Additional options and accessories = - 1 fuel tank - Armrest - Beacon(s) - Day Cabin - Disc brakes - Electric windows - Front suspension: Leaf - Hub Reduction - Rear suspension: Leaf - Sper - Thick Axles = More information = General information Cab: single Serial number: VF633AVB000101276 Technical information Number of cylinders: 6 Dimensions (LxBxH): 7 x 250 x 280 cm Ndodpfx Agsw Skwvszof Axle configuration Tyre profile: 50% Brakes: disc brakes Suspension: leaf suspension Front axle: Steering Condition Technical condition: good Visual appearance: good

Condition: new, Year of construction: 2025, Driving extra long poles, solar system poles and large diameter poles With the new SolarPro post driver from Rhino, EuroGate International is launching a completely new way of driving posts on the market. This professional attachment, suitable for the most common earth-moving machines, drives a pile with a maximum length of 450 cm into the ground with about 1000 strokes per minute. With a force of up to 1,085 joules, posts up to a maximum diameter of 38 cm are no problem for this powerhouse. Piles are driven vertically into the ground at great speed. These machines are very suitable for solar installations, fencing and road construction. The possibilities are endless. A tough project, even in difficult terrain? No problem for the Rhino SolarPro. Nedpfx Asia N Eqsgzjdf Designed to accelerate the installation of solar farms. The Rhino SolarPro is ‘X and Y axis adjustable’ to ensure accurate, fast and perpendicular driven piles for solar parks and fencing, among other things, regardless of the soil conditions of the construction site or the terrain. This professional construction attachment for construction equipment is designed and built in the USA with the highest quality materials. The SolarPro has a CE certificate and is built according to the standards for the European market. Features and benefits Suitable for posts up to 38 cm in diameter with a maximum length of 450 cm. The hammer and guide hold the post in place for efficient hammering of the post. Uses the existing hydraulic drive of the earth-moving machine and the use of the attachment function eliminates the need for an expensive self-propelled pile driver. This allows you to complete your project on time and within budget. The Rhino SolarPro is equipped with a universal mounting plate for the most common excavators and earth-moving machines. Equipped with modern, Furukawa FX hydraulic hammer Designed for efficient pile driving, reliable hammer with a long service life. Powerful 800 ft. lbs. (1,085 Joules) impact energy per stroke (approximately 1,000 strokes/min.) Features a new and improved piston (larger diameter and longer stroke) increases speed – provides more impact energy.Using the monobloc design, this machine requires less maintenance with only two moving parts. Pole pull function included The SolarPro pile driver offers an integrated pile driver with vibration aid for the toughest applications. By using this function you can remove a knocked-out post in no time at all.

Condition: new, functionality: fully functional, empty load weight: 340 kg, maximum load weight: 1,660 kg, overall weight: 2,000 kg, loading space length: 3,050 mm, loading space width: 1,500 mm, loading space height: 300 mm, Product Information "Anssems PLT2 2000 305x150 PRO Flatbed High Loader" High loader from manufacturer ANSSEMS, model PLT2 2000.305x150 Pro. As standard equipment, the braked single-axle flatbed high loader from Anssems is equipped with all-around drop-down and removable aluminium side panels, robust eccentric locks, interior lashing eyes, profile rails for accessory mounting or load securing, a steel frame, jockey wheel, and a V-drawbar. We also offer accessories for Anssems car trailers such as high tarpaulin, cover tarpaulin, net hooks, mesh extensions, side extension panels, rear support set, box, straps, and anti-theft devices. ----- With us, you can also get: · Financing · Leasing (for business customers only) · Consultancy · Nationwide delivery within Germany (except islands) · Accessories · Rental trailers · Spare parts Ndsdpfswu A Utex Agzef · Registration service for DH – HB – DEL · Service · Repairs · TÜV inspection for car trailers Car Trailer Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Opening hours: Monday - Friday 8:00 am – 5:00 pm

Condition: new, functionality: fully functional, empty load weight: 370 kg, maximum load weight: 1,630 kg, overall weight: 2,000 kg, loading space length: 3,300 mm, loading space width: 1,800 mm, loading space height: 300 mm, Product information "Anssems PLT2 2000 330x180 PRO Platform High Loader" High loader manufactured by ANSSEMS, model PLT2 2000.330x180 Pro. Standard features of the braked twin-axle platform high loader from Anssems include all-round aluminum sidewalls (foldable and removable), robust eccentric locks, internal lashing eyes, profile channels for mounting accessories or securing loads, steel frame, jockey wheel, and V-shaped drawbar. We also offer a range of accessories for Anssems car trailers such as high tarpaulin, flat tarpaulin, net hooks, mesh extensions, side wall extensions, rear support legs, storage box, straps, and anti-theft devices. ----- Additionally, we offer: · Financing · Leasing (for business customers only) · Consultation · Nationwide delivery within Germany (excluding islands) · Accessories · Rental trailers · Spare parts · Registration service for DH – HB – DEL · Service · Repairs Nedowuq S Hspfx Agzedf · Technical inspection (TÜV) for car trailers PKW-Anhänger-Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Opening hours: Monday - Friday 8:00 a.m. – 5:00 p.m.

Condition: used, tank capacity: 2,500 l, GENERAL Construction type: upright Remarks: manhole diameter approx. 390 mm Speed: 950 rpm Internal diameter: 1,590 mm Explosion-proof: Motor is explosion-proof (compliance with current ATEX regulations under local conditions must be verified) Total height: 2,850 mm Power: 9.7 kW Agitator: propeller Base type: feet Njdpfx Agoxqdkrjzodf Location: Bremen Volume: 2,500 liters Product-contacting material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,200 mm Last application: cosmetics TANK Number of feet: 4 pcs EQUIPMENT Manhole / access dome: on top head Outlet: DN50 DIN 11851 Note: slight residue inside MATERIAL SPECIFICATION Foot material: stainless steel AGITATOR 1 Voltage: 380 volts Agitator arrangement: bottom-mounted

Condition: used, Year of construction: 2019, tank capacity: 50,000 l, GENERAL Design: vertical Year of manufacture: 2019 External diameter: 3,600 mm Total height: 5,200 mm Insulation: available Power: 1.1 kW Agitator: propeller Base design: standing ring (stand leg frame) Location: outdoor storage Technical documentation: CE marking and declaration of conformity Volume: 50,000 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: milk TANK Bottom: flat bottom Nodexqdgaepfx Agzodf INSULATION Insulation jacket: welded EQUIPMENT Manhole / dome: in the cylinder AGITATOR 1 Voltage: 400 Volt Agitator arrangement: side-mounted on the cylinder

Condition: used, tank capacity: 15,000 l, GENERAL Equipment: Venting, lifting lugs Design: vertical Remarks: The tank has only undergone a test run with water External diameter: 2,240 mm Total height: 4,850 mm Power: 0.75 kW Agitator: propeller Mounting type: Height-adjustable feet Location: outdoor storage Volume: 15,000 liters Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 3,750 mm Nodjxqdbwspfx Agzjdf TANK Bottom: conical bottom Number of feet: 4 units EQUIPMENT Manhole / Dome: on top cover Outlet: available MATERIAL SPECIFICATION Feet material: stainless steel AGITATOR 1 Agitator position: mounted laterally on the cylinder

Condition: used, tank capacity: 5,100 l, GENERAL Design: upright Remarks: Agitator drive missing; minor dents on the insulation jacket (see photos) Outer diameter: 1,550 mm Inner diameter: 1,400 mm Ndodpfx Aexqdbdsgzof Total height: 4,500 mm Insulation: present Agitator: propeller Support type: feet Location: outdoor storage Volume: 5,100 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,340 mm TANK Number of feet: 3 pieces INSULATION Insulation jacket: riveted Insulation material: mineral wool Insulation thickness: 50 mm EQUIPMENT Manhole / Dome: on top head (DN 500) Outlet: DN50 DIN 11851 AGITATOR 1 Agitator arrangement: eccentric in top head

Condition: used, tank capacity: 7,000 l, GENERAL Equipment: Disc valve, crane lugs Design: upright Outer diameter: 1,800 mm Insulation: available Agitator: propeller Stand type: feet Ndjdpfsxqdaaex Agzof Location: outdoor storage Volume: 7,000 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,500 mm TANK Number of feet: 3 pcs INSULATION Insulation jacket: welded Insulation material: rock wool Insulation thickness: 50 mm EQUIPMENT Manway / dome: on top Outlet: available AGITATOR 1 Agitator arrangement: eccentric in top plate

Condition: used, GENERAL Speed: 945 rpm Impeller diameter: 300 mm Power: 1.3 kW Agitator: Propeller Location: Bremen Nameplate: Shaft diameter: 25 mm Shaft length: 500 mm Product-contacting material: V4A 1.4401/04 (AISI316) Nsdpfx Aexqbzuegzjdf Condition: used AGITATOR 1 Voltage: 220/380 Volt Agitator specifications: The agitators are each bolted to side agitator flanges, made of 1.4571 (V4A), which have been cut out of the tank.

Condition: used, GENERAL Blade diameter: 200 mm Agitator: Propeller Nsdpfx Agjxqby Rszedf Location: Bremen Shaft diameter: 25 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used AGITATOR 1 Agitator manufacturer: Ekato Agitator features: Internal thread; Motor not included; Total length approx. 760 mm

Condition: used, tank capacity: 259 l, GENERAL INFORMATION Equipment: Ball valve Design: vertical Remarks: Handhole diameter 200 mm; minor dents in insulation jacket Speed: 71 - 640 rpm External diameter: 830 mm Internal diameter: 690 mm Nodjxqavkopfx Agzedf Explosion-proof: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Total height: 2,000 mm Heating/Cooling: available Insulation: available Power: 0.34 kW Max. allowable operating temperature: 142 °C Max. allowable operating overpressure: 3.0 bar Max. overpressure: 3.0 bar Top cover: removable / hinged top cover Agitator: propeller type Support design: mobile on castors Location: Bremen Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Capacity: 259 litres Double jacket volume: 18.0 litres Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 470 mm Previous application: pharmaceuticals VESSEL Max. allowable operating temperature: 142 °C Number of feet: 4 pcs HEATING/COOLING JACKET Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole / Dome: handhole Outlet: available MATERIAL SPECIFICATION Thermal system material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR 1 Voltage: 220/380 Volt Agitator arrangement: eccentric in top cover Agitator features: drive adjustable via handwheel

Condition: used, tank capacity: 8,300 l, GENERAL INFORMATION Equipment: Spray head, crane lugs Design: vertical Notes: Manhole diameter 510 mm Rotational speed: 489 rpm Outer diameter: 2,250 mm Inner diameter: 1,980 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Total height: 4,500 mm Heating/cooling: available Insulation: available Power: 2.5 kW Max. permissible operating temperature: 80°C Max. overpressure: 1.96 bar Agitator type: Propeller Support design: Height-adjustable feet Location: Bremen Cylinder temperature control: Double jacket Nameplate: Vacuum: 0.83 bar Volume: 8,300 liters Double jacket volume: 770.0 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,250 mm Previous use: Plant-based pharmaceuticals VESSEL Max. permissible operating temperature: 50°C Number of feet: 4 pcs HEATING/COOLING JACKET Base temperature control: Double jacket Nedjxqatcopfx Agzsdf INSULATION Insulation jacket: hermetically welded Insulation jacket material: Stainless steel EQUIPMENT Manhole / dome: in the top head Note: light residues, manhole cover missing Outlet: 53 mm MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Foot material: Stainless steel AGITATOR 1 Agitator manufacturer: Ekato Voltage: 230/400 Volt Agitator mounting: eccentric in top head Agitator features: Agitator shaft slightly bent; motor slightly damaged

Condition: used, tank capacity: 530 l, GENERAL Features: Spray head Design: upright Remarks: Original drawing available; vessel was modified in 1997 (e.g. change of feet and/or connections); documentation of subsequent pressure test available; modification drawing only available as fax; 1 dip tube inside the vessel Speed: 670 rpm External diameter: 900 mm Internal diameter: 800 mm Total height: 2,250 mm Heating/Cooling: available Insulation: available Power: 0.55 kW Max. permissible operating temperature: 143 °C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 3.0 bar Agitator: propeller Base type: feet, height-adjustable Location: Bremen Technical documentation: drawing, TÜV papers Jacketed cylinder: double jacket Ndodoxqaquopfx Agzof Name plate: Vacuum: 1.0 bar Volume: 530 liters Double jacket volume: 70.0 liters Cylinder wall thickness: 5 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 900 mm Previous application: pharmaceuticals VESSEL Max. permissible operating temperature: 143 °C Number of feet: 4 HEATING/COOLING JACKET Base temperature control: double jacket INSULATION Insulation jacket: welded Insulation jacket material: stainless steel EQUIPMENT Manway / dome: on upper head (DN 400) Outlet: DN80 DIN 11851 Remark: minor residues inside MATERIAL SPECIFICATION Jacket material (temperature control system): V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR 1 Voltage: 230/400 volts TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5 mm Agitator positioning: eccentric, in upper head

Condition: used, tank capacity: 4,413 l, GENERAL Equipment: Crane lugs Design: vertical Remarks: Half-pipe coil only in the upper area of the cylinder and on the bottom; Manway diameter: 500 mm; Speed: 203 rpm Inner diameter: 1,790 mm Total height: 2,890 mm Nedsxqahmopfx Agzedf Heating/Cooling: available Power: 2.2 kW Max. allowable operating temperature: 200°C Max. allowable operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Agitator: propeller Mounting type: feet Location: Bremen Technical documentation: drawing, various documents Cylinder temperature control: half-pipe coil Vacuum: 1.0 bar Volume: 4,413 liters Double jacket volume: 116.0 liters Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,250 mm VESSEL Max. allowable operating temperature: 200°C Heads: dished ends Number of feet: 3 pcs HEATING/COOLING JACKET Max. allowable operating vacuum: 1.0 bar Bottom temperature control: half-pipe coil EQUIPMENT Manway / Dome: in cylinder Outlet: flange DN80 AGITATOR 1 Agitator manufacturer: Mut Tschamber Voltage: 220/380 Volt Agitator arrangement: eccentrically in top head

Condition: used, tank capacity: 733 l, GENERAL INFORMATION Equipment: Spray nozzle, crane lugs Design: vertical Remarks: Device for mounting load cells under the feet (the load cells themselves are no longer present) Ndodpfx Aoxqac Rogzof Speed: 910 rpm Outer diameter: 1,030 mm Inner diameter: 880 mm Total height: 2,250 mm Heating/cooling: available Insulation: available Power: 1.5 kW Max. permissible operating temperature: 150°C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 6.0 bar Top cover: Removable / hinged top cover Agitator: Propeller Support type: Feet Location: Bremen Technical documentation: Drawings, various documents Cylinder temperature control: Double jacket Nameplate: Vacuum: 1.0 bar Volume: 733 liters Double jacket volume: 55.0 liters Product contact material: V4A 1.4435 (AISI 316) Condition: used Last intended use: Pharmaceuticals VESSEL Max. permissible operating temperature: 150°C Number of feet: 3 pcs. HEATING/COOLING JACKET Max. permissible negative pressure: 1.0 bar Bottom temperature control: Double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: Stainless steel EQUIPMENT Outlet: 25 mm MATERIAL CHARACTERISTICS Temperature control system material: V2A 1.4301 (AISI 304) Feet material: Stainless steel AGITATOR 1 Voltage: 230/400 Volt Agitator arrangement: Eccentric, mounted in top cover

Condition: used, tank capacity: 198 l, GENERAL INFORMATION Design: vertical Remarks: Feet fitted with load cells (see photos) Speed: 890 rpm Outer diameter: 640 mm Inner diameter: 486 mm Total height: 2,250 mm Heating/cooling: available Insulation: available Power: 0.75 kW Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 6.0 bar Top cover: removable / liftable top cover Nsdpsxqllkofx Agzsdf Agitator: propeller Support design: feet Location: Bremen Technical documentation: drawings, various documents Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 198 litres Double jacket volume: 28.0 litres Product contact material: V4A 1.4435 (AISI 316) Condition: used Last application: pharmaceutical VESSEL Max. permissible operating temperature: 150 °C Number of feet: 3 pcs HEATING/COOLING JACKET Max. permissible negative pressure: 1.0 bar Base temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Outlet: available MATERIAL SPECIFICATION Temperature control system material: AISI 316 (V4A) 1.4435 Feet material: stainless steel AGITATOR 1 Voltage: 230/400 Volt Agitator arrangement: eccentric in the top cover

Condition: used, tank capacity: 60,000 l, GENERAL Features: Ventilation, Spray Head, Crane Lugs Design: Upright Remarks: Tank feet serve as spacers for substructure/foundation. Small internal repair areas present External diameter: 3,610 mm Internal diameter: 3,500 mm Total height: 7,200 mm Insulation: Present Top: Conical top Agitator: Propeller Location: Outdoor storage Volume: 60,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: Used Cylindrical height: 6,500 mm Ndjdpfxexqdphs Agzjf Previous use: Food industry TANK Bottom: Flat bottom with slope EQUIPMENT Manhole / Dome: In cylinder Outlet: Present Outlet: 80 mm AGITATOR 1 Agitator position: Side-mounted on cylinder

Condition: used, tank capacity: 30,000 l, GENERAL Equipment: aeration/venting, spray head, crane lugs Design: vertical Internal diameter: 2,980 mm Total height: 7,700 mm Insulation: yes Power: 1.5 kW Agitator: propeller Support design: height-adjustable feet Location: outdoor storage Volume: 30,000 liters Product-contact material: V2A 1.4301 (AISI 304) Njdpfjxqdmasx Agzsdf Condition: used Cylindrical height: 4,300 mm TANK Bottom: conical bottom INSULATION Insulation jacket: hermetically welded Insulation material: mineral wool Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: on the top cover Outlet: DN50 flange TECHNICAL DATA / DIMENSIONS Ground clearance: 1,900 mm AGITATOR 1 Voltage: 380 V Agitator arrangement: eccentric, on the top cover

Condition: used, tank capacity: 50,000 l, GENERAL Equipment: Venting/inlet and outlet, spray head, crane lugs Design: vertical Speed: 1460/710 RPM Outer diameter: 3,300 mm Inner diameter: 3,200 mm Overall height: 8,200 mm Insulation: available Power: 3.8/1.0 KW Agitator: propeller Support type: height-adjustable feet Location: outdoor storage Volume: 50,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 6,300 mm Last application: food TANK Number of feet: 6 pcs INSULATION Insulating jacket: hermetically welded Insulating jacket material: stainless steel Nodpfx Ajxqdinegzsdf EQUIPMENT Manhole/Dome: in the cylinder, in the top head (DN 500) Outlet: present Outlet: 80 mm AGITATOR 1 Agitator manufacturer: Stelzer Voltage: 380 volts Agitator arrangement: side-mounted on the cylinder

Condition: used, tank capacity: 30,000 l, GENERAL Equipment: Crane lugs Design: Vertical Internal diameter: 2,488 mm Total height: 7,100 mm Agitator: Propeller Base type: Feet Location: Outdoor storage Technical documentation: Drawing Nameplate: Volume: 30,000 litres Cylinder wall thickness: 6 mm Product-contact material: V2A 1.4301 (AISI304) Condition: Used Cylindrical height: 5,350 mm Last application: Chemical industry TANK Max. allowable operating temperature: 100°C Bottom type: Dished (Klöpper bottom) Number of feet: 4 pcs EQUIPMENT Manway / Dome: In cylinder, handhole Outlet: Flange DN65 Note: Slight residues/adherences Njdpfjxqdh Dox Agzodf TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5 mm AGITATOR 1 Agitator arrangement: Side-mounted on cylinder Top wall thickness: 5 mm